Thanks, I wasn't sure which to switch to from my V1! great video 👍

For me WTFOS gave a lot of life to the V2 goggles. Even, I think it has more capabilities which includes the analog input. Thank you for this video :).

@Mangorille

Жыл бұрын

Agreed, WTFOS is amazing especially when you install the HD fonts and icons (I have a video on this).

Very well done. Subscribed! 😎🤘

Someone at Dji needs to be kicked in the nuts for naming the Google 2 when there is a Goggle V2. Way to confuse the shit out of new potential customers and force them to question your ability to make good decisions as a company going forward.

@Mangorille

Жыл бұрын

:) Tell me about it! The best explaination I heard about this is that it's kind of like we have the Goggles 1 V1, Goggles 1 V2, and then Goggles 2. The V2 is supposed to still be a Goggles 1. I agree so confusing, especially for those new to the ecosystem!

You didn't mention if you already have the V2 goggles, that it's probably not worth it buying new goggle 2 😆

@Mangorille

Жыл бұрын

Depends on what you're looking for. If you want the best image quality and the goggles work with your face shape, the goggles 2 is better.

Thanks was the exact comparison I was after, thanks

@Mangorille

Жыл бұрын

Welcome. Let me know if you have any more questions.

Great vid man, just what I was looking for, all that info helped me a lot. I wasn’t sure wich one to get when I buy my AVATA.🎉 👍 🎆

@Mangorille

Жыл бұрын

Thanks! Ideally you do a test fit on the goggles 2 before buying so you know exactly how the fitment is on your face.

The fit for the Goggles 2 can be the same as the V2 if you change the cushion and rear strap like you did with the V2. At first I TRULY hated the goggles 2 because of the fit on my nose. The rear elastic strap was tried first and I instantly noticed the nose difference. The new fit was nice that I thought I didn't need/want the cushion, but when the cusion came in the mail, I tested and no more complaints from me. I don't like the velcro attachment used for the cushion, and I look forward to some company making it connect to the goggles like the original.

@Mangorille

Жыл бұрын

Hey. Which cushion did you purchase? The other complaint with these goggles are the blurry edges given the small lenses.

@hamp7803

Жыл бұрын

@@Mangorille , the cushion is some generic made I bought off of Amazon. I believe they were from a seller overseas. I think I paid $10(coupon). The ones I have give an option for $2 more to get the protection cover for thr lens(I didn't get). As far as the blurry edges, that goes away just by adjusting the goggles on your face. I was frustrated at first with the blurred edges, because I knew I carefully adjusted the lens.

@Mangorille

Жыл бұрын

@@hamp7803 Thanks for the details. It really depends on your face shape, I cannot get the blurry edges to go away with my more poiny and oval face.

@hamp7803

Жыл бұрын

@@Mangorille , my question is, when you are making the adjustments for the first time, are the blurry edges there? Another thing, I posted the link to the cushion, but now I don't see it. Did you get it?

How about the signal penetration comparison when hacked the V2 with 1000mW? Any experiences with that? 🤔

@Mangorille

Жыл бұрын

My initial experience is that the Goggle 2 is better at signal penetration. I tried through a brick wall when flying in the backyard, it was a noticeable difference between the Goggles 2 and Goggles V2. Not sure if it has to do with the patch antenna on the Goggles 2 vs. regular omni antenna on the V2. I mention this in the video.

about the old goggles v2, every time I change from an old aur unit to O3 and the other way around, would I need to rebind?

@Mangorille

Жыл бұрын

Been a while since I used the goggles v2 but if memory serves right yes it loses the bind when you switch. Hopefully they fix this in firmware updates.

Do you use the Googles V2 with both the 03 Air Unit and the original Air Unit or Vista? Is it true that you lose binding when you switch from 03 AU to original AU / Vista? so basically you have to re-bind when you switch from new 03AU to original AU / Vista and vice versa. Great comparison video!!

