I’ve in the car audio specifically basshead side for almost 38 yrs in all of my rides and that was a really good basic explanation and informative. Nice job.

GOOD content. Remember without that power you get no thump from the amp to the subs.

@BassAddict91

3 ай бұрын

Facts

That's me in this piece!!! Big big love man, especially since I'm getting back into audio on my car builds a little. I have a 350z with a hatch box, and it's setup for 2 12's. I wanted a little bump but not doing competition stuff, so I grabbed some HYankas after watching your review, and I picked up a Stinger 1000 watt since the two subs run 250 RMS a piece after watching Big D's review. I'll have to shoot you some pics once I get everything done!

Well said bro 👏

Also look for an amp with a high dampening factor the higher the dampening factor is The cleaner power you will have and it can play between one ohm and two ohm efficiently if you get an amp like a DD audio m2500 that has a 400 dampening factor you getting nothing but clean power The dampening factor of what determines what the amp can do just so you know bro keep doing what you doing Love your videos

@BassAddict91

3 ай бұрын

💪🏾💪🏾 noted bro

Bruh will doing my big 3 upgrade help with the dimming lights? I am going to add another battery

@normancore9522

3 ай бұрын

Big 3 , extra battery, high output alternator= knocking pictures off the wall lol !!

@Pittsburgh-412

3 ай бұрын

It will a little bit but I recommend upgrading to Led headlight bulbs. This worked great in my car

@BassAddict91

3 ай бұрын

I was just gonna say change your headlights to L.E.Ds they help my Lincoln and crown Vic a lot. But the big3 and another battery should help a lot bro and save up to get a alternator

@tarussmith37

3 ай бұрын

@BassAddict91 I appreciate bruh. I have went from a 120 amp alternator to a 250. I just have to upgrade my big 3 and 2nd battery

boy you explained my situation perfectly my dumbs ass gotta replaced my amp now due to the fact its the weakest link in my system

@BassAddict91

3 ай бұрын

A it be like that bro you’ll get it together for sure

I’m in the process of building the loudest build I’ve done yet. I have two fi audio mt12’s. I had one on two strapped skar rp4500’s doing nearly double rms. Seems to handle it fine. So I’m going to add the second so I’ll be doing almost 18k watts

@BassAddict91

3 ай бұрын

That’s gonna be sick bro

When you tell someone to do their own homework, you can't go wrong. There are so many ingredients, and everybody doesn't have the same taste. 👍🤞

@BassAddict91

3 ай бұрын

Facts bro that’s why I say that. Guys have to do research on what specific build they are looking for and go from there. It’s 2024 bro any information your looking for is literally right at your finger tips

@undernature2799

3 ай бұрын

@BassAddict91 agreed all up and down the board. Might fk around and learn something else at the same time

Subs 4k rms.. Amp 8900rms.. My custom box is undersized by 2 cubes tho. I can't imagine how it'll sound with the right size.

Big facts..

Getting an amp that's 1.5x to 2x bigger than needed will help combat voltage drop and box rise while still delivering the full power your speakers can handle, so you don't miss out on any performance. This is how I always do every system :D

@BassAddict91

3 ай бұрын

Facts

I'm trying to pick out a pair of subs now I just did a major overhaul on the system from the alternator double run of 0 gauge OFC to the back SMD all copper fuse blocks running to a brand new 29AH SCIB bank and a brand new Deafbonce AAK 6k now I need a pair of subs I can abuse I'm thinking about the slapz audio smackdown 15's any recommendations I'm new to anything more than the CXA 1800.1 I had before

and does your stock support then you want get 4k 2k after box rise. electrical battery zero gauge wire ofc I learned the expensive way electrical . and what bass additc said

Best to have one amplifier per subwoofer for maximum thumpinfication!! 💯💪

@BassAddict91

3 ай бұрын

True and I like the words thumpinfication 🤣🤣

@BrianWaller-qe7gr

3 ай бұрын

Or be like me two strapped amps per sub. My new build is going to be two fi audio mt12’s each will have two strapped skar rp4500’s

Good shit bro... Its a learning hobby for sure. You have to look at all details so you dont blow up your equipment. I blew subs and amps because i did it pushing them to the max

Looking for a god box for single avatar stu 12 please help

How do I connect 2 4ohm dvc subs that have direct leads to 1 ohm?

my $160 american bass elites can handle the full of my 5k ima see how it does at an 8k maybe pushing it a little but we will see.

Hey bro i have a question if i have a 4 chanel amp can i still adjust the eq setting on my headunit or will that cause clippin

@BassAddict91

3 ай бұрын

Yes you can bro and it won’t as long as you know at at what volume your headunit starts to clip at.

@Skipzz97

3 ай бұрын

@@BassAddict91 oh okay hell yea thanks bro for the reply 💯❗️

Man I need your help, I’m not getting any luck no where. Can a cheap audio converter cause my amp to go into protect mode? This the 3rd amp

@72SpinBaxk

3 ай бұрын

If you’re will to help I want to send a picture or video of my lil setup

@eighty3boxchevy

3 ай бұрын

Check the wiring from front to back bro. I had the same issue. For me, it was my grounds. Hope you find the problem. Bass on!

@BassAddict91

3 ай бұрын

If it’s going into protection when the bass drops it could be that the Ohm load is off or your ground needs to be changed to a better location

@rubenavila8012

3 ай бұрын

Running 1ohm on 2ohm amps is why 3 Amps are gone 😢, just get you a jp amp and send it

Lil bro i know you definitely from dat dirty south to "Yeen" meaning you ain't 😂.

@BassAddict91

3 ай бұрын

🤣🤣💪🏾

First 🔊🔊🔊

@BassAddict91

3 ай бұрын

💪🏾💪🏾

🫡💪🏼💯