*TO ALL THOSE WONDERING ABOUT THE MISSING DISPLAY ELEMENTS AFTER THE MOD* This isn't really avoidable unfortunately. Because this module (or more specifically the LCD in this watch) isn't built with a mind to having a timer function operational, there's no need for the LCD to have any form of purpose-designed indication for the auto-repeat for the timer. So what Casio have done is repurpose that 'pin' of the LCD's data connection to use as the always-on elements of the screen like the dividers and the SNZ ALM SIG, and make it always on, so those elements are always visible. Having things like this be built into the LCD itself is cheaper than doing it any other way so it's understandable why Casio went this route for this watch. If you enable the timer, those segments disappear, and the reason they reappear later on in the video (when he is adjusting the setting of the timer) is because they're now effectively back to being the job of the indicator for auto-repeat on the timer. If you go into the timer's adjustment mode and press the light button (which would toggle the auto repeat), presto all the missing display elements appear. But only while you're in timer mode. And only if you have auto-repeat enabled. On a watch that's supposed to have the timer, that pin would work an indicator on-screen that would tell you, while in the timer mode, that auto repeat is on. All the fixed display elements would probably either be printed onto the watch crystal, or be fixed in place some other way, like be an actual plastic divider, like on the Casio Royale for example. It doesn't bother me especially I must admit, but at least we know why now.

@marcusjoe436

Жыл бұрын

That explains a lot! Thank you!

I noticed that the seperating lines disappeared as well.

Just done this on a W-800H and it works a treat. On that watch the lines are built into the screen plastics so you don't lose any lines etc - also, if you press light whilst setting your countdown it will enable auto restart of the count!

You are a life saver. I used another tutorial to disassemble and do the mod. The tiny spring rolled out and I had no idea where it came from until I found your vid. Cheers.

@ChromeFreeDisco

3 жыл бұрын

Glad it helped, it's at 4:50 for anyone else needing to know where the spring goes back.

Can confirm works on the w-800h :) Thanks for the vid!

@deanagoes2791

4 жыл бұрын

Sure.

@Rasec_Odraude82

4 жыл бұрын

Lo compre en Amazon y justo al recibirlo me atreví a hacer la modificación y funcionó!! Modulo 3240. Casio w800h

@cameron02

3 жыл бұрын

@@Rasec_Odraude82 n

Wow! Just got my W800H today and I tried this. It works, and now I have a useful countdown timer! SWEET!

Another nice feature for this module-current time display in all modes!

Did this With my 3240 W-800H, used a soldering iron with Copper soke up thread. Worked for me. Thanks man.

@4:45 The tricky bit, is to put the spring back OOOOPS.... That was hilarious!

I just got the W800H-1B Black on Black w Inverted display + I achieved the Countdown Timer Mod. Excellent Product!

Thanks! Worked a treat. Just a touch of a soldering iron was enough to undo the solder/bridge/resistor.

Just completed it and countdown timer working :) That spring was fiddly , but worth it.

After you did this hack I noticed that the SNZ,ALM,SIG is missing in the upper right of the display. The dividing lines are also missing.

Thank you for the post, the solder jumper removed and an useful function is activated. Casio uses a module on different models, this is helpful and informative video.

@jhford1

4 жыл бұрын

Can you explain in detail how you scraped the solder joint and which joint you scraped on the W96H? Thanks

It help me a lot, thanks

Thank you so much!!

Beauty! It works. I've got timer and split stopwatch. So Casio can use the same module and sell a couple watch models at different prices simply by adding or removing functions??!! Thats low,bro.

@jfan4reva

2 жыл бұрын

That's how intel accidently invented PCs. They built a single calculator chip that could be set up to provide different sets of functions for different calculators. Some electronics engineers/hobbyists got hold of it and discovered they could make it into a tiny cpu.

Thank you very much sir

@Travis. I replied to your email but it bounced back -no reply. I attached an image of the MB where I scratched the solder joint immediately after I received the watch from Amazon, and I also scratched some more. Still no timer. I've still like to send you the image. BTW & FYI, I added a second keeper and it keeps the strap flat.

I previously performed this hack on my W800-H. I followed the video instructions but I didn't get the timer on my new W96H. Why?

I did the same with my W800 but I lost the spring. There was no beep sound or any sound. These springs are not available everywhere. I got an idea of using a tiny metal wire bit inside the hole where there the spring used to be and it worked. Yeeeaahhh.

I knew I should have picked up a W800 while I was at Walmart. I was there, literally under an hour ago, and they had a few with assorted case/band color combinations. I picked one up, looked it over, out it back, picked it up, put it down, a few times before I put it back and walked away from it. OOOOF!

