Busted Knuckle Bronco Prerunner Interior Upgrades - Knucklehead Garage
Автокөліктер мен көлік құралдары
Well it has been a year since we did an update on the Busted Knuckle Bronco Prerunner Build. We took it out to King of the Hammers and beat on it with our friends at Desolate Motorsports. We quickly figured out that we had built one killer Ford Bronco Prerunner but the interior needed a lot of help. Well we got with PRP and put some of their awesome seats in it, mounted our custom KC lightbar and even installed a new center console from Tuffy. A few months later we were daily driving it pretty hard when the Ford 351 just started sputtering and lost all power. We worked for months trying to diagnose the issue with no answers. So now it's time to rip it out and make something happen. Maybe we can add some power to this beast of a Bronco!
#Prerunner #Bronco #Knucklehead
Parts installed in this video:
Tuff Console- amzn.to/2RrTuXj
PRP Seats- www.prpseats.com/
Desolate Console Kit- desolatemotorsports.com/shop/...
KC Cyclone Lights- amzn.to/2Qd28Iw
KC Pro 6- amzn.to/3taPHeY
Sector Seven FE mount- sectorseven.zone/product/quic...
Tuff Coat Bronco Top- amzn.to/3dN3vpi
Official Busted Knuckle Merch - www.bustedknucklegear.com
BKF Facebook - / bustedknucklefilms
INSTAGRAM / bustedknucklefilms
SNAPCHAT- / bustedknucklefilms
TikTok- / bustedknucklefilms
AMAZON PRIME- www.amazon.com/v/BustedKnuckl...
Buy Off Road Parts- www.bustedknuckleoffroad.com
Check out our New BKOR Shop Channel- / @bustedknuckleoffroad
Become a Member- / @bustedknucklevideo
Big Thanks to our sponsors
www.bustedknuckleoffroad.com
*SEND US FAN MAIL*
Busted Knuckle Off Road
5270 AL HWY 69 South
Cullman, AL 35057
United States of America
Пікірлер: 183
I live in California and watch EVERY video you post!!! Just want to say THANK YOU for all the awesome content!!!🙏👍🏻👊🏻🔥
@BustedKnuckleVideo
3 жыл бұрын
Awesome! Thank you!
@cottonhiker
3 жыл бұрын
@@BustedKnuckleVideo 🙏
Sweet console setup!
@BustedKnuckleVideo
3 жыл бұрын
Makes it look like a race truck for sure
Wow thats awesome
@BustedKnuckleVideo
2 жыл бұрын
be more awesome with a new engine in it and running! LOL
If you didn't figure this out yet, I had the same issue with mine FWIW. Just a prerunner project that only goes out once a year. After 2 years, I finally ruled it down to a TPS issue. I found the throttle body shaft blade for the throttle position was not clocked right. Even after drilling out the sensor mount holes on a new one, it was way off. First time I ever seen this issue. It ran great the first few years I took it out. Replaced the throttle body with another I had, checked and set TPS, and all is good. Awesome build, BTW
@BustedKnuckleVideo
2 жыл бұрын
Injectors were clogged
@diabeticdan1723
2 жыл бұрын
@@BustedKnuckleVideo wow. That's usually due to never having a filter changed and it broke. Or it sat forever with old fuel. I've had a few injectors go bad. Atleast it's an easy repair. Looking forward to the next video of it.
SWEET ,SWEET UNIT , you guys don't build , you create cool vehicles
@BustedKnuckleVideo
3 жыл бұрын
Thanks this has been a fun project. Now it just needs an LS
I love this
@BustedKnuckleVideo
3 жыл бұрын
it has been such a fun build
I've own an 89 and the stock top was textured from the factory. It looks fine a little more texture but still good
@BustedKnuckleVideo
Жыл бұрын
I think it turned out great. stuff is tough too! Hopefully we have a major update for this build soon!
Slick bronco. OJ Would proud 🤣
@BustedKnuckleVideo
3 жыл бұрын
He might could have gotten away in this one. Well if it was LS swapped maybe
Cool vids man i have an 88 and am doing a full modded restoration.
