Keith, great video! I really enjoy your videos. You do a great job explaining things. I just hit 600 miles on my 2016 Super Tenere that I purchased late last season. This video came in handy as I was changing the oil for the first time yesterday. At the end of the video you say that 4.4 quarts is specified in the owner’s manual. My 2016 manual states 3.4 quarts for an oil and filter change, and 3.1 quarts when only changing the oil. The 3.4 quarts was accurate for me. Oddly enough the owner’s manual recommends the oil be changed every 4,000 miles, and the filter (and oil) only every 8,000 miles. So every other oil change we simply need to drain the oil and refill.

@AdventuresWithMe00

6 жыл бұрын

Hi Matt, thanks for catching that error for me. I don't know where the 4.4 quarts came from. I re-checked the manual. My 2014 one said 3.6 quarts for oil and filter and 3.3 for not changing the filter. I've found I tend to overfill it so I will try the 3.4 quarts.

@MNK176

6 жыл бұрын

AdventureswithMe No problem Keith! Thanks for all the videos. They definitely influenced my decision to purchase my bike. The oil and filter change was easy with your help. The gear oil change was also very easy. Keep the videos coming!

@AdventuresWithMe00

6 жыл бұрын

Thank you Matt! I make the videos so others can learn from my experience so your words mean a great deal to me. Our weather is starting to warm up now so I think it will be time to take the Tenere out of hibernation and start making motorcycle videos again!

I recent acquired a 2016 Super Tenere and I am going through it doing all the routine maintenance and I really really appreciate these guided videos! Thank you so much!

Great videos.... Just picked up a 2018 ES.... Watched all of your how to vids..... Thanks for doing this......

@AdventuresWithMe00

6 жыл бұрын

Thank you Howard, I really appreciate that. Now you have a nicer bike than I do! Ha ha. Congratulations on the '18. You're going to love it.

Outstanding explanation. Straight to the point with specific information. Thanks,

@AdventuresWithMe00

6 жыл бұрын

Thank you!

Keith, simple but great video. Thanks

Nice video. I found the hardest part of the engine and shaft drive oil change is finding a perfectly level surface to get accurate readings.

Your explanation are excellent and useful ...so easy to do thank you!

@AdventuresWithMe00

3 жыл бұрын

Glad it helped!

Good job, helped me a lot to do my first s10 oil change! Tnx!

@AdventuresWithMe00

6 жыл бұрын

Glad to help! Thanks for the comment!

You should use motorcycle-specific oil, not car oil. The reason is, modern car oils have additives to reduce friction to improve gas mileage, and this works against the friction needed for the clutch to grab of course. Maybe you didn't have problems because you don't work the clutch very hard? Look at your owner's manual. Mine for a 2019 XT250 says "...do not use oils labelled ENERGY CONSERVING II or higher." It also specifies "JASO standard MA".

@AdventuresWithMe00

2 жыл бұрын

I've been using this oil on all my bikes for more than 15 years with no issues. Over 150,000 miles.

@f42un84u

Жыл бұрын

It states in 2022 Yamaha manual to not use diesel or automotive oils, only motorcycle. Rotella is a diesel oil.

Engine Oil Level 3.28 QTS Engine Oil Level With Filter 3.59 QTS Engine Oil Level with Overhaul 4.44 QTS

@AdventuresWithMe00

3 жыл бұрын

Thank you for that. Even knowing that I still overfill the damn thing.

It looked as if you got just as much oil on you as you got in the oil pan! 😆 I’ve had the problem with overfilling from the dealer, it can really cause a mess. Best to keep it on the lower end of the view glass. Thanks, easy enough to do on your own.

@AdventuresWithMe00

6 жыл бұрын

If I ever do a bloopers video I will show how the oil got all over my leg. Good catch!

Hi mate the bike should be on the sidestand to drop the oil or else it doesnt all come out. hopes this helps.

