Ah man, I've been struggling with this for months. Can't believe how simple the fix is. Easy when you have the right info

@RoboticMowerServices

3 жыл бұрын

It's very easy to over look a lot of these little items.

You guys are Awesome! Thank you for providing these great tips.

@RoboticMowerServices

3 жыл бұрын

Thanks for commenting! Have you checked out our new website www.roboticmowerservices.com? We have a tech support section (www.roboticmowerservices.com/tech-support) that makes it very easy to find trouble shooting information for your Automower

Another problem solved, u are an absolute lifesaver. On top of this I've recently just fixed my second wheel motor problem because of ur videos, 2 motors fixed for a €5 tube of grease

@RoboticMowerServices

2 жыл бұрын

Glad to hear it! If you get a chance, let us some feedback on our Google business page. The people at Husqvarna love hearing stories like this! g.page/r/CaurdQ-dEkL6EAI/review

My 305 displays this error, i have verified that it actually does park correctly and does connect to the contacts, but alas it drives out and tries again. Any ideas?

I have a slightly muddy patch in a part of my garden and I didn't realise that the small bit of mud that would get caked around the front wheel of my Flymo easiLife (different mower I know, but close enough) and it was raising the front of the mower by a tiny tiny amount but it was still enough that it wouldn't dock correctly and would give the 'Charging Station Blocked' error. It was driving me mad for ages until I figured it out!

I realigned the base to guide wire and flattened the foundation, problem solved! Thank you very much!

@RoboticMowerServices

3 жыл бұрын

AWESOME!!!! Glad we could help!

really useful, thanks from UK!

@RoboticMowerServices

2 жыл бұрын

Thanks for the feedback!

@kamranhussein868

2 жыл бұрын

@@RoboticMowerServices how about where the error message is 'stuck in charger' and the automaker won't come out of the charger? and I've made sure the ground is level. Any ideas?

I had this error after 1 year of operating my 315. But my error was caused by another issue i just want to bring up to help others. I had a build up of grass around the rear "joysticks" (the two spring posts that bring the body back to center after running into an obstruction). So when the mower pushes into the dock, the resistance of the grass would not let the body return to the normal position. I took off the body and cleaned the grass away and all is working.

Well, that was easy (once you know the secret). My 315 automower ran fine last year but would not go on the charger this year and it was driving me crazy. I moved it to slightly flatter ground but I think the key was to run the guide wire down the right hand channel. She parked in a minute. Thanks!

@RoboticMowerServices

3 жыл бұрын

Glad we could help!

Thank you

@RoboticMowerServices

2 жыл бұрын

You're welcome

In my case this error was caused by a failure of the two-pin Molex connector between the cable from the charging contacts and the charging cable to the battery. There was high resistance and the connector partially melted. This is on a 435x.

@RoboticMowerServices

4 ай бұрын

That issue is more noticeable on the AWD's, 450's, and 550's because they use the 7 amp transformers. The higher current heats up the areas with resistance more than the lower amperage transformers. The lower amperage ones can still do it, but its a slower burn than the 7 amp systems

I've started having this problem since 4-5 days. I have a Husqvarna 330X and it goes into the charging station and then veers to the left....after around being half way on the mat. So, it never was actually touching the charging contacts. It keeps reversing and then going left or sometimes right and then eventually stops. And when I find it, its standing almost parallel to the station always...except the back of it is still partly on the mat. Tried what you suggest on this video on the leveling part....but doesn't solve the problem. And there is no guiding wire under the mat. So, I'm stumped :(

I have had a problem similar to the ones described however it all seemed to start when I lowered the cutter to position 41/2 the mower (a 315X) would arrive at the charging station but would not go on to the mat, after a few more tries it would give the error "charging station blocked" after trying all the usual things the problem wouldn't go away, as a last resort I raised the blades to position 5 and presto! back in business, a closer examination of the area leading to the mat revealed a small bump which was not noticeable from a standing position, obviously, since the ground sloped up very slightly to the mat that the smaller ground clearance was causing the blade carrier to contact the ground. Currently I am accepting the problem by not attempting to lower the blades to position 4 which is as low as I want because it's mid season and reckon there is a lot of work involved in making the "landing area" as I call it a little longer. the "landing area" obviously needs to be as level as the mat so that the mower can have a clear run to get onto the mat.

@stephenbrian4591

3 жыл бұрын

I realize I am kinda off topic but do anybody know of a good site to stream new series online?

@dustinjamal8689

3 жыл бұрын

@Stephen Brian flixportal :P

@stephenbrian4591

3 жыл бұрын

@Dustin Jamal thanks, I went there and it seems like a nice service :D Appreciate it !!

@dustinjamal8689

3 жыл бұрын

@Stephen Brian no problem =)

Does the guide wire placement also apply to the 450x? Mine actually drives under the contacts frequently.