@BustedKnuckleVideo
2 жыл бұрын
Right on
@daviddrennan1759
Жыл бұрын
@@exaviermcnair7252 my motor is on hold cause we are having trouble getting heads. Dss is so far behind they couldn't quote me a price, brodex took the money and ran and afr too is delayed. Ran some of the tubing and cut most of the interior out.
So....keeping the factory speakers....👍...lol..Naahhh...Y'all doing one hell of a Job.😉
@BustedKnuckleVideo
3 жыл бұрын
Speakers? We will just listen to the LS
@byronsmith25
3 жыл бұрын
Yeah... I noticed that in the video. No plans as of yet to do anything with the stereo. May just do some race headsets from Rugged with Bluetooth for music!
@lastcovenant3472
3 жыл бұрын
@@byronsmith25 Sounds like a plan..
Probably the module on distributor or fire wall I have 3 kinda partial to them lol
@BustedKnuckleVideo
3 жыл бұрын
nope wound up being clogged injectors
Should try airless tires, I heard they were better for offroading because the way it can bend around rocks and stuff, I really want you to test them against normal stickies
@BustedKnuckleVideo
3 жыл бұрын
if a company sent us a set we would give them a try for sure!
Hey Byron loved the video. How did you make such beautiful straight perfect cuts in the new console for the speaker, radio, And accessories? Thanks.
@BustedKnuckleVideo
Жыл бұрын
Tape, a lot of measuring, and a dremel
Man I want to do the prp seats in my jkur front and back buckets
@BustedKnuckleVideo
3 жыл бұрын
You and me both!
What brand is the small amber light bar in the grill? I love this Bronco series you are filming!
@BustedKnuckleVideo
3 жыл бұрын
KC
Curious are y’all going to bring this project back I love it
@BustedKnuckleVideo
2 жыл бұрын
Yes it is currently getting a engine swap.
Great build! Are you going to use the stock rear interior panels or make custom ones? Good luck with the engine!
@BustedKnuckleVideo
2 жыл бұрын
just delete them
Dang clogged 2 one time we’re doing a blueprint and balance 408 in my 89 with the Holley Sniper kit fuel injection ignition and all now then on to suspension something I don’t know a ton about
@BustedKnuckleVideo
3 жыл бұрын
This one might just need an LS
hey for the 2 part primer did you get the gallon size or quart size. and same thing for the tuffcoat surface, what size can did you get for that as well. Im going to go that on my bronco.
@BustedKnuckleVideo
2 жыл бұрын
good question will have to look back
Godzilla!!
@BustedKnuckleVideo
3 жыл бұрын
7.3?
@agar4278
3 жыл бұрын
@@BustedKnuckleVideo Yes sir!! LS swap is like drinking Pepsi out of a Coke bottle!
Something you should check is cats I saw in the shop same issue the customer thought blown motor just something to check
@BustedKnuckleVideo
3 жыл бұрын
interesting
@byronsmith25
3 жыл бұрын
No cats
Y’all need to sell these light bar brackets for Broncos and f150
@BustedKnuckleVideo
3 жыл бұрын
$100 for the pair?
Will you guys ever put the light bar mounts on the market ? I see a lot of good feed back about them.
@BustedKnuckleVideo
Жыл бұрын
No these were just one off
So freaking sick! I have a 96 Bronco with the Solo Stage 4 kit and am looking at making a lot of the upgrades you did! My BIGGEST problem has been trying to find light mounts for the 57" gravity light bar. Your link was for the 50" but I counted 9 lights and want to confirm you used the 57 inch. Also, is there ANY WAY for me to buy the same mounts you have???
@BustedKnuckleVideo
9 ай бұрын
We custom made the mounts. They weren’t too bad but not something we make for customers
Which way was the wind blowing? The white cars next door looked prime for a black shadow 😏
@BustedKnuckleVideo
3 жыл бұрын
East
Who makes the bracket for the KC lights. Looks perfect
@BustedKnuckleVideo
3 жыл бұрын
we custom built it
My wife said that was 9.5 - 10 inches headroom.