Great video, one major problem. The part where you talk about the oil. I read the owners manual days before I changed the oil and filter at 600 miles for the first time. As I was changing it, I didn't remember how much oil to put back. That what brought me to your video. I filled the bike with 4 quarts. When I looked at the sight glass, it was entirely covered. So I went to check my manual. The short of it is its 3.4 Quarts NOT 4.4 quarts. Some Idiot my not be smart enough to realize and cause major damage, as that is the very point that you stressed just after your error. Maybe you can edit the video or something. Also, the skid plate does not need to be removed. Besides that, great job

@bluettr250

2 жыл бұрын

The oil goes into a tank not the sump. There is no damaging the engine from overfilling

Shouldn't you put oil on the gasket on the new oil filter before you install it? If you did, you didn't show/mention it. An old habit from doing oil changes on cars. I have never done an oil chang without rubbing some oil on the new gasket. Used oil works fine for this purpose. I also check to make sure the gasket from the old oil filter didn't stay with the motor. It happens some times. Its easy to see on the Tenere. Never had a leak from the filter.That may be why the automotive filter had a slow leak. Just a thought.

@AdventuresWithMe00

6 жыл бұрын

thanks Christopher. I forgot to mention that I do always put used oil on the gasket of the new filter. Trick I learned 30+ years ago. I guess it's so ingrained that I didn't think to mention it. I do also check to see that that old gasket came off the oil filter too. (had that problem once too) Thanks for mentioning those tips!

@shhhnp1452

2 жыл бұрын

All of the Yamaha filters I’ve purchased have been pre-lubricated. Been that way for years.

I never change the copper washer! I've kept the same washer on my Yamaha XT250 dual-sport bike through 5 or 6 oil changes over 2 years and never had a leak. However, I wiggle the washer around as I tighten the drain bolt so it drops into the same depression made from a previous crushing.

@AdventuresWithMe00

2 жыл бұрын

I do the same thing. I have a Scion car that I've changed the oil dozens of times over the year. I just flip the washer when I re-install the drain plug and it's been fine.

Thanks for sharing. I just did my first 600 mile oil change on my new ‘16. Let us know if your decision to stick with the Yamaha OEM oil filter addresses the slow leak issue you shared in a previous video. Well done & thank you.

@AdventuresWithMe00

6 жыл бұрын

Hi Stephen, actually it has addressed the leak. No leak now, more than a week later. I'm not sure if the Bosch automotive filter got hit by a rock and leaked, or what? The Bosch filter sticks out further and is closer to the tire. I did keep the Bosch filter tight and rechecked it. I'm still not 100% sure why it leaked, but the leak is gone.

If you look at my channel I have an old XT600 1986 TENERE version of this motorcycle. I have to say that these bikes are very dependable and I bought it when I was 16. Now I'm 23 and looking forward getting XT1200 and stay loyal to Yamaha, love your chnnel by the way!! :)

@AdventuresWithMe00

6 жыл бұрын

I like your bike, sounds awesome! I think I am becoming a Yamaha customer for life myself. Good luck getting the XT1200!

Fram 7317 works great,

I was wondering what people’s thoughts were with the oil drain plugs on a angle? Was it designed to be drained on the side stand? I have only ever drained oil on a motorcycle with it perpendicular to the ground! On a center stand or with a wheel clamped in a lift.

What kind of dry sump is that, if it pours oil out of it? :)

You said your last bike had 110,000 miles using shell rotela oil im sold wow thats a great testament!

@AdventuresWithMe00

Жыл бұрын

Yes, that’s what I’ve been using since 2003 and about 200,000 miles on various bikes.

Thank you!

@AdventuresWithMe00

6 жыл бұрын

Thanks for watching!

Where do you get your rotella T oil>. I have used the Fram Oil filter for years and they have worked well. They are reasonably priced too.

@AdventuresWithMe00

6 жыл бұрын

I usually just get it from AutoZone or Walmart or Target. I used to use Fram filters until about 10 years ago. I read some reviews that said they weren't as well made so I use primarily Mobil-1 or Bosch filters.

Great video. Was 2014 the first year the Super Tenere came out with cruise control?

@AdventuresWithMe00

6 жыл бұрын

yes, it was. That's the first year of the mild redesign.

Thanks for the video I did 10K Miles on my 2016 ST and noticed that it never remind me to change the oil / service like my previous BMW... I check the Maintenance menu and I never reset it to "0" but I'm guessing if I don't enter into that menu will never remind me to service it :(

@AdventuresWithMe00

6 жыл бұрын

Does the Tenere remind you to service it? I didn't realize the menu could do that.

