SEE PART 2 HERE > kzread.info/dash/bejne/eX2tybOwir3XmaQ.html

@user-zv3jy8gw3i

5 жыл бұрын

Мужики, очкий надевайте

@brianbirc

4 жыл бұрын

With the front TTB after my first shakedown an 80 mile poker run. I did some rebuilding. I had cut and turned lift and long chomemoly radius arms on heims already. I gusseted and plated the beams added bigger top and bottom plates and a vertical mounts to the radius arms mount to the beams. I changed my spindles to 96 models with bolt on calipers over the hammer in clips. Put in the F250 slip shaft with F 250 U joint and got chromoly shafts. Longer outer shafts to change my factory only hubs to Warn on my year (manual hubs are strongest). All fresh U joints seals and ball joints plus rebuilt calipers and upgraded rotors with my still new bearings. The VERY IMPORTANT part was to cycle each side and clear any binds spinning the wheels in 4x4 from all positions up and down and steering directions . It took some time and grinding but got it all cleared gained travel and set my limit straps and bumps. It paid off and has been bulletproof in surprises and smooth with my Kings. Funny King is local and at contingency for the Mint 400 I set off to thank Bret for my shock tuning. When back at home looking at pics my girl took I see a close pick of BJ Baldwin. I say nice pic she mentions the kids in it I said do you know who this is when did you take it ? She does not know and I tell her. She says oh I took it when you had us on the misson to the King trailer. LOL I thanked Bret King and was introduced to The King himself both were happy with big smiles for my thanks. I told her BJ may have wanted to come with or pass on a thanks from him as he runs Kings LMAO You will be very stoked with your Bronco and this level of build doing it right.

@nauidiver227

4 жыл бұрын

Would it be crazy to make a bronco long bed?😃

@brianbirc

4 жыл бұрын

@@nauidiver227 They did make them.There are four door full size Broncos not considered a bed that would make it a truck also some made with 4 doors and a long bed. Not the best off road but maybe for some built huge like a monster muddin truck but do not count on my comment for that I am not a mudder only do that if needed.

@nauidiver227

4 жыл бұрын

@@brianbirc there's no such thing.

Definitely will be coming back to this series for motivation. At 17 years old, I’m working hard right now to save up to do a decently priced bronco build. I can’t wait to own one. Looking forward to the next vid!

@BustedKnuckleVideo

5 жыл бұрын

Christian Ortiz there are some good ways to budget build one for sure.

Man that’s a dream bronco

@BustedKnuckleVideo

5 жыл бұрын

ripfletching just wait until you see it finished 😎

@ripfletching

5 жыл бұрын

BustedKnuckleVideo hey I have a great idea 💡 you guys could give it to me and I’ll base a KZread channel about you guys and the bronco

@ripfletching

5 жыл бұрын

Lol 😂

@BustedKnuckleVideo

5 жыл бұрын

Lol this Ain't Diesel Bros

@ripfletching

5 жыл бұрын

BustedKnuckleVideo I’m just having some fun

I like that your showing the work and catching points, and not montaging past it. IMO showing the work and the problems you run into, make for the best and most helpful videos. Anytime I can learn something from someone else, and their tips and tricks, i consider a win. Thanks for the Video!

@BustedKnuckleVideo

5 жыл бұрын

Glad you like the video, thanks for the feedback it really helps

This is such an awesome build . I love ford broncos.

@BustedKnuckleVideo

5 жыл бұрын

We are loving it

Back in '93, my dad and I did a 4" Superlift on an 85 bronco... SO MANY RIVETS!!! Afterwards, that thing handled like a dream!

@BustedKnuckleVideo

5 жыл бұрын

heck yeah

Fantastic video!! Love it! Excited for the next one.👍

@BustedKnuckleVideo

5 жыл бұрын

its been a fun one!

I’m not planning on doing this to my Bronco, but it’s cool to see all the guts coming out.

