BRUSHLESS POWER!! “CHEAPEST” Traxxas Stampede 2wd
Автокөліктер мен көлік құралдары
In this video I install a Brand NEW Brushless Power Sysyem in the “CHEAPEST” Traxxas Stampede PROJECT !!
Amazon Affiliate Links -
Onyx 1/10 Scale 4 Pole Brushless Motor (4000kv) with 70 amp Esc with Ec3 Connector -
amzn.to/3gbponc
Hot Racing Medium Duty Servo Saver (Blue) -
amzn.to/3T4K2ny
Traxxas Stampede 2wd XL5 (BLUE) (Battery and Charger Not Included) -
amzn.to/3AfJzYG
Traxxas Stampede 2wd XL5 (RED) (Battery and Charger Not Included) -
amzn.to/3dkYgkd
Traxxas Stampede 2wd XL5 (GREEN) (Battery and Trickle Charger Included) -
amzn.to/3bT6nnN
Amain Hobbies Links -
Traxxas Stampede 2wd XL5 (BLUE) (Battery and Charger Not Included) -
www.amainhobbies.com/traxxas-...
Traxxas Stampede 2wd XL5 (RED) (Battery and Charger Not Included) -
www.amainhobbies.com/traxxas-...
Traxxas Stampede 2wd XL5 (PINK) (Battery and Trickle Charger Included) -
www.amainhobbies.com/traxxas-...
Traxxas Stampede 2wd XL5 (GREEN) (Battery and Charger Not Included) -
www.amainhobbies.com/traxxas-...
Traxxas Stampede 2wd XL5 (BLUE) (Battery and Trickle Charger Included) -
www.amainhobbies.com/traxxas-...
Traxxas Stampede 2wd XL5 (ORANGE) (Battery and Trickle Charger Included) -
www.amainhobbies.com/traxxas-...
Traxxas Stampede 2wd XL5 (RED) (Battery and Trickle Charger Included) -
www.amainhobbies.com/traxxas-...
Traxxas Stampede 2wd Xl5 (ORANGE) (Battery and Trickle Charger Included) + Bumper with Working LED Lights -
www.amainhobbies.com/traxxas-...
Traxxas Stampede 2wd XL5 (GREEN) (Battery and Trickle Charger Included) + Bumper with Working LED Lights -
www.amainhobbies.com/traxxas-...
Traxxas Stampede 2wd XL5 (PURPLE) (Battery and Trickle Charger Included) + Bumper with Working LED Lights -
www.amainhobbies.com/traxxas-...
Traxxas Stampede 2wd XL5 (BLUE) (Battery and Trickle Charger Included) + Bumper with Working LED Lights -
www.amainhobbies.com/traxxas-...
Traxxas Stampede 2wd XL5 (RED) (Battery and Trickle Charger Included) + Bumper with Working LED Lights -
www.amainhobbies.com/traxxas-...
Пікірлер: 140
Banggood still sells a brushless setup for $43 that works awesome in the Bandit/ Stampede 2wd. You can also upgrade the transmission, but that runs $90 . I didn't care for the transmission and went back to the stock one. Brushless is the way to go with a 2wd.
@RCKnockout
4 ай бұрын
Cool, thanks
I though I was watching a Chris fix video when you hit your intro😂
@RCKnockout
3 ай бұрын
It’s not the first time I heard that lol 😂
Finally I have been waiting for a long time my slash is going to go brushless soon
@RCKnockout
Жыл бұрын
Nice!
love videos like this not many videos of the stampede around!
@RCKnockout
Жыл бұрын
Thanks! That’s true
I have this brushless system in my 2wd rustler. Runs out pretty good.
@RCKnockout
Жыл бұрын
Yeah It seems to be a good system
like the new logo 💯 epic upgrades hopefully it's super fast now
@RCKnockout
Жыл бұрын
Thanks bud! Yeah it should be a ripper!
Digging the new logo! Very cool.
@RCKnockout
Жыл бұрын
Thanks brother!
I saw the title and i was like "yeeeeah". Always good content!
@RCKnockout
Жыл бұрын
Appreciate it!
Good video! I just got this system have not tried it yet but does look promising. Under the foam in the box it came in there is 3m double sided tape for the ESC in the on off switch and two zip ties.
@RCKnockout
Жыл бұрын
Thanks! It’s a good system….just watch your gearing…cause the high speed optional gearing seemed to strain this system quite a bit so I geared mine down to 14/83
Nice logo. Cant wait for a drive and a speed test on that stempede
@RCKnockout
Жыл бұрын
Thanks! Stay tuned for those videos!