@Mangorille

Жыл бұрын

I only used the V2 with the O3 air unit but other channels have confirmed that you lose the bindings. I even lose the bindings when I switch between the V2 and the Goggles 2 and I have to rebind each time.

@jaechoe

Жыл бұрын

@@Mangorille thank you for the feedback 😊, that will be a PITA. Oh well, hopefully DJI comes up with a fix. Ordered the 03au, now gotta rethink what I put it in. Foxwhoop25 out, binding will be a serious PITA. Also you got major piloting skills, love your flying style!!! New Sub, you the Man-gorille!!!!

For me I was lucky as the Googles 2 fit way better and the quality is insanely good 👍

@Mangorille

Жыл бұрын

Great news, fit and the dynamic range are the biggest issues right now with the Goggles 2 and O3 that have not really been resolved.

Is there any news about Dji mini 2 backwards compatibility with these? Very frustrating the new avata goggles don’t work with the mini

@Mangorille

Жыл бұрын

I haven't heard anything about the mini 2 but did hear a rumor online that the mini 3 pro may work with these at some point.

Sticking with my v2 goggles and using the Dji o3 air unit. Tried the goggles 2 and integra but they weren’t for me.

@Mangorille

Ай бұрын

The v2 goggles are still a great option. You're really just missing out on two main features: the ability to embed the OSD into the goggle video recording and the OLED displays.

id say tht the video quality is only essential if your are a professional drove pilot, else if you are having fun, you dont need to rely on picture perfect systems and you can choose something that will enable you to access the fpv experience if you dont mind reduced quality.

@Mangorille

Жыл бұрын

Always nice to see more quality and detail in the goggles but you're right, not required for flying. The prior DJI system was already really good for flying.

Great review! I ordered today DJI fpv combo I still want to order smaller version of drone with controller what kind of Drone are you using? With this Google's? Thanks

@Mangorille

Жыл бұрын

Did your combo come with the Goggles 2 or the Goggles V2? This is my main quad right now: kzread.info/dash/bejne/e3980bKrqcvcc8o.html

V2 vr goggles 2 for me it would boil down to the shape of your face my goggles 2 fit me 90% perfect im happy with them but goggles 2 dont have any mods out yet. My v2 goggles where like 60% out of the box but after all the mods my v2 are 100% fit now. The small size of the goggles 2 is worth 10% for me

@Mangorille

Жыл бұрын

100% it is so subjective to your face shape so even though I have blurry edges and pressure on my nose, you may not. Only problem is that they've designed the goggles 2 to fit a smaller range of face shapes.

Really appreciate your detailed comparison. I had a doubt, If I get the Googles V2 or the Googles 2 then can I also fly analog with it? I am thinking of having two quads 1. Nazgul HD for freestyle and 2. DJI Avata for Real estate. I also have some old analog quads so wanted to know if the DJI Googles supports analog.

@Mangorille

Жыл бұрын

The Goggles 2 does not have an input so no way currently to connect an analog module to it. You'd need to go with the V2 in your case. But the Avata works better with the Goggles 2 due to the head tracking.

You didn't talk about compatibility With avata air Unit vista ....can bind them all together or need to rebind

@albidry

7 ай бұрын

If I bind o3 then I bind air unit vista...I need to change the mode Then rebind on both or what's the difference of the process

I just got off the phone with DJI, the person told me that the DJI FPV drone was compatible with the goggles 2, it came with the V2 goggles, but I would prefer the new ones, is this compatability correct or was he in error.

@Mangorille

Жыл бұрын

I don't think the DJI FPV drone is compatible with the Goggles 2. There's a compatibility chart here: oscarliang.com/dji-o3-air-unit-fpv-goggles-2/

DO you notice any difference bewteen the v2 having 144hz screens compared to the 100hz on the g2? Some poeple say it´s pretty noticeable

@Mangorille

Жыл бұрын

I do not, but I run the 60 fps high quality mode on both.

for me the dilemma is if i should wait for the goggles lite to release or just get the goggles 2. i already have the o3 air unit and a caddax vista and i really wanna get my digital system up and running, but i have no idea when the goggles lite are coming out cause lets say, if they release in half a year i would just get the goggles 2 right now, but have no way of knowing so i just end up being stuck waiting :/ not pog

@Mangorille

Жыл бұрын

I haven't heard much on the Goggles 2 Lite and considering the limited availability of the Goggles 2 right now, not much of a reason to wait especially if you are convinced that you want the Goggles 2.