@BustedKnuckleVideo

4 жыл бұрын

It's turning into one cool rig

What I could and would do with my Bronco, if I had the time. Awesome!

@BustedKnuckleVideo

5 жыл бұрын

Can't wait to show everyone the end results of this build!

All those nice parts... awesome

@BustedKnuckleVideo

5 жыл бұрын

yeah we might have went a little over budget....

I’m excited for part 2 now. And makes me wish I had a bigger garage to go start on my small lift project

@BustedKnuckleVideo

5 жыл бұрын

haromaster1988 well finish it up and put it to the test!

Holy Moly thats gonna be frickin Awesome!! Lookin for pt 2 now... I have an 88 and would live to have somethin like this done to it. Thanks for taking the time and sharin suspension dreams for a Bronco😎

@BustedKnuckleVideo

4 жыл бұрын

it looks a little different now

This thing is cool! Radius Arms are beautiful! Really like these build series!

@BustedKnuckleVideo

5 жыл бұрын

Thanks! It's been a lot of fun, who knows what we will build next

Love it!

@BustedKnuckleVideo

5 жыл бұрын

Can't wait to get it finished!

awesome. I owned a 84 Bronco for 20 years that I installed a mild lift into and other performance mods. I always wanted to build a pre-runner but even tho I didnt, that Bronco was the best multi purpose vehicle I ever owned. I drove it on numerous road trips and off roaded thousands of miles and it never once left me stranded. I always prefer a carb over efi for doing emergency diagnose and repairs. Just lower the float level and rejet for elevation and bouncy rides. Keep on wrenching!

@BustedKnuckleVideo

5 жыл бұрын

its been a fun build for sure

Makes my pro comp stage two, 4 inch lift on my truck look amateur! I think I had 18 rivets to cut since I also replaced my shock towers because of rot! Love the travel and ride it gave me so I can only imagine how this is going to ride ! Awesome video. I need some inspiration to further my project

@BustedKnuckleVideo

5 жыл бұрын

Josh Rosiak this is going to be nuts!

Desolate makes some rad parts, gotta love go fast broncos 💪

@BustedKnuckleVideo

5 жыл бұрын

we have been very impressed with the quality

It’s my Friday... normally get home right at 6:00 but I’m blowin this joint early tonight!!!!

@BustedKnuckleVideo

5 жыл бұрын

Heck yeah!

Great video, can’t wait to see the finish

@BustedKnuckleVideo

5 жыл бұрын

We are pumped

Man I wish I could do this with you guys, my '90 Bronco needs this haha

@BustedKnuckleVideo

5 жыл бұрын

it makes a world of difference

I have been checked like every couple days can’t wait to see the end result

@BustedKnuckleVideo

5 жыл бұрын

its coming and its awesome!

Estos tipos son geniales!!

Keep up the good work. Yalls bronco is coming along nicely. Got an 86 bronco im fixing to drain my bank account on. Going all out.

@BustedKnuckleVideo

5 жыл бұрын

Heck Yeah!

gracias por subirlo nuevamente :)

@BustedKnuckleVideo

5 жыл бұрын

gracias por ver

@ramirorivera478

4 жыл бұрын

@@BustedKnuckleVideo ah chingao! hablan Español😲

YEESSSSS.... Desolate!!! So Cal represent!

@BustedKnuckleVideo

5 жыл бұрын

They killed it on the parts

That welder sounds right on,. I used to weld for full throttle suspension.

@BustedKnuckleVideo

3 жыл бұрын

Not bad for a knucklehead

Looking real good

@BustedKnuckleVideo

5 жыл бұрын

It'll look even better with Fiberglass fenders

Как мне нравится этот авто .я хочу себе такой.... молоцы ребята.удачи.👊👊👊

@BustedKnuckleVideo

5 жыл бұрын

Благодаря этому сборка получается лучше, чем мы когда-либо могли ожидать.

Cant wait to see tha beast fly

@BustedKnuckleVideo

5 жыл бұрын

SAIL!