@BustedKnuckleVideo
3 жыл бұрын
atleast HA
Great videos. How did you wire the kc lights in for the interiors. I’ve been trying to install these inside mine.
@BustedKnuckleVideo
Жыл бұрын
we wired it into a switch on the new tuffy/desolate console
@samschroeder25
Жыл бұрын
@@BustedKnuckleVideo good to know. Wasn’t sure if you were wiring it to where the bulb was coming out. Thanks!
Said you changed distributor . Check wiring from switch to distributor and voltage .Do a compression test on all the cylinders. And check the valves if not already ?
@BustedKnuckleVideo
3 жыл бұрын
Done done and done
@larryalexander4833
3 жыл бұрын
@@BustedKnuckleVideo lol
Check the throttle body senor
@BustedKnuckleVideo
3 жыл бұрын
it was clogged injectors
Where can I buy the front Bronco seat brackets you used? Also is that a vinyl floor liner, if so where can I get it? Thank you
@BustedKnuckleVideo
3 жыл бұрын
Solo motorsports for the brackets
@Mike-xn1bh
3 жыл бұрын
@@BustedKnuckleVideo Where did you get the vinyl floor liner? I’ve been looking for something in tan to match my desert tan paint.
Do a compression test before yanking. I mean, are you getting a pulse signal at the coil from ecm, icm, and distributor?
@BustedKnuckleVideo
3 жыл бұрын
Already did compression test and everything looked fine.
@byronsmith25
3 жыл бұрын
Yes on the pulse signal. Every spark plug is firing. It will actually run injecting starting fluid into the intake.
did you shut off the security when you did your tune? on a chevy i swapped i did hp tuners and after two months found out i had to change a crank sensor number value from zero to a one. id recheck that junk before yanking the motor.
@BustedKnuckleVideo
3 жыл бұрын
these had security?
@byronsmith25
3 жыл бұрын
I am a little curious about this question. It does have a factory keyless entry with some type of security. Not sure if it has a fuel or spark interrupt, though. Great question!
@byronsmith25
3 жыл бұрын
Just looked it up. Looks like the security system would have had a starter interrupt, which wouldn't have allowed the starter to turn over. We were able to get that to happen.
What seat bracket adapters did you use?
@BustedKnuckleVideo
2 жыл бұрын
I believe they were Solo
Wiring under the dash
@BustedKnuckleVideo
3 жыл бұрын
something funky is going on for sure
Ls swap is most certainly the way to go. No one will regret the fun factor, simplicity, cost, and channel content. DO IT !!
@BustedKnuckleVideo
3 жыл бұрын
Agreed!
@anonymous-bk2dl
2 жыл бұрын
Ls engines are fucking junk
@rogerwatson3147
2 жыл бұрын
Coyot!!
Any plans on selling those light bar brackets?
@BustedKnuckleVideo
3 жыл бұрын
no they were one off
What light bar from KC is that?
@BustedKnuckleVideo
3 жыл бұрын
Pro 6
Hey, is it possible to put the center console kit from Desolate in a 91 F150. How different is the 91 to 92 F150 interior, as far as dimensions go?
@BustedKnuckleVideo
Жыл бұрын
should work. We have the same console in a Excursion
@haydenbriggs
Жыл бұрын
@Busted Knuckle Films Awesome! Thank you, I love this build!
@BustedKnuckleVideo
Жыл бұрын
We appreciate it!
i can't find the previous video
@BustedKnuckleVideo
2 жыл бұрын
kzread.info/dash/bejne/dGWuqpiahaSqhJs.html
Dont ls swap the Bronco, Gotta keep a Ford motor in the Ford.. use a 5.4 lightning motor or a 6.2 raptor motor instead lol it is the braptor after all, or a Ford 7.3 godzilla motor..
@BustedKnuckleVideo
2 жыл бұрын
LS it is! HA
@rogerwatson3147
2 жыл бұрын
Coyote!!