@boo7948

Жыл бұрын

yeah i think i might just get the goggles 2 at this point

@boo7948

Жыл бұрын

purchased the goggles 2! cant wait for them to arrive

nice comparison ! But the G2 actually have no patch antenna installed. it's 2 directional at the nose part shaped like a "X". So in total you have 4 singularity antennas, just like V1/V2. Do you still have an AU/Vista? I would like to see someone fly around (freestyle at your usual location would be enough) and compare AU/Vista with V2 and G2

@Mangorille

Жыл бұрын

Thanks for the clarification, you are correct, have since learned that it uses that X shaped antenna plus the two at the top. I do still have a Vista and continue to fly that. What exactly are you looking for in that kind of comparison?

@Mayday_FPV

Жыл бұрын

@@Mangorille I'm still hesitating whether to buy the G2 or the V2. I have already seen 1 video where the penetration/range of V2+Vista is better than G2+Vista. There where a bunch of trees which had an impact on signal btw, you have a new subscriber 🍻

@Mangorille

Жыл бұрын

@@Mayday_FPV Welcome to the channel buddy. Not surprised, the V2 is a really good value right now. Have you tried a set of G2 to see how they fit your face? That may be the deciding factor right there!

Hi thank you for this. What do you think about the future of the big black RC1?

@Mangorille

Жыл бұрын

No problem. I really want them to make the black remote work, it's so much better but I suspect that one is going to be end of life just like the V1 goggles.

@richardruckert7954

Жыл бұрын

@@Mangorille me too. The RC1 is 50% more expensive. It's awkward to carry around, but the gimbals are better. I can't tell if DJI is selling it still (out of stock on site), or if they are just letting retailers get down to a certain inventory level before they announce the discontinuation.

You didn’t mention my main concern about the Goggles 2 which is the ability to get a crisp focus. Other reviews have all mentioned a very narrow “sweet spot” on the Goggles 2. In fact, I cancelled my pre-order on the Goggles 2 this morning because even the Goggles V2 are tough for me to get just right.

@Mangorille

Жыл бұрын

Hey. The narrow sweet spot was mentioned in the video under the Fit category 2:42. Funny enough I also was unable to get a full crisp image on the V2, definitely better than the Goggles 2 but still not perfect. In flight, the non crisp image on the Goggles 2 bothered me less than on the V2.

@sketchpv3080

Жыл бұрын

@@Mangorille Crud, sorry! I was multitasking while listening to the video. Hmm, interesting that during flight the blurry edges is less bothersome than the V2s. Guess I’ll hold off on the Goggles 2 at least until the backwards compatibility firmware is released to the public and a new foam is available. Super excited to add O3 to my non-micro 5”, even it’s it’s for use with my current V2s.

@Mangorille

Жыл бұрын

@@sketchpv3080 No worries bud, I was surprised too. I was ready to return the Goggles 2 after my bench testing until I did a few tests and noticed that it was "acceptable" in flight.

@jayzzz1234

Жыл бұрын

@@Mangorille can you see smaller details with the G2s like power lines and cables, I've always noticed the v2s there hard to see unless your really close not like with naked eye.

@MindRiderFPV

Жыл бұрын

As long as V2 works I will keep them and swap all after G2 has been perfected and when I will have a chance to try them on. Right now I don’t feel the need for change. How’s the controller compared to the old one?

The Googles v2 have head tracking??? Or it's just a featured of the google2?

