finally someone shows me what I needed to see

He is my go to for now on I own a 95 f150 xlt 5.0 302 v8

Did you go from auto hubs to manual?? Great video!!

Not sure if you know and didn’t show it but you may have missed a bearing on the back side of the spindle there is a bearing that guides and centers the stub axle it is notoriously forgotten and neglected.

Great video, my son just bought a 96 and 8m helping him with it. That's alot of work. I just did pretty much same thing on my f150 c, I know how much work it is😬. Love these old Broncos

Thanks for the video, great job!

I jus now saw your video you are the one I've been looking for your my man for now on I have a 95 f150 XLT 5.0 V8 4wheel dr

Yes the dual battery would be great!!

That's it. I'm going to Florida to buy my next truck. I had to torch out both my lower ball joints on my bronco. Had to burn out the pivot bushings and cut off the bolts. Dang rust. And I'm only in Arkansas!

@autoexistence8902

6 жыл бұрын

Definitely a huge plus having relatively rust free vehicles. Only surface rust mostly on my Bronco.

@thisguy9835

6 жыл бұрын

i live in buffalo ny and my bronco is rusted to all hell

7:46 yoooo what is that inner fan thing?? Edit* also the manual bearing greaser thing is sweet

Looks pretty much the same as my 79f150. Just did ujoints and bearings. Have all new brake bits ready for next project. w00t.

good job I have a 94 bronco here in Veracruz Mexico

sub'd for a nice bronco! I just picked up a 96 last week, and I have to go through the front end and replace everything you did too. This video will come in handy!

This helped me because your steering knuckle isn't like the other 99% of Bronco's on youtube. It's like mine and mine is a '94. What year is yours? I'm guessing '93-'96 somewhere.

Good shit!!

hey bro did u go back and put the dust shield? or just left it like that?

Love The Music...

No dust shields?

Anybody else want to see how he did his dual battery setup?

@jigsawpulse1139

5 жыл бұрын

Walker Ashcraft dying to see it

@jigsawpulse1139

5 жыл бұрын

Yes maaaaannnn

Great video!! One question if you might know, what torque on tightening the five (7/16” fine) nuts on the spindle hub ?

I want your bumper hah. good looking bronco

Hey man great video. We’re you able to buy all of these components in a kit or did you have to piece it together? Looking to do something similar to my obs f150

looking for a knuckle and hub for it

It was like I was there spending time with you... and your dog... Good stuff!

I wanna see anything he got .he rules

No specs? What the heck+

You should do a rough country 4” lift

cylinder change is great idea, how do i figure out what wheel cylinder can work for mine? i have 96 bronco 5.0 4x4. so i just match the inlet thread size?

@autoexistence8902

4 жыл бұрын

Same axle as the 5.8 so an 92-96 f350 wheel cylinder will fit. Note that you will need a proportioning valve to ensure your brake bias is set properly

there is no way you did a full spindle rebuild in 1 day hahaha it would probably take me a week just to get one done. great video, you get me to subscribe!

Man this is a great video I have the same bronco I leave in Mexico I have a problem eon my truck left side when I go into a dirt road to my house I have a serious heavy noise I took it to several Mecanic no one can fix it what are you suggesting I will appreciate your input ANDRE Pascal

Um was I the only one concerned that he loosened the axle nut and lug nuts before even lifting the truck? just me?

What size socket did you use to remove the locknut for the bearings?? Got to narrate better

Thanks for the video, but a little question: Torque wrench for the lock nut is 162 to 205 pounds ok?

@autoexistence8902

6 жыл бұрын

In the instructions provided with the hubs it said 175-205 lb ft.

@cibermedicina

6 жыл бұрын

ok thanks a lot

Took my 95 bronco to Feerstone also. Won't do that again lol.

Whats is the part # for the bushing the upper ball joint fits into on the knuckle?

How did you find a instruction manual for this?

Question what socket did you use to get the spindle nut off? I can’t find one that fits. Thanks

@autoexistence8902

5 жыл бұрын

Just google ford spindle nut socket. It’s a castle type socket. They sell them at pretty much any auto parts store from anywhere between $10-25 👍🏻

@tylerpigninelli2928

5 жыл бұрын

Auto Existence Ok, thank you

Good video. I wouldn't recommend driving it that much prior to an alignment though. Shouldve gone straight to a shop after components were replaced

So the rear wheel cylinder bolts right on?

@autoexistence8902

5 жыл бұрын

Yes

@mikefu7744

5 жыл бұрын

Do you feel like the wheel cylinder made a difference?

@autoexistence8902

5 жыл бұрын

Almost too good of a difference, now the rears lock up more than the fronts so I will be installing a brake bias knob

@mikefu7744

5 жыл бұрын

@@autoexistence8902 did you install brake bias???

@autoexistence8902

5 жыл бұрын

Not yet, it’s on the agenda

Did you get all your parts from Jeffs Bronco Graveyard?

@autoexistence8902

6 жыл бұрын

No actually, a mix of eBay, and rockauto.com

can you please upload new vids!!

Hey was fellow Bronco. You in Denver

Where did you get the upper ball joint sleeve

@autoexistence8902

4 жыл бұрын

It’s an adjustable camber caster bushing. You can find them any auto parts or amazon or eBay

@danielcousins4083

4 жыл бұрын

Auto Existence thanks

Have to say I have enjoyed your bronco maintenance videos. Kudos! The music in this video was perfect. Before seeing this, I first watched a video from a different contributor and it was a hot mess! Every inch of the underside was covered in years or muds and rust. I could barely make out the nuts and bolts he worked with. Made me anxious just watching! Then I stumble upon your truck and the underside looks like it has been driven merely a year or two from the factory! I have one question though....did you forget to reinstall the brake disc dust shield?

@autoexistence8902

3 жыл бұрын

Yes I didn’t reinstall the dust shield because I damaged it so I just run it without it

Good job bro but what’s the kiss on the dog 😡😡