I can’t say enough good things about the service and professionalism from Auto Medic garage during this disaster with my fuel system! Hoping I can do more to support Andrew and his team in the future. For anyone watching/reading this…. To say the least you won’t regret reaching out to them. Great job guys! I appreciate all the effort and patience dealing with the insurance company on this repair!

@AutomedicGarage

4 ай бұрын

Thanks for choosing us Daniel, we appreciate your business.

@kaosactual1

Ай бұрын

Where did the contaminated diesel come from? And did your regular insurance pay for it?

Was sent this link! Nice job player

@AutomedicGarage

4 ай бұрын

I’d love to do a collaboration together. Got a 6.0 shorty we’re gonna be building up soon with some goodies donated from full force diesel

One of the best videos on this yet! Just ordered.

Awesome. You are a professional for sure

Your one-handed talents are impressive.

Excellent video! Truck has a second life with a new heart!

Great install video! Thank you for your business, and for sharing your expertise.

@AutomedicGarage

3 ай бұрын

Thanks for commenting, means a lot. A S&S banner sure would look good at our shop…just saying

Grate GRATE JOB. YOU ARE. A. PROFESIONAL MECANIC

@AutomedicGarage

4 ай бұрын

Thanks bud

Dam this dude is a professional

Great video very informative thank you

My insurance turned me down for this. Ended up converting to a dcr myself. Runs great!

@AutomedicGarage

4 ай бұрын

I love the dcr. I was surprised his covered the fuel system, I just didn’t specify to them we were doing the dcr but my labor and parts are significantly less than the typical job at ford.

@jtopdawg6

4 ай бұрын

@@AutomedicGarageI’m coming to ya!! Will be reaching out again probably next week!

I'll bet all that crud in the valley was squirrel leaving. I'm gonna do my turbo when it gets warmer, but in preparation and diagnosis, I found all kinds of grit and chewed up junk the squirrels left the last time they came for a visit.

I need this done on my 2013 ford F-250 6.7

So the Oem pump lasted this guy 300k miles ??? If so, why go with the aftermarket pump and just use another Oem ? Also, I believe it is recommended to replace this pump every 100k miles, correct? Thanks for this vid and all the great info you add to it..

@AutomedicGarage

3 ай бұрын

I doubt it was oem pump, truck had the sticker for replacement injectors so just going out on a limb I’d say it’s had a pump and injectors already. I would pick the dcr over the cp4 any day just cause it’s been proven already it handles contamination and water in fuel and the cp4 has proven it can’t handle either.

8:40 May as well change out the CCV filter box out, if it has never been changed or is due for replacement.

@AutomedicGarage

4 ай бұрын

Nope, it was damn near brand new.

@tfriesen3866

4 ай бұрын

@@AutomedicGarage ok.

I’m not to the end of the video yet, but I watched others. My question is can somebody give us an idea what this cost outdoor? Thanks in advance.

@AutomedicGarage

2 ай бұрын

Pump is $1975. $1000 labor.

What kinda labor do you charge for a full fuel system?

@AutomedicGarage

2 ай бұрын

$3500 labor

Does this pump and/or the disaster prevention kit void the factory warranty?

@AutomedicGarage

18 күн бұрын

Disaster prevention doesn’t but I’m pretty sure Ford doesn’t like the dcr because it takes work away from them

@josephphillips1777

18 күн бұрын

@AutomedicGarage I wasn't sure because the DCR pump is CARB approved, so I thought maybe the warranty would remain in place.

WHAT YEAR VEHICLE AND IT APPEARS TO BE A FORD? THIS CAN BE COMPLETED WITHOUT TAKING CAB OFF?? WHAT WAS COST FOR THIS JOB.? WHERE ARE YOU LOCATED? THANK YOU FOR THIS VIDEO. I AM LOOKING TO PURCHASE A 2015 PLATINUM DUALLY F350 WITH 167 K ON IT.

@AutomedicGarage

4 күн бұрын

@@rafdecc yes, I believe the truck in the video was a 2012. No need to remove cab. I install the pump for $1200. We are in Arlington, Tn. Contact info on website Automedicgarage.com

@rafdecc

4 күн бұрын

@@AutomedicGarage how many hours did it take to do the job

Are you anywhere by michigan?

@AutomedicGarage

4 ай бұрын

No, we’re down south in Tennessee

Where are you located?

Where are u located at in tenn.

@AutomedicGarage

2 ай бұрын

Arlington

Where you garage? Pensilvania?

@AutomedicGarage

4 ай бұрын

Tennessee

@jtopdawg6

4 ай бұрын

What part of Tennessee? I need one installed on a truck….

@jtopdawg6

4 ай бұрын

Great video, just subscribed.

@AutomedicGarage

4 ай бұрын

@@jtopdawg6 Arlington

@jtopdawg6

4 ай бұрын

@@AutomedicGarageoh wow I’m in olive branch. Do you install these or you know of a reputable shop that install these. I just had my cp4 grenade on mine. Third cp4 to fail on me in two trucks.

If ford knows this pump is problematic why do they continue to use on new vehicles? They should pickup the tab for all the vehicles that need to make the upgrade.

@AutomedicGarage

3 ай бұрын

The 6.7 has a cramped valley and the motor was designed around this pump. Until the dcr came out there was no other viable option.

@RDTengineered

3 ай бұрын

They want the rest of the Bosch fuel system and to get it you have to take the pump.

@AutomedicGarage

3 ай бұрын

@@RDTengineered no, you can buy a contamination kit with the dcr now if you know the right place.

@RDTengineered

3 ай бұрын

@@AutomedicGarage I'm talking about the OEM aka Ford. They want to buy the whole system plug and play for their assembly line. Not a pump from a, rails from b, lines from c, sensors from d, etc. Then have to have a whole internal engineering team at Ford work to get all the parts to play together. Ford wants to have minimum engineering support requirement for the fuel system and buy it all in on spot to cut down on headache. Ford is getting a package price for the system. The price of that Bosch would give, if they would, for the system minus the pump most likely does not make sense commercially.

@AutomedicGarage

3 ай бұрын

@@RDTengineered my supplier sells the whole contamination kit with the S&S pump. Says money over the contamination kit plus a dcr