Fantastic tones, congratulations for the video, it removed many doubts I had

@ThePedalGuy

2 жыл бұрын

Thanks.

Really appreciating your channel, I recently bought the Amp Stomp II and your videos have helped immensely. As you mentioned, you can easily max out the DSP, a great idea for a future video would be how to integrate the Stomp with other pedals. I'm planning a small pedal board using my Stomp, Strymon BlueSky and an OCD. I'm thinking to place the OCD in front of the Stomp and then the BlueSky in the Stomp effect loop. It would be great to understand some of the pros and cons of this type of setup.

Very informative video Pedal Guy❗💯

@ThePedalGuy

2 жыл бұрын

Thanks

great tutorial thanks!

@ThePedalGuy

2 жыл бұрын

Thanks

AMAZING!!!!!! 💪😉

@ThePedalGuy

2 жыл бұрын

Thanks

Great video. Thanks for uploading. I’ve been gigging with the Ampero into a Headrush speaker. I was So impressed that I have one of these on order. I look forward to more videos in the future and was wondering, will you be doing a video on using the soul press 2 and Ampero control with this unit?

@ThePedalGuy

2 жыл бұрын

Thanks for watching. I plan to dive deep into midi with the Ampero control with the stomp.

Would be great if you do a sound comparison video. Ampero being used as a pedalboard ( effects unit only)into a real amp and cab vs Ampero into frfr speakers, also showing how to connect it and set it up for both options.

@ThePedalGuy

2 жыл бұрын

That’s a good idea. I’ll look into it

@allboutthemojo

2 жыл бұрын

@@ThePedalGuy thanks

Thanks man!

@ThePedalGuy

10 ай бұрын

You’re welcome

Great video 🤘🏻, pls tell me more About the Quick Access Para switch use, how to set 2 different patch level on one patch🙇🏻‍♂️ thx a lot

Great video as usual Scott! Just wondering whether you've tested the Digital Octa effect and, if so: - Can you comment on whether there's any noticeable latency/delay (particularly with chords)? - As this is quite a DSP-heavy effect, does it seem like many other blocks can be added to the same preset? Thanks so much or all your informative videos!

@ThePedalGuy

2 жыл бұрын

Thanks. I haven’t worked with that effect yet. I’ll have to check it out in the coming days b

@johnong2655

2 жыл бұрын

Latency is really important. So far none of the KZreadrs has address that point

Another thing… Almost every video/comment on the net seems to say “turn off cab if running into a cab..” I AM running my ampero into clean power and into a “real” 2x12 custom cab. I’ve had multiple modelers, multiple line 6 power cabs, frfr speakers, and now a $1500 custom cabinet. I understand the “theory” of I don’t “need” an ir or cab in my chain since I’m actually using a cab…but it’s always sounded thin, with ANY modeler…helix, headrush, ampero, UAFX, irx, tonex, etc. I guess I’m just curious… I feel like I’m doing something wrong! I can’t imagine how anyone can get a good sound running from a modeler into a power amp and then cab…I’ve tried….even with a “real” cab modelers seem to always be “incomplete” if you don’t add an ir or cab after. Your thoughts? Other viewer comments please? I know “if it sounds good, it is good” I’d love to save a slot and not use memory for a cab… How are y’all getting a good sound and saying “you don’t need a cab block because you’re actually using a cab!” I don’t get, it’s maddening!!

@saulobento4405

Ай бұрын

Dude, I do the same thing and it always bothered me hahahaha. I use an ampero 2 stomp loading amp+cab sim into a joyo bluejay in my home and i just run The same patches with an IR for gigs, works fine for me, but youre right, it would be nice to save some memory. Sorry for my english, non english speaker here hahah

@pbosche

Ай бұрын

@@saulobento4405 thank you!!! Your English is GREAT! I would have never known!

Trying to make sense of all the possibilities. While I know there is no right way… Please tell us why reverb and delay after the cab and not between the amp and cab?

Great video! I'm curious about why is not good to have a patch level at 100. In my scenario, if I don't set it that way my guitar is buried in the mix as the other guitar player uses a Marshall JCM900 (not simulator).

@IshredGuitar

2 ай бұрын

Set it to what your ears tell you.

@jlostboy

Ай бұрын

@@IshredGuitar that's for sure, however I was looking to understand a bit more about why that recommendation. I set all my patches to max volume.

Can you route the effects chains to the outputs separately? So you can run a dual amplifier setup with a different chain going to each.

@ThePedalGuy

2 жыл бұрын

As far as I understand Yes you can! I just haven't tried it yet.

I’m a little late to the party but they just dropped the price so here I am. You mentioned a workaround for squeezing more processing power out of the Ampero 2 when some effects are grayed out. Can you point me to your video that has that info? Thanks

Can you switch between 2 amps in this Ampero? Like using one for clean and second one for over drive and lead?

I don't understand why you'd place a delay and reverb after the cab. I noticed in a lot of the factory patches they do the same but that's not something anybody does with physical equipment, or I never have anyway.

@ThePedalGuy

Жыл бұрын

LOL. That’s just the way they do it with the modelers. The verb and delay come after the amp and cab.

@ukmanthailand

Жыл бұрын

@@ThePedalGuy Okay thanks. I guess I should have stuck to valve amps like the old (ish) fart that I am. :)

Hi, I wonder if Ampero II can open patches created in Ampero or Ampero one?

@ThePedalGuy

2 жыл бұрын

Not sure.

Can the Volume pedal be placed at the end of the chain?

@ThePedalGuy

2 жыл бұрын

Yes

can you do all things on the device itself that youre doing on the computer software

@ThePedalGuy

2 жыл бұрын

Yes

I hope someone here knows how to make MIDI BABY 3 work on this pedal. Ive spent hours to know avail. It isnt working

@ThePedalGuy

2 жыл бұрын

Haven’t used one.