Thank-you! You've saved me lots of time, broken parts, minor injuries and the neighbours from my loud expletives.

@wisguyz5

3 жыл бұрын

66666⁶979yyy7y8⁸97888yu8u7y8788888yyyyyyyy7uuu9yuu788889788⁸ 222²yrt57ut564vtbw

This guy is a hero. Never take this video down. It has helped thousands of ZX-14R owners across the world.

by far, one of the best videos I've ever seen for any diy(er). installing my CT exhaust on my ZX14R was a whole lot easier. actually learning how to remove the fairings without breaking any of the tabs on them was best.

Thank you so very much for publishing this video! It saved me a lot of grief learning the ZX14R jigsaw puzzle of the fairings! Great service to the riding community!

Wow! This is one of the best DIY videos I have viewed. Clear and concise. Thank you.

I love how comprehensive this tutorial is thank you to both Ben and Brock.

Extremely well presented video! I watch this every time before body work removal just for a refresh. Anyone who doesn't watch a video will without question break something. Thank You!

This video continues to be worth its weight in gold during reassembly this evening.

Thanks for a thorough video! I just used this to install the CT duels without 1 scratch! I've had some bad experiences with local dealers. I love to work on my bike and this made it possible. Thanks again.

It makes such a difference when one is shown all aspects of a process. Great job. Really appreciated...

this video saved me last night

@BrockDavidson

5 жыл бұрын

@alexlexusZXninja - glad to hear, that's why we make them.

@alexlexusZXpredator

5 жыл бұрын

@@BrockDavidson i have to do go and finish the installation tonight since I forgot to put the seals in

@alexlexusZXpredator

5 жыл бұрын

@@BrockDavidson the silicon

the most useful video i've found so far. it's hard enough trying to do it in the dark half drunk even with a guide. i had no hope of getting these fairings off.

Totally invaluable I've got this one saved thank you Brock

Hands down, best installation video I've seen. Great Job, Brock's!

brilliant video much clearer than any manual helped me loads thank-you

brilliant video saves a load of hassle and possible lug braking!!

Amazing video!! This sold me on the brocks exhaust system!! It will be my next purchase. Now I need to get some overtime!

This video was extremely helpful and gave me the confidence to do this job myself, and I'm certainly no mechanic. Biggest problem for me was the radiator - there is not enough play in the hoses to let it swing forward as shown in the video. Had to disconnect hoses and partially drain the cooling system, that's easy enough. The Brock's CT pipe is a thing of beauty, amazing compared to all the iron that's in the stock system.

@BrockDavidson

9 жыл бұрын

JustsayinAgain Glad to hear this helped!

I bought the exhaust and pc5 complete system and installed it last week. This video was very helpful putting the exhaust together. really was not all that hard. The pc5 on the other hand was a nightmare. If you have the exhaust watch this video first. It will make things a lot easier.

I got the exhaust and it is fucking great loud and proud and my 14r woke up a lot with it too...

So detailed and informative. Loved it. Thank you.

Very well done.Thanks for this guide.

This video is just so well done. Great job guys. I refer and re-refer to this whenever I need to remove my fairings.

@BrockDavidson

4 жыл бұрын

Thanks! 👍

We have added a link to our ZX-14R information page in the video description. It contains dyno charts.

Very well done video and informative!!

Very clear tutorial, thanks.

Great great video. Very clear instructions and demonstration!

Thank you so much, fairing removal first i did okay, Brock slip on excellent.

Now THAT is a very well done instruction video. Very professional!

@BrockDavidson

3 жыл бұрын

Thank you very much!

Kawasaki got this young man a week's worth of OT just to remove stuff. Another week of OT to put everything back. Geesh!!!...Talk about the 12 task of Hercules! Young man did an outstanding job and made it look doable without damaging anything.

VERY well done!! Thanks a bunch.

Very well explained. Thank you...for your time......

Extremely detailed instructional video 👍 absolutely top job 👍👍

Thank you, very good video!

Thanks very much .. Nicely done ..

Thanks for the details video. 👍👍😁

Excellent Video!

Remember the good old days, when all you had to do to put on an after market exhaust, was unbolt the OEM pipes and bolt on the new pipes? I replaced the stock exhaust on my 1970 CB-750 in less than 30 minutes. On this bike it takes longer than that just to see the stock exhaust.

Excellent tutorial. Well done!!

Excellent tutorial

Very profecional boy! congrats!!!

Fantastic video, nicely done and thank you, this is very appreciated.

@BrockDavidson

2 жыл бұрын

Glad you enjoyed it!

You will need extensions to get the middle header screws. I used a long and a short with slim pivoting head ratchet.