@krygerm
2 жыл бұрын
@@rogerwatson3147 5.0 Coyote would be sick too, Was also thinking a 5.2L Voodoo crate engine would be sick. The sound that motor makes with that flat-plane crank is gnarly
Check the computer for blown capacitors, common issue
@BustedKnuckleVideo
3 жыл бұрын
we put a new computer in it and still the same
Have you tried checking spark and compression
@byronsmith25
3 жыл бұрын
Yes. Spark on all 8 and good compression. Actually can somewhat run on starting fluid
@BustedKnuckleVideo
3 жыл бұрын
gremlins...
@DavidGutierrez-yk6hw
3 жыл бұрын
Check fuel relays
What’s the width of the seats? Standers or wide width?
@BustedKnuckleVideo
2 жыл бұрын
standard
Did these trucks have the little red impact button under the glove box?
@BustedKnuckleVideo
3 жыл бұрын
I'm not familiar with that.
@brandonfenstermaker2375
3 жыл бұрын
@@BustedKnuckleVideo some of the fords had an impact switch under the dash behind the glove box that wouldn’t allow them to start, i’m not real familiar with it but I’ve seen it and some of the earlier EFI models
@byronsmith25
3 жыл бұрын
@@brandonfenstermaker2375 Yes, they do have the impact fuel switch. But that only cuts off the fuel pump (from my knowledge). Fuel pump is running and it is getting into the cylinders. We actually checked 5 injectors with a noid light. Only 5, because the other two are buried under the intake.
Can u send me link to the console and adapter to purchase
@BustedKnuckleVideo
Жыл бұрын
desolatemotorsports.com/shop/fabrication/desolate-motorsports-diy-center-console-kit-for-92-96-bronco-f-series-trucks/
Check the computer, I know there are a few caps that blow and causes it not to run.
@BustedKnuckleVideo
2 жыл бұрын
it was clogged injectors
No front part to the cage? So it’s just a roll bar?
@BustedKnuckleVideo
3 жыл бұрын
sport cage. It will save your life
@davedonedis
3 жыл бұрын
Oh, you are going to add a sport cage like they sell for Jeep’s that adds the A-pillar bars and the rest of the cage to cover the driver. 👍
Who did the rear cage ?
@BustedKnuckleVideo
Жыл бұрын
Desolate Motorsports
Yes LS swap for the win. #lsswapeverthing
@BustedKnuckleVideo
2 жыл бұрын
YES!
@anonymous-bk2dl
2 жыл бұрын
Ls engines are fucking junk
What a parts changer you are but I like your style. I am a diagnostic tech let me know if you need some brains to go with your style Fox Tire And Auto Northridge CA
@BustedKnuckleVideo
2 жыл бұрын
LS swap it is!
I had a jeep once that I probably spent $1500-$2000 dollars on parts and investigation for a stalling problem. Turned out to be a bad ground to the frame. $5 at most to fix.
@BustedKnuckleVideo
3 жыл бұрын
we checked grounds too
what did you use for the floor
@byronsmith25
3 жыл бұрын
Just a vinyl replacement floor. I can't remember the manufacturer, but you can get them online all day long. Requires some trimming, but pretty easy to install.
@BustedKnuckleVideo
3 жыл бұрын
it is so quiet in there now!
@davidlockwoood735
3 жыл бұрын
@@byronsmith25 Thank you im building a rock buggy out of a cherokee and the metal floor is kindve ugly
@Mike-xn1bh
3 жыл бұрын
I too am looking for the exact brand because I’m looking for the same color vinyl. Anyone know who makes it?
Is the motor carbureted or fuel jectors
@BustedKnuckleVideo
3 жыл бұрын
It was the Fuel Injectors! Good Call!
@jeffwilliamson7831
3 жыл бұрын
@@BustedKnuckleVideo I was just wondering if it was carbureted cuz the carburetors have problems too with the paper filter from Ford factory
@BustedKnuckleVideo
3 жыл бұрын
No we swapped it to the newer fuel injection setup from Fiveology
@jeffwilliamson7831
3 жыл бұрын
Yeah I like watching your videos and stuff they're pretty cool with the big boy toys
Did you set it to wumbo
@BustedKnuckleVideo
3 жыл бұрын
wumbo?
