DJI Goggles 2 Caddx Vista Backwards Compatibility Bench Testing | NOT All Sunshine and Rainbows...
Ғылым және технология
The latest DJI Digital FPV firmware released today, giving us the ability of connecting the Caddx Vista and Air Unit to the new Goggles 2. Let's take a closer look at what exactly was included in the official release and whether all is well!
=========================
Items suggested in this video
=========================
My Favorite Screwdrivers (Wiha Slotted & Phillips):
Amazon US: amzn.to/3tq15Eu
Amazon Canada: amzn.to/3E1Ph02
DJI FPV Goggle V2:
Amazon US: amzn.to/3H9FGZk
Amazon Canada: amzn.to/3VLHQlY
DJI FPV Remote Controller 2:
Amazon US: amzn.to/3EPa8oJ
Amazon Canada: amzn.to/3XJRZ4w
DJI O3 Air Unit:
Amazon US: amzn.to/3WZnupK
Amazon Canada: amzn.to/3jJszUR
GetFPV: bit.ly/3ioEE1s
Anker USB Type C Cable
Amazon US: amzn.to/3F0QWUZ
Amazon Canada: amzn.to/3XRlzFd
XING2 1404 4600kv Motors:
Banggood: www.banggood.com/custlink/mG3...
GetFPV: bit.ly/3GQa7mz
iFlight 20x20mm F7 Flight Stack:
Banggood: www.banggood.com/custlink/3vK...
GetFPV: bit.ly/3vLrWx3
XING2 2207 Motors:
Banggood: www.banggood.com/custlink/3D3...
GetFPV: bit.ly/3XiAvuR
iFlight 30x30mm F7 Flight Stack:
Banggood: www.banggood.com/custlink/vKv...
GetFPV: bit.ly/3H0THbr
============================
Videos you may want to check out
============================
Playlist: DJI O3 Digital FPV System | Reviews, Guides, & How Tos
• DJI O3 Digital FPV Sys...
#djifpv #fpv #drones
Mandatory Disclaimer: I participant in the Amazon Services LLC Associates Program, which is an affiliate advertising program designed to provide a means to earn fees by linking to Amazon.com and affiliated sites. Item suggestion links above are affiliate links and I will receive compensation if you choose to use them. There is no cost to you to use these links and any compensation received goes right back into the channel
Пікірлер: 205
YOU DO A GREAT JOB OF EXPLAINING ISSUES
Thank you I even tried looking for this at Bardwell and Mads and then found yours and it finally worked thank you 🙏
@Mangorille
3 ай бұрын
Welcome. Happy flying!
Thank you for doing this!
@Mangorille
Жыл бұрын
No worries!
Interesting. We've been taking a wait and see position on this after it was mentioned that it was a possibility on other channels.
@Mangorille
Жыл бұрын
I think a few more firmware releases are necessary to iron out the kinks, no different than what we experienced with the original DJI system in 2019.
Great comparison! The Vista camera has so much more dynamic range ofer the darker image of the O3. That i was not expecting! Not sure what i have to think about that. I love how my Vistas ans Air unit V1 with the original DJI cameras are...
@Mangorille
Жыл бұрын
In flight the shadow details are not as noticeable or troublesome. The system tends to over expose and correct for those (although causes other issues instead!) The O3 system reminds me of how the original system was when it first released, did some really amazing things but there were some kinks. Those kinks eventually got worked out and by the V5/V6 firmware, it was a solid system. I think we need a similar kind of refinement here with the O3. Hopefully be V2/V3 of the software we'll be there.
By the way u earned my sub ✌️ thank u
@Mangorille
Жыл бұрын
Welcome to the channel!
Glad to see this actually happened. Will I need to use the Googles 2 to use the Controller 2 with my Vistas or can the Goggles V2 along with the Controller 2 and Vistas?
@Mangorille
Жыл бұрын
Ya, felt good seeing DJI finally deliver! Right now the backwards compatibility only works with the Goggles 2. We will have to wait and see how and if this changes in the future.
