Great tutorial. Simple and to the point. You just saved many car owners a lot of money! THANK YOU!

@AliMECH

2 жыл бұрын

Thanks, glad it was helpful

@FranciscoRamos-ur1ih

2 жыл бұрын

Duracell optimum

@stevengonzalez4512

2 жыл бұрын

@@FranciscoRamos-ur1ih bruh those are batteries

@JoelinthJoelinthBalia

2 жыл бұрын

@@AliMECH 0

@turkerberber5038

Жыл бұрын

Kralsin Ali

This was the first KZread video I've ever watched from Iraq. Thumbs up.

@user-iw8bl2gb9u

20 күн бұрын

Me too 😀 I'm from Iraq too 😂😂😂

@AliMECH

20 күн бұрын

I'm from iraq too, but in spain now

@user-iw8bl2gb9u

20 күн бұрын

@@AliMECH thank you, I respect you too!

You are brilliant! I performed your procedure on my 2017 Chevrolet Colorado Duramax 4-cylinder diesel engine to fix my Nox sensor deciphered to not be functioning. The dealership wanted to charge me $750 to replace it, but using your exact technique cost me only $11.00 for the spray! Thank you, so much! You saved me a lot of money! My "Check Engine" light is now off after three months. I disconnected the batter after spraying the carb/choke cleaner spray into my master break cylinder's vacuum hose to reset my ECU and when I reconnected the battery and restarted my engine, the "Check Engine" light did not come back on! Bravo, my friend! It worked!

@AliMECH

8 ай бұрын

That's great news, glad it helped you and saved you some cash ✌️

@krakenhits1587

4 ай бұрын

​​@@AliMECHI'm pulling a p420 code low cat efficiency do you think this will work to get my engine light to go away? I have a 2012 Honda Civic LX and I wanted to clean the oxygen sensor but I'm afraid to take it out and break it I don't know if it'll clear the code because it's the sensor or it'll clean the cat enough to erase the code. I used cataclean last time and it turned the engine light off this time it didn't work

My Friend, your videos are so self explanatory and educational, so thank you. Should the intake manifold be cleaned before cleaning the O2 sensor, or is it sufficient to spray the intake manifold vacuum line like you did in this video?

My 2015 Camry SE had 16 mpg , after doing this I get 21-27 miles per gallon , like new thanks alot !!!!!

@victorgalarza9296

Жыл бұрын

Do you clean both sensor? Or only one? Thanks

Hi Ali. Cleaning o2 sensor was a success. I followed each and every of your steps and it was so easy. Before cleaning, I was getting 14-17 mpg and the computer showed 300 miles to empty. After cleaning, I filled full tank of gas and now the computer showed 448 mile to empty. I'm getting 27 mpg average. However, there is minor problem. I was receiving check engine light and the display instrument showed "Check Vehicle Stability Control System". I ended up disconnecting the battery positive terminal for a couple of minutes and the check engine light went away. I hope it stayed away and won't come back on. Thank you so much for your instruction. You saved me a ton of money when I can do it by myself. Have an awesome day my friend :)

@JCWorkouts

2 жыл бұрын

1 month later is this still the case @Kevin

@kabankachan

Жыл бұрын

hello. im planning to do this to my camry as well. did you remove the o2 sensor or spray it through the vacuum hose?

@kevinh573

Жыл бұрын

@@kabankachan Remove it

@thedbcooperforum

Жыл бұрын

I don't believe that...cleaning 02's basically only cleans the outside and is going to be for a short period. sounds like another internet myth, especially believing an additional 10 MPG.

@reallifeengineer7214

Жыл бұрын

@@thedbcooperforum I'm sure Kiana cleaned the O2 sensor. I'm sure in Kiana's before/after got more mpg after cleaning. But like you, I question how the fuel economy was "tested". To have a difference of 10mpg, I highly doubt it was the same sections of road or driven the same way.

This might clean your oxygen censor but it will harm your catalytic convertor. I destroyed my catalytic converter when I sprayed a can carburetor cleaner down the carburetor . I was trying to clean my carb in place with out taking it off. A lesson learned the hard way. DTB

@wildboar7473

2 ай бұрын

Perhaps, may have a more modern sensitive motor, getting worst....

@ejo4454

21 күн бұрын

Who said spray it down the carb?

Great video. A little bit of anti-seize on the threads is also a good idea with O2 sensors.