@Mangorille

Жыл бұрын

Just a feature of the Goggles 2 but the feature does not do anything with the DJI O3 and only applicable to the Avata.

AndyRc made me question the goggles2 I am wanting to get into HD and there are alot of pros and cons especially with vtx weight i fly whoops so hd zero looks good but still breaks up like analog walksnail looks great but 🤔 I'm not sure what gogs to go with lol😫 has anyone experienced the vignetting issue with the goggles 2?

@Mangorille

Жыл бұрын

None of the DJI systems are really well suited for a whoop, they’re too heavy. You can go with a naked (de cased) vista in a 85mm plus but that’s really the smallest practical size. I have the blurry edge issue on the goggle 2. You really need to try them out and see if you can live with how they are. I decided to keep the goggle 2 even with this problem.

@scu-dub

Жыл бұрын

@@Mangorille Thanks man✌🏽

With the new Update for V1 Air Unit and Vista you can use it together with the Goggles 2. So there are backwards compatible. But when you update the V1 Air Unit and Vista are these then still compatible with the Goggles V1. I have V1 and now ordert the Goggles 2 but have not found the answer to this question jet.....So I could continue to use the V1 as a spare or for spectators.

@Mangorille

Жыл бұрын

My understanding is that the backwards compatibility is only available in beta so no one really knows how this will end up working. The beta looks to be a one way upgrade, as in, once you upgrade, you can only use the vista with the V2 and Goggles 2. But again no one knows until the final firmware comes out.

@zefixx6659

Жыл бұрын

@@Mangorille Yes for the moment. But i hope this will be only to put out the backwards compatibility to have more points that will speak for the Goggles 2 to invest in. From a users point of view it makes no sense because the hardware is compatible to V1 Goggles like we all know….

@Mangorille

Жыл бұрын

@@zefixx6659 I don't think the hardware of the V1 goggles and V2 goggles are the same though. For example, the V1 only has 5.8 ghz whereas V2 has both 2.4 and 5.8.

@zefixx6659

Жыл бұрын

@@Mangorille Yes they are different but i mean the V1 Goggles now working with Vistas and Air Units V1 so after the update for the O3 Goggles 2 they should also work like bevor and only add support for the new Goggles 2. but that is not clear at this moment.

@FilipRadelic

Жыл бұрын

@@zefixx6659 if you update your old air units to G2-compatible firmware, they lose ability to bind to V1/V2.

Nice! Can you please add the link to buy the foam and strap? Tia. Rod

@Mangorille

Жыл бұрын

Here you go: www.getfpv.com/dji-fpv-goggles-sponge-foam-padding.html www.getfpv.com/ethix-v3-goggle-strap-black-logo.html Note that there is a HD FPV specific head strap from Ethix as well if you don't want to cut the D ring on your goggles. www.getfpv.com/ethix-dji-goggle-strap-hd-black-w-gray-logo.html

Did you notice the Goggles 2 has a lower refresh rate? How does that affect your flying?

@Mangorille

Жыл бұрын

Not a problem for me as I always run the high quality 60 fps mode even on the Goggles 1.

Wish I knew someone with the G2's and o3 air unit in a quad, I've got the V2s and Vista but I really don't like the form factor of the v2s, I actually prefer flying my analog setups with my HDO2's over DJI v2 setup. Don't want to splash out money on these just to find out they are no use to me.

@Mangorille

Жыл бұрын

Try calling your local shops to see if any of the folks that work there have one that they'd be willing to let you try on. Otherwise, if you purchase straight from DJI, there is a return policy but I believe you have to cover the shipping costs.

So far I bought a pair of eachine V100 from China.. and the Box goggles ev100 from Amazon.. so far I like the Box goggles makes me feel a little closer the other ev100 I feel like I'm looking through little holes to watch a movie really weird

@Mangorille

Жыл бұрын

I used box goggles on my micro whoop, they get the job done but no comparison to a quality dual lens system like what higher end goggles use.