You know what makes the vista alittle more nice for flying. The way you can see the bottom of the stair case more clearly. The image does look nice i the 03 unit as well. Only thing I just realized was it didn't handle the dark area in tht room
@Mangorille
Жыл бұрын
True, the imagine is generally brighter and brighter shadows on the vista.
Thx for the informative vid! I'm waiting on a vista drone to arrive. It's my first caddx vista and am excited. Curious if you still have to go through the dji flysafe approval and all that to "responsibly " fly in those areas like the avata or my mini 2 won't even arm in a restricted area without the fly safe approval.
@Mangorille
Жыл бұрын
No, the vista and O3 air units do not have those safety features embedded and will not stop you from arming and flying. You should still look to follow your country's safety guidelines and requirements though.
@dustinpugh8222
Жыл бұрын
@@Mangorille thanks. And certainly!
How is the O3 image quality higher? The colors are more saturated, yes. But this is just sensor settings. It actually makes it harder to see details in darker areas. For example, compare the text on the canister on the shelf in the center. You can hardly see it in the O3 image.
@Mangorille
Жыл бұрын
Hey, it's the difference in FOV between the two. The image itself is higher resolution. Email me and I can share some larger jpeg captures so you can zoom in and stuff.
I'm an old school that only had analog for years. Any hd picture is a blessing. Now everyone is being very picky. Crazy. Lol
@Mangorille
3 ай бұрын
So true, I remember dji only having 25mbps initially as well. How quickly we yearn for more!
Can you bind the caddx wth DJI FPV Goggle V2 with FPV remote Controller 2 with Caddx, or only with DJI Goggles 2? I can get the FPV Goggles V2 to work with Caddx but not at the same time with the FPV Remote controller 2, which seems a little dumb of DJI to me..
@kringtheking2657
Жыл бұрын
Did you get it to work ?
So if I want to switch from/to vista vs O3 the Remote2 connection is lost? That s*cks 😢
Tell you what.. i just bound my vistas to my integras and its very similar, if not the same to my v2s. Yes, range may not be identical due to the antenna differences but i think this is more of a use case situation…im satisfied w the results for my needs but still have more penetration testing to do
@Mangorille
9 ай бұрын
Same, I've since made the Goggles 2 my only goggles and been using the O3 and Vistas with this setup. More than happy and never ran into an issue with loss of video in my use case.
I'm on the latest firmware but I dont see the option for dji fpv air unit, just the o3 and avata. Any idea what's wrong?
@Mangorille
8 ай бұрын
Which goggles? I haven’t upgraded to the Sep 25 firmware as there’s really nothing there in the release notes for non dji drones.
Why wasn’t your osd displayed on your vista but it was on your O3 unit I’m having trouble getting my osd setup with my vista unit ??
@Mangorille
Жыл бұрын
I didn't have the Vista connected to a flight controller. It was just a bench test. Did you try following this video here: kzread.info/dash/bejne/fX2d1ZahcsLKpbQ.html
Hi can we use the FPV remote to work with Old air unit or vista? and 03? Now can we switch over from a Tango 2 radio with CRSF and FPV remote on a same quad?
@Mangorille
Жыл бұрын
You mean the black one or the gray one? Only the gray one works with the O3 or the backwards compatible vista firmware.
Since I can use goggles 2 with caddy vistas, I can't use dpi fav remote 1 but I can use tbs crossfire remote correct?
@Mangorille
Жыл бұрын
Correct. Once you upgrade to the firmware that lets you use the Vista with Goggles 2, only the DJI Remote Controller 2 will work. But you can use any other remote with a separate receiver such as a crossfire or ELRS.
I’ve got everything updated and bound, but it will not show up in the receiver tab of beta flight. What am I doing wrong? To clarify, the goggles are bound and work perfect with great video feed the remote controller two is bound, but will not arm the drone and is not seen in beta flight receiver tab..
@Mangorille
5 ай бұрын
Check out this video: kzread.info/dash/bejne/po2jz9p6krSdhtY.html
Hi man. Have youtube tried to fly with vista and the grey dji remote controller 2 together? I and many can’t get it to work. It can’t even remap buttons in beta flight. If you know how to make it work please tell us or make a video about it❤️
@Mangorille
Жыл бұрын
Ya it works. Check out this video. You don't remap buttons, you leverage the existing buttons to assign modes to it. Same as what we had to do with the fpv controller 1 (black DJI remote): kzread.info/dash/bejne/po2jz9p6krSdhtY.html
Can you use the new small gray radio and the old v2 big goggles together with a vista?
