DFNDR NIJ level IV /RF Body Armor Demo
Ғылым және технология
💲DFNDR: bit.ly/46swUyp
Links: campsite.bio/buffrange
Join this channel to get access to perks:
/ @buffrange
Model: E-IVSA04
This demonstration pertains only to the samples tested. This demonstration/review
may not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any federal government agency. Always seek official NIJ accredited labs reports for threat profiles.
* * The information presented in these videos is technical and educational in nature. All safety precautions are followed. Imitation or the use of anything demonstrated in my videos is done AT YOUR OWN RISK. This video is not an attempt to sell you a good or service. I am not a gun shop and DO NOT sell or deal in firearms. Such a practice is heavily regulated and subject to applicable laws. I DO NOT sell parts, magazines, or firearms.
**This video could contain affiliate links. If you use these links to buy something we may earn a commission. Thanks for the support!
Пікірлер: 58
The one piece is real
As always nothing but the most professional and complete testing!! Thank-you
@BuffRANGE
7 ай бұрын
Thank you!
Another nice test, thank you.
@BuffRANGE
7 ай бұрын
Our pleasure!
Appreciate your content
Seems like a good plate for the specs and price. Ever thought of doing a plate tier list?
@BuffRANGE
7 ай бұрын
The following is one I've made that might make people grumpy? Level III+ RMA 1092 G2 Stealth Armor Systems HEXAR (B4C or Alumina) Militech RF2 Hesco 3810 Adept Thunder RF (no M855A1) Tactical Scorpion Gear III+ Xtreme (foam edge) Level IV: Adept Colossus XSAPI RMA 1192 Militech RF3 Black Label Stealth Armor Systems Dragon Skin or Hexar Solid Spartan Armor Hercules Xtreme (formally Ares) Hesco 4800 ESAPI RMA 1165 (not tested yet) Hesco 4601 Highcom 4S17M RMA 1155 Botach Battle Steel Level IV (Longfri Plate) LAPG Level IV or similar (foam edges, bare min budget recommendation) SRT: Hesco M210 RMA ESRT Hesco L210 TSG ASP
@thepurespartanify
7 ай бұрын
@@BuffRANGE Damn Militech really beating out Hesco hesco boys punching air rn
@yzhou05
7 ай бұрын
@@thepurespartanify It's about cost effectiveness. Militech RF3 is $540 @ 6.5 lbs whereas Hesco 4800 is $2600 @ 5.1 lbs. If cost is not a factor then Hesco would be higher in the rankings. Then again the Collossus is also 6.5 lbs and just $640 and stops more/better than all the other plates listed...
@milspecmike8440
7 ай бұрын
@@BuffRANGESpartan Hercules worse than Botach or LAPG?
@yzhou05
7 ай бұрын
@@ChristopherGoydich-cb6bd ESRT is a newer offering.
Good work.
@BuffRANGE
7 ай бұрын
Thank you kindly :D
Looked very sinilar in composition to the Battle Steel level IV plates me and some buddies lot tested.
@BuffRANGE
5 ай бұрын
What model # did the BS have? BS does sell a few various manufacturers plates
Hey @BuffRANGE , any chance you could check out Dayton Armor and their Level 3 ICW plates? It almost looks a little too good to be true but I would love to lessen more weight load for work.
@BuffRANGE
7 ай бұрын
Dayton has been long requested on the channel. I will see if I can save up enough $$ to make it happen.
Amazing ballistic test videos! You should get more views really. I just wish if you'd test out PGD ESAPI U-Line NIJ level IV. I have a set of this plate. Thanks!
@BuffRANGE
7 ай бұрын
I work with PGD. Maybe we can make that happen this coming year.
@user-qu5uh8hh2p
7 ай бұрын
@@BuffRANGE Wow, I didn't know you work with PGD. That's great to hear!