I have a smaller than average cranium, and as a result my eyes are closer together than average as well (when purchasing eye glasses I typically have to by the smallest frames with the narrowest bridge gap available to fit correctly). Often I find it difficult if not impossible to get the individual lens close enough together for me to see clearly with things like older FPV goggles or even binoculars are often too far apart even when folded as close as possible. I also wear prescription glasses and fitting my glasses inside goggles has always been a problem. Given these facts, it looks as though the new Goggles 2 would be the clear choice for me. Narrower face conformity? Built in adjustable diopters, as well as the lens being closer together relatively speaking. Am I correct in these assumptions based on your review? In other words, for someone with the conditions I described, which would you recommend, V2 or Goggles 2? Thanks in advance for any advice you're willing to share and thank you for the video and information!

@Mangorille

Жыл бұрын

Hey. Have you measured roughly the distance between your pupils? Your nose bridge sounds like it would be a good fit for both goggles. Would you consider your face round or flat? The Goggles 2 seem to work better for flatter faces.

@Narada65

Жыл бұрын

@@Mangorille Thanks for the reply! Normal shape to face. I'm fairly lean / fit, so not a round or chubby. Inner pupilar distance is roughly 55mm (I think average is 60ish or so). Every time I order new glasses frames I get a warning that says; "your inner pupilar distance measurement is lower than usual, please confirm this is correct!" LOL I always have to buy the smaller frames available for my glasses in order to fit right. I greatly appreciate you taking the time to help me make the right decision.

@Mangorille

Жыл бұрын

@@Narada65 No problem, it's a big decision. From a IPD perspective, the goggles 2 gets you a bit closer (lowest is 56mm vs. the Goggles V2 which is 58mm). The big question is still weather you have a flat face or not, the goggles 2 is a better fit on folks with a flatter (not fatter) face and a smaller nose bridge.

@bengordon7635

Жыл бұрын

v2 you can fit glasses in is what i use i cannot use adjustable ones my left eye is blurry without glasses even the adjustable ones it is blurry there are not good for astigmatism

@Mangorille

Жыл бұрын

@@bengordon7635 Agreed not good for astigmatism, but you can get custom lenses made for the goggles 2 if you really need them to fly. Same can be done for the v2.

Most other youtubers are reporting with thorough tests that the v2 have better penetration and range than the goggles 2 so confused why you say the other way around. Also v2 don't fog as much, more immersive (with bigger screens/fov), easier to use with physical buttons and more comfortable to wear.. also many report the goggles 2 have blurring and vignetting at the edges making it harder to read osd info

@Mangorille

Жыл бұрын

Are they testing using the stock antenna? With the stock antenna on the V2, the Goggles 2 have better penetration in my use. I haven't had issues with fogging in either the V1, V2, and Goggles 2 but everything else you mention was covered in the video. The fit and blurry edges is very subjective and dependent on your face shape. For me, I have blurry edges in both the V2 and Goggles 2, although worse in the Goggles 2.

Will both of these goggles work with my Iflight Nazgûl evoque nebula pro vista?

@Mangorille

Жыл бұрын

Yes they will. Actually all three versions of the goggles will work with the Vista (Goggles V1, Goggles V2, Goggles 2 with the backwards compatibility firmware installed)

@CVFILMSLLC

Жыл бұрын

@@Mangorille Thank you for the reply.

Thank you for your review! I have several questions: 1) Will original remote (I guess it's V1) that worked with o1 unit, work with o3? I'd like to refresh my FVP drone by upgrading o1 to o3 and I'd like to keep my original remote for a while. 2) What's going on with aftermarket support of Goggles 2 today? I mean if there are already nice and soft pads available. 3) Is it possible to keep the battery behind your head on a strap when you're using Goggles 2? I have Goggles V1, and sometimes it's pretty uncomfortable to keep battery in the pocket. 4) Does the cord falls out the Goggles 2 as easy as it falls out from Goggles V1? I noticed it's easy to suddenly disconnect the cord from V1, therefore you can instantly lose control of your drone. Thank you.

