Thanks brother. I went a different route and was able to dissect the clock spring harness from a donor vehicle and do a factory install with the connectors intact. However, I never would have gotten it all apart without your videos. Now my 2006 manual work truck has cruise and it only cost me $40 to pull the parts from a wreck.

Thank you for taking the time to make this video. It helped me a ton to add cruise control to my truck. Very well made video!

Youre the man!!! I just bought a 2003 4.3L same package but with automatic transmission, was sad it didnt have cruise but the truck only had 54k on it. Glad to know adding cruise is possible on this truck, and this guide will ensure i wont mess it up! Thanks!

This is how the cruise is wired: Multi-function switch Truck/ C201 Blue B1 Grey/Black Black B10 Blue Pink B18 Brown Grey B32 Grey ACDelco D6299A GM Original Equipment Combination Switch was my choice, although there are cheaper options. Thanks for this tutorial. Giving the part number of the metri-pack connectors was crucial to my success! Thank you for the research, the Chevy dealer, and Alldata were no help. Ask for GT-280 Metri-pack connectors. The ones i got from Amazon did not work, so I went to the Chevy dealer. The parts guy was nice enough to get some out of the tool room for me--They are not in parts. Having the correct connectors is the key to this job. I could do it in an hour if I have the correct terminals. Having the correct crimpers and a release tool is a good idea too. The video shows how to manipulate the connector. Rostra tells you to disconnect the harness from the ECM, pull it into the cab, and solder to the wires behind C201. BELIEVE me, you do NOT have/want to do that. As you can see, Black and Blue wires are opposite which is counter intuitive. Pink is switched power--If you use B18 it is fused off of the fuse panel under cruise. To connect the wires, I had some smaller Metri-pack male terminals that worked with the Metri-pack female terminals after I removed them from the quad connector. I just put some shrink wrap to hold them together, and tyrapped them to the other wires. If I was to do this again, I would make the colors match instead of following the wiring diagram colors. Since it is an older truck, Autozone has the schematics for free. I tried to post a wiring diagram, but it does not work. Again, thanks for the videos. They made it seem like I know what I am doing!

@rustyshackleford5058

3 жыл бұрын

What do you mean if you use b18 its fused off the fuse panel under cruise? I know where the cruise fuse is and connected a pink wire coming off b18 to the fuse while b18 was also plugged in to the bcm. I also connected pink wire to pink A2 power wire and neither work, at this point I'm thinking its the cheap chinese turn stalk, except everything else on it works but cruise. Its getting really frustrating as 4 wires shouldn't be this difficult!! Any help would be a life saver

@joelopez7649

2 жыл бұрын

@@rustyshackleford5058 I'm in the same boat, did you ever figure out what the issue was? I seem to have everything connected correctly but cruise does not work, it seems like it is not getting power, but like you, everything else on the stalk works (turn signals, wipers)

@rustyshackleford5058

2 жыл бұрын

@@joelopez7649 Haven't got to replacing the stalk to finding out yet, but I remember last time I tried cruise, pushing the accelerate cruise it literally started smoking on me lol. I'll update when I replace one w/oem from a junkyard, lemme know if you get yours working/what you changed too!

@iggyrulz420

10 ай бұрын

I hear if you have LED tail lights the cruise control won't work unless you put in a resistor.

@christopherbalicki937

9 күн бұрын

@@joelopez7649perhaps you need to add the 10 amp fuse?

Thanks for making this video

Appreciate the video. Researching now how to do this on my 03. Can you post links to the items you bought online?

Awesome demo. I would go to junk yard and remove harness. 4 wires and a plug. Keep it oem

Thank you for the video!! So I followed your step by step on installing the cruise control but couldn’t get mine to work?? Wondering if you had any trouble shooting solutions?? My truck is WT model 2004 Chevy Silverado... it had a 4.3 v6 with automatic trans originally and about 5 years ago had it switched to a 4.8 v8 automatic ... other than that it’s stock

Question:: since you bought the ac delco stalk,,, i noticed your stalk wire colors are different than the cheap one I bought,, do the stalk wire colors match the truck wire colors where you plugged your “harness into the block

Do you have a wire connection list? Like B1, B10,B18,B32 connected to which controller wires?

Yes yes

What do you do with the pink wire

Would anyone know what would cause it to instantly blow a fuse as soon as I press the set cruise? The wires are all separated and nothing is touching ground

Can you provide the colors of the switch to what b terminals you went to.

@xraydelta7

4 жыл бұрын

Yes. This would be most helpful

@xraydelta7

4 жыл бұрын

pink is B18 Blue is B1 Black is B10 Grey is B32 You can read the hand drawn schematic at 9:19 in the video

@dat_boi_jo6941

9 ай бұрын

@@xraydelta7what if my stock has yellow and red what would they go to? I got the blue and black ones done

Can i call you it doesn’t matter if you charge me for helping me i got a obs 1990 with ls engine swap and want too make the obs 1990 cruise control module work change the cable for the newer throtle and my throttle is drive by cable

I have 2007 classic 1500 need help with the 4 wire number code. my colors are red, blue, black and yellow can you help

@cyrusratliff6775

10 ай бұрын

did you ever find an answer?

@dat_boi_jo6941

9 ай бұрын

Do you have an answer?