@Mangorille
6 ай бұрын
No. If you want to use the v2 and the gray remote, you’ll need an o3 air unit. The vista and gray remote only work with the goggles 2 or Integra.
@dnafpv
6 ай бұрын
@@Mangorille thanks man. At least I can stop pulling my hour out trying to figure it out now lol happy new year
@Mangorille
6 ай бұрын
@@dnafpv :) Happy new year
Hello, how to record goggles screen? Tks.
@Mangorille
Жыл бұрын
With the backwards compatibility firmware (Dec 8th), you need to manually start the recording each time. There isn't yet an automatic "record on take off" option. Pull down the top menu on the Goggles 2 and press the record icon.
hi could I use the cadex viasta to fly the drone with or I have to install a reciever to the drone too? thank you
@Mangorille
Жыл бұрын
You're referring to the backwards compatibility firmware shown in this video correct? Backwards compatibility is the firmware that makes the vista work with the Goggles 2 / Goggles Integra. If so, yes, you can use the FPV Controller 2 (Gray remote) instead of a separate standalone controller like a Crossfire/ELRS.
I have the goggles 2 which for now seem to have the most options and the Grey remote controller. I just ordered the black dji fpv remote waiting for it to come in the mail. For a drone that I want to get that has caddx Vista. Now I am thinking I could have gotten the Grey one to work with it. Oh well picked it up half price 🙄. Hey it will save me from having to rebinding the remote when I switch drones.
@Mangorille
Жыл бұрын
I like the black remote way more but it is end of life, very unfortunate. I've since switched over to an independent control link with crossfire and elrs.
Thanks for this, when using my older Air Units and Vistas with the Goggles 2,,, will my Inav OSD still work ok? Thanks!
@Mangorille
Жыл бұрын
Sorry don't have experience with INAV but the BetaFlight OSD works the same as the O3.
@willay747
Жыл бұрын
@@Mangorille ok thanks, inav should work then
@Mangorille
Жыл бұрын
@@willay747 Welcome, happy flying
So, there isn't any way to use this with Goggles V2 and the fpv controller 2?
@Mangorille
Жыл бұрын
Correct not at this time. The backwards compatibility firmware that works with the controller 2 only works with the goggles 2. Perhaps in the future.
Nice video. Trying to update the firmware on my remote and the consumer drone assistant does not recognize it.
@Mangorille
Жыл бұрын
Can you double check that you have the latest and correct software? You want this one: www.dji.com/downloads/softwares/dji-assistant-2-consumer-drones-series
@brent2327
Жыл бұрын
@@Mangorille thank you so much for the reply. I just tried the same app on a windows Pc Vs the Mac. The PC version recognized the controller and I was able to update it. Just flew for the first time and wow. I was able to sit in my living room and fly around my house with no signal interruption and full strength on the OSD
@Mangorille
Жыл бұрын
@@brent2327 No problem happy flying!
do this thing work in the goggles v2?
@Mangorille
Жыл бұрын
Not currently, the backwards compatibility firmware only supports the Goggles 2. Hopefully we get a firmware that will support the Goggles V2.
I am trying to update the firmware of vista air unit with DJI assistant 2 (DJI FPV series) but I am getting the error message "Cannot load Firmware List (4-10) Please Retry? any help here please
@Mangorille
Жыл бұрын
Sorry to hear that, I just updated a Vista using the same software an hour ago and it worked. Perhaps try getting the latest DJI Assistant 2 (DJI FPV series) from DJI's site.
@darwinortiz7
Жыл бұрын
@@Mangorille it was working 2 hours ago. I am wondering if maybe the server is down or something. it doesn't work in any of my vistas
Mangorille have you seen a red error in the goggles saying "Country code not updated" is there a fix for this ? Thanks
@Mangorille
Жыл бұрын
I haven’t. Did you already connect the goggles to the computer to upgrade and activate it?