@Mangorille

Жыл бұрын

Welcome. 1 - No, the black DJI remote does not work with the O3. You need the controller 2. 2 - What kind of aftermarket support? There are pads, antenna, etc. available for the Goggles 2 now. 3 - Yes, you can find a strap that has a battery holder or you can zip tie the battery to the strap. It won't do that out of the box but you can get a bit inventive with it. 4 - Yes it falls out even easier, I just zip tie the cable to the head strap loop so that it doesn't get pulled out. I did the same with the Goggles V1. See this: kzread.info/dash/bejne/eIaczNGon9i1pso.html

@yolo-cars

Жыл бұрын

@@Mangorille Thank you very much!! I only wish O3 unit would give us a RTH feature or at least auto landing when you flew your drone back to the initial location.

@Mangorille

Жыл бұрын

@@yolo-cars That's not a feature of the O3 or any of the Digital Video Transmission systems. Betaflight (the Flight Controller software) can sort of do this right now when you add a GPS module to your drone.

@yolo-cars

Жыл бұрын

@@Mangorille Understood. I wonder if Betaflight could at least do safe landing without GPS?

@Mangorille

Жыл бұрын

@@yolo-cars Definitely not, it needs the GPS for the return to home.

I have both V2 and goggles 2 and I can't do goggles 2 because of the lack of recording in 120 FPS on the O3 air unit... 120 FPS just divides perfectly into 24/30/60.... 100 does none of them.

@Mangorille

Жыл бұрын

Good point. I use 60fps mode for this reason. I also use 60fps on the V2/V1.

@killerhurtalot

Жыл бұрын

@@Mangorille I'm fine with 60 fps, but recording in 4k/120 makes the video itself so much better for editing haha... Having the ability to slow down your videos to 1/2, 1/4, or 1/5th speed depending on the base frame rate definitely makes some videos turn out better depending on what it's shot for.

You could also add that for pilots still using analog, the goggles 2 has no video input!

@Mangorille

Жыл бұрын

Agree, the V1/V2 aren't the best for the input though as you add additional latency.

@FilipRadelic

Жыл бұрын

The other way around too, V2 gives you useable video out, whereas G2 can only do it via the DJI Fly App. No way to get HDMI out.

I already have the G2. But I really really really like the design of the GV2. I'm planning to buy the GV2, but is it worth it? Please help me.

@Mangorille

Жыл бұрын

If you already have the G2, you need to see if the potential better fit is worth what you are giving up by going with the V2 (form factor, vivid displays, higher resolution, etc.).

@iannn.f

Жыл бұрын

@@Mangorille Understood. I will stay with the G2 for now. Thanks for helping.

@Mangorille

Жыл бұрын

@@iannn.f No problem. There are a couple of other features that the V2 has right now that the G2 does not so look at those too (such as HDMI out, ability of doing analog input, etc.)

Is the integra googles better than both of these?

@Mangorille

Жыл бұрын

I wouldn't consider the Goggles Integra better as it does have some compromises but it is cheaper and fully compatible with the O3. I made a video on the Integra recently: kzread.info/dash/bejne/pYCp2sijl9KdZaw.html

Been a couple of months since this video was published? Did you sell the V2? If not, which do you use most often? If you have time, please reply

@Mangorille

Жыл бұрын

So this is a very interesting question as I still have the V2 and the Goggles 2. Looking back at the last couple months, I've been flying both of them nearly equally if not maybe the V2 a tad bit more. I really like the HD OSD on the V2 which keeps taking me back there but the image quality on the O3, the portability on the goggles, and the fact that I can so easily record the OSD embedded into the video take me there. Funny enough I use the V2 for the Vista quad and the Goggles 2 for any quad with the O3. Perhaps I'll fully switch over to the Goggles 2 once HD OSD is available for it (I heard DJI is working on it)

@richardruckert7954

Жыл бұрын

@@Mangorille thanks... Which goggle is easier to wear for you? Which goggle is easier on eye adjustments for you?

