Skid factory and bcw in the same morning, happy days.....

Nice shirt Benny 👌🏻👌🏻👌🏻

*I'm more worried about the Cresta than the Corona!* 😄👍

Love the Cresta and as always explained everything perfectly

I've enjoyed every video put up so far. There has been something that I have learnt from each one. Great to see you can still make content.

Good on ya Benny. Keep up the awesome work, stay safe and lets hope things get better soon!

Thanks for all you do Benny. Stay safe, stay well all.👍🏼🤘🏼😎

Had to click like for your attitude at the end of the video, one of the best I've seen on YT xXx

Always nice to get an update on the Cresta, it's such a lovely hooligan!

Fingers crossed that you can keep going, love your work, hope the cresta gets back to normal

two legends in a legend!

Thanks Benny stay safe hope Cresta is sorted soon

Thank YOU, Benny!

Yesssss the cresta is back ❤️

Benny's Cresta Works!🤘🏼

That thing takes off like a rocket-ship, it hooks up!

That was my question thanks guys makes sense 👌

will get back to patreon when I can love the show and your attitude to everything cheers

@BennysCustomWorks

4 жыл бұрын

damfadd thanks for your support , we totally understand.

Well done, thanks.

Love the videos Benny keep it up

Love an episode of Benny's camping world!

Well done almost 100k subs mate.

My favorite thing about this car is that it’s so drama free and just works. Unlike the slower cars around here that look ridiculous and make a ton of noise. Thanks for the content and good luck!

Stay safe down there, Benny, and, everyone show some appreciation for keeping the parts coming during all this, people really need em. (Actually waiting on something for someone's leaky Taurus as we speak. :) )

Good thing to mention supporting local businesses in the wake of everything at the moment it is the highest priority for all Australian's and even if you're from O-S looking after the local community is a must.

keep up the good work Benny

Hope all gets sorted with the cresta mate it's an awesome car 😀 Keep safe and well.

Awesome video thank you

Love your work! Keep it up :)

I got an ad where a gnome was telling me that egg is bad for my hands. Love the Cresta btw better than a Dodge Demon imo.

Awesome as usual. Don't forget to check valve springs while you're looking for that miss.

Benny you a bad ass. We are not worthy. Just subbed. Thanks for providing content,

Shot benny.. keep that lockdown content coming!

Thanks for the video, even on 5 cylinders that cresida really moves

@letsgobubblegum

4 жыл бұрын

cresta not cresida. more rare and Japan only.

Good vid as always 👌🏾

If you need ignition cables. Think about the MSD custom fit set for the 60's Chrysler HEMI. They have a real long reach on them. (MSD Ignition #31523)

Was awesome hearing your reasoning as to why you still keep your shoe in it after the rig was mis-firing. Cheers

Take it easy, Benny

That moment at 5:40 when Scotty sensed a disturbance in the force: Benny: What's up? Scotty: Nothing, I don't think. Benny: Nothing you don't think. Scotty: Nah. Benny: (urge to wee intensifies)

Thanks Benny, really enjoyed the detail. Not so hot for you and the Cresta, but I'm sure you'll track down the fault. cheers

I was waiting for a very big BANG. Take care and don't lick any doorknobs.

6:33 Benny goes for a wee, followed by a slashing sound on the transition card. So now we know why they play that sound - every time there's a transition he goes for a slash.

Keep on going people, we’re Australians and doing the right thing by all of your mates is staying home

Chur Benny! You're a madd dogg!

Can't stop laughing, "need to pee.... after the next pull" sorry, tears laughter. Think I need to pee as well 😂😂

@BennysCustomWorks

4 жыл бұрын

Bruce Pulver brb, going to pee.

@bugproductions9050

4 жыл бұрын

I've been known to have a wee after a pull. Less stains on the undies.

@theveeman

4 жыл бұрын

@@BennysCustomWorks More like shitting your self. I was.

Good episode, great to see an update on the cresta, but I was so confused seeing the thumbnail of the cresta reversed. I stared at it trying to figure out why the opposite headlight got removed

@danatkinson6698

4 жыл бұрын

I was confused too lol

My GN did this. Ended up being an internal fault in a spark plug. No cracks visible.

