How did I not see this video when looking at your channel. Man you set a super high standard nearly a decade ago. I can say you are still the best composite fabricating tutorial producer on youtube. Seriously Easy Composites Ltd, thank you for sharing so much inspiration to the World. : )

Absolutely love these well made, in depth and detailed yet comprehensive professional tutorials! 💯👏🏼👏🏼 I can safely say that for me personally, These easy composites tutorials have had a great part in encouraging me to try to build my own CF constructions.

Thank you folks. We start filming the split mould tonight, they seem to take us about 2 weeks to film; I normally manage to to the editting alongside but allowing for some time at the end to get it all 'just-so' we still hope to have the next part done within around 3 weeks and then the same for part 3!

I have been creating patterns by hand for a few years and can say that this is a very accurate concise tutorial. Thank you!

This is just a great series of tutorials. Really concise and to the point. Thanks guys!

@easycompositestv

4 жыл бұрын

Thanks Guy, glad you've enjoyed them.

i do carbonfiber fabrication and laminating and i find these tutorials fascinating!

Part 2 is currently in production and as soon as the video has been completed will be released.

@drew79s

10 жыл бұрын

I thought you guys said this was easy? ;)

@pitaorj

10 жыл бұрын

Plz, we´ve been waiting for some time. this tutorrials are awesome! Are you going to use a bladder in the mold?

@salimcadcam

10 жыл бұрын

Please, when you will release the Part 2 ?

@tkhayes83

10 жыл бұрын

cant wait these videos are fantastic

@kimrasmussen8594

10 жыл бұрын

Cant wait to see the final part

Sweden-here One of the very few who's shows it from ste start. Thank you very much!

I make blue polystyrene foam sanding blocks with a range of common profiles, then stick on Velcro 50mm wide, and then use Velcro-backed abranet sanding sheet cut to size to get the shapes I need. Works very well in getting the shapes I need.

YOUR VIDEOS MAKE IT LOOK SO SIMPLE THEY ARE GREAT I GUESS MOST PEOPLE THAT SEE YOUR VIDEO HAVE SOME IDEA OF THE TRUE WORK AND TIME THAT IS PUT INTO THE PATTERN MAKING WHICH IS THE KEY TO WHAT THE END PRODUCT WILL BE THIS IS ALSO WHY PATTERN MAKING IS AN INDENTURED TRADE APPRENTICESHIP I DO ENJOY WATCHING SOMEONE ELSE DO ALL THE WORK AND AGAIN THIS VIDEO IS GREAT THANKYOU

Very comprehensive and instructional, it’s good to see actual expertise and knowledge even right down to expanded polystyrene being identified as such and not called polystyrene by so many lazy and dumbed down practitioners in this field. Easy Composites Ltd gives the strongest indication that can be trusted to deliver excellence.

This is an extremely informative video. Thank you for being so thorough in each step.

Thanks for taking the time to make these videos.. they really inspire me, and others, to take on carbon projects.

Wow, this is the vid I have been looking for a long time! Great job and easy to follow. Can´t wait for the second part!

Part 2 of our video series has now been completed and details How to Make Complex Split/Multi-Part Mould for Composites. You can find the video here: Fibreglass/FRP Split-Mould Making Guide (Carbon Fibre Airbox Pt.2)

You are the man, fantastic tutorial with superb result, very inspiring, thanks!

This tutorial series was very clear and concise. Thanks alot!!!!

Thank you for sharing this with us!

Excellent presentation! The example of the pattern being produced here is quite a bit more complex than the parts that I wish to produce, but that's actually so much for the better. This presentation was so well planned and produced, that it makes the subject matter very easy to see, to understand, and to follow. I quite enjoyed this, as I'm certain I will, the remainder of the series.

This really has opened me a new door. Thanks a lot

For someone new to composite moulding techniques, excellent video.

Can't wait for the next part in the series. Great job as always!

Great vid! I've been binge watching since last night, lol. I hope you make more of this

Excellent video. You guys are talented. I can not wait for the next in this series. Totally respected!

Great Series-Thank you for such thorough instruction!!

Awesome series. This is a skill that should be thaugh on every school from childhood. Activating the creative and "thinking for yourself" part of the brain witch 99% of people go through their whole live almost never dare to use.

@MisterFuturtastic

10 жыл бұрын

Well said!

You guys are the best! Hope one day you can expand to the states!