Very nice thanks bro

i cant wait till i get mine for my zx10r

Looks better 🖤🖤

thank man good job 👍

Great video, one thing I have noticed those when doing a header and exhaust is , and this can save a lot of extra work is before we bolt all the fairings and body work back up is check start that thing and make sure the headers are all sealed up and have no leaks. I know and see that those inlets are all individuals and it's more than likely we don't have that issue very much ,but it does happen so saying that it's just never a bad idea and can save some time and effort. Remember to wipe those black pipes down because oils from our hands burn into them when hot. "LOVE ALIEN HEAD".

Best video ever.

AWESOME Amazing Fantastic

wish you had a system for a 89 zx10. got a kerker on there now

OMG!!!! You saved me 700 bucks!!!!!!!!!!!!!!!!!!!!!! Thank You

It is reasons such as this video, the Service aspect in general when dealing with anything Brock's related, The Quality & just how thorough Brock & his team are! There's not a lot of people with the knowledge, skill & experience Brock has and even fewer that are willing to do 1 single thing unless getting paid for it. A public link that anyone can use at any time! This just ended 2 weeks of frustration for me (I took my fairings off my Gen. 2 a few weeks ago & they did not line up properly since & have been driving me more berserk than I usually am!) This is just more validation to support Brock's! The support they have provided me in the past several years (Gen. 1, now Gen.2!!!!) I can't put a price on it & if I could, it would most likely be just 1 more thing out of reach instead of something Brock & Team spent countless hours & money on, doing propper R. & D.! To then make public links (constantly & varying models etc. I may add) demonstrates how Brock conducts & runs his buisiness! A complete class act, always giving back, a model for "Service" in what seems to be an endangered species these days when the term "Customer Service" is used! T.y. to Brock & team! Cannot wait to start modding my "new to me" (13' S.E. purchased w/5,400 on the clock & not 1 scratch, knick, or ding, anywhere to be found! Give me 10 mins. Lol) Gen. 2. Great video, many thank's, much appreciation & respect !

@BrockDavidson

4 жыл бұрын

@Brian, a sincere thank you from me personally as well as everyone here at Brock's.

Quite informative...Thanx. However there are some installation tips that could be more in depth. The right side middle fairing for example.

Aweswome instructions by a pro.Gloves?.

Thanks for that. .jus about to replace header gaskets on my 06 zx 14..even though I've only lost a nut and losing power and some oil. .figure if I'm going to go through the hassle of dismantling the plastics might as well change and refresh all! Good tips on safely removing the Ferrings..not in the mood to snap clips and create other problems! Keep them coming. ..any suggestions where I can sorce any unique accessories for my baby?

@BrockDavidson

9 жыл бұрын

Charles, sorry for the late reply. If you go to our website we have all sorts of things for the ZX14. Let us know if you have any questions. For quicker responses feel free to shoot an email to sales@brocksperformance.com.

Can you do a power commander installation on the 2011-2013 ZX-10R? I'd like to see how it's done if you dont mind please^_^ Can you also do the slip on for the 10r as well? Thanks^_^

Do Brock's make anything for 2013 Kawasaki zx6r 636 like exhaust or ecu flashing? Don't seem like there is any performance support for 2013 and up zx6r....

was wonder if a 07 zx exhaust would fit on a 08 zx14?

Now why wouldn't you use hi -temperature copper silicone on ALL pipe seams to stop air leaks

Can you do a video of the installation of the Brock's Performance Noise Suppressor

@BrockDavidson

4 жыл бұрын

It would be a 5 second vid, lol. This should help: bit.ly/2Wf9zzt

the side faring on the zx14r 2016 se seems to be screwed in.

@richardcranium9663

5 жыл бұрын

Ya and also have an o2 sensor in the exhaust

how much horse power moore now?

would you recommend putting a glass wrap on the header pipes and if not...why not?

@BrockDavidson

6 жыл бұрын

Great question: www.brocksperformance.com/absolutefm/?f=304

This video was great, but i don't have a ZX-14R, lol. I am saving up to buy your full package for my 2014 Hayabusa in March 2016, can you make a video showing how to install a full brock's exhaust on a 2014 hayabusa in detail just as you made this video.it would be greatly appreciated. Thank you!

@BrockDavidson

8 жыл бұрын

+Ammaad Terry the Busa is about the same, except MUCH easier! We made this video because the 14R is so prone to breakage of the fairing prongs. Suzuki did a superior design job, so you won't have that problem. Just consider this a 'generic' assembly video. lol.

my muffler clamps are loose because of absence of gasket in them,its really scary because of loose clamps both of my exhaust pipes are not only leaking but also shaky .my question is,will the silicone gasket sealer will fix my problem or should i use real gaskets? 2010 zx14r

@BrockDavidson

7 жыл бұрын

Our systems are slip together and held with springs, no clamps or gaskets are required. This is the preferred method for race use. Per our instructions, silicone sealant is only required at the headpipe connection. Please contact our technical support staff if you have additional questions. 937-912-0054

Do you have a similar video for the Gen 2 Hayabusa? All I see on KZread now are garbage. This was exactly what I needed, just wrong bike. Please create if you haven’t.