Stay safe guys

Benny dont fight it dont fight it dont fight hoody merchandise is where it is hoody merch is where it is !!!!!!! We need it in bourne city 👍

With spark .. M&W is your friend

@BennysCustomWorks

4 жыл бұрын

MmeDesgranges trying to avoid cdi as it’s more wiring and a box. Dale’s 6 second commodore runs IGN1A’s so I think we’ll be fine if we do go down that route

@dattdrift

4 жыл бұрын

@@BennysCustomWorks we ran the M&W in the stagea, We were having interference in the ignition, Think we worked it out to be the Ross crank trigger wasn't liking the msd.. At EFI Performance we were trying lots off things to fix it.. Ended up going the M&W cdi setup.. M&W sent us a drag box not realizing we drove it on the street.. So we sent it back and they modified so off boost it ran like the street version then jumped over to the drag mj's on boost.. Our interference problems disappeared after that.. Not saying yours has a similar problem as obviously yours is only effecting the 1 cylinder.. Hope ya sought it soon Benny..

Scotty and Benny in the Cresta makes the car look like its no bigger than a Mira.

Hi did you check injector spray pattern that it is spraying correctly (atomizing the fuel ) and not making streams when quantity and pressure is required ? did you swap your injectors one and two around to see if your misfire moves ? it can either get more fuel or less fuel on that specific cylinder charge thus over richen or under leaning the air mixture on that specific cylinder.

I would need a wee running 42psi through my 1J 😨 too 😂

@Channel_60

4 жыл бұрын

it's a barra, it loves the boost.

@bradleyfelschow1270

4 жыл бұрын

What 1j? 🤣 and they ran 40, not 42

My Cresta my beautifull white cresta!! What have you done to my crestaaaaa.

Any news on drag week this year? Are you planning to go? Is there talk of how COVID-19 will affect shipping ect (if it isnt totally cancelled).

I was really interested in Scotty explaining how he determines the actual injector flow... Then he gets cut off right before getting to the good stuff. Goddamtt

@nauthizzz

4 жыл бұрын

Might be a good submission/suggestion for a Haltech Tech Tuesday topic if they haven't touched on it already.

I cant decide if that makes him more special than MCM that Scotty comes to him rather than him going to Scotty.

@BennysCustomWorks

4 жыл бұрын

MrJaiimez we’d be at Haltech for sure if there was a hub dyno. We have used their chassis dyno many times also :)

Thanks Benny

Has the Cresta been fully engineered yet? Could you talk about what needed (or needs) to get done to make it legal?

Issue with ignition breakdown - dwell time on ignition coils are too low?

What happened with the defect that you got on this thing? Is it no longer registered? If so how are you planning to drive it in the US for drag week?

hahah "whats subaru land?" *stares*

@NarfBLAST

4 жыл бұрын

www.haltech.com/meet-the-team-scott-and-his-evo-9/

Would R8 coils be an option? In Europe they are a pretty common upgrade in high hp builds

Awww yisss

Should have the intercom in so you can just converse mid pull!

That nylock nut looks to be just touching a thread haha

How do you ground those coils on your car? I’ve seen issues on LS motors with coils that aren’t grounded correctly. I’m putting square LS coils for my big block 540 and I’m just looking for a good solution for my car

@BennysCustomWorks

4 жыл бұрын

XOZ Industries grounded to the block directly. Common ground with ECU

inspired me up up my boost from 16psi to 42psi in my wrx benny, I mean, what could go wrong right?

@SquireDAF

4 жыл бұрын

Send it through the dyno wall!

@LimitR

4 жыл бұрын

HeAdGaSkEt!

'Whats Subaru land?' Haha

Not sure if they are smart or dumb coils but could there be an issue with the ecu? Burning out a transistor in the ecu that controls the individual coil could cause this type of issue.

The factory coils were the cheapest junk the guys could find on Alibaba lol. I think they only produced 20mJ of spark energy off the top of my head. A LS3 coil outputs 110mJ for comparison. Even the I6T Sprint in development had some spark break up issues.

Are you guys logging coolant pressure? Or done a compression check? Possible valve float?

@BennysCustomWorks

4 жыл бұрын

Donn29 no we don’t log coolant pressure currently, compression is spot on , the miss only started after I touched the coils .

@Donn29

4 жыл бұрын

@@BennysCustomWorks I haven't tried logging coolant pressure yet myself, but I have the sensor, just need to get around to it. But it's all the rage right now!

