Thanks brother. I went a different route and was able to dissect the clock spring harness from a donor vehicle and do a factory install with the connectors intact. However, I never would have gotten it all apart without your videos. Now my 2006 manual work truck has cruise and it only cost me $40 to pull the parts from a wreck.
@hitekjohnson4 ай бұрын
Question:: since you bought the ac delco stalk,,, i noticed your stalk wire colors are different than the cheap one I bought,, do the stalk wire colors match the truck wire colors where you plugged your “harness into the block
@user-wc5us2fv1y8 ай бұрын
What do you do with the pink wire
@dat_boi_jo69419 ай бұрын
What’s the part number or link to those plugs I can’t find them
@taylorc2542 Жыл бұрын
This is asking for a lifetime squeaks and rattles after you remove the factory tightness.
@monstermudratroddragworth3738 Жыл бұрын
Thanks for making this video
@jamescc2010 Жыл бұрын
My handle is kind of stuck after we put in back. I think it might be broken inside. Now having hard time sliding it out.
@jaxjax5322 Жыл бұрын
Can i call you it doesn’t matter if you charge me for helping me i got a obs 1990 with ls engine swap and want too make the obs 1990 cruise control module work change the cable for the newer throtle and my throttle is drive by cable
@jaxjax5322 Жыл бұрын
Can you help me i am building a 1990 obs silverado with a factory cruise control too a ls engine with drive by cable and change the cable on the cruise module too the new one for throttle body and still doesn’t wants too work and the pins has signal and the odometer is reading 😢
@guitarguy3221 Жыл бұрын
Thanks so much for uploading this. This is the only vid i've found of a dbc cruise control install I take it the 4.3L 2005 will be the same process as a 5.3L 2002 since they're both dbc? edit: The cruise switch was made different 99-02 than it was 03-06 regardless of dbc/dbw. The 99-02 is $60 on amazon and has 3 pigtails coming out of it instead of 1. My 02 truck already has the cruise plug beside the brake booster
@digbystridiron40712 жыл бұрын
I have 2007 classic 1500 need help with the 4 wire number code. my colors are red, blue, black and yellow can you help
@cyrusratliff67759 ай бұрын
did you ever find an answer?
@dat_boi_jo69419 ай бұрын
Do you have an answer?
@trevorwilson94102 жыл бұрын
Where did you buy gem black handles?
@rustyshackleford50582 жыл бұрын
Would anyone know what would cause it to instantly blow a fuse as soon as I press the set cruise? The wires are all separated and nothing is touching ground
@5364310gb3 жыл бұрын
Thanks for taking the time to do this video. I now have cruise control.
@rangerismine3 жыл бұрын
Great video. I was adding cruise control to my 2005 silverado and was having trouble pulling the connector apart. Unfortunately mine didn’t have the 4 pin plug already installed, so I just connected the 4 wires behind the big connector.
@leemckinney71782 жыл бұрын
I am adding cruise to a 06 gmc sierra 4.8L. I was thinking the same thing but I do not know where the 4 wires land and what colors? Can you send me the information on which wires to connected to?
@chrisrogers22683 жыл бұрын
Great video. I wish you would make one showing how to change all the window trim, mainly the rear quarter panels.
@cgmwoodworx3 жыл бұрын
Can you list the part numbers? I screen shot the ones you showed.
@frognan9893 жыл бұрын
Do you have a wire connection list? Like B1, B10,B18,B32 connected to which controller wires?
@davep10213 жыл бұрын
Thank you for taking the time to make this video. It helped me a ton to add cruise control to my truck. Very well made video!
@T_money_3 жыл бұрын
hhehehehehehehehhehehehehehheheheheheehehhe
@rolandos644 жыл бұрын
Rather than buying parts. Go to a pick your part and remove one. I just did. Factory colors/parts.... much cheaper/faster than buying one. You can learn while you are at it. How to remove pins and all
@rolandos644 жыл бұрын
Awesome demo. I would go to junk yard and remove harness. 4 wires and a plug. Keep it oem
@26menace14 жыл бұрын
Thank you for the video!! So I followed your step by step on installing the cruise control but couldn’t get mine to work?? Wondering if you had any trouble shooting solutions?? My truck is WT model 2004 Chevy Silverado... it had a 4.3 v6 with automatic trans originally and about 5 years ago had it switched to a 4.8 v8 automatic ... other than that it’s stock
@T_money_4 жыл бұрын
Yes yes
@douglaswalker85634 жыл бұрын
This is how the cruise is wired: Multi-function switch Truck/ C201 Blue B1 Grey/Black Black B10 Blue Pink B18 Brown Grey B32 Grey ACDelco D6299A GM Original Equipment Combination Switch was my choice, although there are cheaper options. Thanks for this tutorial. Giving the part number of the metri-pack connectors was crucial to my success! Thank you for the research, the Chevy dealer, and Alldata were no help. Ask for GT-280 Metri-pack connectors. The ones i got from Amazon did not work, so I went to the Chevy dealer. The parts guy was nice enough to get some out of the tool room for me--They are not in parts. Having the correct connectors is the key to this job. I could do it in an hour if I have the correct terminals. Having the correct crimpers and a release tool is a good idea too. The video shows how to manipulate the connector. Rostra tells you to disconnect the harness from the ECM, pull it into the cab, and solder to the wires behind C201. BELIEVE me, you do NOT have/want to do that. As you can see, Black and Blue wires are opposite which is counter intuitive. Pink is switched power--If you use B18 it is fused off of the fuse panel under cruise. To connect the wires, I had some smaller Metri-pack male terminals that worked with the Metri-pack female terminals after I removed them from the quad connector. I just put some shrink wrap to hold them together, and tyrapped them to the other wires. If I was to do this again, I would make the colors match instead of following the wiring diagram colors. Since it is an older truck, Autozone has the schematics for free. I tried to post a wiring diagram, but it does not work. Again, thanks for the videos. They made it seem like I know what I am doing!