Hi .… very nice job … I do believe that such techniques were the joy of those before CNC days ….well done

Yes! Definitely! The Pattern-Coat Primer and HI-Gloss can be sprayed and with practice you can achieve a high standard of finish straight out of the gun leaving less sanding than would be needed if brush applied.

How could anybody thumbs down this video

That's hell lots of work. Thank you for the detailed video

This is incredible. I'll definitely try this in the future. 3D printing might also be a good way to make a frame.

Those brush grooves are killing me.

A terrific method there. Thanks for showing what is possible.

@easycompositestv

4 жыл бұрын

No problem Mark, glad you enjoyed it.

Hi Kapullas, Yes, it's certainly something we'd like to make a video on, as well as various other composites processes you can do with 3D printouts. It's an exciting time for designers and composites artisans!

Your video are very clear and informative.

This guys an artist.

AWESOME tutorials !!!

OUTSTANDING video

what is special about your videos is that you cover mistakes the beginner will invariably make, and how to fix them

@easycompositestv

4 жыл бұрын

Thanks Ryan, we try to, yes. :)

these videos are amazing thanks alot

17:19 the whisper that guides you :)

Impressive tutorial work guys!

Excellent work, I am now waiting for the second part

Excellant presentation. Lots of good practical tips and tricks.

No, as you've realised now that's just the pattern; we start filming today on making a split mould using this airbox pattern and then only after that can we make our first airbox. Quality takes time!

Amazing work!

u guys are awesome thank you.

Thanks very much, we appreciate all the feedback. The next video in the series is underway now so it should not be too long before the next installment!

you guys are the best in the market! and not afraid to explain how to ! just wanted to know why you didnt use fiber glass before the body filler?

Easy Composites Ltd thank god for you guys

Very nice. Cant wait for that to be relevant to me.

Superb!!!

This tutorial is brilliant - for people who do not have skils happy to ofer my services. Can cut shape on CNC machine from foam , wood , MDF, plywood, aluminium and many other. Much larger size can be cut than 3D printed. Shape can be 3D scanned from existing object or created in 3D software . Accept files in plenty diferent formats from meshes as STL or PLY to CAD formats and many others. Also can help with design - by turning your sketches and sugestions- in to the 3D model. Another great possibility is to fit your model on curved surface- we can do it simple by 3D scanning this surface . When have it in computer is easy to extract it from your model and create part with perfect fit. All of this for affordable price so by having your model just order composites and start to do it -only barrier will be your imagination.

It depends on the facilities available. For some materials, you can get away with a thin skim of filler and 2 pack paints to get the desired finish. For many other items like foams etc, the Pattern-Coat Primer and Gloss Coat can be very beneficial, especially if spray facilities are not available and/or fine details are necessary to be shaped and finished.

WoooOOW!!! Crazy!! Tks

very nice video! thank you

Unbelievable!

This is probably one of the best and more accurate tutorials about mold making. Is there any tutorial you can address me to learn how to create sections views and print them with solidworks as made in the video? I would really appreciate. I'm confined in my home and it's the best moment to learn those skills. Thanks.

@easycompositestv

4 жыл бұрын

We don't have any solidworks videos, however there is an entire forum for solidworks users and the software itself has a very good set of inbuilt tutorial lessons.

i thought what you showed was the finished product. good stuff man.

Excellent presentation. Related to this what would be the best approach to make a part like a flying saucer (like two dishes on top of each other) covered in fiberglass or carbon, with a foam core? Don't ask about its utility - there's none - but I'm interested in the approach of making a mold for it for either hand lamination, vacuum bagging, resin infusion. Could be a subject for a new video. Thanks in advance!

Thank you for this idea i can now do it in more automotove materials fpr we dont have that here in the philippines.

A good idea to build a model glider fuselage. Great! Thank you sir

@easycompositestv

3 жыл бұрын

You're welcome Aziz; hope the project goes well.

@aziznormuminov745

3 жыл бұрын

@@easycompositestv 👍

Can those bare foam be used as a male mold? Excellent video by the way.

Well, it might be similar but it can't be *this* airbox because we just made it from scratch :) - The whole pint of making a pattern is that it's your own design and so of course our design is different from any other airbox. You can use the same process to make any of your own designs from just a design.

This is an excellent tutorial. I wish a had a high tech machine to CNC my own complex patterns. It's really hard to do those by hand.