Did u swap the coil to another cylinder and see if it follows? i would have also done the plug to a different cylinder again as a 2nd test.

@BennysCustomWorks

4 жыл бұрын

JyveKilla yea, stays in the same cyl.

@JyveKilla

4 жыл бұрын

@@BennysCustomWorks compression test?

ECU ignition driver output? Hopefully just wiring/connections.

@BennysCustomWorks

4 жыл бұрын

Paul Mathieson we think we’ve got it sorted bit no tracks to test at :(

*looks at 210kw RS* .... awww :P

@4:12 Sounds like 270 WHP. :)

and chopped by Martys Liberty:)

What’s the issues with the Ford wiring loom? Didn’t quite catch what you said..

@BennysCustomWorks

4 жыл бұрын

Name Disclosed damaged pins in the connectors and it’s also been in the car for ever.

@namedisclosed1849

4 жыл бұрын

Benny's Custom Works ah k, thought you might of said it was some sort of design problem. All G. 👌

Vice Principal: NOOOOO!

Nothing worse than a nervous wee! Fell victim to KZread advertising too. 2 Polar Blast bottle for $54! Thanks Sparesbox!

@BennysCustomWorks

4 жыл бұрын

Fordy Ford I did also :D

change the plugs aswell?

@BennysCustomWorks

4 жыл бұрын

Sir Ramone yeah mate :D

@SirRamone

4 жыл бұрын

@@BennysCustomWorks Wasn't sure if you mentioned it.

9 sec on 5 cylinders...not too bad

Every connector is potential for resistance. Maybe re-do the wiring; and go in HEAVY. Future proof it. Over - rate the wiring for coils, injectors, ignition loads. The ignition switch is old, too. Run power relays for all those jobs. Take the loads away from all the old stuff that's necessary.

@BennysCustomWorks

4 жыл бұрын

Mudgrove yeah all new relays already. We’ll most likely be re wiring it sooner or later

could the problem be faulty injector flow

@BennysCustomWorks

4 жыл бұрын

Jason Mills new injectors ( that came flow matched)

👍

IGN1A bro just do it ;)

Can you use a reg that is to big?

@BennysCustomWorks

4 жыл бұрын

David 32gtr the max flow capabilities are just the internal sized ports and the inlet/ outlets. So not really.

@david32gtr87

4 жыл бұрын

@@BennysCustomWorks Thanks for the reply

With a problem like this do you know it’s not a dodgy fuel injector or fuel problem because it would show up in your data logs ?

@BennysCustomWorks

4 жыл бұрын

Kiwi Boosted Garage because the piston isn’t a puddle in the sump :D if it waa a fuelling issue 1 or 2 runs would melt it big time.

@clint.garage.6092

4 жыл бұрын

Benny's Custom Works ahhhh right that’s how you could still send it at the track like you were saying, thanks.

why not use GM ls coils?

@BennysCustomWorks

4 жыл бұрын

Nuriddin Nuriyev currently trying to keep it neat with no leads. If we need to upgrade again we’ll go straight to IGN1A’s.

@nuriddinnuriyev2046

4 жыл бұрын

@@BennysCustomWorks Good choice, I think that people use the tips on those coils from 370z to reach down to the spark plug better

@nuriddinnuriyev2046

4 жыл бұрын

@@BennysCustomWorks also sweet ride man, love the channel.... keep it up 😊😊

I wouldn't call it broke just a few battle wounds

Nothing i dont think 😯 haha

Subscribed and liked. Hopefully you'll make a few quid off youtube too to keep you ticking over.

You're doing it all wrong, go to supercheap and strap a gt40 ignition coil, new leads and rotor button to it. On a completely different note, have you indexed the plugs? These engines respond to indexing as well as exposing the electrode, .35 is tight as a nunns nasty. Even the single cam loves some plug playing.

Find someone who can use an oscilloscope Benny and they will track down the root cause of the misfire very quickly

Go to motorsport Mick he fix

Dyno scene and you both are struggling to hear each other with your cans on. Look into firearm earmuffs that lessen discharge noises but a microphone passes low volume noises through like talking, through.

😬😢

F

Make your thumbnails colour, will get more views!

@DukeOfTwist

4 жыл бұрын

It's stylin' bro

Australians trying to say "data" the American way is... strange...

@Cyborgnik

4 жыл бұрын

Benny was saying data the way most Australians say it.