Chevrolet Silverado Adding Cruise Control Part 1
Adding cruise control to a 2005 Chevy Silverado. Videos shows adding cruise control to a 4.3l V6, 5 speed manual base model Silverado. This truck did not come from the factory with the 4 pin harness to connect to the cruise control turn signal stalk. This video show how to add the required wiring to make it work. This should apply to some 4.8L and 5.7L 2003-2007 Silverados as well. Total cost was about $100 ($35 for new turn signal switch with cruise control from amazon, $39 for a 2001 Blazer used cruise control motor/actuator off of eBay, $12 for the factory spade lugs, $15 for wire, solder, heat shrink, flux.)
Пікірлер: 10
Great video- I am planning on adding cruise control to my truck.
Great video. I was adding cruise control to my 2005 silverado and was having trouble pulling the connector apart. Unfortunately mine didn’t have the 4 pin plug already installed, so I just connected the 4 wires behind the big connector.
@leemckinney7178
2 жыл бұрын
I am adding cruise to a 06 gmc sierra 4.8L. I was thinking the same thing but I do not know where the 4 wires land and what colors? Can you send me the information on which wires to connected to?
did it on my 2003 4.3L today, everything was plug and play, it had the 4 pin connector and fuse for cruise already installed!
@hankyhates
3 жыл бұрын
Was it auto? I think that's why.
Thanks for taking the time to do this video. I now have cruise control.
Thanks so much for uploading this. This is the only vid i've found of a dbc cruise control install I take it the 4.3L 2005 will be the same process as a 5.3L 2002 since they're both dbc? edit: The cruise switch was made different 99-02 than it was 03-06 regardless of dbc/dbw. The 99-02 is $60 on amazon and has 3 pigtails coming out of it instead of 1. My 02 truck already has the cruise plug beside the brake booster
What’s the part number or link to those plugs I can’t find them
Rather than buying parts. Go to a pick your part and remove one. I just did. Factory colors/parts.... much cheaper/faster than buying one. You can learn while you are at it. How to remove pins and all
Can you help me i am building a 1990 obs silverado with a factory cruise control too a ls engine with drive by cable and change the cable on the cruise module too the new one for throttle body and still doesn’t wants too work and the pins has signal and the odometer is reading 😢