OOOKAYYYY So it HAS the function but it's factory blocked! Thanks, Mr. Chrome.

Но есть старые модели, в моих этот пин был справа, замыкал ноги схемы между собой, а не на минус. Отпаял его, потому что он был один, а другие два - рядом. Но и сама конфигурация платы другая на вид. Маркировка моей схемы Mak2b04503, модель 3092. И да, кто будет туда лезть - одевайте медецинские перчатки и переворачивайте внутренней стороной экран на чистую, не пыльную поверхность. А то придется убирать пылинки изнутри стекла - сделать это ой как не просто. Жирные разводы с самого дисплея (если работали без перчаток) легко убираются дистиллированной водой и чистой салфеткой.

Nice to know!

In a Timer mode push "Light" button. Does activate "Auto Repeit" or not ?

Same as w800h, timer can't be set for seconds is issue for abit me as i use it for gym, still looks epic with new 5600w band and negative display mod.

@guandasin3099

4 жыл бұрын

You've given the w800h a negative display? Mind if I take a look? Plan on giving the w800h a negative display

if you also solder the third jumper from the lowest where there are those 5 jumpers in a line you will enable the 5 alarms mode. (but only the first one will have a snooze function). I also have put the little spring with the large side inside the watch before closing the movement/module and it doesn't get lost that way. Follow this link for more info, the 5alarms mod is on page 2 www.watchuseek.com/threads/hidden-function-in-my-casio-w800h-module-what-the-heck-can-i-turn-it-on.650650/

@Tyrwot

3 жыл бұрын

Awesome!

I did do all the steps but it still shows stop watch and no countdown timer

Thanks for mentioning that little spring. I followed instructions for this mod on another video that did not mention it at all. I realized that I had this little spring on my desk that I had no idea where it went in the watch. Thanks to this vid I knew where to put it back. Fun fact: without this spring the piezo chimer does not work.

@sped6954

3 жыл бұрын

Yep, weird how that little spring can completely mute a watch. It's also weird given how small electronic components keep getting on a seemingly daily basis, that they don't just find a way to incorporate the ground somewhere else like actually on the PCB, and get rid of that spring altogether.

It possible also enable 5 alarms and disable Dual time. But not marks for Alarm enable 2-4.

@83nuvola

2 жыл бұрын

How would I do that? That would be great!

Hello! SNZ and ALM and SIG ?

It workss on 3240 module? 🤔

Hi, I have a question about the lines on screen. I also did the same as you did in the video and also saw the grid lines disappeared. But in you video at 6:07, the grid lines come up again! How? What did you do to have them on again? Really appreciate it if you can tell how to do it.

@ShokaLion

2 жыл бұрын

The lines are now the indicator for auto repeat on the timer - while setting the timer he enabled auto repeat which is why they returned. I put a bigger parent explaining this in more detail.

Instead of doing the mod wouldn’t it be easier just to use the alarm by setting it to a time that you would count down to (but obviously forward in the alarm time)? Maybe that works for me because I rarely use the countdown timer.

@analogmatrix1442

3 жыл бұрын

@Douglas Pantera it’s so simple that I don’t even need it. I see it all the time where no matter how good a watch is consumers always find something to nit pick. People should apply that attitude to themselves to do better.

@Little.deficas

Жыл бұрын

@Nelle Hgit yeah count down timer is more simple than rather setting alarm as a timer

do you know if this works for the F-91W-1YEF ?

@amoledzeppelin

3 жыл бұрын

It shouldn't. Module 593 was designed before the era of jumper hacks to make different model production cheaper.

Hmm, so the downside of this mod is that the Timer is always on "Auto-Repeat" as I've noticed ? (maybe the other solder blobs/pads have anything to do with that setting.. )

@TheGoodfella2012

2 жыл бұрын

Any answer? Timer will default to auto repeat?

@ShokaLion

2 жыл бұрын

No, auto repeat is selectable, but the auto repeat indicator is now those 'missing' display elements - the lines and the SNZ/ALM/SIG markings.

@Costinmusca

2 жыл бұрын

@@ShokaLion Thx 👍

Sir my watch light is not working how to repair my watch light please Tell me my watch same watch

4:55 can you buy those springs? I want to put new life in some old casio's Thanx.

@Tintoycar

3 жыл бұрын

@Douglas Pantera I have a box of springbars :) Thanx

And if you find and solder the necessary jumper in AQ-160, you get moon calendar instead of the world time. Old stuff, you know.