I have no Osd from the drone like I did b4. The only thing showing is the dji osd. How do I fix that? Also how do I bond to the v2 remote. Mine is not binding when pressing the bind button on the vista. Remote just beeps. Thanks for your help
@Mangorille
Жыл бұрын
Did you update the firmware on all devices including the controller 2?
@CopterTube
Жыл бұрын
@@Mangorille remote no. I do that with dji assistance right? Also, will I be able to see all fc osd? All I saw was dji osd. Thanks
@Mangorille
Жыл бұрын
@@CopterTube Use the Assistant 2 (Consumer Drone Series) to update the remote. Check out this video on how to setup the MSP canvas mode for the OSD elements: kzread.info/dash/bejne/fX2d1ZahcsLKpbQ.html
Hi! I have a Caddx Vista air unit binded with the DJI Goggles V2. With the firmware my caddx vista, can i now use DJI RC2? Or it’s only doable with the DJI Goggles 2?
@Mangorille
Жыл бұрын
The firmware that makes the vista work with the FPV Controller 2 currently only works with the Goggles 2. Only the O3 can the Goggles V2 and RC2.
@spacemonkey986
Жыл бұрын
@@Mangorille thanks this also answered my question any update to this?
@Mangorille
Жыл бұрын
@@spacemonkey986 The only update is that now this works with the Goggles 2 and Goggles Integra.
dji goggles 2 +grey remote control 2 + caddax vista will run well??
@Mangorille
5 ай бұрын
I didn't like the grey remote when I tested it last year because of the smaller gimbals and some signal issues. I hear that the newer firmware has resolved some of the signal issues but I moved over to ELRS a while ago. Check this out: kzread.info/dash/bejne/g4akqpWcaaqTiZc.html
Hi, can I use caddx nebula pro with dji controller 2 and dji goggles v2?
@Mangorille
Жыл бұрын
Hey. Not currently, you'd need the backwards compatibility firmware to use the DJI Controller 2 and that firmware currently only supports the Goggles 2.
Is it compatible with the old airunits or just vistas
@Mangorille
Жыл бұрын
Old air units and vistas. You lose the onboard recording with the old full size air unit though. Goggle DVR only.
Quick question. Can someone tell me why my video recording is not working when I arm on my goggles 2 ??? Thank you
@Mangorille
Жыл бұрын
Do you have the Auto Record on Takeoff option activated? It's under Settings > Camera > Advanced Camera Settings
@AlexG-yo4bs
Жыл бұрын
@@Mangorille in settings I have only camera option, no advanced settings. And when I enter the camera it has record with googles and that option is not even active. Recording button is working on my dji remote, but no auto recording option in the goggles 😮💨
what about with FCC in Vista and Goggles 2?
@Mangorille
Жыл бұрын
You mean the file hack that forces it into FCC mode? If so, yes, it works and you can use the ham file, similar to what works with the O3 and Avata.
Hey guys has anyone managed to get the DJI FPV controller 2 with the cadex vista. I cant get it to bind. With the googles 2 yes it works but when i go to bind with the controller i cant seem to get it to bind and at the same time i lose connection/bind with the googles 2
@Mangorille
Жыл бұрын
Hey. Did you make sure to update the firmware on the Controller 2?
how do you find the latency of 03 compare to vista using G2
@Mangorille
Жыл бұрын
I don't notice much of a difference for the type of flying I do. I also tried the O3 system in the low latency mode (4k/100fps) and still felt the same for my old eyes/fingers.
What if you have multiple vistas, do you need to rebind to each when you change on goggles and remote? Thanks
@Mangorille
Жыл бұрын
Haven't tried on multiple vistas but the Remote Controller 2 seems like it will need to be re-binded. My experience has been that it seems like it can only bind to one device at a time.
@KK-ol5ov
Жыл бұрын
@@Mangorille that would really suck, perhaps it is better to get a dedicated tx and rx setup.👍
@Mangorille
Жыл бұрын
@@KK-ol5ov Yes, not to mention some of the other weird behaviour with that remote. I've already moved over to crossfire. kzread.info/dash/bejne/g4akqpWcaaqTiZc.html
Well perhaps the question now is what about the new video "Air units" been compatible with the old goggles???