I love your tricks Ali.... Thanks for another great video

@AliMECH

3 жыл бұрын

Thanks Arach 🙏🏻

Chris Fix, Ratchets & Wrenches, Scotty Kilmer and now subscribed here! Amazing hack videos, Ali.. keep em coming brah..

@AliMECH

3 жыл бұрын

Thanks brother, appreciate that

Good, clear complete and concise instructions. You should definitely do a lot of these videos. Thank you very much.

@AliMECH

2 жыл бұрын

Thanks, will do!

I have a 2006 Camry with 2AZFE engine. This video was so simple I will definitely do it! It seems to run fine but it seems like a good idea to clean the injectors and valves and sensor due to age, and also I know it gets short-tripped a lot.

@AliMECH

2 жыл бұрын

Thanks for watching 🙏🏻🙏🏻

@ThexXxXxOLOxXxXx

2 жыл бұрын

You should clean it your engine will run much smoother with less shaking

AliMech great video !! Ill be doing this over the weekend.

@AliMECH

2 жыл бұрын

Awesome,

I am a woman. I do the repairs on my own vehicle (bmw). I watched several of your videos. VERY informative. thank you.

@AliMECH

3 жыл бұрын

You are welcome, thanks for your feedback

@juancontre5858

3 жыл бұрын

We're u from how mechanically inclined are you

Brilliant video simply and accurate information THANK YOU

@AliMECH

2 жыл бұрын

Thanks for watching

Excellent presentation and valuable information. Thank you.

@AliMECH

2 жыл бұрын

Thanks for watching

1. you should not use a regular wrench. use an Ox Sensor removal tool OR a flare nut wrench OR a box wrench slipped down over the disconnected wire. once you rounded off the nut part of the Ox Sensor you are in BIG trouble. 2. you have to make sure the carb cleaner says on the can "SENSOR SAFE" or says Throttle Body cleaner. Plain carb cleaner can kill your Ox Sensors

this is something I can do it myself, basic, simple to do. Thank you

@AliMECH

3 жыл бұрын

You welcome 🙏🏻

@aliabouyeh8017

2 жыл бұрын

Dont waste time and carb cleaner ,go after real problem,scan it frist.

A great video!! I’ve learned something! You presented the information clearly and didn’t waste time. Thank You.

@AliMECH

3 жыл бұрын

Yea always straight to the point, thanks

Good morning and greetings from Europe ..I have a 2006 Honda Accord with 426tkm on it..I did it yesterday and nothing happened ..today I erased the error code and the check engine light didn't come on anymore ☺️☺️☺️thank you man 💪💪💪💪 Now I will try the injectors also 🙌🙌🙌

Thank you for video.witnessing with out BEFORE there is no AFTER .great job!

@AliMECH

2 жыл бұрын

Thanks for watching

@mikesahle1193

2 жыл бұрын

🙏❤️👍U R Welcome

@AliMECH

2 жыл бұрын

🙏🏻🙏🏻

Great explanation, Thank you!

@AliMECH

2 жыл бұрын

Thanks for watching

Quality video! Excellent camera views !

@AliMECH

2 жыл бұрын

Thanks for watching

@koldenkoodies2897

2 жыл бұрын

Wrong wrench used. There is a special one designed for that job.

Found something. Did i missed something here? Wow! great. Zillions thanks guy. Brilliant knowledgement. 😍😍

@AliMECH

2 жыл бұрын

Thanks Muhammad, glad it was helpful

Great ans simple idea for getting rid of carbon. Thank you Ali.

Done cleaning with your easy method bro! New sub here from PH..

@AliMECH

2 жыл бұрын

Thanks for your support, 🙏🏻🙏🏻

The old carb cleaner spray, we used to spray that stuff into carburetor air intake every month in the 1950s thru 1970s. Modern fuel injection engines will have to do the way in this video. 😎

Good tips, I clean both O2 and MAF sensor will definitely give you a better fuel ratio and mileage.

@AliMECH

Жыл бұрын

Great point!

Doing some work on my car, will try to add this to the agenda. Thank you. Different car, but maybe I can figure out which one to spray into. Have to find someone to hold gas pedal down while spraying, I guess

Very useful and practical. Thanks, bro...

@AliMECH

3 жыл бұрын

You are welcome, thanks

@JesusGonzalez-oq3ot

2 жыл бұрын

@@AliMECH grasias amigo

really good quality videos and information, can this method work on VW & Audi FSI engines to clean the carbon on the intake valves? I have seen people take out the intake manifold and rotate the cranckshaft to close the intake valves and clean the ports manually one by one, they say it is hard and use a lot of cleaners and zip ties in a an electric drill to remove the carbon from the intake valves.

