Carbon Fiber Infusion- Beginner How To
Roller Cutter: amzn.to/3LXGXmq
Non stick scissors: amzn.to/3CqzVUe
Beginner level vacuum pump: amzn.to/3e1e1gX
micro fiber towels: amzn.to/3E9LL6j
Gasket Scraper: amzn.to/3UT6cKK
3m Spray tac: amzn.to/3LXQie1
Spring clamps: amzn.to/3C2iI1T
Hose pinch plyers: amzn.to/3e1LGXV
Gryphon Wet Saw: amzn.to/3UN2u5o
Please note that these are affiliate links. So at no additional cost to you, I get a small commission if you use my links. Thanks!
Carbon Fiber Playlist: • Carbon Fiber and Compo...
To purchase parts or contact us: ajhartmanaero.com/
Facebook: / ajhartmanaero
Instagram: @ajhartmanaero
Recorded on GoPro 7 Black: amzn.to/2YW7B5N
Edited with Pinnacle Studio: amzn.to/30NWm11
Пікірлер: 166
I like all your videos but these "how to" are on top. I do some simple carbon car parts as hobby and your tutorials boosted my confidence. Just released my 2nd product using vacuum bag. Thank you. 👍
@ajhartmanaero
Жыл бұрын
Nice! Glad they helped.
Enjoying all your how-to playlist, but especially THIS one! So much additional instruction here, very valuable. Little details like flange size, types of peel ply, keeping the mold release away from the outer edge, and much more. The other demos are interesting, but lacking this level of instruction. I hope you include a discussion on types of core materials, thickness, when to use, etc. Thanks for sharing your knowledce!
Thanks for all the helpful info!
overall the amount of information is digestible and useful. thanks for all the insight into your process.
Great vid as usual
Thank you for an awesome video!
Thank you for the video!
Love the informative play by play - excellent job.
Awesome work sir.
Great video.
Thank you so much for your helpful videos! I am working on building a carbon fiber harp, and your tutorials have helped me so much. Your generocity is appreciated 😊🙏🏾
Loved this one AJ! All of the in process tips are really helpful and don't usually get included in summary type how-to videos. Keep up the awesome work!
As always....very nice video from you... cheers....
Thank you for taking the time! Your videos are giving me confidence to take on carbon fiber projects!
Thank you for sharing your knowledge/these videos, such a huge help please keep them coming ❤
Just Awesome thanks for sharing and your time bro!
Great idea good job
You are an artist bro, great work
Another great video. Nice t shirt, NJ 👍.
Good job 👍
I love this so much,and I am very appreciate about that.
Great video! Learned a lot just from watching this video. Thank you!
Really great no time lapse can see everything great video 👍
Love these "how to" videos! Hope to see more. I learned working with some composites in the Air Force, certain planes used a lot of composites but mostly vacuum bagging sheetmetal with a honeycomb core or Kevlar(not a lot of mold/plug making). I'm really interested in how to switch my past knowledge to CF. Thanks for sharing! 👍
Thank you for sharing. I always wondered how this was done
Fantastic presentation of a lot of nuances that I expect are hard learned lessons. Thank you!
I definitely enjoyed the slower presentation as it allowed me to verify a couple details I was not entirely certain of from previous videos.
Thank you!
Awesome video Boss..!!!!!!🎉🎉🎉 These step by step motivates and gave confidence in how to do this….
Well DONE friend. Congratulations from South Africa...👏🏽🙏🏾❤️🇿🇦🚒
Thank you for this video, I have watched lots of videos and people rush thru the process. This one is perfect with you comments and explanations of what and why you are doing what you do. VERY Helpful. It is something that inspires me to give carbon a try for my car.
Learned so much from this channel over the last few months, great content! I made my first infused part over the weekend, and it came out well except for one issue, but watching this video solved it.😎 (Hanging the resin pot to remove air from the feed line)
Thank You.
Awesome video! Love your teaching style. All of the detailed information and tips were fantastic! Thanks for putting this together. I think it would be really cool to see something similar on a bigger more complex part. 🙂👍🏼
@ajhartmanaero
11 ай бұрын
I’ve been thinking about it. It will literally be almost the exact same thing, but just bigger. So not sure how valuable it would be.
brilliant! exactly what I needed. literally about to make my first infused part.
@ajhartmanaero
Жыл бұрын
Surprised you haven’t made one yet!
@RuskiWeldFab
Жыл бұрын
@@ajhartmanaero haha me too. just never had a need for it.
@ajhartmanaero
Жыл бұрын
@@RuskiWeldFab lookin forward to the video.
Thanks for sharing your process! I am gearing up to build glass and carbon rc glider wings, etc. Infusion may be a ways out for me, but it is nice to see how it works from beginning to end!