I still have my onyx 100 charger that I got when I was like 8 for my bandit lol
@RCKnockout
Жыл бұрын
Nice! Good to hear it’s still working!
Nice new tag, I like it, when I clicked the video I was like who’s dis, 😅 stay safe happy RCing my friend
@RCKnockout
Жыл бұрын
Thanks bro! Yeah I’ve been wanting to change my profile pic for awhile….still doing some rendering on this logo
@joseywilds3133
Жыл бұрын
👍🏽 keep up the great work, happy RCing my friend
@RCKnockout
Жыл бұрын
@@joseywilds3133 thanks bro!
I like the onyx combo. Have it in a ecx amp crush. Mine is the 3300kv. It's a wheelie machine on 3s
@RCKnockout
Жыл бұрын
Nice man! How’s it holding up?
Only other cheap upgrade I would recommend is a 9Imod servo. I have 2 coreless and 1 brushless 45kg. Both are good and strong. The coreless is about $30-35 the brushless is $45ish. They are definitly durable as I have ran the cheaper coreless in my truggy for a few races testing it out. It didnt seem like enough power for the truggy, it pushed like a dump truck. However, I realized it was just the front diff had lost all its fluid. I filled it up and it turned hard again. Still yet to use the brushless, but I am already sure of there durability cause the coreless uses the same gears. Great cheap upgrade system, 4000kv should be pretty fast on 2s geared proper.
@RCKnockout
Жыл бұрын
Thanks for the tip! Usually when I replace a servo I just buy a cheap metal geared one….I’ve got a few extra sitting around
Great wrenching vid 👊
@RCKnockout
Жыл бұрын
Thanks!
cool video and upgrades
@RCKnockout
Жыл бұрын
Thanks bro!
@islandrc-duke1972
Жыл бұрын
@@RCKnockout 🙂👍
Good video 👍🏽
@RCKnockout
Жыл бұрын
Thank you!
Nice work can't wait to c how it rips. I bet its gonna wheelie all the time.
@RCKnockout
Жыл бұрын
Thanks! Yeah it’ll be a wheelie monster
@arcaderacer586
Жыл бұрын
I added wheelie bars to both Mine and set them on the lowest setting so it just wheelies a little bit off the ground.
I need help figuring out a charger for my RC car it's a t-60 plug-in I only get $30 to spend and I'm looking for a Amazon cheap RC charger
@RCKnockout
Жыл бұрын
The ones I’ve used cost a bit more than that….usually $50-$80….I’m sure there is something out there in that price range that works well though
I used wall plugs and changed to longer screw to lift the esc tray higher so I can fit in 3s battery in there. I’m sure you will try 3s on that new brushless system👍 thanks for sharing
@RCKnockout
Жыл бұрын
That’s a good idea….but the 3s still won’t fit under the strap though…..
@MechanicallyFun
Жыл бұрын
@@RCKnockout I use Velcro battery strap
@RCKnockout
Жыл бұрын
@@MechanicallyFun do they make one or did you have to cut into the chassis?
@MechanicallyFun
Жыл бұрын
@@RCKnockout I just run Velcro strap around the battery and underneath the chassis. It does hold the battery in place
It’s easier if you remove stabilizer braces to install servo saver. Just fyi I have the original Stampede two of them that I need to completely change to fm done with am! 🤘🏼✌🏼
@RCKnockout
Жыл бұрын
Thanks for the tip! lol 😂
Hello, I am very curious how he drives it! Can you possibly put subtitles in your videos? We love looking at you, but our English isn't that good. Greetings from Germany
@RCKnockout
Жыл бұрын
Greetings…I would but I feel like that would be very distracting for most viewers if the channel
@joeloalexis9030
Жыл бұрын
@Prizel Tate you can turn subtitles ‘on’ right on the screen
I just bought that exact same combo but I’m not figuring out how to bind it but, so can you do a video showing how to make it run please?
@RCKnockout
Жыл бұрын
You should be able to calibrate the transmitter and it should be good to go….no binding necessary….you might wanna go through the programming though….it shows how to do that in the instructions
My RC shop salesman is Traxxas store airport hobby shop in Minot North Dakota would charge me $78 for a charger for a battery charger to sell venom battery is what I'm working with I am kind of new to that never worked with one at all so the first thing I think of is the swamped electronics to Traxxas only which that would be a lot more money which I do not having
@RCKnockout
Жыл бұрын
Yeah the Venom stuff is pretty good…a lot of the batteries I have experienced seem to work as well as, if not better than the Traxxas batteries at a cheaper price too
Can you use a stock radio controller ( that you hold ) with this setup? Thanks..!