@easycompositestv

8 жыл бұрын

+michor10 Yes, there's time and effort goes into hand making a pattern. These days though, the price of CNC routers is coming down and machines like the Stepcraft are within reach if you feel like making an investment. Software like Autodesk's amazing Fusion360 is FREE (for non commercial use) and will output the GCODE to a router like a Stepcraft. You can then machine PU model board for instant patterns.

@michor10

8 жыл бұрын

Easy Composites Ltd Wow, that is great news. I will try out printing out those reference images like you did in the video until I can afford a CNC router. That will really help getting the symmetry right. Thanks for the tip!

@aldoyosbel1728397263

8 жыл бұрын

+Easy Composites Ltd thanks for the info about cnc. keep make more videos, i still taking class from you. im working on my car, is a 350z and i cut the roof and im going to make it convertible with hard top, basically i has to make my own hard top roof. big challenger

@jamesbarroga339

6 жыл бұрын

MickHornbak d

@jamesbarroga339

6 жыл бұрын

MickHornbak sircan i request tutorial doin editi ng in 3d cad?

good video

Beautiful 👌👌

I frequently design and 3d print parts. I was thinking of printing my parts, and then vacuforming them. Can molds be made from vacuformed parts?

Hey I'm just wondering if you could maybe do a tourtorial on how to make a carbon fiber mau5head and could you also include how to make the mold for it?

Awsome 👍

I understand that this is in the case where pattern/mold making is made by hand, but what would you use in the case of a cnc machine?

Great, i've been looking for something like this for almost half of the year! can't wait for the next part. I study mechanical engineering in Poland (last year) and have thesis "design of intake system in spark ignition internal combustion engine". Your video will help me a lot to do this, but i have a question. Can you tell me how to make these sections in 3d model and how i can print it? Do I need any other program besides 3d cad modeler? can't start making it without your answer. Thanks a lot for your very helpful channel :)

@easycompositestv

10 жыл бұрын

We just took section views and printed them out. Most decent CAD software will allow you to do that.

@dawid3764755

10 жыл бұрын

easycompositestv Thanks for answer. I'm newbie in engineering, only one project done in cad.

1 important question: whilst designing the 3d model of the pattern do you consider the tolerance from the thickness of the number of coating and primer going on to the mould?

@easycompositestv

4 жыл бұрын

If your were going to machine the pattern and you needed a very high level of dimensional accuracy then yes you would want to take it into account. However for most non-precise projects like this, by the time you've sanded the foam and recoated it with primer, it tends to be pretty close to the original dimensions.

Awesome video thanks !! Is it possible to make fiberglass parts directly from the pattern instead of having to do a mold out of the pattern first ?

@easycompositestv

Жыл бұрын

You can do a method of mouldless construction as in this video: kzread.info/dash/bejne/Yo2VycmjYZm5YJs.html

Hello and thanks for the videos, I have a question I'm thinking of making a mold for laminating carbon fiber infused vacuum , my mold will be modeled in a 3D software then with sliceform wood and foam as in the video, the question is whether I can make rolling the same mold , or would have to make a new mold fiberglass out of first. I think the first is enough fuerte.Gracias

@easycompositestv

9 жыл бұрын

Ernesto garcia prieto Hi Ernesto, whilst it is possible to make the mould in the first instant, usually it is far better to make a pattern (the 'male' shape) and then make a fibreglass mould (the 'female' shape) from the pattern. One reason being the ease of getting a good finish - it's much harder to get a good finish on the concave inside of a mould than on the outside of a convex pattern. Another being the strength and durability of the finished mould - foam, wood slices and coating resin are not anywhere near as strong as a solid laminate fibreglass mould. There's other reasons too. I would say if you only want to make one part then you can consider making the mould without making a pattern first; if you're planning on making more than one part then I would say it would always be better to make a pattern first.

Nice. Are you planning to do some videos of patterns using 3D printers ?

It's mentioned previously, but I would love to see a video on using 3D printing for the pattern.

@easycompositestv

10 жыл бұрын

It is something we may look at in the future as the technology grows and demand for its use increases.

Wow, always knew there would be a lot of work involved but this was a sort of wake up, lol. Very nicely done video, clear, concise and devoid of stupid music! :)

@easycompositestv

6 жыл бұрын

You're very welcome. Yes, we dropped background music many years ago and stuck with as much information as we can cram in :)

Come on part two already???