@Mangorille

Жыл бұрын

@@richardruckert7954 The V2 is definitely more comfortable and easier to wear. What do you mean by eye adjustment?

@richardruckert7954

Жыл бұрын

@@Mangorille hi…by eye adjustment, I ask which is easier on the eyes to focus. If you switched from v2 to g2, or vise versa, after each battery, would you adjust to one or the other more easily?

@Mangorille

Жыл бұрын

@@richardruckert7954 That will be very subjective based on your face shape, but I find I can get better clarity and edge clarity on the V2. On the Goggles 2 I have some blurry edges, in flight it does not bother me because you aren't focusing on the edges anyway but it is a bit disappointing on the bench.

Might be worthwhile to add the latency category

@Mangorille

Жыл бұрын

True, no read out of the latency on the Goggles 2 but believed to be ~40ms vs. the V2's 30ms at 60fps.

@FilipRadelic

Жыл бұрын

@@Mangorille you get latency recorded in SRT files if you turn that feature on in recording settings. HQ mode (60fps) should have same latency on both, but low latency mode (120 on V2 and 100 on G2) should be 2-3ms higher on G2 due to lower refresh rate. Bigger issue that I'm surprised isn't mentioned here is how the screen refresh rate limits your onboard recording options.

I'm newbee in this area, but I don't understend how to connect dji goggles to my custome drone, do I need to buy this dji air unit for this ?

@Mangorille

11 ай бұрын

Which customer drone do you have? Some of the DJI camera drones will now work with the Goggles 2 / Integra.

@andrewandrew5156

11 ай бұрын

@@Mangorille I mean, i'm building my own setup, not from dji. I just want to use their goggles

@andrewandrew5156

11 ай бұрын

@@Mangorille Well, I don't have it yet. I want to built my own, but I don't understand how to get dji goggles on it

@Mangorille

11 ай бұрын

@@andrewandrew5156 Ah, so you mean a custom drone and not a customer drone. You'd need a video transmitter, there are different ones available from folks like Walksnail, HDZero, DJI, etc. You'll need to do some research and see which is best for your budget and use.

Picked up a set of V2 on ebay $220 and the Goggles 2 for $400 and the winner is the Goggles g2 ,, they are far far superior ,, The thing that sold me on the goggles 2 is the pixels .... The V2 you can see al the pixels clear as day ,, its like looking at a magnified phone screen ,, where as the G2;s you can barely see any pixels ,, so much clearer and better for flying close to the ground ,, G2 all the way ,, my V2's just sit in the case now

@Mangorille

Жыл бұрын

Wow great price, that's how much V1 goggles are going for.

@bengordon7635

Жыл бұрын

@@Mangorille I been meesing with this air unit OMG its the best the 4:3 you can see everything you got to get one kzread.info/dash/bejne/epWDm7Jqd6e1gZM.html

@Mangorille

Жыл бұрын

@@bengordon7635 Isn't that really just the same as the original air unit but with a much smaller camera?

@bengordon7635

Жыл бұрын

​@@Mangorille its native 4:3 1920 x 1080p 120 fps camera to a 720p 120fps output for tall picture and more of a fish eye lens not sure of the technical part but obviously if they will not sell the camera separate from air unit must be a reason . The falcon unit is way smaller and lighter then the original dji air unit I sent links to those nerds to do a tech review but its not the 03 so they will not waste time on it I do things for me and man its so fast and I always fly analog so the HQ mode sucks but at Low quality 50 mb mode it screams i mean when your flying as fast as you can you can still see the rocks on road also fast clean image and the falcon is so so close in speed the lens makes a huge difference for hitting holes and tight spot 16 x 9 is no good like the 03,,, also falcon has a rolling shutter to limit color shifting in shady areas the 03 is really made for cinematic not freestyle have the 03 in my protek35 and the falcon blows it away for freestyle hands down so much brighter cleaner image ON LOW QUALITY mode , the 03 is better in high quality mode cinematic stuff and recording

@bengordon7635

8 ай бұрын

They discontinued the Falcon unit caddx , the falcon is not compatible with any other vista unit ,,, use the falcon has the micro cam ,,, ,,@@Mangorille

Features V2, 120fps and wtf-os?

