I have a sips-built house. This is definitely the way to go!

@EcoPanelsofTennessee

Жыл бұрын

Thank you Juanita!😀

@truebengalsfan

17 күн бұрын

Did it make a huge difference in energy savings ?

That's pretty cool that the outlet locations are pre-installed. I was actually wondering about that. Look forward to more videos.

@EcoPanelsofTennessee

2 жыл бұрын

Thank you... we have a decent library of videos explaining other parts and processes. That said, we try to get a new one out each week. Appreciate your interest and comment!

We built a SIP house in Montana. it was airtight and cut our heating bill very much. the downside was condensation building up on the windows in the winter. (think of it as living in a Styrofoam beer cooler). We had to install a ventilation system to draw out the moisture. the house stood up to high winds, loads of snow, and kept us cool in the summer months. We did all the work ourselves; it is not that difficult to do if you follow the instruction manual. If I ever decide to build another house, this is the way I would go.

@EcoPanelsofTennessee

4 ай бұрын

You make a great point that we discuss with customers. Indoor air quality is something to plan and monitor in a high-performance home. Humidity mitigation is a significant part of this.

@Dadwithallthecool

12 күн бұрын

If you do your research on SIPs homes you will find that it is a system, part of that system is HRV Systems. The structure is so tight that without “ makeup air “ you will deplete( not totally ) oxygen, build up CO2 and moisture. I built a foam insulated house about 15 years ago and learned this through experience. When we turned the cooktop ventilator on it would draw smoke from the wood stove at the other end of the house. Also the attic space was always “ damp “ and we had to condition the space. In conclusion, more pros than cons, just do your research .

can you please walk us through the steps to order a kit or shell for building a house? Do we bring in a floorplan? Do you have floorplans?

@EcoPanelsofTennessee

Жыл бұрын

Ideally, you would provide us a floor plan, then we’ll do an estimate from there. With a deposit, we’ll do a panel layout with electrical and any other structural requirements. Once those are as complete and approved, a production deposit allows us to make the panels. Generally within just a few weeks (lead times will vary) we can deliver your panels. Thanks for the question. Give us a call and we can walk through it in more detail.

Would these kits work for a two story building?

@EcoPanelsofTennessee

Жыл бұрын

They sure do. Our SIPs are used on 2 story homes quite frequently. Thanks for the question!

Where can I get the kits?

@EcoPanelsofTennessee

10 ай бұрын

We ship all over. www.ecopanelsoftn.com or give us a call at 800-356-2396

How does the price of these compare with the stick built homes?

@EcoPanelsofTennessee

11 ай бұрын

Great question. Generally, they cost more up front. Payback in reduced utilities is just within a few years, then every month after that is money saved. This video might help address your question as well: kzread.info/dash/bejne/qGF8xc6yopncmqw.html Give us a call and we would be happy to discuss your project and potential costs.

Do you have cement board?

@EcoPanelsofTennessee

2 ай бұрын

We do not currently work with cement board or make CSIPs. There are several in the industry that do this. It's much more common with EPS cores. Our poly-fill method of making panels creates some issues working with cement board. Thanks for the question.

Hi. I live in the UK and SIP buildings are relatively unknown. I've bought a house made of 200mm panels, 15mm osb with 170mm PU insulation. The builders have fitted 150 x 200mm glulam lintels above all windows even if there are no loads bearing above them. Is that what you do in America? If possible I'd like to send a video showing what they've done but I need an email or something so I can send it.

@EcoPanelsofTennessee

6 ай бұрын

We commonly incorporate LVL headers above door and window openings. It depends on the header height and width, often time regardless of the load above. We would not want to comment on a product we're not familiar with, as all will engineer differently. It is normal though here. If your builder or the manufacturer is recommending it on your project, I'd suggest following that. If you have concerns, an engineer in your area may be able to better comment.

@1012ube

5 ай бұрын

wow, putting an LVL in a non load bearing wall? get your wallet out, huh?@@EcoPanelsofTennessee

No link to website

@EcoPanelsofTennessee

11 ай бұрын

www.ecopanelsoftn.com - Thank you for the note. This is one of our earlier videos and we need to clean up the description. Appreciate the heads up!

please email the assembly manual

@EcoPanelsofTennessee

2 жыл бұрын

Jeff, we'll need your email address, which I don't recommend you post here. You can find our email address on our website... www.ecopanelsoftn.com OR you can complete our Builder form and get it via email almost instantly. Just complete the form here: www.ecopanelsoftn.com/builder-info/

NEED A GARAGE. THIS CAN WORK. NEED A DORMER TOO. ?????

It’s not a plug. It’s a receptacle.