@Little.deficas

Жыл бұрын

wow

How about 3224 module from W 218? I need a countdown timer function.

@sped6954

3 жыл бұрын

I don't know if it works like this on all Casios, but my experience with their three pusher modules don't support the CDT function. Again, I don't know if it's like that across their entire product lines, but the ones I've had, I could never figure out how to get it to work, if it was even there at all.

@bachtrantrung9902

3 жыл бұрын

@@sped6954 thank you

Hi, I bought a second hand W-96H that was already hacked. Is it possible to get back SNZ, ALM & SIG indicator on every screen?

@glitchedoom

4 жыл бұрын

You'd have to resolder the point that was scraped off, removing the timer again as well.

@SkibidiWaPaPaPaPa

3 жыл бұрын

This also happened to my watch.

Last comment. I tried again by wiking the solder joint with my soldering iron. Still no timer.

@BengaliJoddhaAquib

4 жыл бұрын

@@mochabear1097 it did work for me.. had to be very patient and positive.. but the separation lines vanished.. see the transition @6:05

@gabrielcornea9119

3 жыл бұрын

there might still be contact there, that's why there is no timer yet. You have to make sure there is no more solder between the two plates

@sped6954

3 жыл бұрын

That's what I was thinking. Probably just didn't scrape all the way through the bridge.

Does this work with A158W /B650/AE1000?

@gabrielcornea9119

3 жыл бұрын

unfortunately not for A158w nor for B650, but it does also work for w800h. If you have a w202 or a DW5600 or an AE1000 then it's already enabled from the factory

Why Casio blocks this timer feature? Is there any sensible reason for it??

@rmn4348

4 жыл бұрын

i think they recycle some modules from more expensive, already existing g shocks for these cheaper watches, and if they unlocked it, there wouldnt be a reason to buy the more expensive g shock rather that a cheaper w800 for example except if you like the design or the shock resistance

@Crazytesseract

4 жыл бұрын

Some people only want a timer, not shock resistance or other features. If they provide a timer in cheap watches, many people may prefer not to buy the higher end versions. That will affect their sales.

@b2f2

3 жыл бұрын

I remember hearing that terrorists would use the timer function of these cheap watches for their bombs. Casio disabled the timer function on the cheaper watches to combat this.

@SuawoMan

3 жыл бұрын

@@b2f2 that's a theory!!! :D

@eriksvensson2098

3 жыл бұрын

@@b2f2 lmao

Can you please explain Why would the company deliberately remove a feature?

@Myaccisbanned

3 жыл бұрын

All I can figure is, Casio sees the Timer as a luxury feature and only want the timer for their more expensive watches so more people will buy them. I'm guessing using the same module for their budget and expensive lines is more cost effective.

what module is your watch? I think the current one is 3239. Will it work?

@kevyan76yt

4 жыл бұрын

I also realised that the lines were missing after you did the mod/hack.

@ChromeFreeDisco

4 жыл бұрын

Yes it is the 3239 in this video.

@deanagoes2791

4 жыл бұрын

@@kevyan76yt missing line not happening on w800h mod with 3239 modul on it

Really dont understand why the timer function is not activated from casio...

@electron7659

Жыл бұрын

Because of marketing. Because of money. Say a guy doesn't care about the style nor the color of a watch. All he cares about is functionality. Okay, then he has two options of watches to purchase. Let's just say for example that, Watch (A) costs $20 but doesn't have a timer. Watch (B) has a timer, but costs $30. The only difference between watch (A) and watch (B) is that one has a timer and the other one doesn't, which is the reason for the $10 dollar difference. Everything else is EXACTLY the same. Okay, the guy really wants a timer because he needs that function for whatever reason. He will end up spending the extra $10 for watch (B) just so he can have a timer on his watch. BAM! ! ! ! Casio just made an easy extra $10 bucks from watch (B) that cost them the exact same amount to make watch (A). Yes, $10 dollars is not much of a difference, which is why the customer would not really hesitate to buy watch (B) just to get the timer. But now, multiply that $10 by a million customers for example. How much extra profit did Casio just make just for disabling a simple feature that the watch already has to begin with? 🤷 That's why, it all just comes down to $$. A marketing strategy 🤔 This video was created to override that marketing strategy. You save those "$10" but you need to do some work. Not many people are willing to go through the hassle, so they'll just end up spending the extra "$10" and call it a day.