@Mangorille

Жыл бұрын

True, 120fps vs. 100fps. WTF-OS will not work once you upgrade the goggles to the version needed for the O3 air unit.

@Alin.Victor

Жыл бұрын

@@Mangorillet will work if you are rooted before the upgrade. I was rooted, i upgrade for the O3, then reinstall root and wtf. Working perfect.

@scrappyfpv

Жыл бұрын

@@Mangorille if you have rooted prior to the upgrade yes it does. :)

@Mangorille

Жыл бұрын

@@Alin.Victor Awesome good to know, thanks!

If you want nose pain and 1080p - G2 If you want no pain and 810p - V2

@Mangorille

Жыл бұрын

nose pain = eye gain ;)

@changeagent228

Жыл бұрын

@@Mangorille Lol. I just got up and my nose hurts to touch. The G2's are like some newly discovered medieval torture device. 😖😅

@Mangorille

Жыл бұрын

@@changeagent228 LOL. Did you try running the head strap looser? It doesn't need to be as tight as on the V1/V2.

@changeagent228

Жыл бұрын

@@Mangorille Yep tried every combination. Right now I am running with no shroud at all in super light leak mode lol. I have ordered a silicon shroud which I am going to cut the nose out of when it arrives and see if it's better. If not I might just stick some tape round the edges to keep the light out and make do. 😂

@Mangorille

Жыл бұрын

@@changeagent228 Oh boy that sounds super uncomfortable! This is the challenge with fit, so subjective and based on your face shape.

video of inside the goggles?

@Mangorille

Жыл бұрын

You mean DVR video of the flight or video of how faceplate, etc. looks?

@patrickfrensdorff7485

Жыл бұрын

@@Mangorille how to screens look while u fly compared to the older models. Less screen? more? better sight? greater angle? Less?

@Mangorille

Жыл бұрын

@@patrickfrensdorff7485 The FOV is a bit lower on the Goggles 2 than the V1/V2 but the resolution and colours are way better. Your experience with the Goggles 2 will depend on how well they fit your face. For me, I get some blurry edges, doesn't bother during flight but a bit disappointing. Check this page out: oscarliang.com/js/fpvgogglefov.html

@patrickfrensdorff7485

Жыл бұрын

So it ain't worth the 900 euros it is costing here in Holland. Thanks for the reply.

But wtf is it and what can you do with it

@Mangorille

Жыл бұрын

FPV goggle for drones.

You are forgetting about range and also the air unit used and the firmware used as well. I do not feel your testing is even close to being complete. But nice push for the goggles 2.

@Mangorille

Жыл бұрын

Both were with the new O3 air unit on the same quad so that is a constant. Only the goggles were changed. Not a long range flier so will let others test that aspect.

@ror-ys3qp

Жыл бұрын

@@Mangorille look at the link I show. He shows V2 much better range than the g2

They just needed like 5mm more on the nose area...

@Mangorille

Жыл бұрын

Yup, make the whole thing 5mm bigger and we're set!

Over time your face will change its shape to adapt the new dji goggle 2. But u will have to walk around with a goggle face mold 247 😂

@Mangorille

10 ай бұрын

Haha, not sure I want something like that to happen.

I think v2 + iflight antenna means almost the same price for 2 version

@Mangorille

Жыл бұрын

Ya, it seems like you get better antenna setup or at least something with the Goggles 2 system that gives you better range/penetration.

Personal opinion ... The V2's are still better. For now.

@Mangorille

Жыл бұрын

Having had both for over 6 months, I don’t see any of them as perfect. In the end I went with the Goggles 2 as my daily flier and sold the Goggles v2

you have no clue