@BrockDavidson

6 жыл бұрын

@Brian - we have a detailed series on the Gen 2 Hayabusa... but it's old school, you will need to read. Cheack out the Hayabusa Chronicles Part 1 and 2: blog.brocksperformance.com/hayabusa-chronicles-part-1/

Dear brock i just recived my exhaust great stuf for my busa 09 stock engine what can i aspect for extra hp with this setup. Thankss

@BrockDavidson

8 жыл бұрын

+Nissy The one those bikes can see a very nice increase (15+ HP!), especially if all of our information is followed. But, you will need our mapping and they are prone to dirty injectors. it's all easy to remedy - please call us for more info. 937-912-0054

Removing the side fairing is one thing, reinstalling it is a whole different game. Just spent 2 hours putting the fairings back together.

How similar would a Gen 1 zx14 be to this? I have a 2006 model. Thinking about getting the alien head full exhaust.

@BrockDavidson

Жыл бұрын

@Diego Garcia - Yes, very similar. FYI: All of our products also have their own individual instructions: bit.ly/3DU59E1

Great Vid and Even Greater Products! Recently installed Full CT Megaphone on my 2012. Install went perfect but there is "0" clearance in between header pipe and bottom of radiator...is this normal or did I "fudge" up?!

@BrockDavidson

8 жыл бұрын

+Rob Jr glad you like the CT. The clearance is close - but it should not be zero. Please call our tech department for advice. 937-912-0054. Ext. 105, ask for Steve.

@rhspencer82

8 жыл бұрын

Brock Davidson Cool Brock! Appreciate the time and quick response!

Just got a 2020 zx14... 1st “brand new” bike I’ve ever bought. Anyone know the different mods that are and aren’t allowed in order not to void the warranty? I.e. full exhaust vs slip ons vs “don’t touch anything on the exhaust”...

@BrockDavidson

3 жыл бұрын

If you are not in california and don't ride a Harley, warranty issues are typically not a problem. According to the Magnuson-Moss Warranty Act, your warranty can only be voided if an OEM part fails as a direct result of an aftermarket part addition: bit.ly/3n1rVPT

Please tell me the headers don't have to be removed to change the oil filter.

@BrockDavidson

3 жыл бұрын

No removal required.

I'm wanting to put on a pair of 'Two Brothers' mufflers on my existing system without changing the headers. Can I simply remove the original cans and put on the 'Two Brothers' cans?

@BrockDavidson

8 жыл бұрын

+Daniel Campbell that would be a question for them.

How much more power do you get with a full system vs one of your slip ons?

@BrockDavidson

6 жыл бұрын

ROMEO please check our stock to Brock series for a complete explanation

I like the DIY video. However, WISH he would started the bike an rev the engine several times;-)

@popscyclep8084

4 жыл бұрын

Right?????

sounds stupid but can the cans be separated from pipes (never played with slip ons before old fella can anyone help?

@BrockDavidson

9 жыл бұрын

Rick, sorry for the late reply, if you are referring to the stock pipes then no. The stock mufflers and elbows are all one piece. I hope this helps, let us know if you have any other questions. For quicker replies shoot an email to sales@brocksperformance.com.

I'm in the UK. Can you tell me the easiest way I can get hold of one of these awesome exhaust systems for my Zzr1400 please? I'm going to junk the full akro for one of these...

@BrockDavidson

3 жыл бұрын

We ship worldwide from brocksperformance.com

@stevecambers3190

3 жыл бұрын

@@BrockDavidson Thank you

This system does it fit on a 2023? Please help am trying to find it 🙏🏻

@BrockDavidson

Жыл бұрын

From what we understand, the systems do fit the 2023 ZX-14R's ---but we have not confirmed this in house, so 2023 is not yet reflected on our site: brocksperformance.com/exhausts/ultra-light-stainless-full-systems/kawasaki/zx-14-r/

Can you put this system on and no other upgrades????

@BrockDavidson

8 жыл бұрын

If you desire... but without our mapping, performance, drivability and fuel mileage will suffer.

How did you get the middle header nuts off there killing me

@BrockDavidson

6 жыл бұрын

Use penetrating oil, let it sit for a while and use a proper extension and knuckle which lets you apply maximum torque. If they are just too stuck, remove the radiator and try attacking them straight on.

How much different is this video for installing this exhaust on a 2011 zx14?

@BrockDavidson

5 жыл бұрын

The exhaust install is exactly the same. The fairing fasteners are different on the Gen 1, and easier to navigate without breaking the tabs.