Your videos are AWESOME 😎

@BustedKnuckleVideo

4 жыл бұрын

Thanks!

Now this is bad ass! Not too many people know what a pre runner is in your neck of the woods!

@BustedKnuckleVideo

5 жыл бұрын

All the more reason for us to build one!

Good job, with respect from Russia!!!

@BustedKnuckleVideo

5 жыл бұрын

Играю в ТАНКИ!!! Thanks!

Nice!!

@BustedKnuckleVideo

5 жыл бұрын

Loving this build!

That's some awesome products. I run a 88 bronco, it's a trail truck that sees mud , rocks, gravel forestry roads, deep snow bogging and lots of fishing and hunting. So it's got a 408w with 650 Holley double pumper, hei, np435 with 6.68to1 ratio 1st gear, np208 t case cuz it's the slowest. 1990 f350 axles. D60 n sterling 10.25 4.10 ratio. Both locked. Deaver 6 inch leafs and coils up front. Cage off road radius arms. I run 15x39.5x15 tsl s up front grooved and 18x39.5x15 boggers out back grooved. And for gravel n street I run 37x13.50x18 nitto mud grapplers on KMC xd809 wheels. Lots n lots of other mods. So 10 years running hard, hundreds of small jumps n crawling rocks with no issues. It's been such a tough rig. Love it

@BustedKnuckleVideo

5 жыл бұрын

They are awesome platforms

Been waiting on this for a hot minute!!

@BustedKnuckleVideo

5 жыл бұрын

Southern Ties SxS making broncos great again takes time.

@southerntiessxs1515

5 жыл бұрын

BustedKnuckleVideo Oh yea without a doubt !! It’s gonna be a sweet build can’t wait to see more content on it

@BustedKnuckleVideo

5 жыл бұрын

soon!

Good job!!!

@BustedKnuckleVideo

4 жыл бұрын

Thanks1

Thats a sick set up.

@BustedKnuckleVideo

2 жыл бұрын

it is so much fun to drive now

Nice work, hope to end soon the project

@BustedKnuckleVideo

5 жыл бұрын

new vid coming soon

Watching all of your work on the bronco makes me realize I need friends to help me work on mine!

@BustedKnuckleVideo

Жыл бұрын

Friends are key

I wanna do the same to my 91 bronco my dad gave me for graduating. Sweet pre runner

@BustedKnuckleVideo

5 жыл бұрын

sounds like a good plan

Dude!!!!! That is awesome!!!!👍 Hey dude, hold my beer while I weld this in real quick!!!

@BustedKnuckleVideo

5 жыл бұрын

David Toth good times In the shop

@davidtoth7114

5 жыл бұрын

BustedKnuckleVideo there is nothin wrong with some time In the shop!! My dad and I do our own machanics ! We save sooo much!!!! I love working on vehicles!

@BustedKnuckleVideo

5 жыл бұрын

I like modifying vehicles, maintenance not so much....

"Are your eyes open right now?" The southern motor head is an American treasure.

@BustedKnuckleVideo

Жыл бұрын

true

lo mejor una bronco num.1

Great video keep it up🤙

@BustedKnuckleVideo

5 жыл бұрын

Thanks!

OJ would love it.

@BustedKnuckleVideo

5 жыл бұрын

Yes he would

"if that don't make ya happy..." no no, I'm good, it does make me happy... but I'm really here for the TTB, many fond memories of that lovely contraption...

@BustedKnuckleVideo

4 жыл бұрын

they can be made to work so well

MORE!!!!!!!!!!!! next ep please!!!!!!!!!!!!!!!!!!!

@BustedKnuckleVideo

5 жыл бұрын

EP3 coming soon!

hell yea falken wildpeaks! I just put a set of 33x12.50x15 wildpeaks on my bronco and they look like they should have came on it from the factory. Also those radius arms and skidplate are beautiful. I wish I could afford that skid, my bronco is stock and even though I don't offroad much I am always catching either the skid or the trailer hitch on all sorts of stupid shit and that aluminum skid looks like it's way sturdier and tucks up more neatly than the ugly stock skid.