Amazing video as always! Could you post some on mold making?
@ajhartmanaero
Жыл бұрын
Yeah. Did one a little bit ago of my airbox lid. I plan to do some in the future but just gotta find the time. Molds are extemely time consuming.
Brilliant, I've made kiteboards using vacuum but not infusion Thanks for the share
those small video answer like 100 question i had. just like the small tack spray washable with acetone, look dumb but it have save a "scrape" parts yesterday to a ready to ship part ! thx man ! have a nice day !
Hey AJ, love the videos. I saw you use a clear coat on your molds in a lot of your other videos. Are you just using a 2k acrylic urethane, or does it have to be a clear gel coat? And are you waiting for full cure or scuffing it up before doing lay up?
Awesome. Learned so much from this one video. Where do you get your carbon fiber? I notice yours is a lot thicker with each layer compared to the ones I have
Wow it’s fire
This is cool.
Love the content man! Idk if anyone else has asked but where are you getting your fiber weaves from?
I use the scissors in my shop and they work very well. I got a lot of my ideas for my shop from you suggestions I figure if it works try it and then tweak it to my liking thanks for all you help.
Many thanks for sharing. Could you please show us the clear coat spray you use on the moulds. Is it epoxy clear or something else. Cheers mate.
Thanks for this. What vacuum pressure did you use? Thanks again.
ALL THIS AND MORE ON THE NEXT!!!!!!
@deestersvega807
Жыл бұрын
🤦🏿♂️💬FUCK!!!!!
Hi , your work is luxurious . I would like to start and try it too , can I ask what weight of carbon fibre you use ? Thank you
Great! 👌 By the way: is this vacuum-technique feasible for making carbon-epoxy layers on wood?
Love the videos, only thing I'm questioning for clarity is the oven. Why bake the parts?
Love your videos! For your other composite videos, you mentioned how much epoxy mixture to use with respect to weight of fabric. For this infusion process, how did you calculate the amount of resin? Thanks!
Hey AJ, the oven, is that homemade? Also is the purpose for it to shorten cure time as to letting a part cure in ambient temperature? Thanks!
super 👍
Mantap , itu anti lengket moulding merk apa ya?
I could really use your help with a sunsheild video. I just had a disaster and had to wipe it all out of my first mold. The surface tension would not hold a consistent film. I followed all the instructions from duratec. How are you doing it? What product are you using for a clear topcoat?
This was great, thanks! Two questions: How much vacuum do you use, and how hot is your oven? Thanks again!
@ajhartmanaero
Жыл бұрын
Full vac and depends on epoxy specifications.
I’m curious about after you used the vacuum, did you turn it off before you applied resin infusion?
Do you ever use clear gel coat in the mold before layup?
Seeing how you do things is really interesting, coming from an automotive background and using prepreg as opposed to how you do it with infusion is what interests me the most! Where did you gain your experience or are you self taught? Also, what is the reason for infusion over prepreg?
@ajhartmanaero
Жыл бұрын
Self taught. Wouldn’t use prepreg enough to justify the costs plus I don’t have an oven to get hot enough.
any idea when fox parts might come out on the store? really looking forward to those! keep this stuff up bro
@ajhartmanaero
Жыл бұрын
Honestly. Probably never. No market to recoup costs unfortunately and I don't have a fox to make parts for fun.
@leakermcsqueaker7942
Жыл бұрын
There big in the drag racing scene. Carbon fox parts would make a killer fortune there!
@edbertouille4983
Жыл бұрын
@@ajhartmanaero all good, would there be a chance I could contact you and you could make a set if I sent over some parts for molds and stuff?
@ajhartmanaero
Жыл бұрын
@@edbertouille4983 just a heads up that molds are extremely time consuming to make. So if you want a part bad enough, shoot me an email.
How did you resurface your mold spray and then sand gellcoat?
GJ man, would be nice to see how u making hood in real time)
@ajhartmanaero
Жыл бұрын
I did a hood video but real time would be like a 4 hour video.
@JDM_L3g3nd
Жыл бұрын
Just a thought since I know you did a good video already and it was great, but what if you did a "real" time one and just cut out a lot of the repetitive stuff, like show laying up the carbon, but do one layer, then cut out the rest, show laying up one side of the gum tape, but cut out the rest, it might be helpful to do that way, and not a four hour video? Either way, love your content, it has helped me a ton with my own composite work, just seeing someone in an actual shop doing the work, not a giant production company with unlimited budget.
nice video!! do U recommend breather cloth on this infused parts?
@ajhartmanaero
Жыл бұрын
I would advise against using breather cloth on infusions.
hello friend I always follow you, can you give me some advice to eliminate pin flowers on the surface? I'm going crazy 🤷
Congratulations for the tutorial, I wanted to ask you if the vacuum pump must suck until it catalyzes the resin or as soon as it reaches the gel point it must detach, isn't there a risk that it sucks in too much resin?
