Finding SIPS where I live is like looking for hens teeth. I'm not crazy about particleboard but the insulation level looks good on this build.
@sweetiepienumber1 Жыл бұрын
Thank you for sharing.
3 жыл бұрын
Hello, nice Job ! How do you fix SIP on the trailer ?
@morganthomas15503 жыл бұрын
Awesome video, I've wanted to build with sips for years and wanted to do a tiny house for just as long. I'm going to build one with sips now 👍
@KnutHansen123
2 жыл бұрын
How did it work out?
@jubileeYAVEL
2 жыл бұрын
Yeah I want to know how it works
@zayvier6911 ай бұрын
What are the furring strips for?
@AmandaComeauCreates Жыл бұрын
How is this structure bolted to the trailer?
@planetmoving91805 ай бұрын
Why the subfloor insulation when the sip floor panels have good r value. Is subfloor insulation just moisture protection from below maby.
@ronaldomulatico Жыл бұрын
I'm looking to build a tiny house between 21/24 SQM. Would you do to my specifications? Thanks.
@sjr78222 жыл бұрын
Well, I guess this isn't a one-person project
@David_Mash2 жыл бұрын
Why the foam layer as a subfloor under the floor sips panel
@bjadvanturz
2 жыл бұрын
Totally agree. There is no use for the foam and then the sip floor.
@rmontena4583
Жыл бұрын
maybe they want a warmer floor without adding height. :)
@motowninvestor Жыл бұрын
Can I order a tiny house shell from this company? Is this company still in business?
@KnutHansen1232 жыл бұрын
I don't understand the concept Sips if you can't finish wall's in one step...might as well do it in 2 by 5
@Steve-cn5up
2 жыл бұрын
I agree 100%! Why spend on average $250 for a 4x8 sip panel and then fur out the inside and outside just to make the interior a little bit more airtight? Now your tiny house heating bill goes from approximately $10 a month to 8 per month. Your payback for the extra costs of building with sips would probably be about 75 years lol! If I could find a sip panel with plywood on one side and something like lp smartside on the exterior so after I set my panels I'd be done with framing, insulating and finish work, I'd probably be onboard with the idea but not with the labor intensive method shown in this video.
@marlaplunk2833
2 жыл бұрын
@@Steve-cn5up You can be done with framing once the SIPs are installed. I don't know why these guys chose to add furring, but it's not necessary - although they didn't explain why, and it might be necessary .. lol. Even SIPs made of pressure treated lumber designed for basements don't need furring.
@bjadvanturz
2 жыл бұрын
@@Steve-cn5up I've done a lot of research. Not sure what company does that, but they do use smartside on the outside.
@bjadvanturz
2 жыл бұрын
@@marlaplunk2833 They just took another 4+ " from the interior space. Totally not necessary to use the furring strips
@DaddyBear3000 Жыл бұрын
Well damn, why don’t you do a proper job of it 🤣🤣 Awesome build, not a beat missed 👏🏼 🙌🏼
@bignerondominique760610 ай бұрын
Hello from belgium, non profit organisation we would like bild 30 little SIP home(25m2,each) for Homeless people but we don't find any factory to this job, can you help us???? NPA/ A Roof for the futur". Dominique
Пікірлер: 23
Finding SIPS where I live is like looking for hens teeth. I'm not crazy about particleboard but the insulation level looks good on this build.
Thank you for sharing.
Hello, nice Job ! How do you fix SIP on the trailer ?
Awesome video, I've wanted to build with sips for years and wanted to do a tiny house for just as long. I'm going to build one with sips now 👍
@KnutHansen123
2 жыл бұрын
How did it work out?
@jubileeYAVEL
2 жыл бұрын
Yeah I want to know how it works
What are the furring strips for?
How is this structure bolted to the trailer?
Why the subfloor insulation when the sip floor panels have good r value. Is subfloor insulation just moisture protection from below maby.
I'm looking to build a tiny house between 21/24 SQM. Would you do to my specifications? Thanks.
Well, I guess this isn't a one-person project
Why the foam layer as a subfloor under the floor sips panel
@bjadvanturz
2 жыл бұрын
Totally agree. There is no use for the foam and then the sip floor.
@rmontena4583
Жыл бұрын
maybe they want a warmer floor without adding height. :)
Can I order a tiny house shell from this company? Is this company still in business?
I don't understand the concept Sips if you can't finish wall's in one step...might as well do it in 2 by 5
@Steve-cn5up
2 жыл бұрын
I agree 100%! Why spend on average $250 for a 4x8 sip panel and then fur out the inside and outside just to make the interior a little bit more airtight? Now your tiny house heating bill goes from approximately $10 a month to 8 per month. Your payback for the extra costs of building with sips would probably be about 75 years lol! If I could find a sip panel with plywood on one side and something like lp smartside on the exterior so after I set my panels I'd be done with framing, insulating and finish work, I'd probably be onboard with the idea but not with the labor intensive method shown in this video.
@marlaplunk2833
2 жыл бұрын
@@Steve-cn5up You can be done with framing once the SIPs are installed. I don't know why these guys chose to add furring, but it's not necessary - although they didn't explain why, and it might be necessary .. lol. Even SIPs made of pressure treated lumber designed for basements don't need furring.
@bjadvanturz
2 жыл бұрын
@@Steve-cn5up I've done a lot of research. Not sure what company does that, but they do use smartside on the outside.
@bjadvanturz
2 жыл бұрын
@@marlaplunk2833 They just took another 4+ " from the interior space. Totally not necessary to use the furring strips
Well damn, why don’t you do a proper job of it 🤣🤣 Awesome build, not a beat missed 👏🏼 🙌🏼
Hello from belgium, non profit organisation we would like bild 30 little SIP home(25m2,each) for Homeless people but we don't find any factory to this job, can you help us???? NPA/ A Roof for the futur". Dominique