@RCKnockout
Жыл бұрын
Yeah you can
About a put this same moter and esc in my stampede 4x4 😎
@RCKnockout
Жыл бұрын
Nice! Should work well!
Hi, how’s the Onyx brushless combo system holding up on your stampede so far? Any problems or issues? Thanks
@RCKnockout
Жыл бұрын
No it’s been holding up pretty good….it does seem to get a little hot on 3s and the battery doesn’t seem to last super long….but aside from that no issues
There is another cheap upgrade that makes a huge difference and that is 15mm wheel hex adapters. It widens the stance just enough to help the flip overs. it really helps and its only a $10 upgrade and only takes about 15 minutes.
@RCKnockout
Жыл бұрын
I’ve never heard of 15mm hex adapters…..I’ve heard of 14 and 17….what wheels do they go with?
@arcaderacer586
Жыл бұрын
@@RCKnockout Nolan here is the video I found that showed how well they worked. Check it out. i think your stampede viewers will all like this mod kzread.info/dash/bejne/lIGWm9iAgLmYY6g.html
@RCKnockout
Жыл бұрын
@@arcaderacer586 I’ll definitely take a look! Thanks man!
@rckingracer
Жыл бұрын
Name of them for Google?
@arcaderacer586
Жыл бұрын
@@rckingracer 12mm to 15mm hex extension adapter
hi what is the Traxxas brushed Stampede 2wd stock pinion size
@RCKnockout
4 ай бұрын
I honestly can’t remember
this should be good, I upgraded both my 2wd stampedes w cheap power systems, all cheap brushless motors seem ok,but the ultra cheap esc's are 50/50 at best. I wound up finding hobbywing esc's on aliexpress for around $30 50A &60A and they handle 3s batteries and work well. I assume this esc from Horizon Hobbies should also work well. it very well could be a hobbywing oem esc like the ones they make for redcat.
@RCKnockout
Жыл бұрын
Yeah hopefully it’ll hold up well! 🤞
11:44 I was thinking you could just modify the side part so you could just screw it is or just supper glue the side part so you could screw it in
$25 more you can get the spektrum motor and esc which is a beast
@RCKnockout
Жыл бұрын
This systems been holding up really well
Hi I am planning similar conversion with 4000kv. Would it have more speed and performance with stock gearing?
@RCKnockout
Ай бұрын
Yeah it’ll definitely give you better performance than the stock brushed system
@SuperKozykozy
Ай бұрын
@@RCKnockout thank you, hopefully I wont mess it up. 😂 Subscribed 👍
@RCKnockout
Ай бұрын
@@SuperKozykozy you’re welcome! Appreciate the sub!
Can you program the ESC??
@RCKnockout
8 ай бұрын
Yeah! There’s a few things you can change in the Esc
Are kidding this was and kind-of the one of the top 5 electronics for R/C before Spectrum, and HW started to really take over. They where in everything R/C before. I would say it was around 2013- 2016 around
@RCKnockout
Жыл бұрын
Still never heard of them….they must be under Horizon ownership now
Can you make the 2wd Stamp a 4s powered truck?
@RCKnockout
Жыл бұрын
Yeah you could
do you think this can fit in a touring car if yes how fast do you think it will go
@RCKnockout
Жыл бұрын
It might be able to fit in a touring car….not sure how fast it’ll be it depends on the gearing
@Danny.trx4sprt
Жыл бұрын
@@RCKnockout what gearing and battery do you think I need to go to 50+
@RCKnockout
Жыл бұрын
@@Danny.trx4sprt I wouldn’t be able to tell you….the tire size is a big factor
@Danny.trx4sprt
Жыл бұрын
@@RCKnockout oh alright well thanks
@RCKnockout
Жыл бұрын
@@Danny.trx4sprt yep
Is the esc waterproof?
@RCKnockout
Жыл бұрын
Yeah
i like the new channel logo
@RCKnockout
Жыл бұрын
Thanks!
@stinkmod2297
Жыл бұрын
@@RCKnockout would you know by any chance why the servo of my truck isnt turning the wheels much or at all?