Awesome as always. When is the 2nd part coming? Cant wait!!!

@easycompositestv

10 жыл бұрын

We estimate roughly Christmas time for part 2 to be released.

@jimmyj86

10 жыл бұрын

easycompositestv What? You said three weeks after part one? Christmas time should be the date for part 3 =( "Thank you folks. We start filming the split mould tonight, they seem to take us about 2 weeks to film; I normally manage to to the editting alongside but allowing for some time at the end to get it all 'just-so' we still hope to have the next part done within around 3 weeks and then the same for part 3"

I dont have a hi gloss paint/primer like this. Is there anything else I can use in place of it to make a mold from? I have laminating epoxy and tooling gel coat. I have a hard sealed surface already so I was thinking I could use laminating epoxy because it sands easy and can give a great shine. Any suggestion are appreciated!

@easycompositestv

7 жыл бұрын

Laminating epoxy can be harder to sand than a typical pattern coating system, but with a bit of elbow grease you can still achieve a good enough gloss to take a mould from.

Hey excellent tutorials, do you ship to Mexico? Or have a authorised distribution center in America?

@easycompositestv

3 жыл бұрын

We can ship non-hazardous materials to Mexico by normal couriers.

Great tutorial, quick question, the pattern coat can it be thinned and used with a spray gun?

@easycompositestv

9 жыл бұрын

Our Pattern Coat Primer can be applied using a Gelcoat Cup gun with the resin thinned by adding 25% Acetone. The Pattern Coat Hi-Gloss will spray through a normal spray gun when it is also thinned down with 25% Acetone.

@christianc1562004

8 жыл бұрын

+Easy Composites Ltd when using the g-100 gelcoat spray gun do you still have to thin with 25% acetone? I find it very difficult to spray an even coat as too much primer comes out of the gun in a short amount of time.

@christianc1562004

8 жыл бұрын

+Easy Composites Ltd I found out that if you are using the gelcoat spray gun sold by easy composites to apply the primer is better not to use 25% acetone. By thinning the primer with 25% acetone the gelcoat just runs out of the gun and it's used more quickly then if you don't use acetone at all. Just my experience with it. Thanks.

Wow🤗🤗

Hi great video can anyone explain what is low spot and high spot. Thanks a lot!

@easycompositestv

8 жыл бұрын

Sure thing, I 'high spot' is an area of a surface which is higher than the majority of the surrounding area, a low spot is the opposite where a part of the surface is lower than the surrounding areas. The process of 'flatting' is all about getting rid of high or low spots to leave your whole surface 'flat' and smooth.

this flatness is sick. I wonder how precise is this airbox, are you measuring this on CMM? I guess, it will be very precise, if not it will be very geometric precise. Nice

@easycompositestv

4 жыл бұрын

Thanks :) It's certainly more than adequately accurate for this type of application.

If you were making this pattern on a CNC machine with tooling block, how much sanding would you need to do to get a surface finish for mould making?... Or would it come off the machine "ready to go"?

@easycompositestv

9 жыл бұрын

micky jegero It depends on the quality of the tooling block and the CNC machine. Certainly with a good high density block you can achieve a suitable finish straight from machining and with the correct kind of mould sealer and release agent take a mould off the tooling block.

How are you getting your profile sections for print out? Is this a specific function of your 3DCAD program? Or is it function of all CAD programs and I'm just overlooking it in the ones I use?

@dubledeuce875

9 жыл бұрын

iRoc Von JamminStien This somewhat dificult process of printing is a bit overlooked by the folks at Easy Composites as they cannot possibly cover the details of all of the various 3D CAD programs. I had to design the part and EXPORT it to a PDF file for printing in order to get the PRECISE profile on paper. If your profile (the outline of the object to be printed) is greater then the standard printer size of 8.5 x 11 inches, you will have to take the file to a printing house (Kinkos FedEx) for a large format print. You CAN print all of the oversize profile from an 8.5 x 11 in printer but it will come out as multiple documents and you will have to trim, align, and glue the various sheets together to get a working model. Kinkos is faster but make CERTAIN that you deliver the file to them as a PDF otherwise it will not print right. Also, depending on the CAD program you are using, the slot and tab function that is shown in the film will have to be solved. I had to call the CAD vendor (KeyCreator by KubotekUSA) for specific instructions. I made my pattern (a 24" X 10" megaphone shaped clean air intake pipe) cut from pattern outlines on MDF on a band saw and the slots were cut with a 10" table saw with a slot blade. The pieces fit together like a glove and I finished the model shape with the low density foam, body filler, and body glaze.