@rustyshackleford50583 жыл бұрын
What do you mean if you use b18 its fused off the fuse panel under cruise? I know where the cruise fuse is and connected a pink wire coming off b18 to the fuse while b18 was also plugged in to the bcm. I also connected pink wire to pink A2 power wire and neither work, at this point I'm thinking its the cheap chinese turn stalk, except everything else on it works but cruise. Its getting really frustrating as 4 wires shouldn't be this difficult!! Any help would be a life saver
@joelopez76492 жыл бұрын
@@rustyshackleford5058 I'm in the same boat, did you ever figure out what the issue was? I seem to have everything connected correctly but cruise does not work, it seems like it is not getting power, but like you, everything else on the stalk works (turn signals, wipers)
@rustyshackleford50582 жыл бұрын
@@joelopez7649 Haven't got to replacing the stalk to finding out yet, but I remember last time I tried cruise, pushing the accelerate cruise it literally started smoking on me lol. I'll update when I replace one w/oem from a junkyard, lemme know if you get yours working/what you changed too!
@iggyrulz42010 ай бұрын
I hear if you have LED tail lights the cruise control won't work unless you put in a resistor.
@christopherbalicki9374 күн бұрын
@@joelopez7649perhaps you need to add the 10 amp fuse?
@jacojanks59854 жыл бұрын
Can you provide the colors of the switch to what b terminals you went to.
@xraydelta74 жыл бұрын
Yes. This would be most helpful
@xraydelta74 жыл бұрын
pink is B18 Blue is B1 Black is B10 Grey is B32 You can read the hand drawn schematic at 9:19 in the video
@dat_boi_jo69419 ай бұрын
@@xraydelta7what if my stock has yellow and red what would they go to? I got the blue and black ones done
@mr.keepitreal22005 жыл бұрын
Great video- I am planning on adding cruise control to my truck.
@PappaSmurf695 жыл бұрын
did it on my 2003 4.3L today, everything was plug and play, it had the 4 pin connector and fuse for cruise already installed!
@hankyhates3 жыл бұрын
Was it auto? I think that's why.
@jasonrobbins46645 жыл бұрын
Appreciate the video. Researching now how to do this on my 03. Can you post links to the items you bought online?
@PappaSmurf695 жыл бұрын
Youre the man!!! I just bought a 2003 4.3L same package but with automatic transmission, was sad it didnt have cruise but the truck only had 54k on it. Glad to know adding cruise is possible on this truck, and this guide will ensure i wont mess it up! Thanks!
Пікірлер
Thanks brother. I went a different route and was able to dissect the clock spring harness from a donor vehicle and do a factory install with the connectors intact. However, I never would have gotten it all apart without your videos. Now my 2006 manual work truck has cruise and it only cost me $40 to pull the parts from a wreck.
Question:: since you bought the ac delco stalk,,, i noticed your stalk wire colors are different than the cheap one I bought,, do the stalk wire colors match the truck wire colors where you plugged your “harness into the block
What do you do with the pink wire
What’s the part number or link to those plugs I can’t find them
This is asking for a lifetime squeaks and rattles after you remove the factory tightness.
Thanks for making this video
My handle is kind of stuck after we put in back. I think it might be broken inside. Now having hard time sliding it out.
Can i call you it doesn’t matter if you charge me for helping me i got a obs 1990 with ls engine swap and want too make the obs 1990 cruise control module work change the cable for the newer throtle and my throttle is drive by cable
Can you help me i am building a 1990 obs silverado with a factory cruise control too a ls engine with drive by cable and change the cable on the cruise module too the new one for throttle body and still doesn’t wants too work and the pins has signal and the odometer is reading 😢
Thanks so much for uploading this. This is the only vid i've found of a dbc cruise control install I take it the 4.3L 2005 will be the same process as a 5.3L 2002 since they're both dbc? edit: The cruise switch was made different 99-02 than it was 03-06 regardless of dbc/dbw. The 99-02 is $60 on amazon and has 3 pigtails coming out of it instead of 1. My 02 truck already has the cruise plug beside the brake booster
I have 2007 classic 1500 need help with the 4 wire number code. my colors are red, blue, black and yellow can you help
did you ever find an answer?