@RCKnockout
Жыл бұрын
@@stinkmod2297 not sure could be a lot of different things…..could be the servo itself or something in the steering bellcrank
@stinkmod2297
Жыл бұрын
@@RCKnockout nvm some how i turned the knob on the controller all the way down
@RCKnockout
Жыл бұрын
@@stinkmod2297 gotcha…No worries
So, Nolan, are you feeling tempted by the new Traxxas XRT? 🙂
@RCKnockout
Жыл бұрын
Nope….I don’t like rc cars with wings or spoilers ….that’s why I don’t like my EXB
What kinda battery did you use can u send a link?
@RCKnockout
Жыл бұрын
Yeah I use ones very similar to these amzn.to/3FIRsrm
@TimothyIvanov648
Жыл бұрын
What type of adapter would I need if I’m running the traxxas battery?
@RCKnockout
Жыл бұрын
@@TimothyIvanov648 you would need a Traxxas Female to Ec3 Male Plug adapter
@TimothyIvanov648
Жыл бұрын
Thanx
@RCKnockout
Жыл бұрын
@@TimothyIvanov648 yep
Anyone have a link to those wheels?🙏
@RCKnockout
Жыл бұрын
Mounted or unmounted? Cause I had a very hard time finding these wheels unmounted
@Geezuhs92
Жыл бұрын
@@RCKnockout mounted preferably. I have a stampede too and they look pretty good on the truck
@RCKnockout
Жыл бұрын
@@Geezuhs92 ok you can’t buy these pre-mounted with these tires I can get you links to some similar options though amzn.to/3iwodA0 The first ones are made for the Stampede 4x4 and Rustler 4x4…..they should mount right up on a 2wd since they have the 12mm hexes amzn.to/3EVmsnA The second link is the same wheels as mine with a slightly different Sledgehammer tire….very similar tread design….disadvantage to these is you’ll need some 17mm hex adapters to put these on you Stampede
@Geezuhs92
Жыл бұрын
@@RCKnockout Awesome! Thank you bro🙏🏽
@RCKnockout
Жыл бұрын
@@Geezuhs92 you’re welcome!
i have ran deans on 6S with no problem
@RCKnockout
Жыл бұрын
I won’t run deans plugs past 2s….they start having issues…I’ve had them trigger limp mode, thats usually the most basic problem…sometimes they melt to the point the solder comes off….or it melts to the battery connector…..I’m very surprised you haven’t had any issues….especially on 6s
@maartencoppens7312
Жыл бұрын
@@RCKnockout they have got warm 2 timestamp but when I cleaned them they where fine again for a month or 6
@RCKnockout
Жыл бұрын
@@maartencoppens7312 interesting…I just don’t really like them
@maartencoppens7312
Жыл бұрын
@@RCKnockout but now I changed to xt90. Cause my oldbattery died
@RCKnockout
Жыл бұрын
@@maartencoppens7312 xt90’s are way better than deans plugs….
hey idk if u would be interested but I'm looking for a cheap xl5 for a slash frame I got Im still getting parts but I need an esc I have a motor but if ur interested in selling the xl5 esc for cheap hmu
@RCKnockout
Жыл бұрын
No….I don’t use the hcg chassis anyhow…already got two of them sitting around….thanks anyways bud
@theLyzhendricks
Жыл бұрын
@@RCKnockout no u misunderstood me I wanna buy the brushed xl5 esc I have a chassis I'm trying to build
@RCKnockout
Жыл бұрын
@@theLyzhendricks oh I gotcha….I think I’m gonna use it in another rc
What happened to your youtube logo?
@RCKnockout
Жыл бұрын
I changed it
you can go cheaper get the surpass hobby combo s
@RCKnockout
Жыл бұрын
That’s true….you could always find something cheaper…this seems like a good system for the price though
For the same price u could've done the power up program from traxxas
@RCKnockout
Жыл бұрын
I’m pretty sure that’s around $125….so that not the same as $79.99
@lunchbox3346
Жыл бұрын
@@RCKnockout they say on the website it's about half of a new 1
@RCKnockout
Жыл бұрын
@@lunchbox3346 you’ll have to look that up….I’m not sure what a new one costs from Traxxas but for the vxl3s and 3500…I’m pretty sure it’s $125….I looked it up before I bought this system actually
Don't over heat it too much the bearings aren't that good I've went through that motor in my 2wd slash
@RCKnockout
Жыл бұрын
Good to know, thanks!
@carlosmagana3371
Жыл бұрын
@@RCKnockout you want to keep it under 150 degrees
@RCKnockout
Жыл бұрын
@@carlosmagana3371 ok thanks