Could you elaborate more on how you created the section views in the cad software? Is it a software feature, or did you create them yourself?

@easycompositestv

8 жыл бұрын

+Vladymyr Martsinkovskyi : It was done manually in the CAD program. I'm not aware of an easy to use profiling feature in our CAD software but there may well be some good tricks or even plugins out there.

Where can I get the filler used? And what did you mix with it? Where can I find that as well. Trying to buy everything from you guys

@easycompositestv

4 жыл бұрын

Hi Camden, the bodyfiller is one of the only things in this video that you can't get from us, simply because it's so easy to find elsewhere we decided not to bother carrying it. We're just using a basis 'easy sand' car bodyfiller. U-POL make a good one, you can pick it up from any motor-factors, hardware store or the usual online places.

Pattern Coat Primer, Sanding Primer and Gel Coat all seem to be used for very similar purpose. What are the differences? So far I have chosen to use only Epoxy resins for all my Fiberglass and Carbon Fiber projects.

@easycompositestv

Жыл бұрын

Pattern coat primer is specifically for patterns, is very high build and easy to sand and polish. Gelcoats are completely different generally being very hard to provide a durable high quality tool finsh.

Would these techniques and materials work to make a hood scoop and bond it to to a metal hood to make a mold of the hood with a hood scoop to be used to make a carbon fiber hood.

@easycompositestv

4 жыл бұрын

Yes you could do that no problem. Bond the piece into place on the hood then take care to finish off the transition between the foam pattern and the metal so the finish is smooth then take a mould off it to make the finished hood from.

can you sculpt the polyurethane foam from a solid block, instead of using the segments to make the skeleton etc. Obviously doing it from the segments you can duplicate the exact shape of the cad drawing, but you could still get a good result just carving from the solid block?

@easycompositestv

7 жыл бұрын

Yes you certainly can use a solid block. The precision of shape may not be as good as you mention but for certain applications that may not be a limiting factor.

Hey guys when are you going to post part 2? How to make a mold from the parts you created?

Hi can you make a video on making of telescopic carbon fiber pole

@easycompositestv

3 жыл бұрын

Thanks for the suggestion but making telescopic tubes is really more of a practical matter once you have the tubes (with the correct descending diameters), it’s then about making some sort of locking mechanisms. On the market, these tend to be injection moulded parts so not really something we can demonstrate to a composites audience.

I understand the concept of building the skeleton out of the harder foam, but it seems that this greatly increases time required, rather than simply taking your time with the softer foam from one or two pieces. My mentor always used a single piece and machined it down (by machine or hand) to make a prototype for molding. What am I missing in the logic of your process? Thank you in advance.

@easycompositestv

4 жыл бұрын

The frame is to ensure a reasonable level of dimensional accuracy as the foam frame templates were taken from CAD. You would stuggle to get the same level of accuracy just free hand sanding a block of foam with nothing to guide you dimensionally.

@danielmiller2886

4 жыл бұрын

Easy Composites Ltd thank you for responding. It has been some time since I worked with composites so i appreciate your videos and insight.

Instead of starting with the shaping foam could use a 3D printer to make the base structure?

@easycompositestv

8 жыл бұрын

+Austin Fisher Mmm, yes, but you need to have a decent finish on the printed part; normally PP or PLA are not going to make a suitable release surface so you would need to coat the printed parts with something first (like infiltrant).

I used a Kingspan equivalent as a pattern making material. It's relatively cheap or free if you can get offcuts no-one wants. All you need do is peel away the aluminium based backing material and cut/glue the pieces to the desired size.

@easycompositestv

9 жыл бұрын

David Waller Hi David; one thing users should keep in mind though is that 'Kingspan' is a polystyrene foam which means it will melt in contact with solvents or styrene (such as polyester resin or bodyfiller). Since the pattern coating resin we use is polyester and so is the bodyfiller, if you do use Kingspan as your pattern material then both the resin and the bodyfiller will melt it away. This is the main reason we use polyurethane foams for pattern making.

we add the filler and then we flat back high spots.after that i see you add the pattern coat primer.whats the use of it?i mean there is a possibility to skip these steps and just move to second video(Pt.2)?