Do you have an answer?
Where did you buy gem black handles?
Would anyone know what would cause it to instantly blow a fuse as soon as I press the set cruise? The wires are all separated and nothing is touching ground
Thanks for taking the time to do this video. I now have cruise control.
Great video. I was adding cruise control to my 2005 silverado and was having trouble pulling the connector apart. Unfortunately mine didn’t have the 4 pin plug already installed, so I just connected the 4 wires behind the big connector.
I am adding cruise to a 06 gmc sierra 4.8L. I was thinking the same thing but I do not know where the 4 wires land and what colors? Can you send me the information on which wires to connected to?
Great video. I wish you would make one showing how to change all the window trim, mainly the rear quarter panels.
Can you list the part numbers? I screen shot the ones you showed.
Do you have a wire connection list? Like B1, B10,B18,B32 connected to which controller wires?
Thank you for taking the time to make this video. It helped me a ton to add cruise control to my truck. Very well made video!
hhehehehehehehehhehehehehehheheheheheehehhe
Rather than buying parts. Go to a pick your part and remove one. I just did. Factory colors/parts.... much cheaper/faster than buying one. You can learn while you are at it. How to remove pins and all
Awesome demo. I would go to junk yard and remove harness. 4 wires and a plug. Keep it oem
Thank you for the video!! So I followed your step by step on installing the cruise control but couldn’t get mine to work?? Wondering if you had any trouble shooting solutions?? My truck is WT model 2004 Chevy Silverado... it had a 4.3 v6 with automatic trans originally and about 5 years ago had it switched to a 4.8 v8 automatic ... other than that it’s stock
Yes yes
This is how the cruise is wired: Multi-function switch Truck/ C201 Blue B1 Grey/Black Black B10 Blue Pink B18 Brown Grey B32 Grey ACDelco D6299A GM Original Equipment Combination Switch was my choice, although there are cheaper options. Thanks for this tutorial. Giving the part number of the metri-pack connectors was crucial to my success! Thank you for the research, the Chevy dealer, and Alldata were no help. Ask for GT-280 Metri-pack connectors. The ones i got from Amazon did not work, so I went to the Chevy dealer. The parts guy was nice enough to get some out of the tool room for me--They are not in parts. Having the correct connectors is the key to this job. I could do it in an hour if I have the correct terminals. Having the correct crimpers and a release tool is a good idea too. The video shows how to manipulate the connector. Rostra tells you to disconnect the harness from the ECM, pull it into the cab, and solder to the wires behind C201. BELIEVE me, you do NOT have/want to do that. As you can see, Black and Blue wires are opposite which is counter intuitive. Pink is switched power--If you use B18 it is fused off of the fuse panel under cruise. To connect the wires, I had some smaller Metri-pack male terminals that worked with the Metri-pack female terminals after I removed them from the quad connector. I just put some shrink wrap to hold them together, and tyrapped them to the other wires. If I was to do this again, I would make the colors match instead of following the wiring diagram colors. Since it is an older truck, Autozone has the schematics for free. I tried to post a wiring diagram, but it does not work. Again, thanks for the videos. They made it seem like I know what I am doing!
What do you mean if you use b18 its fused off the fuse panel under cruise? I know where the cruise fuse is and connected a pink wire coming off b18 to the fuse while b18 was also plugged in to the bcm. I also connected pink wire to pink A2 power wire and neither work, at this point I'm thinking its the cheap chinese turn stalk, except everything else on it works but cruise. Its getting really frustrating as 4 wires shouldn't be this difficult!! Any help would be a life saver
@@rustyshackleford5058 I'm in the same boat, did you ever figure out what the issue was? I seem to have everything connected correctly but cruise does not work, it seems like it is not getting power, but like you, everything else on the stalk works (turn signals, wipers)
@@joelopez7649 Haven't got to replacing the stalk to finding out yet, but I remember last time I tried cruise, pushing the accelerate cruise it literally started smoking on me lol. I'll update when I replace one w/oem from a junkyard, lemme know if you get yours working/what you changed too!
I hear if you have LED tail lights the cruise control won't work unless you put in a resistor.
@@joelopez7649perhaps you need to add the 10 amp fuse?
Can you provide the colors of the switch to what b terminals you went to.
Yes. This would be most helpful
pink is B18 Blue is B1 Black is B10 Grey is B32 You can read the hand drawn schematic at 9:19 in the video
@@xraydelta7what if my stock has yellow and red what would they go to? I got the blue and black ones done
Great video- I am planning on adding cruise control to my truck.
did it on my 2003 4.3L today, everything was plug and play, it had the 4 pin connector and fuse for cruise already installed!
Was it auto? I think that's why.
Appreciate the video. Researching now how to do this on my 03. Can you post links to the items you bought online?
Youre the man!!! I just bought a 2003 4.3L same package but with automatic transmission, was sad it didnt have cruise but the truck only had 54k on it. Glad to know adding cruise is possible on this truck, and this guide will ensure i wont mess it up! Thanks!