bronco 4speed to 5speed conversion made easy
Автокөліктер мен көлік құралдары
by request from a subscriber. here is an overview of how I converted our factory 4 speed overdrive trans to a more modern 5 speed overdrive out of a 90's f150.
notes. I forgot to mention but you will need to cut and shorten the linkage from the transfer case shifter to the transfer case but this is as simple as measuring, cutting the linkage and running a quick weld across it. if you don't have a welder then a piece of flat stock and a drill press will quickly make you a replacement
Пікірлер: 7
Great explanation
Muncie is the way to go
Do you know if the transmission is the M5OD or the ZF5. Considering swapping my 85 f150
@junkinjames6345
25 күн бұрын
This was the m50d but I have swapped the zf5 into a short bed f150 of the same vintage.
@gamer-gaming-chair8198
24 күн бұрын
Was the process mostly the same or are there some differences to look out for. I was thinking about the Mazda tranny but I’d rather have a stronger ZF5.
@junkinjames6345
23 күн бұрын
@@gamer-gaming-chair8198 the only issue I ran into with the zf5 was the clearance between it and the forward gas tank on my short bed. The speedometer cable interfered and caused It to flex at an extreme angle. It failed shortly o After. I routed a new cable differently and it held up fine afterwards. Otherwise the same process. Redrill holes for the cross member, connect the clutch. Out the shifter in and figure out driveshafts.
@gamer-gaming-chair8198
21 күн бұрын
@@junkinjames6345 thanks, I might swap it one day, but till then it’ll do