@TillmannHuebner
Жыл бұрын
Not gonna happen cuz goggles link to controller, they would have to support the old controller as wll
@AlfieDoug
Жыл бұрын
@@TillmannHuebner I don't and never will use the DJI controller ( I use TX16S and crossfire ) but would love to be able to use the 03 with my goggles V1, I don't think you need the controller to use this update.
@Mangorille
Жыл бұрын
@@AlfieDoug I really want to be wrong here but I don't think it's going to happen.
@AlfieDoug
Жыл бұрын
@@Mangorille Not by DJI but this firmware release may give the WTFOSD team something new to work with.
@Mangorille
Жыл бұрын
@@AlfieDoug Fingers crossed. I have a really good condition V1 goggle that I'd like to continue using.
have a Vista latest update, remote controller 2 latest update and goggle 2 latest update, the glasses connect, can see the picture, the remote controller decreases, but no transmitter is recognized in betaflight? what do I have to change?
@Mangorille
Жыл бұрын
Do you see the RC signal indicated on your goggle DVR? If so, it sounds like perhaps you didn't align the protocols between what you setup in the goggles and what you have in Betaflight. I.e. are you using SBUS Baud Fast or not
@Wolltan
Жыл бұрын
@@Mangorille GREAT ! THX ... yes fast baud was to blame! Is there no way to let the OSD go on via Betaflight? At least as before just the important things?
Getting a betaflight 4.4 warning vtx table has not been set up correctly and without it vtx control will not be possible. Using DJI goggles 2 with updated caddx firmware for compatibility. Only getting a max of 5-7mbps output from vtx. Any ideas or solutions?
@Mangorille
Жыл бұрын
The VTX output tables do not apply to DJI. You can even remove that option in your cloud build. When you’re getting that low mbps, is the quad armed and how far away are you?
@joseantoniofaria77
Жыл бұрын
Hello, I have the same problem. I have done everything and vtx blocks at 7mps, how do I solve it?
@josefffpv
Жыл бұрын
@@joseantoniofaria77 once i armed the quad the mps it went up tp 45-50 range
hi! i cant bind my dji fpv controller 2 to vista, goggles link to it, controller looks like link, in goggles menu show that contrloler link but when i try to open betaflight software tottaly not reacting on controller movement. maybe u can hel or advice something? regards!
@Mangorille
Жыл бұрын
It works, I've tested it out. Assuming you've upgraded all the firmware including the remote controller 2... Are you sure you are using the same controller protocol in Betaflight as setup in the Goggles 2? You have an option to use regular mode or SBUS Baud Fast. Make sure you are using the same in both otherwise it will do what you're seeing.
@alexeikonev8020
Жыл бұрын
@@Mangorille ok I will check it out, thank you so much. It is possible that the connector from the fly controller is not connected to vista? Because my nazgul is with tbs crossfire
@Mangorille
Жыл бұрын
@@alexeikonev8020 I think it is a Betaflight setup issue if it came setup with crossfire to begin with. I'm uploading a video that will hopefully help you. Check the channel later tonight.
@alexeikonev8020
Жыл бұрын
@@Mangorille thank you so much dude!!!
Which camera was connected to Caddx Vista? Thx
@Mangorille
Жыл бұрын
The original DJI camera, the one you see in the thumbnail of the video.
Still can't get my controller 2 to bind. Goggles 2 bind up no issues. Any ideas?
@Mangorille
Жыл бұрын
You can't get it to bind or you can't get it to register any stick inputs in Betaflight?
@tbone13k
Жыл бұрын
@Mangorille won't bind, Vista wired up to rx3 and betaflight uart 3 set to serial rx. Fast baud on on controller and goggles. Vista on version 1000.06.008
@Mangorille
Жыл бұрын
@@tbone13k How do you define "won't bind"? If it won't bind, that's not related to wiring or betaflight setup.
So wait if you up date the old airunit or caddx vista you can only use the fpv controller 2 and the newer goggles?
@Mangorille
Жыл бұрын
Correct, but you can no longer use it with the Goggles V1/V2 or the Black DJI remote. You can always downgrade but DJI has drawn a line in the sand here on how they are treating the old generation air units.