It worked perfect but the separation lines disappeared 😢 Please see the change 6:05 HOW??? Snooze, alarm, signal: all vanished

@BengaliJoddhaAquib

4 жыл бұрын

Sir, please help

@SergeiFrolovMuseum

3 жыл бұрын

Separation lines after modification has another function. Its display auto-repeat timer mode. In timer mode press light button while hours or minutes flashes (setting time)

@monstermonty1

3 жыл бұрын

Sergei Frolov Oh my god! Thank you so much for explaining that! I did the mod and it was driving me insane not knowing where the lines and alarm indicators had gone! In the video they had also disappeared when he puts the watch back together, but then suddenly they’re just there again but he doesn’t explain how!

@Sleestakistan

3 жыл бұрын

@@SergeiFrolovMuseum That brought the lines and words back only on the TR screen. Is there a way to get them to reappear on the time screen?

@SergeiFrolovMuseum

3 жыл бұрын

@@Sleestakistan Only by restore jumpers

this is great! thanks for sharing

Wow that’s amazing... why did casio cripple this watch? It’s better to have timer function from the beginning

@user-se5qr8zr8l

3 жыл бұрын

Because "marketing", that's why. Those modules haven't been changed/improved for decades. Those things literally cost nothing. So how are they going to sell 100 different models that are absolutely identical inside? - How about we remove the timer from this model shdsgf82767, Yamado-san? - Brilliant idea! And from this model 2765sgvjhgv3276 we remove the alarm! - You are so smart, Tanaka-san! Can I try this? Let's see ... How about we limit the stopwatch capacity to an arbitrary number of ... 45 minutes for no reason at all? The possibilities are infinite here! That's a Casio watch in a nutshell. An infinite list of cripples combo. E.g. I really wanted gshock 5600. But the functionality is just rificulous for the price. It has all buttons installed anyway. Doh.

@user-se5qr8zr8l

3 жыл бұрын

I've been looking for a slim, informative model for many days now. Each of them has something removed for no reason at all. And yes, I really sometimes need those CHEAP electronic functions like 24 stopwatch and a timer.

I am looking for a simple watch that would also give the possibility to set seconds in the timer mode (not only hours and minutes), can you help?

@waynewhitebeam1144

2 жыл бұрын

The Casio Royale or AE1200 allows you to set the seconds on the countdown timer, just checked mine...Easily the best bang for your buck simple and cheap digital watch money can buy..👌

Awesome. Wonder why casio does this....

@marduj2768

3 жыл бұрын

Money,money money

Why in the hell would Casio put a countdown timer function in a watch and then disable it?

@marduj2768

3 жыл бұрын

If you need countdown timer you must buy more expensive watch,that is why😁

The SNZ, ALM and SIG screen disappeared there.

@ChromeFreeDisco

4 жыл бұрын

Thanks for noticing, that shouldn't happen so I'll investigate.

@cacadelaputavaca

4 жыл бұрын

I made this mod to my W-96H two years ago and the same happened to me, but you can make them appear again, only if you are in the timer screen AND the timer is set to auto repeat. As soon as I go back to timekeeping screen, snz alm and sig texts disappear but alarm and hourly signal are still working anyway.

@traviswalker8933

4 жыл бұрын

@@cacadelaputavaca people on watch forums have managed to do this mod without the text disappearing. But they had some problems with the timer.

@cacadelaputavaca

4 жыл бұрын

Travis Walker I have seen this mod working flawlessly on a W-800H, almost the same module as W-96H, and keeping text, but never saw this mod on a W-96H until I watched this video, except my own W-96H. Indeed I supposed I screwed up but this guy has the same issue with text, so I think the Casio W-800H module 3092 and the Casio W-96H module 3239 are not so identical after all. If there's a way to always keep text in a modded W-96H, that would be great news for me!

@traviswalker8933

4 жыл бұрын

@@cacadelaputavaca he also scraped some conformal coating and I believe another solder. He said its nothing to worry about but I think that caused the issue.

I did it but mine won't beep anymore

@ChromeFreeDisco

4 жыл бұрын

Did you put the spring back in - see @4:45

@yoshtendo5531

4 жыл бұрын

@@ChromeFreeDisco Yes

@ChromeFreeDisco

4 жыл бұрын

The other thing is to check the case back is on the right way up - see @5:10.

@yoshtendo5531

4 жыл бұрын

@@ChromeFreeDisco I did that too

@Crazytesseract

4 жыл бұрын

The spring is the connector to complete the beeper circuit. Also check if you have put it in the proper hole. And, make sure the beeper on the back plate is not damaged (scratched up). There is a very thin conductive coating on the beeper attached to the backplate, which can be damaged.