@RoboticMowerServices

3 жыл бұрын

If it is driving under the charging contacts than either your charging station plate is bowed (not level), your front tires are worn completely flat and need to be changed, or possibly your front lift sensor springs are worn out and the top cover is sitting down on the upper chassis rather than "floating" above it. Out of all of these scenarios the unlevel charging station plate is the most common one we see.

@corystansbury

3 жыл бұрын

@@RoboticMowerServices Per your advice, I leveled it last night (and it had settled downhill). I will see how it does and check back. I will say it seems like the hinged charge contact plate moves easier than it should. I had it open to change a board last year (lightning grenaded it) and I doubt I screwed up anything going back together, but may be worth another look

@RoboticMowerServices

3 жыл бұрын

@@corystansbury That's always a possibility, but not nearly as likely as the other scenarios. I would say if leveling the charging station doesn't solve it then pull off the top cover of the Automower and see if the magnet holder in the nose of the mower is rubbing against the upper chassis.

@corystansbury

2 жыл бұрын

@@RoboticMowerServices BTW, I ordered some springs tonight (hard to find). It certainly seems that the springs are pretty weak on the current joysticks. I probably could be accused of having let heavy grass build up on the lid over time, which I'm sure weakened the springs over time. Once we get to mowing season here in Maine (still a ways off), I'll feel better knowing those are changed out.

My charging station/dock only has one way to route the cable and its right down the center. What should I do? I have the 115H

@RoboticMowerServices

9 ай бұрын

Down the middle is the way it gets routed for the 115H

Seems the high cuts are more prone to this than the originals. I think Husqvarna made a mistake in making the margin of error for docking so tiny, other brands are less prone. If fact, its becoming such an issue I'm considering on new installs to do a more permanent leveling.

@wwindsunrain

4 ай бұрын

The copper used to make the contacts is expensive, so they don't like to make them too big.

My 450x will dock, but then leaves after a few seconds, makes several attempts and then stops with “charging system problem” message. Is that likely the same issue you demonstrated here?

@RoboticMowerServices

Жыл бұрын

No, that is this issue: kzread.info/dash/bejne/h6yT3NZtiJSpdrg.html If you check the info to see what's coming through to the mower and it is the correct current then take it to the dealer to have the software updated. They added something to a recent software update that gives the mower more time to sense the correct amount of charge current rather than having to replace the mower's main board.

My issue isn't that the error is "charging station blocked". The error is "charging station error". The mower (Husqvarna 550) will make it's way back to the charging station, dock, wait 10-15 seconds and then back out again and do it all over again. This happens about 8 times and then it gives me the "charging station error" message. This might be the wrong video to ask this question but it is the only one close to the issue I'm having. Thanks for any feedback you have.

@DenverDaddio

2 жыл бұрын

I’m having this same issue with a 435x. I’ve used a level and put the base on a flat surface and still get this issue.

@Truthbomb918

2 жыл бұрын

Have ye managed to sort this, I've a 430x and this has happened to me since I got firmware updated. I have a work around that only works for a day and then resets

@famsudan

Жыл бұрын

Same here. I have a 315 and I'm getting this error since my charging station was replaced. My technician says it's the robot, not the station. Did you manage to solve the problem?

@stephenslingerland

Жыл бұрын

My 450x is doing exactly this. The dealer told me it was fixed but it’s doing the same thing. Did you ever find a solution?

@Stavlo88

Жыл бұрын

@@stephenslingerland I have not figured it out. It definitely is an issue with the mower itself. I have swapped charging stations and I get the same result. Only thing I can do now is manually place the mower in the charging station and then it is good to to for a few days but the error reappears.

Mine drives into the charging station but it goes in and out again like 4 times with the error charging station blocked at the end but sitting completely fine in station just not charging. I have cleaned the charging contacts and tried another charging station same problem.

@RoboticMowerServices

3 жыл бұрын

What model mower do you have?

@Oldschoolgamerdad

3 жыл бұрын

@@RoboticMowerServices Gardena R50li

Good information. But this video could have been 1 minute.

My charging station recently got a new card. But F and N signal says not connected. But it is 😢

@RoboticMowerServices

Жыл бұрын

Have you checked the antenna wire to see if there is any physical damage to it?

@davidperry4026

Жыл бұрын

@@RoboticMowerServices yes Its perfect continuity is good.

In other words, it’s a manufacturer defect that should be recalled because they didn’t used a high quality enough material that doesn’t flex because they wanted to be cheap?

@RoboticMowerServices

19 сағат бұрын

How is there a manufacturers defect? The charging station gets screwed to the ground. If the ground is unlevel then the station will be unlevel. If the charging station didn't match the contour of the ground then there would be a step up or down in front of the charging station that would prevent the mower from driving on it.

Give me a break. Are you seriously saying the robot won’t get into the charge station with even a slight bow in the base? Terrible design if this is true. I think it’s actually an engineering failure. Poor power control and bad software.