Stuff and dart 427 in it
@BustedKnuckleVideo
3 жыл бұрын
if money was no option....
@dannycrayton725
3 жыл бұрын
@@BustedKnuckleVideo I built one for just under 13k
@BustedKnuckleVideo
3 жыл бұрын
LS motor is 1300......
@dannycrayton725
3 жыл бұрын
@@BustedKnuckleVideo that will work too!
When the bouncer videos coming out
@BustedKnuckleVideo
3 жыл бұрын
patience
On the next episode of DEATH WISH... Man drives stock Ford Bronco across the "county!" Will he make it?! Nothing wrong with a Ford, I have one in my yard too! K5 Blazer with LS1 in the garage... 🤣 (It keeps the grass under control, one busted Ford at a time! Eventually, you wouldn't have to cut the grass again... if you only drove Fords.)
@BustedKnuckleVideo
3 жыл бұрын
LS swap will take care of it
@Aint1S
3 жыл бұрын
@@BustedKnuckleVideo Yes Sir, that'll fix right up! It really is a shame that Ford's answer to GM was burying the plugs beneath the heads and making horrible choices for "modular" motors.
@anonymous-bk2dl
2 жыл бұрын
@@BustedKnuckleVideo ls engines are fucking junk lol. Anyone who thinks otherwise is a moron.
@rogerwatson3147
2 жыл бұрын
Coyote!!
@brianbirc
Жыл бұрын
LS ina K5 i get but in a Bronco? why?
LS Swap it for the HATERS!!!!
@BustedKnuckleVideo
3 жыл бұрын
YES!
She still getting that engine swap?
@BustedKnuckleVideo
4 ай бұрын
Yep already done just fixing some tuning and transmission issues
@mulletmansean2480
4 ай бұрын
@@BustedKnuckleVideo hell yeah man can’t wait to see this thing back
@BustedKnuckleVideo
4 ай бұрын
We will try and do an update once everything is dialed
LS swap on bronco? that's a mortal sin....
@BustedKnuckleVideo
3 жыл бұрын
That’ll get the Ford purists talking for sure
@DadPool_Hyde
3 жыл бұрын
@@BustedKnuckleVideo not a ford purist, but definitely a bronco purist...unless you wanna go batshit crazy and do something like a VR38DETT swap on it ;)
Great video till the last second smh
@BustedKnuckleVideo
3 жыл бұрын
not liking the LS swap comment?
@joereyes5154
3 жыл бұрын
@@BustedKnuckleVideo nope. I'm sure you guy's don't have emissions like out here in CA. Just build up the o.e engine. Be different be unique 😁
@BustedKnuckleVideo
3 жыл бұрын
Ls just makes sense
Coyote swap it!
@BustedKnuckleVideo
3 жыл бұрын
for double the cost of LS swap....
@KaiserBruh
2 жыл бұрын
@@BustedKnuckleVideo says the dude thats spent 25k on it lol
@anonymous-bk2dl
2 жыл бұрын
@@BustedKnuckleVideo not even close. You gotta factor in rebuilding the ls every month. That adds up quick. Coyote is the smart choice.
Please for the love of God don't LS swap that thing! That is sooo played out at this point, that is a great engine, just rebuild it!
@BustedKnuckleVideo
2 жыл бұрын
TOO LATE! HA
@jns66jns
2 жыл бұрын
@@BustedKnuckleVideo as a bronco guy, I am disappointed! lol
Leave the Ford engine
@BustedKnuckleVideo
3 жыл бұрын
the one that doesn't run? lol
@Mike-xn1bh
3 жыл бұрын
@@BustedKnuckleVideo Put a 460BBF in
You put an LS in that FORD BRONCO and you will lose a subscriber.....Put a svo winsor or a coyote in it!!
@BustedKnuckleVideo
8 ай бұрын
K bye ✌️
Godzilla
@BustedKnuckleVideo
10 ай бұрын
Big money
Hey Byron loved the video. How did you make such beautiful straight perfect cuts in the new console for the speaker, radio, And accessories? Thanks.
@BustedKnuckleVideo
Жыл бұрын
lots of tape, measurements, and a dremel