@user-qu5uh8hh2p
7 ай бұрын
@@BuffRANGE Around which month would you be able to test the U-line level IV plates? Also, could you please try out Korean made Carbon Hexa level III+ plate? It is made mostly out of UHMWPE and bit of carbon fibers on front and back side. It is said to defeat M855 green tip 5.56mm as well as creedmore. I'm really interested to see if it can defeat Russian AK-74 5.45 AP rounds, 7N6, 7N10 and onwards since these rounds are being used by the Northern neighborhood... Annnnnd conventional NATO rounds you would normally test out too. Thank you for making those amazing videos again!
@user-qu5uh8hh2p
7 ай бұрын
@@BuffRANGE I think you should contact Carbon Hexa directly for international shipment.
@user-qu5uh8hh2p
7 ай бұрын
@@BuffRANGE I can't give you li1 nk to the product(Carbon Hexa level III+ plate) I think li1 nks are censored on KZread or smt...
Which plates have you found to give the best protection, 3+ and level 4 Thank you
@BuffRANGE
7 ай бұрын
This is my current list of preferred pics based on my testing: Level III+ RMA 1092 G2 Stealth Armor Systems HEXAR (B4C or Alumina) Militech RF2 Hesco 3810 Adept Thunder RF (no M855A1) Hesco 3810 Tactical Scorpion Gear III+ Xtreme (foam edge) Level IV: Adept Colossus US Military XSAPI RMA 1192 Militech RF3 Black Label Stealth Armor Systems Dragon Skin or Hexar Solid Spartan Armor Hercules Xtreme (formally Ares) Hesco 4800 US Military ESAPI RMA 1165 Hesco 4601 Highcom 4S17M RMA 1155 Botach Battle Steel Level IV (Longfri Plate) LAPG Level IV or similar (foam edges, bare min budget recommendation) SRT: Hesco M210 RMA ESRT Hesco L210 TSG ASP
Hey mr. Matt i am considering looking into a backpack sized armor pannel/plate Bag. 21.5" x 12" x 9 any suggestions? Keep up the work man 🆒
@BuffRANGE
7 ай бұрын
Weight limit? Threats to stop?
Do you think the solid AP 54r bullet might perform like m80a1 in terminal ballistics, or is it too differently constructed?
@BuffRANGE
7 ай бұрын
The copper one with the little internal core?
@Captain_Harbatkin
7 ай бұрын
@@BuffRANGE You called it a brass solid with AP tip. It's the one from Denver Bullets that isn't incendiary.
@BuffRANGE
7 ай бұрын
@@Captain_Harbatkin Got it. IMO the M80A1 is superior. There's not a lot of that core in the bullet, and degrades very quickly.
Any chance you’ll be testing the rma esrt soon?
@BuffRANGE
7 ай бұрын
I did some RD on it. I’ll ask them if I can get another pair for public testing
7.62×51 NATO, 145gr Brass Ap -SBR 7.6×51 Copper API -SBR NEW - Cartridges?❤👍👌👏!
@BuffRANGE
7 ай бұрын
They were from Denver Bullets. I pulled the bullets and resized them for .308 from .310
Have you loaded any ap rounds or m80a1 in 300blk? I think it would be interesting to see on 3a.
@BuffRANGE
7 ай бұрын
Yes. It’s basically still a level III or ESRT plate threat. They are almost as effective as 7.62x39mm API Bz
@neilwalker8686
7 ай бұрын
@@BuffRANGE - awesome, it has been on my mind for awhile.
🦍
1st. Awesome video.
My messed up back would like the weight on that one
sabot shots penetration testing ? 5k fps rounds?
@BuffRANGE
7 ай бұрын
Come again?
@ranro7371
7 ай бұрын
@@BuffRANGEjust ideas for a new video.
@BuffRANGE
7 ай бұрын
@@ranro7371 The hard part with sabot is getting any kind of accuracy. Even at 45'.
@ranro7371
7 ай бұрын
@@BuffRANGE accuracy isnt the goal though, penetration power is
@BuffRANGE
7 ай бұрын
@@ranro7371 True, but I still need them broadside of the barn window accurate at 45' to hit things :D
All natty Matty!
@BuffRANGE
7 ай бұрын
Built on boat loads of whitemeat chicken, rice, barley, sweet potatoes, and Broccoli.. lol
Jump to 5:30