@BustedKnuckleVideo

5 жыл бұрын

Cody Brady we cant wait to try them out in the desert. Desolate skidplate is beef for sure.

Man thoughs swaybar brackets look great

@BustedKnuckleVideo

4 жыл бұрын

its a nice setup

About damn time

@BustedKnuckleVideo

5 жыл бұрын

It takes time to gather parts for a build like this.....

@ISAIAHURT14

5 жыл бұрын

BustedKnuckleVideo all worth the wait for a 28 minute video

Fucckk. That some suspention kit going all out pro prerunner

@BustedKnuckleVideo

5 жыл бұрын

It BAD!

Nice video u guys make very good job 👍

@BustedKnuckleVideo

5 жыл бұрын

Thanks!

Looking good - always wanted to do a long travel TTB setup but there is just no use for it in the midwest.

@BustedKnuckleVideo

5 жыл бұрын

Kyle Q lol we are in Alabama!

ALL YOUR PARTS LOOK SWEET ESPECIALLY THE METHOD RACE WHEELS KEEP UP THE GREAT VIDEOS OH AND A BELATED HAPPY NEW YEAR FROM ENGLAND

@BustedKnuckleVideo

5 жыл бұрын

THANKS!

My word need one of dem hats...

@BustedKnuckleVideo

5 жыл бұрын

yourneck2 we got em in stock bustedknucklegear.com

Used to work as a Ford dealer tech . I hated changing those in tank fuel pumps . I would build a door in the floor to access the pump . Then you can change the pump fast .

@BustedKnuckleVideo

5 жыл бұрын

already done

Looks good, don't remember if you show making the front bumper but I like it simple and clean.

@BustedKnuckleVideo

4 жыл бұрын

14x4nut we didn’t show it, clean and simple for the win

YOUR RIGHT YOU GUYS ARE TOO GOOD FOR TV STAY ON KZread AND THE BEST OF LUCK

@BustedKnuckleVideo

5 жыл бұрын

Thanks!

Looks great, I have the same wheels on my 79 Bronco. It’s bad ass, but not pre runner bad ass.

@BustedKnuckleVideo

5 жыл бұрын

Heck yeah, can't wait to see how they hold up in the desert

Sweet!!!!!!!

@BustedKnuckleVideo

5 жыл бұрын

Quickly become our favorite build thus far

Nice job guys...now my " Betty" has a twin sister out here in So Cal.. I would Love too meet up with Yall .. God speed Guys!!

@BustedKnuckleVideo

5 жыл бұрын

We will be at KOH next week!

Omg💯 build my 86 bronco ‼️‼️‼️‼️

@BustedKnuckleVideo

5 жыл бұрын

We can do that if you have the cash.

I had a 1985 Bronco I back in 1990 and put a 6 inch suspension lift on it with 35s.It took me 2 days .

@montemaguire4596

5 жыл бұрын

But it wasn't NOTHING like this.

@BustedKnuckleVideo

5 жыл бұрын

This is a bit more work I think lol

@johnyhawgleg

5 жыл бұрын

This is a lot more work for non mechanics, beer is also involved. That means before editing there was cusin and buddy bashing going on. By the way what ever happened with the K-5 project? Did he get the engine decided yet really would like to see that beast get finished.

Gawsh dayumn that's one sick build ! Go all out or get hauled out am I right !? Don't see much can stop your angry horse now ! 💪💀✊

@BustedKnuckleVideo

5 жыл бұрын

Itll be BAD!

Wow using a chil like that and almost impaled him. Nice

@BustedKnuckleVideo

4 ай бұрын

Huh?

I have a full coilover.. 4 link class 8 with no sway bars & it works great. Ive been racing score/bitd/code many years

@BustedKnuckleVideo

5 жыл бұрын

Congrats! This isn't a race rig. It is build to be a daily driver that can also rip across the desert. How many times have you won your class?