@AliMECH

3 жыл бұрын

Thanks, I have a video, I cleaned it without taking it out kzread.info/dash/bejne/np6Fztege7CfgJM.html this will be helpful for you

@StaxxxCmd

2 жыл бұрын

Run seafoam through the main vac line

@danc2014

Жыл бұрын

Direct injection cars do not have any cleaning of the intake. Thus a coating will build up unless some gas is sprayed on occasion. Toyota does this VW Audi and BMW do not. One spray will not clean it it needs continuous multiple spraying or as you said and thorough cleaning with brushes or walnut shell blast..

Good video I was wondering if I could just spray the carb cleaner in to the intake manifold as I don't know how to find a vacuum line on my Volvo V70

Is this vacuum line before or after engine? how to find that hose on other model vehicles?

I love your channel scribe upload more videos thank u for this information 💖

@AliMECH

3 жыл бұрын

Thanks, appreciate your feedback

I just bought a 04 Crown Vic w/300k miles. Thank you I will be doing this

Nicely done by a real professional.. Thank You..

@AliMECH

7 ай бұрын

Thanks for watching!

Great work! Put a little anti-seize on the threads since you have it out.

Thanks for your guide. If I use Carb cleaner to clean injectors directly as one of your videos, is air fuel ratio sensor clean too or not?

@AliMECH

3 жыл бұрын

It will but not that much, if it's too dirty

@quinnydanny2060

2 жыл бұрын

Afr is the same as o2

Enjoyed this video. Where did you find the log red spray tube?

Nice and very clear demonstrations...

@AliMECH

2 жыл бұрын

Thanks for watching

Good video. Also, you may want to do a check with your OBD computer to check a before and after cleaning the oxygen sensor.

Very good instructional video. Several thousand miles ago my 2003 Camry (currently has 152,000 on it) was displaying a chk. eng. light. Took it to auto zone & the diagnostic scanner indicated a faulty 0xy sensor. Best I remember they had a special tool they loaned me for changing it out. Does there have to be a problem somewhere else in the engine like a bad injector etc. to cause a sensor to mal-function?

@AliMECH

3 жыл бұрын

Thanks, whenever the o2 sensor gets dirty, there must be some problems, could be clogged fuel injectors, bad spark plugs or ignition coils

@sueapollonio3000

Жыл бұрын

@@AliMECH catalytic converter?

Thank you. You are a lifesaver.😃

Thank you, so simple tutorial. Loved it !!!

@AliMECH

6 ай бұрын

Glad it was helpful!

Yes this video learned me a thing or 3. NICE!

@AliMECH

2 жыл бұрын

Glad it was helpful

Thank you!!!

@AliMECH

3 жыл бұрын

You're welcome!

Thanks again man awesome video I Will hit the bell icon

@AliMECH

3 жыл бұрын

Thanks for your support

Neat trick. This shade-tree mechanic has just learned something useful. :-)

@AliMECH

2 жыл бұрын

Good to hear!

That's the air/fuel sensor good to clean it though, good video

Use copper anti seize on threads

@ibberman

2 жыл бұрын

Why not aluminum ?

@jregamey

2 жыл бұрын

It all would burn off no?

@ibberman

2 жыл бұрын

@@jregamey OK, I'll get copper then.

Professional mechanic here and occasionally I like to watch u tube videos just to see how many do it yourself people try to do stuff and get it completely wrong. In this video wasn't the case he pretty much nailed it but I like to remove the sensors and dip them in berrymans fuel injection cleaner for 30 minutes in a sonic cleaner . why ? because I have one and I use it to clean anything and everything and by dipping it in glass jars of berrymans I can re use the cleaner over and over again . 1 long clean in dirty cleaner to break down the hard stuff then 1 short clean in new cleaner to gets everything looking brand new. No effort just set timer and walk away.

what type of camera did you use to film this? excellent video quality

I put mine in ultrasonic cleaner and that seems to clean them the best

A+ once again, Thk u! 👍🏻

@AliMECH

3 жыл бұрын

Glad you liked it ✌

Nice job mate,thank you

@AliMECH

3 жыл бұрын

Thanks for watching

Thank you very much the video is great keep up the good work..simple and to a point no bs.

@AliMECH

8 ай бұрын

Glad it helped

I learned something new, thanks.