@dnafpv
6 ай бұрын
@@Mangorilleso you can’t use goggles v2 with the small gray radio and vista?
@Mangorille
6 ай бұрын
@@dnafpv Correct, you can't
Thx.. What you think, does they will put firmware for Google v2 + Vista+ O3 Air ????
@Mangorille
Жыл бұрын
Ya I suspect it will come. You can already use the Goggles V2 and the O3 Air Unit.
@MrEdoben
Жыл бұрын
@Mangorille Does I can use Google v2 with two different drones one with vista ,other with O3 Air unit. Somewhere I see but it must bind every time when you change drone. Please explain me because can't find this info. Thx again
@Mangorille
Жыл бұрын
@@MrEdoben Will test on the latest firmware and let you know tonight.
@Mangorille
Жыл бұрын
@@MrEdoben Still an issue. The Goggles V2 will lose the binding when you switch between the Vista and O3 even on the latest firmware. You will need to rebind both each time you switch.
@MrEdoben
Жыл бұрын
@@Mangorille thank you were much 👏👍
why can't you see the osd in the caddx vista? Is a downgrade necessary?
@Mangorille
Жыл бұрын
Did you turn on the MSP Displayport? kzread.info/dash/bejne/fX2d1ZahcsLKpbQ.html
@bernardogalvano9043
Жыл бұрын
@@Mangorille yes all procedure
Could you tell me the way how to bind the Vista to Goggles 2? Is there any official guide?
@Mangorille
Жыл бұрын
Joshua Bardwell has a guide on this but it's fairly straight forward. Put the Goggles 2 into the FPV System mode (use the switch mode option in the menu), press the bind button inside the goggles in between the two lenses (it will start beeping), power on the vista and press the bind button.
@variable0
Жыл бұрын
@@Mangorille Thanks for your kind explanation despite of this simple process. One thing I missed was updating firmware of Caddx Vista module to V01.01.0000 by using 'DJI assistant 2 (FPV)'. After I got this, binding was successful. Happy new year.
@Mangorille
Жыл бұрын
@@variable0 Great, happy new year and happy flying!
Mine still doesnt work my dji version 2 its on the highest firmware its not connecting to vista right now
@Mangorille
9 ай бұрын
When you say dji version 2, are you referring to the Goggles V2 or Goggles 2?
@prabeats5929
9 ай бұрын
@@Mangorille my remote fpv 2
@Mangorille
9 ай бұрын
@@prabeats5929 Which goggles and air unit do you have?
How do I get all the Betaflight telemetry on the screen?
@Mangorille
5 ай бұрын
Do you mean in the video recording or on the screen while you’re flying? Which goggles and air unit do you have?
@coptercowboyquadcopter1474
5 ай бұрын
@@Mangorille On the screen, I've got it working now but haven't tried a recording yet. It's goggles 2 with vista.
@Mangorille
5 ай бұрын
@@coptercowboyquadcopter1474 You want the instructions for something called MSP Canvas Mode. I've got a video on my channel on how to set it up. It should record in the video as long as you turn on that setting in the goggle menu. The Goggles 2 and Goggles Integra support embedding the OSD into the goggle recording.
My v2 controller still doesn't work with vista.
@Mangorille
Жыл бұрын
Did you make sure to update the firmware of the controller 2? They work, I’ve tried.
How to setup up auto DVR recording? Do we have to pull down top menu each time to record?
@Mangorille
Жыл бұрын
No, there's a record on take off option in the settings you can activate. With this option on, the recording happens automatically once you arm and stops once you disarm. I'm away from the goggles but let me know if you can't find it and I'll check exactly where it is.
@outboxfpv4360
Жыл бұрын
@@Mangorille I coudnt find that option. Need help
@Mangorille
Жыл бұрын
@@outboxfpv4360 On the Goggles 2 you go to Settings > Camera > Advanced Camera Settings > Auto Record on Takeoff
@outboxfpv4360
Жыл бұрын
@@Mangorille working with Caddx Vista?