Easy job did mine The other day 3.5quarts no oil in level glass not sure why

Why take the skid plate off? on a stock S10 filter comes off and goes on w/o a problem...

@AdventuresWithMe00

4 жыл бұрын

won't the skid plate trap the oil coming out of the filter and make a mess? The skid plate only has a few nuts so it's easy enough to access.

Shell Rotella 15w-40 oil? Does it have wet clutch additve?

@AdventuresWithMe00

2 жыл бұрын

I just use the standard 15W-40 Rotella T.

Keith, I just recently bought a 2012 XT1200. While riding I noticed that the speed reading on the GPS and the Speedo do not match. I have determined that the speedo Is off about 4-6MPH. Is there a way for me to recalibrate, or is that a dealer task? Thoughts?

@AdventuresWithMe00

4 жыл бұрын

I have seen electronic devices that plug into the bike that change the speedo calibration. I believe you have to program the machine to tell it what percentage you want the speedo to be modified. I've seen them with Yamaha WR vendors. My 2015 Tenere is only about 1-2 mph off, it's the closest one I've ever seen. Other bikes I've had have been off by 10%. I just keep a mental note of what the real speed is, but getting a calibrator would be a perfect fix. I don't have the names of any products, just that I've seen them.

@leegraves101

3 жыл бұрын

The item you refer to is called SpeedoHealer. I put one on my Tenere and it works great.

Keith, how much oil you need, or do you check it only from the "oilwindow"? Tommy, munich/GERMANY

@AdventuresWithMe00

5 жыл бұрын

greetings to Munich, thanks for the comment. The owners manual says 3.4 liters of oil if you are also changing the oil filter. When I change the oil I add a little at a time and then just enough to get close to the top of the line in the window. It's very easy to overfill.

@tommybarbarossa

5 жыл бұрын

Thank you, Keith, I bought me one (Tenere) three days before,I get it in one month, 2013,12000km. Tommy

Don't you oil the filter gasket and fill the filter with oil before installing??

@AdventuresWithMe00

6 жыл бұрын

yes I do. I didn't show that part because I just figured it's one of those things people know from changing oil on a car. It's always a good practice. Thanks for the comment.

Thanks for sharing. It was a good job.

@AdventuresWithMe00

6 жыл бұрын

Thanks Fabio!

I've heard it said many times that the Super Tenere is low maintenance; however, the US owner's manual specifies a 4000-mile interval for oil changes, among other things. That's too frequent for me to call low maintenance. I know it can go longer than that because Australian owners are given a 6000-mile interval. What interval have you settled on?

@AdventuresWithMe00

6 жыл бұрын

I agree with you Mark. I think the manufacturer's are too conservative when it comes to maintenance intervals. I go 5,000 miles between oil changes, unless the bike sits a lot and then I'll do it once a season.

@pdrhound

Жыл бұрын

My '12 would need 1/2 a quart at 4000 miles so I always just changed it. Just changed oil on the '14 at 3500 miles and it looked a little used. Riding 1500 miles this week so new oil seems like a good idea

I have 2012 Tener and I've been refuling at 130 miles but when I go to fill up I've noticed that I have 2 Gallons left. Do I need to to do something special to get to those 2 Gallons

@AdventuresWithMe00

6 жыл бұрын

Is your reserve light flashing? I find mine starts flashing pretty early. I can comfortably get 200 miles out of a tank though. I think I would just keep riding at least another 40 miles. Those 2 gallons aren't hidden...you can still ride without running out of gas.

@ShawnKitchen

6 жыл бұрын

"Do I need to to do something special to get to those 2 Gallons" Yes. Ride further.

@stephenevans596

5 жыл бұрын

I imagine that are all Super Tenere's are somewhat different but they shouldn't be by much. As an FYI I purchased a new 2018 in February of 2019 & I now have alittle over 2000 miles on it. My mpg has been anywhere from 46.7 to 49.2 but mostly in the 46/47 area. I filled up one time at 240 miles & took 5.1 gallons on a 6.1 tank so I'm extremely happy. My light will start flashing at around 180 miles but I know that I can get at least 250 if not more on a tank. I traded in a 2014 FJR on this bike & it was the same way as that light would come early also in fact on the FJR it started flashing when I had 1.5 gallons left on a 6.6 tank. I would be extremely surprised if you couldn't get 250 miles & still have a half of a gallon left.