@mckenziekeith7434
11 ай бұрын
There are two separate issues. ONE: you need to stop the infusion when the part is fully infused. You don't want to suck resin into your resin trap or vacuum pump. That is why he clamped off the resin input line. That stops resin from flowing. TWO: you need to keep the part under vacuum until the resin cures. If there are no leaks, you can clamp off the vacuum line and turn off the vacuum pump, and the part will stay under vacuum. If there are leaks, in infusion, that can be a big problem because air will get sucked in through the leaks and may cause bubbles in the resin. The air will also release the vacuum pressure which is needed to make a strong part.
How cool! How large of a part can you use the infused technique?
@ajhartmanaero
Жыл бұрын
Very very large.
@adampatterson9404
Жыл бұрын
@@ajhartmanaero Ha, thank you for the reply. I've been binge-watching your videos today. All very cool to learn. Thank you for sharing.
Hey Aj. Got another question. What bagging film are you using? I am expirementing with various types and curious what you are using here? I have tried Airtech WL5400 and recenetly Stretchlon 200. Had wonderful results with the stretchlon in terms of it taking shape around my mold, but felt it was a little annoying to bag due to how soft and flimy it is. Thanks as always sir!
@ajhartmanaero
Жыл бұрын
US Composites for my bagging film.
Can you make a video on how you make your molds?
@ajhartmanaero
Жыл бұрын
Search my videos. Did one several videos ago.
How do you decide when extra reinforcement is needed in particular areas, and when/where to use core material?
@ajhartmanaero
10 ай бұрын
Years of experience.
How do you make a mold for the carbon fiber. Also whats the difference between infusion and just putting eproxy & harderner with a brush and then layering it again until it solid. I dont know what its called but too me it look like just drying.
Hi, what an inspirative video..I like all your video. I just learn carbon fiber infusion from your video. I tried so many time but why I never have a clear finish like that? Mine is always looks muddy.
@ajhartmanaero
Жыл бұрын
Poor mold surface probably.
@don4tell0
Жыл бұрын
@@ajhartmanaero thank you for your help, I'll try to make a better mold tomorrow.
Do you make custom carbon fiber parts, I need an engine cover made. If I ship my engine cover to you would you be able to make a shell that goes over it or the whole thing?
The vacuum must be left on when the oven in on?
Sorry, Can you explain again how you determine the ratio again?
wondering how do you know ( calculate) of how much of the plastic (bag) will you need. and how do you measure amount of resin you need per cast. thank you!
@ajhartmanaero
10 ай бұрын
Measure your gum tape and weigh your carbon.
Should you get rid of the chunks of left overs before you apply the releasing agent?
@ajhartmanaero
Жыл бұрын
If it’s not part of the finished part there’s not much reason to but you can if you want to.
Hi! Thank you for the video. I have a question for you and as you seem the expert of Carbon Fiber. Do you think it’s realistic to do a full floor of carbon fiber? Would you recommend it? With a translucent epoxy on top? Where do you get your rolls of Carbon Fibers from your previous video?
@ajhartmanaero
Жыл бұрын
It’s worth a shot if you want. I get my carbon from sollercompositesllc.com/
can you make side fairing pieces for 2011 hayabusa? I could send the fairings to make the mold
How clean the mold after infusion proses???
Pizza cutter n rubber mat got it.
I´ve watched a bunch of these videos on how to work with carbon fiber and epoxy and none seems to address how to protect themselves. I´ve read some about it that you should have extremely good protection and ventilation when handling epoxy and when your sanding and cut the parts. Is a h-vac and good protection mask enough? How bad is this really? The reason for me asking is that I have never handled this sort of stuff and I´m going to reinforce a guitar neck.
@ajhartmanaero
Жыл бұрын
Definitely protect your lungs with a respirator. Some people get much itchier than others. It’s similar to fiberglass but I’m not worried about it on my skin but you can always go above and beyond on ppe.
For the first time, I bought carbon fiber fabric and epoxy resin. Can I make the spoiler of my car carbon fiber? Please, someone who knows, tell me the simple steps of the work. I have seen a video on KZread. Where should I do it? How many times and how many layers should I apply epoxy after gluing the carbon fiber? And my spoiler has color, do I have to remove the color completely or is it enough to sand it so that scratches are created? Thank you for your help
Where do you buy your materials, carbon fibre etc. Thanks
@ajhartmanaero
Жыл бұрын
Carbon I pretty much always get from Sollarcomposites.com. Everything else whoever has what I need at the best price haha.
Aj did you find the CompositeEvisions resin better for small parts vs the USComposites? Or just a matter of what is available in front of you?
