DJI Air 2S Video Banding Issue with Firmware 02.04.20.40
Тәжірибелік нұсқаулар және стиль
I haven't seen this issue before I updated to the latest firmware (at the time - 8/21/21). I'd set the video to 5K 24P and when I looked back at it, there was terrible banding. I did another flight where I set it to 4K 60P and didn't see banding - and figured it was a 5K issue.
However, a couple days later at a different location, I again saw banding using the same 4K 60P setting.
The only thing I can think of is that both cases happened when there was lighting coming from just off camera.
Again, this has never happened before and I've flown in much harsher lighting conditions. I can only assume it's the latest firmware (using same card as always - no other things have changed). Filmed in LOG as I have in the past - again, nothing has changed except the firmware.
Has anyone else had this issue? I might have to send it in to DJI.
Пікірлер: 4
any solution to the problem? I see that on my air 2s too!
@twowheelsandathrottle
2 жыл бұрын
No, I haven't found anything. I haven't flown a lot lately but the few times I have, I've used a circular polarizer and I haven't seen the issue. That could be total coincidence though - I could just not be pointing the direction needed to cause the issue. Let me know if you hear of anything and I'll do the same.
@FramedProductions
Жыл бұрын
Ran into this issue with some footage I was reviewing today. Seems to be an issue with how the lens directs sunlight from certain side angles, which explains why a polarizer seems to help. I don't see it in any of the other dji drones I've flown.
same issue here, i was in 4K 23.976 panning on the beach and banding starts to appear in certain angles to sun. i don't know what is it. here's a clip, second 29 then in second 50 kzread.info/dash/bejne/dnhkr6RroJqvZ7A.html&ab_channel=FernandoGallardo