@AliMECH

2 жыл бұрын

Thanks for watching

I have a 2014 same engine 2ARFE with 165k miles I think I should clean my o2 sensor and this will also clean intake valves you said right? It looks pretty easy to do I might do it myself. Thanks

@AliMECH

3 жыл бұрын

Yes, you should, and you will definitely feel the deference

@jaleesxyz

3 жыл бұрын

@@AliMECH I have 2011 Corolla LE I want to clean my O2 sensor where is the vacuum line in my Corolla, is it same place as Camry you shoes in video or is it somewhere else.

@punktalley

2 жыл бұрын

@@jaleesxyz it should be on the intake side right before your manifold. Look for a connection after the air intake filter.

Awesome job. Learned a valuable tip.

@AliMECH

2 жыл бұрын

Thanks for watching

Two thumbs up! Excellent video!

@AliMECH

Жыл бұрын

Thank you! Cheers!

Brotha can I do this on my 3.0 d4d diesel Hilux? It's always good to do preventative maintenance right. 👍🏽

@AliMECH

3 жыл бұрын

Not a good idea to do that with diesel engines, I recommend to remove it and clean it outside the engine

@rayc1503

3 жыл бұрын

@@AliMECH thanks, Eid Kareem brotha 🤲🏼

@rayc1503

3 жыл бұрын

Meant to say Ramadan Kareem brotha, I guess I'm just looking forward to Eid ;) Allah Hafiz 🤲🏼

@AliMECH

3 жыл бұрын

I got ur message, thanks brother

Always put anti-seize compound on the threads of any hot section part....!

Is it possible to do this on a 2013 corolla? The pcv valve is under the air intake manifold.

Welldone Ali, excellent work, clear and straight forward.

@AliMECH

2 жыл бұрын

Thanks for watching

Another great video ✌️✌️👍👍👍

@AliMECH

3 жыл бұрын

Thanks Darin 🙏🏻

That oxygen sensor, according to the image, indicates that the mixture is too rich in fuel. Cleaning the sensor does not correct the problem. The check engine warning light only indicates that the emission level of the engine is not correct and that the lambda factor is not being met. On the other hand, zirconium dioxide, the main component of most oxygen sensors, degrades over time. Cleaning the outside of the sensor will only allow, in the best of cases, more gases to enter to react with the ceramic that performs the measurement (zirconium dioxide covered by a metallic layer). In short, if the check engine light comes on and the oxygen sensor is not degraded by use over time the problem is probably in the injection system. If the sensor has a long time of use or miles, change it.

@AliMECH

2 жыл бұрын

Yes that's right, I had one failed fuel injector, after I cleaner all the injectors, I wanted to speed up the process for cleaning all the O2 sensors, that's right, O2 sensor not getting dirty unless there is some serious problem

@Abdullah-hc1cz

2 жыл бұрын

what is the symptom of o2 sensor has degraded by use overtime?? please help coz my car has a high gas millage

@ihrtecnomecanica9420

2 жыл бұрын

​@@Abdullah-hc1cz The best way to tell if an oxygen sensor is out of use is by using an oscilloscope. Excessive consumption (up to 15%) can be a sign that the sensor is not working as it should and it is not possible to adjust the fuel consumption to the stoichiometric ratio (14.7 parts of air / 1 part of gasoline). However, excess consumption may be due to other factors that indirectly affect the signal sent by the oxygen sensor to the engine control unit, which is what regulates the duration and quantity of fuel injected to try to achieve perfect combustion (stoichiometric ratio): - worn spark plugs. - permanently open thermostat of the cooling system. - faulty engine temperature sensor. - Faulty injectors (diesel) or injection solenoid valves (gasoline). - defective catalytic converter

@p.c.h.6721

2 жыл бұрын

@@ihrtecnomecanica9420 Hey, thanks for the information. Quick question, is it reliable to use a Lambda sensor on a two stroke engine? They sell them but I fear the sensor won’t last too long and I will have to be replacing it very often, at the moment I’m using an EGT sensor but it’s a bit vague, It’s almost impossible to know whether the engine is tuned to perfection, Exhaust gas temperature can go from 650 degrees to easily 690 or even 700 and the engine is still performing fine, so maybe a Lambda would be more accurate, of course if the sensor lasts long enough to make it worth while. Thanks 🙏

@ihrtecnomecanica9420

2 жыл бұрын

​@@p.c.h.6721 Surely perfect for carb tuning, but I don't think an oxygen sensor while running a two-stroke engine will provide very reliable values. The exhaust gas flow in these engines is slow and pulsating, which will produce erroneous readings. Additionally, combustion in a two-stroke engine is less efficient (the exhaust gas contains a variable amount of unburned oil and gasoline in each cycle), which can also lead to misregistrations and sensor contamination. It is also true that the records of an EGT sensor can vary significantly based on heat, humidity and air density, but in two-stroke karts, for example, the EGT is the most widely used.