@outboxfpv4360
Жыл бұрын
@@Mangorille Hi there is not Advance camera settings under Camera... As i said i dont have 03 or avata as of now. So checking with vista
How can I connect my fpv controller v2 ?! It still won’t work, am I doing something wrong g?!
@Mangorille
Жыл бұрын
Did you update the firmware of the controller v2?
@crank_FPV
Жыл бұрын
@@Mangorille yes updated controller and goggles 2. Vistas work on goggles and my elrs tx still work but can’t seem to get the dji tx to work. It’s “binding” but then I looke in betaflight and have no stick inputs
@alexeikonev8020
Жыл бұрын
Will be good if you can make a video on how to bind the controller and VISTA. About it still don't have any information
@Mangorille
Жыл бұрын
@@alexeikonev8020 What issue are you having? I've never had an issue with binding the controller 2.
@Mangorille
Жыл бұрын
@@crank_FPV Usually that is caused by having a different protocol setup in Betaflight vs. in the Goggles. Check the Control section of the goggles configuration to make sure it matches what you have done in Betaflight. As in if you are using SBUS Baud Fast in the goggles setup, make sure you have Betaflight setup the same.
You don't need to use DJI Assistant 2 (FPV) ever again. In fact, DJI is expecting everyone to simply use (Consumer) for all of their drones and systems going forward.
@Mangorille
Жыл бұрын
You mean after you install the backwards compatibility firmware on the Vista, correct?
@MurdersFPV
Жыл бұрын
@@Mangorille no, like you don't have to use the FPV version and all. Consumer will upgrade the Vista for you now.
I updated my v2 goggles to 607 version by accident,being very new to this I did not know u cudnt roll back to version 606 so now that the goggles are on that firmware my drone that has the vista lite in it does connect and work but wat did I lose? They are not on the exact same version firmware.and the vista lite skips firmware version 607 for some reason it goes from 606 -608 hmmmm so wierd
@Mangorille
Жыл бұрын
Main thing is if you want to root the goggles and use the WTFOS but you can use the instructions in the link here to go back to 607. I did the same as you and was able to use this to go back and root: github.com/fpv-wtf/butter
@burdfamfpv
Жыл бұрын
I appreciate u taking the time to respond,so ur saying I can use that to downgrade the v2 goggles back to 606 ?that's really all I'm tryn to do at this point I dnt want to mess anything up tryn to root and all that lol
@Mangorille
Жыл бұрын
@@burdfamfpv Correct. Check out this video where I did just that: kzread.info/dash/bejne/c2eB1qOsqZqdqs4.html
@burdfamfpv
Жыл бұрын
Thank you! Much appreciated 🙏
@burdfamfpv
Жыл бұрын
It was successful you my friend are a frickn genus thanks again huge help ✌️
I can't record images with the vista. What I can do?
@Mangorille
Жыл бұрын
You mean you are trying to record the DVR on the goggles and it is not working? The firmware does not currently have auto record on take off so you'll need to manually go into the menu and record each time currently.
@joseanruiz3787
Жыл бұрын
@@Mangorille Ok. on top of glasses?. Thank you.
@Mangorille
Жыл бұрын
@@joseanruiz3787 Pull down the top menu and press the record button.
@joseanruiz3787
Жыл бұрын
@@Mangorille Thanks!!!!
@Mangorille
Жыл бұрын
@@joseanruiz3787 No problem, happy flying!
It will be it’s in low power mode before arm
@Mangorille
Жыл бұрын
Are you sure? The O3 you are correct but I understood that the Vista will go to full power if you turn off the temp control. Bardwell said the same thing on one of his latest live streams.
@noisy_boi_fpv_3920
Жыл бұрын
@@Mangorille nope
@noisy_boi_fpv_3920
Жыл бұрын
@@Mangorille I am sure my vistas all go straight to 50 upon arm. Sit at low mbps in low power mode prior to arm. Temp control shuts down unit before arming if it over heats is all it’s for.
@Mangorille
Жыл бұрын
@@noisy_boi_fpv_3920 What I have noticed: O3: Will not go into full power until armed even when the low power mode is off. With the low power mode off it goes to 50mbps but does not go to full power. Vista: Will go to full power and 50mpbs when auto temp control is off.