@wayneolsen9729

5 жыл бұрын

@@BustedKnuckleVideo many times in different classes... Your bronco is cool.. I have bronco buddys. I just dont know why you put sway bar... But its every kit that you can buy from desolate lol.

@BustedKnuckleVideo

5 жыл бұрын

If it doesn't work we will remove it. For shock tuning we always run a rear sway bar, the fact that your rig on coilovers and 4 links doesnt have a rear sway bar means you are leaving something on the table as far as shock tuning goes.

Damn I need a set of those jack stands

@BustedKnuckleVideo

2 жыл бұрын

home built and work great, we used them on the excursion build as well

@williamdavis1887

2 жыл бұрын

@@BustedKnuckleVideo I’ll need to build a set of those!

This is amazing! Would you be willing to share the ABS jumper trick you mentioned?

@BustedKnuckleVideo

5 жыл бұрын

yes next episode

in the live comments you say you only got a 2000 dollar engine budget but yet you got 6-7000k of suspension love it ! I am with every one its a ford keep it ford yo !

@BustedKnuckleVideo

5 жыл бұрын

We went over budget on suspension so the engine budget is tight

@bradbrown7274

5 жыл бұрын

BustedKnuckleVideo that’s why we call them long term projects lol

@BustedKnuckleVideo

5 жыл бұрын

Nothing long term about this one, its almost ready for a test drive

i hate you guys cause I can't do none of that. FRIEKEN AWESOME!

@BustedKnuckleVideo

4 жыл бұрын

Nothing to it!

About time to upload again

@BustedKnuckleVideo

5 жыл бұрын

episode 3 will be out sometime in feb-march

Excellent video, congratulations. On which page can I buy those brake discs for my bronco?

@BustedKnuckleVideo

10 ай бұрын

Powerstopbrakes.com

after your done swinging it, your thor LMFAO. that's hilarious

@BustedKnuckleVideo

2 жыл бұрын

HA glad someone thought so

Fun stuff, good job. bar soap smells better, and lasts longer as polyurethane bushing lube than wd-40. Just saying.

@BustedKnuckleVideo

5 жыл бұрын

interesting

Please don't leave us in the dark halfway through the build like the Blazer!!

@BustedKnuckleVideo

5 жыл бұрын

almost finished with EP 3

Put a stand or block under the diff when your hitting the hub out! It's moving when you hit it and absorbing your impact

@BustedKnuckleVideo

5 жыл бұрын

It worked eventually

@DarrenBoxhall

5 жыл бұрын

@@BustedKnuckleVideo it certainly did. Im just letting you know,for future

@BustedKnuckleVideo

5 жыл бұрын

We wont build one of these again lol

BRO! i thought you had said some months back you were gonna build a "budget" prerunner??? LOL this thing will stir up a hurtin for certain!!!

@BustedKnuckleVideo

5 жыл бұрын

Budget was the plan and then we went a bit over budget lol

@desertrider9600

5 жыл бұрын

Unfortunately you can’t build a budget prerunner bronco. I’ve tried!

I'm going to have naughty dreams about this bronco

@BustedKnuckleVideo

5 жыл бұрын

It's going to be a mean machine!

"Put it in reverse terry!" 😂

@BustedKnuckleVideo

4 жыл бұрын

LOL

Nice job on the video. Not so much on the safety glasses lol... hopefully you'll be able to see your finished product

@BustedKnuckleVideo

5 жыл бұрын

we wear them for the most part

how do you guys determine where to mount the coilover cage to get your desired shock angle? also how do you know what angle you want to mount your shocks at?

@BustedKnuckleVideo

3 жыл бұрын

it was part of a kit

Watching every bit of this! Got the EXACT bronco and would really benefit off road use with these up dates... what are we lookin at for parts alone 22k?

