The next time you change the spark plugs or check the coils, you can easily access the screws on top of the coils from the front with a wrench. Give it a try...it was so much easier than using a swivel.

@Freedomachine

4 жыл бұрын

I'll try next time. Thank you very much!

Nice video! I have removed the stock clamp on the hose under the air filter box and replaced it with an adjustable clamp. The type that is adjusted with a screw on the side.

@Freedomachine

3 жыл бұрын

Thanks for watching🙂Also thanks for the advice. This is exactly what I did in my valve clearance video.

This is a really helpful and informative video. Nice and clear with detailed steps to measure the coils. Thank you for posting.

Thank you for these videos. I am learning alot from it.

Very good job, I am at the point of changing plugs on my Super Tenere and checking the coils.

Good day i do like the color of your super T and i have added your videos to my list well dun stay safe

Realy thank you شكرا

Nice quick video on how to do this

@Freedomachine

3 жыл бұрын

Thanks for watching 😊

complimenti video fatto benissimo e molto dettagliato

@Freedomachine

4 жыл бұрын

Grazie mille 😀

Thank you

Good information

Good stuff I just found some dampness in 1 of my plugs the other day water seems to be getting in I put an extra o ring on the coil stick and greased the top of them all so fingers crossed. The bike wasn't running 100% and had backfired once or twice.

@Freedomachine

4 жыл бұрын

If the coils didn't short circuit for too long your bike should be running fine now. Fingers crossed 😊

@derrickmurphy7729

4 жыл бұрын

@@Freedomachine yes went for a wee 10km ride last night to visit parents so 20 km and it was perfect. Wished I could have kept going😜😜 bloody lockdown

@Freedomachine

4 жыл бұрын

I know! I'm going to Tesco with the bike. Only way to survive 😀

Ótimo 👍

Muito bom!!!

Nice motorcycle.

Hi thanks for sharing. If i may have two comments 1. Would be wise to cover the throttle bodies while you mess around that area... 2. I saw that your Coils protective rubbers did stick to the engine cover not the coil. In another video of yours i saw you applied some HT silicon to the rubbers to prevent water leaking inside the coil / wells. So is that the effect of the silicon you put under the rubber covers ? Thanks P.S. The big plastic box you removed is called "Air Box" not "Air Filter" :-) Nice videos keep going !

@MarcoBelcastro

4 жыл бұрын

Hi thanks for the feedback. I honestly forgot to cover the throttle bodies as I'm new to filming things and when you have to focus on two things then this happens. My apologies. The rubber is sticking to the engine cover because of the silicone but you can get them off as well. If there is a better solution to the water problem please feel free to give suggestions. This is what most mechanics do. Apologies also for naming things wrong. I'm sure I did it many times in other videos too. I will work on this.

@oc_geek337

4 жыл бұрын

@@MarcoBelcastro Thanks Marco. Yes the HT silicon i've seen it is the common method of making the ports more sealed than stock. I was just wondering how sticky that would become in time but it seems as you say it can be removed easily. I have the S10 in my radar screen as next bike :-)

@MarcoBelcastro

4 жыл бұрын

I guess it depends on silicone. Get the 2014 model and you won't have to deal with non of it.

@oc_geek337

4 жыл бұрын

@@MarcoBelcastro Actually yes was looking at the 2nd edition 2014 on (and likely ZE). I Didn't know that the coils had changed (or improved seals) in that model. Thanks again

@MarcoBelcastro

4 жыл бұрын

@@oc_geek337 They modified the cylinder head. Old part was 23P111900100 new part is 2BS1119001. I did not check the actual coils but it appears that this has solved the problem.

Hey, is it possible to get any of those Freedomachine stickers?

@Freedomachine

4 жыл бұрын

Absolutely! Contact me here with your address and I'll ship you some www.freedomachine.com/contact.html

Hi my coils are reading 1.4 on primary test is this within spec

@Freedomachine

2 жыл бұрын

Yes within spec. Thanks for watching ☺️

@tonysmith3219

2 жыл бұрын

@@Freedomachine thanks mate, just trying to get to the bottom of a misfire at low revs.

@Freedomachine

2 жыл бұрын

Change spark plugs and make sure all is perfectly dry.

@guillermoorozco.1834

Жыл бұрын

In the manual say primary 1.19 and 1.61. you measure 1.9 aré out of parámetro?

@Freedomachine

Жыл бұрын

No because I measure the multimeter lead resistance and it's not zero so I assume that I'm within specifications. I explain this in the video.