Cool. Will try to clean it when I change my spark plugs.

@AliMECH

2 жыл бұрын

Awesome

Could you use airflow metre spray too?

If an engine has direct injection, the intake valves can get very Carboned up. This process would be good to perform periodically..

@AliMECH

2 жыл бұрын

Yes exactly I did a video about it too, showed with proof that it clean the intake valves as well kzread.info/dash/bejne/np6Fztege7CfgJM.html

could you also post your odometer reading? just curious :D

@morganheberling

Жыл бұрын

@1:59 odometer read 32672. Cheers, love.

Thankyou very much , it work for my camry v6, all the best to you

@AliMECH

2 жыл бұрын

Thanks for your feedback

OMG. I tried this as I could Not pass SMOG Test and was Getting O2 Sensor code tho a new O2 sensor. It WORKED!!!! Thank You!! I passed

@AliMECH

Жыл бұрын

Thats great, Glad it helped

@ERod28

10 ай бұрын

So you replaced the oxygen sensor with a new one

That outer metal shield just protects the ceramic / working part of the sensor its not important that it is carboned that much

@fluxcapacitor1621

2 жыл бұрын

The condition of the outer shield is a strong indicator of the condition of the sensor under the shield. Is it really that difficult to figure out?

@davebar2017

2 жыл бұрын

@@fluxcapacitor1621 The ceramic gets super heated and cleans itself more likely it needs a new sensor us ASE master techs do mot clean them

It is a great video. But I am thinking if you can clean the O2 sensor like that, the catalytic converter should be cleaned as well right? So I don’t have to remove the o2 sensor and spray directly to the catalytic converter.

Will this work on any model? (I have an 02 bmw 540). Also, why use only half a can? I'd assume emptying the case might have better results. Please let me know. Thanks.

hi brother; very helpful video. i liked it. Hafiz from Canada

@AliMECH

9 ай бұрын

Glad you liked it

You forgot to mention USE Anti-Seize compound on threads so next time sensor comes out easy. Spark plugs too like Anti-Seize

@AliMECH

2 жыл бұрын

Yes that's a good idea to use, but I never use them, and never had any problem

@MrKoalatea

2 жыл бұрын

Ya it isn't smart to not use anti seize and he will have problems cause you can even see the rust on the threads.

@ThexXxXxOLOxXxXx

2 жыл бұрын

@@MrKoalatea Yeah now that you mention it the rust will probably cause a headache in the future

Good tip, but I understand you should apply anti-sieze

@juliuslapus2177

Жыл бұрын

What is an anti-seize Sir ?

This should work on all types of gasoline engines. Thx for sharing.

@AliMECH

3 жыл бұрын

Great suggestion! but i haven't tried it, i cant say anything about that

@garyshirinian

3 жыл бұрын

@@AliMECH thx for replying. I have 2002 Honda Accord 6 cylinders. I might try some day.

@AliMECH

3 жыл бұрын

@@garyshirinian Give your feed back if you did, thanks

@garyshirinian

3 жыл бұрын

@@AliMECH I will .

Do you use copper anti-seize on O2 sensor threads and exhaust threads to prevent galling?

@mirekchance

2 жыл бұрын

I use silver anti-seize on all that. Its a good practice, namely if you keeping the car.

@AliMECH

2 жыл бұрын

I didn't use it, but yes it's a good idea to use it

Carb cleaner will foul the 02 sensor-brakecleaner.without removing it as you remove it??

@louf7178

3 жыл бұрын

I tried acetone. Nothing else got wrecked (very diluted), not sure it had a problem anyway.

@imzjustplayin

2 жыл бұрын

@@louf7178 carb cleaner is basically acetone unless you go with the Berryman's B12 stuff, then it's 50% toluene and like 30% acetone with a bunch of other stuff.

Wouldn't hurt a thing to put some anti-seize copper on the O2 sensor threads before you thread it in, and tighten it. If you don't do this, the next time you need to remove it, might not be so easy!!