@BustedKnuckleVideo

4 жыл бұрын

Total parts list as it sits today is around $25k

9:33 it'll stay in the rearview mirror 😂😂😂😂😂🤘

@BustedKnuckleVideo

4 жыл бұрын

not with all this woopow

How i test the abs system? Got a flashin od light and abs light

Love the videos. Just bought all the parts I need for my suspension upgrade on my 94’ bronco. I’m a car guy and only have short jack stands. Where did y’all get those stands?

@BustedKnuckleVideo

4 жыл бұрын

we built the jackstands

@gagacrazy10

4 жыл бұрын

Pretty easy to build, especially if your confident enough to do a suspension upgrade yourself 👍🏻

Do the 5/8 wheel studs fit in the stock holes or did you guys have to drill em out or special order those rotors to fit?

@BustedKnuckleVideo

Жыл бұрын

pretty sure we drilled them out

Damn I miss my 90 Bronco regret getting rid of it

@BustedKnuckleVideo

5 жыл бұрын

They are fun

Can you please finish this bronco! I check daily to see if has another video!

@BustedKnuckleVideo

5 жыл бұрын

We are working on it right now. EP 3 should be out later this month.

I needed a good laugh, thor

@BustedKnuckleVideo

5 жыл бұрын

T I want to go get a Thor hammer now. It out in work on this bronco!

2:36 you're god dam right haha

Hey Bro, the coil spring how many lbs are? The bronco look so smooth on the other video

@BustedKnuckleVideo

Жыл бұрын

Hit up Desolate Motorsports, they have these kits dialed

I’d be curious to see what your opinion is on bronco vs the jku....I get the jku can rock climb and all that but I’m currently looking for an off-road toy just for trail riding do not do any rock climbing or anything....I trail ride with my brother (raptor) other brother (JLUR) and other friends jku and I want to build a somewhat budget off-roader debating between this and older jku (with the 3.8) or tj because it will be just toy not a DD....just like the idea of the extra room of the jku but they are expensive even for older ones that’s why I think the bronco would be a cheaper alternative (I get suspension isn’t cheap but the buy is) I just enjoy jeeps (I own a CJ7) because of the open air feel but you have the half cab with the bronco I’d like to know your thoughts after she all put together would you rather have the bronco or a jku for trail riding not for rock climbing Thank you and keep up the good work !

@BustedKnuckleVideo

5 жыл бұрын

Bronco should be fun to keep up with a Raptor in but a JKU with the right suspension works great too. let your wallet be your guide

Come get my 95!!! I wouldn’t mind at all!! Take the 6” rough country off and trash it 😎😎👍👍👍

@BustedKnuckleVideo

5 жыл бұрын

We have our hands full with this one

Awesome build. Running 37 or 35 inch tires ?

@tjsilverjones

5 жыл бұрын

Looks like 35s

@BustedKnuckleVideo

5 жыл бұрын

35s for now.

Where have I heard Yahtzee before? Must be another guy holding a beer ;-p

@BustedKnuckleVideo

5 жыл бұрын

Parrish Hemmeke probably!

I see that Auburn cooler. Where are y’all in Alabama? Prattville here. Good video.

@BustedKnuckleVideo

5 жыл бұрын

We are all Auburn Alum, This was shot in Decatur

This is a long shot with the age of this video but what offset are you running on those method wheels? Looking to also stuff some 37s underneath

@BustedKnuckleVideo

4 ай бұрын

It has 37s now. Good question

@JonathanGarcia-gr3no

3 ай бұрын

I noticed that in one of the other videos, curious what your wheels specs were

Awesome build. Now you need to yank that anemic ford motor out of it and put an LS in it.

@BustedKnuckleVideo

5 жыл бұрын

I would love to do that but its not in the budget so we are going to see how we can budget build the 351

thats it...im send yall my bronco to rebuild for me

@BustedKnuckleVideo

5 жыл бұрын

Send it and a blank check!

What kind of Springs tension did you use on the front

@BustedKnuckleVideo

3 жыл бұрын

springs tension?