Hey Keith I just want to clarify something there buddy, you’re saying to put in 4.4 quarts do you mean 3.59 as in 3.6 quarts or 3.4 L because if you have an extra quart to your engine you’re going to be in serious trouble

@AdventuresWithMe00

4 жыл бұрын

You're absolutely right George...I messed up. I always check the manual and it says 3.59 quarts with filter change. I'm not sure where the 4.4 came from.

Surprised there is nothing to protect the filter from damage. I’d want a engine guard that covered that, particularly since the guard has to come off for the change anyway.

@AdventuresWithMe00

2 жыл бұрын

I haven't had any issues with damage to the filter. Many Tenere riders put on a full skid plate, but I have kept the stock plastic one. I do a lot of gravel roads and have never had an issue with damage. It's easy to remove the stock skid plate...I image a full ADV skid plate would be a PITA to remove.

Did you put a full 4 quarts or 3.6 quarts?

@AdventuresWithMe00

6 жыл бұрын

I probably put the 3.6 quarts in. I would advise putting in a lesser amount than capacity and then adding until you get close to the fill line. You don't want to overfill it. I think that's what I did when I first did the oil change. I developed a leak in the oil filter, which was since cured.

@kretz206

5 жыл бұрын

You have to start the engine for a few seconds after you put in about 50% of all oil. It Will look like it is full, but when you start it up the pump Will move the oil to 2 :nd room. 2 drainpluggs! 🤓

You don't need to take front plastic skid plate off to change the oil

Upgrade the skid plate…please!

you dod not lube the gasket on filter with new oil ...

@AdventuresWithMe00

6 жыл бұрын

I did put some oil on the gasket of the new filter...I just didn't show it. I thought it was so elementary that everyone knew that. I should have included it though. You aren't the first to mention that.

@rusty2075

6 жыл бұрын

I know it is, just letting you know we did not see it !!! good video ....

@user-jr5ix2wm4e

6 жыл бұрын

Yes, 10-15 minutes is wetted filter paper.

Rick Moranis Changing the Oil on the Super Ten...lol.

@AdventuresWithMe00

5 жыл бұрын

I've never heard that one before...I've gotten Michael J. Fox

You really need to rock the bike to the right as far as you can and back to kickstand. Another cup will come out. Im surprised you didn't correct the video. The 4.4 quarts is all wrong.

it leaked because you didn't smear some oil on the 0 ring gasket on the filter, you just done it again too.no need to flip or change the crush washer either. and what in God's name is 4.4 quarts? what century are we in? (4.4 is metric anyway)

@AdventuresWithMe00

6 жыл бұрын

I did put oil on the gasket...I just didn't show it on the video.

Judging from the amount of oil drained, I would say that the drain bolt to the rear was to the oil pan.

Merci beaucoup

Funny thing in all youtube, thousands of video showing oil change, but those that show you how to check oil level? ZERO!!

@AdventuresWithMe00

3 жыл бұрын

ha ha, I wouldn't have ever thought to do a video on how to check the oil. Seems too elementary.

@Wolfox360

3 жыл бұрын

@@AdventuresWithMe00 Because it has a dry sump from what I understand, also my Tuono has similar and how you check the oil level is not the same way of other bike with the oil in the carter.

I use rotella oil in all my toys. never had a problem.

@AdventuresWithMe00

3 жыл бұрын

Lots of satisfied users of Rotella. Over 100,000 miles in my VFR and it was fine. I'm still using it now. The Tenere has about 27,000 miles on it. I don't mind taking the plastic skid plate off as it's only 4 exposed bolts and it would make the oil filter less messy.

Never pour car designed oil in motorcycle with wet clutch they say

@AdventuresWithMe00

2 жыл бұрын

I've used Rotella T for 185,000 miles in bikes and never had an issue, clutch or otherwise.

you dont need to take the engine cover off to change the filter

@AdventuresWithMe00

5 жыл бұрын

won't it get oil draining into the skid plate and dripping onto the ground?