Hi thanks for sharing this video that was great 👍.

@AliMECH

2 жыл бұрын

Thanks for watching

Hi, tell me please, can I do this on my golf 4? If yes, wich air pipe should I use?

The threads of the O2 sensor should have anti-seize applied before reinstalling. Otherwise a good, useful video.

On some cars you have to reset the ECU to delete the adaptations, otherwise it's going to take forever for the ECU to adjust the mixture.

@leeatterberry1239

Жыл бұрын

Right because if you want to get paid and act like it's fixed you need to shut it off right now because it's one of those codes that don't come on for a while so after you make your money you can take off running

A year to late! My Oxy sensor threw a code and I had it replaced. not the end of the world, but I wish i knew this before! Thank you for the video. I will know what to do next time!

@AliMECH

2 жыл бұрын

Great to hear!

Excellent very nice and clear Ali, i am planning to perform same for 2006 Lexus ES330 but not able locate vacuume hose location, do you know whare can i find it.

Damn, with an engine that clean and rust free 🥰, how in the heck did that O2 sensor get so dirty?

@AliMECH

3 жыл бұрын

I have on clogged fuel injection, after cleaning it, I wanted to speed up the process for cleaning o2 sensor, even though, good fuel injection always clean the o2 sensor

@AliMECH

2 жыл бұрын

No, not a good idea, sometimes carb cleaner couses check engine light or mess up throttle if its electrical, that's why I spray it from pcv valve, it will enter carb cleaner after throttle

@mmark8394

2 жыл бұрын

@@AliMECH ⁶

Clear, concise explanation. All I would add would be to coat the O2 sensor threads with never-seize.

Great video, but where is that vacuum line located on camry 2007?

great video !! you just earned a new follower !!

@AliMECH

2 жыл бұрын

Awesome, thank you!

Put ANTISEIZE LUBRICATION on those threads!

I saw your other video about cleaning catalytic converters in a similar method, but in this method in this video would the spray cleaner also partially clean the catalytic converter? Also thank you for the videos, I love that you show us how to do things in an easier way :)

@jregamey

2 жыл бұрын

Run high octane and xylene take off vacuum from EGR so it stays closed. And run it like you stole it.

@elydiaz1031

Жыл бұрын

@@jregamey Great reply! - Is Xylene similar to Seafoam? - I ran Seafoam on old Civics by removing a line and pouring it slowly... lots of white smoke. In my 2007 Prius, I'm getting p0420 code on aftermarket cat (original was stolen), plus also interested in cleaning injectors (I use Marvel Mystery Oil here and there), and the O2 sensor was replaced like 2 years ago, Denso. Would 91 gas+Xylene help?

@keepitsolidkeepitreal2877

Жыл бұрын

@@jregamey Hi where can I find Xylene in Auto part store or Walmart or Lowe’s ??? 🤙

I have a 2008 BMW with N43 2.0 petrol engine. I have intermittent rough idle, still there after changing plugs and coils recently. Also, suspect O2 sensor problem, but not sure where the sensor is (there seem to be a few similar looking) or where to spray MAF cleaner spray. Any advice appreciated.

Thanks for using your time to show this video, helpful information

@AliMECH

4 ай бұрын

Glad it was helpful!

Beautiful 💓❣️ Art of mechanical engineering

@AliMECH

2 жыл бұрын

Thanks man

Why not use mas flow o2 sensor instead of carb spray

@NoOne12

Жыл бұрын

Cause carb cleaner is cheaper generally.

@BikeStandByMe

Жыл бұрын

Mass air flow cleaner is basically electronic parts cleaner and won’t cut the carbon build up. The problem with cleaning an oxygen sensor is it may not help if the sensor has broken down, low voltage output or is lazy. So it doesn’t hurt to try but it may not help.

Great video. Can this be done to 97 GMC suburban and which vacuum hose do I use?

@keepitsolidkeepitreal2877

Жыл бұрын

Brake booster or Through the Egr hole that enter’s into upper intake or under the throttle body spacer ✅🤙👍

Excellent video on a common problem. How do I know which vacuum to attach the cleaner tube to on my 03 Camry 2.4L?

@AliMECH

2 жыл бұрын

Look for a hose, that's connected from intake to engine cover

@abodao

2 жыл бұрын

@@AliMECH Thanks, Ive subscibed to your channel to learn more.

@AliMECH

2 жыл бұрын

@@abodao thanks 🙏