@ajhartmanaero
Жыл бұрын
I got the CE infusion epoxy and the US composites is for Vac bagging stuff as it’s a thicker viscosity. So can’t do a direct comparison.
@RedStarCG
Жыл бұрын
@@ajhartmanaero Ohh! My mistake. I watched so many of your videos got the resins confused for which process. Thank you for sharing all your knoledge Aj!
Just watched a guy make a hood out of carbon Kevlar & carbon fiber with nothing else. No mold no peel ply or net. He only vacuum bagged to fuse the reinforcement part to the shell
Is there a video of making a mold? Or did I miss the video
@ajhartmanaero
5 ай бұрын
Did one a bit ago.
Did you have to cure it in an oven or just leave it at room temperature?
@ajhartmanaero
11 ай бұрын
You can do either.
Hey, nice video! Not sure if you eventually figured it out, but your mixing ratio is way off. Since this resin kit is 3:1, you divide part A (resin) by 3.65 which in your case should have been 20.87g of hardener.
@ajhartmanaero
Жыл бұрын
What numbers did I use? Edit: went back to make sure I didn’t mess up. So your case works but you have to remember to zero the scale. My way of x1.27 allows me to just pour up to a total. If you want to get super technical it should be x1.2739 which would account for the .3 of a gram which I doubt you could hit that exact anyway, and is still well within the margin of mix ratio error. So no, my ratio is not way off. Just a different way to do it. This stems from my other infusion epoxy that I use 95% of the time that is a 100:30 ratio.
@TheShaddix
Жыл бұрын
@@ajhartmanaero Oh, I didn't realize you didn't zero the scale. In that case it's all good. It was just confusing how you explained it that's all. If your part B were 20.87g in total after the scale read zero, then that's the correct weight for the hardener. However you arrive at that is your method but it is more confusing than what the bottle says.
@ajhartmanaero
Жыл бұрын
@@TheShaddix Yeah if I exclusively used this epoxy your way makes sense. For congruence of process with my other epoxies I do the math as shown. You end up at the same point.
@TheShaddix
Жыл бұрын
@@ajhartmanaero That's all that matters!
No in mold coating ? Any options in mold coating brands ?
@ajhartmanaero
Жыл бұрын
Not this one.
@calico88
Жыл бұрын
@@ajhartmanaero when you must using it ? What brand’s you know in the market ?
Can you infuse with out an oven for post cure?
@ajhartmanaero
2 ай бұрын
yes
@lmSteveo
2 ай бұрын
@@ajhartmanaero if I don’t need to post heat in the oven when infusing, what’s the difference with infusion vs bagging? Pros and cons with both?
How are some people avoiding the air bubbles with out using this vacuum method? I see so many just brushing the resin on and letting it sit in open air.
@adematthewsracing
7 ай бұрын
It isn't really about avoiding air bubbles it's about getting the resin all the way through the material and getting consolidation through the layers. With wet layup you end up using more resin and more weight with more risk of dry patches.
Do you use a cnc machine to make your molds?
@ajhartmanaero
2 ай бұрын
We have not yet but just brought a cnc in house so we may on future parts.
@akeemgriffiths4459
2 ай бұрын
@ajhartmanaero I just saw a video of you making a battery bracket, I'm new to your channel so I'm watching both old and current stuff. So yeah look out for my comments.
What kind of vacum pump are you using
@ajhartmanaero
Жыл бұрын
I'm usings a JB Industries 200N but thats like a $700 pump. In the video description I put a link to a pump that would be fine as a starter pump and smaller parts.
@Team-cn2mu
Жыл бұрын
@@ajhartmanaero thanx
where abouts are you located ? i want to hire you to build me a custom project im working on.
How come in your older video, when you did the infusion, the carbon came out flimsy and this time it came out hard? Is it because you used 3k carbon before?
@ajhartmanaero
Жыл бұрын
What?
@trapgodnah9022
Жыл бұрын
@@ajhartmanaero my apologies, it was the vacuum bagging for beginners video, the carbon panel was flimsy
@ajhartmanaero
Жыл бұрын
@@trapgodnah9022 yeah. That was a thin part and large area. This is a thicker, smaller part with shape.
@trapgodnah9022
Жыл бұрын
@@ajhartmanaero what would be a effective way to make a large panel like that stiff, more carbon?
@trapgodnah9022
Жыл бұрын
@@ajhartmanaero how do you make mounting points? For pieces like doors and fenders
what temp is the oven?
@ajhartmanaero
Жыл бұрын
135F
Yeah now I just need a mould
🤔💬two layers….
Aj. Can I have you build me a hood? 67 chevy c10. Cf.
@ajhartmanaero
Жыл бұрын
If I had a team, maybe. But as a one man shop, I don’t have capacity for a project like that. Sorry.