How to bind vista with new dji goggles 2?
@Mangorille
Жыл бұрын
You need to get the latest vista firmware and latest goggles 2 firmware then press the bind button on both when in the O3 mode on the Goggles 2.
@matinik_fpv
Жыл бұрын
@@Mangorille understand, thanks! What about wtfos?
@Mangorille
Жыл бұрын
@@matinik_fpv WTFOS is not applicable to the Goggles 2. It only works with the Goggles V1 and V2.
@matinik_fpv
Жыл бұрын
@@Mangorille so there is no rrssi dbm or any osd on goggles 2?
@Mangorille
Жыл бұрын
@@matinik_fpv Goggles 2 supports MSP OSD so you can get all those OSD elements on the screen. Check this out: kzread.info/dash/bejne/fX2d1ZahcsLKpbQ.html
The old air unit goes to 50 mb as soon as you arm on new update
@Mangorille
Жыл бұрын
I have it set to non low power mode and it is still not going to 50mbps, gets very close but not exactly 50.
@biggfpv2721
Жыл бұрын
@@Mangorille doesnt matter mine does the same till i arm then goes to 50
@Mangorille
Жыл бұрын
@@biggfpv2721 Will try it out. Thanks!
Been trying to bind my Goggles 2 to my vista air unit lite but keep getting connection failed. I used dji assistant 2 consumer drone series v2.1.15. Now tried downgrading and getting error. This whole thing is a mess it’s so buggy.
@Mangorille
Жыл бұрын
Only thing I did differently than you was use the DJI Assistant 2 (DJI FPV series) to update the Vista. Worked fine. I was also able to downgrade without problem. What error you getting?
@hobbyxplorer
Жыл бұрын
@@Mangorille originally I tried with the fpv assistant but that didn’t work so I tried the newer assistant 2 consumer version. I’m only getting an error when downgrading which I’m not concerned about. I just can’t bind them. Keep getting connection failed. If no one else is seeing this issue then I assume it’s my computer but I don’t see how that’s possible. I uninstalled and reinstalled all the assistant softwares on my computer but still no luck.
@Mangorille
Жыл бұрын
@@hobbyxplorer Very strange, I haven't had issues updating in my 3 years with the DJI system except maybe once last year.
@hobbyxplorer
Жыл бұрын
@@Mangorille I was able to update I just can’t bind the goggles to the air unit. There should be an another update with bug fixes soon.
finally bit the bullet and ordered a DJI FPV COMBO as currently on offer here in the UK for £899 I thought this way I get the FPV GOGGLES V2 which I could use on a fpv drone I build with the Caddx or air unit and essentially have the FPV DRONE for only £250 as I would need the goggles for other projects anyway. I was looking at building a smaller drone with the Caddx vista or DJI AIR unit. But I am very confused with the new update for the firmware on the Caddx vista and air unit So currently I can use my goggles V2 with the Caddx vista or air unit but if I was to do the firmware updates I will be to use the controller V2 but I will no longer be able to use the DJI FPV GOGGLES V2 :( I can only assume the goggles v2 will need the update when I get them so then I will no longer be able to use the goggles with any other FPV drone via the Caddx unit or air unit Hope this makes sense and maybe you can correct me or not. If this is the case maybe I cancel the FPV COMBO order as I won’t be able to use any of it for anything else now?!
@Mangorille
Жыл бұрын
You are correct, very confusing state that we're in right now. The backwards compatibility firmware that you're referring to only supports the Goggles 2. I've moved away from the FPV Controller 2 myself as a result. kzread.info/dash/bejne/g4akqpWcaaqTiZc.html
@bozzyxx6028
Жыл бұрын
@@Mangorille so in short I can keep the fpv combo with controller 2 and fpv goggle v2 but keep older firmware on both and the only digital vtx I can use on building a drone that will support both will be the air unit also on old firmware 😂😂
@Mangorille
Жыл бұрын
@@bozzyxx6028 You're not going to be able to get that combination of parts working with a vista right now. You'd need to wait and see what DJI does with the Vista and Goggles V2 or just invest in a separate quality controller for the vista like a Crossfire or ExpressLRS.