@jsoutdoorz7390

5 жыл бұрын

@@BrockDavidson thank you..i just got my full system today.. waiting on all new colors then put it all together.. yall have a blessee week.. thanks again.. great service...

what is that little plug in on the handle bars ? my uncle has one on his , but he doesn’t remember what it was called . 😭

@BrockDavidson

2 жыл бұрын

Bar ends?

@lilswavo2x

2 жыл бұрын

@@BrockDavidson no sure , it’s like a plug in , kill switch type thing .. like the bike wont start unless you plug it in ..

@BrockDavidson

2 жыл бұрын

Wrist kill switch, aka "Dead Man's Tether". It turn's the engine off if the rider leaves the bike prematurely. It's required to race in most drag sanctioning bodies, for safety.

@lilswavo2x

2 жыл бұрын

@@BrockDavidson thanks bro 😎

Hey Brock! Can a gen 2 full exhaust be installed on a gen 1?

@BrockDavidson

Жыл бұрын

That depends. Usually no...but we made mods to the pipe and added a Gen 1 spacer kit in 2008 that allows ours to work from 99-21. No clue what other brands did or didn't do.

@Mario98c

Жыл бұрын

@@BrockDavidson Thanks for answering. 99 to 21? What I meant was if a 2012 to 2022 zx14r alien head full exhaust will fit a 2007 zx14. Thanks again!

@BrockDavidson

Жыл бұрын

That one is a bit tricky. Please call 9379120054 and Steve at extension 203 can help you.

what about the 2 hoses on the right side fairings

@BrockDavidson

8 жыл бұрын

+John Russell no fluids need to spill during this install. You can work around the hoses, in place.

@johnrussell7385

8 жыл бұрын

+Brock Davidson also is the plug supposed to fit flush? if so how do you manage that in the tight fit? what do you probably for leverage

@BrockDavidson

8 жыл бұрын

+John Russell sounds like you might want to speak to our tech support staff 937-912-0054

@johnrussell7385

8 жыл бұрын

+Brock Davidson just missed the 2 calls that was really fast lol

What Torque wrench do you recommend?

@BrockDavidson

4 жыл бұрын

Snap-on...or NAPA. It depends on budget.

@rockyp3917

4 жыл бұрын

@@BrockDavidson Thank you

I forgot to add, i am going to buy the "Shortmeg exhaust system".

Question for the group. I had my an Alien Head Full System installed on my ZX14 22. The engine light came on, and I was told that the OEM O2 sensor did not fit. How can I resolve that? Is there an adaptor or a cable that I need to purchase?

@BrockDavidson

2 жыл бұрын

ECU flash is main resolution these days.

@BrockDavidson

Жыл бұрын

Because our systems are designed for an 18 mm 5 wire O2 sensor. We have adapters available if you want to screw the O2 sensor back in, but we're not sure why you would want to do that since all it does is make the bike run poorly.

@BrockDavidson

Жыл бұрын

If you have a power commander, the tune to match the pipe is free through our map support system.

@BrockDavidson

Жыл бұрын

@@ZX14RHedgehogWorkshop this is what you need: to run your stock O2 sensor: brocksperformance.com/oxygen-sensor-custom-bung-kit-18mm-boss-with-12mm-tapped-plug/ and please read this also: blog.brocksperformance.com/faq/should-i-leave-my-stock-oem-o2-sensor-installed/

@BrockDavidson

Жыл бұрын

Email me your order number. bmail@brocksperformance.com

I thought this vid was great!

I have a aftermarket 330 swingarm can this still fit over that?

@BrockDavidson

6 жыл бұрын

It depends on how your swingarm is fabricated. For the really big tire kits we typically install our 4-2-1 Sidewinder or our TiWinder: www.brocksperformance.com/TiWinder-Blue-Full-System+I390027+C133.aspx as they always fit.

@MrJoshcc600

6 жыл бұрын

Thanks for the reply, I had a full alienhead in the past on a busa that got stolen. Just a bit timid about cutting the fairing but the deep sound of the alienhead is what I miss most

@MrJoshcc600

6 жыл бұрын

I also see you have a race baffle and a street baffle option for that tiwinder

@BrockDavidson

6 жыл бұрын

Correct - the street baffle works well to about 250 RWHP and has a fantastic sound/tone. The race baffle is used in 250+ race/nitrous applications. It will not slow the bike, even compared to no baffle at all...in fact most go faster with the baffle in place.

@BrockDavidson

6 жыл бұрын

Check out our guide to cutting your bodywork: www.brocksperformance.com/Instructions/OTHER/992027.pdf

I waited all this time to hear it? No ham sandwich...

whats with springs?

@BrockDavidson

3 жыл бұрын

Ease of maintenance.

@rocketman9160

3 жыл бұрын

easy to nick to

Bummer watched the entire vid....waiting to hear the new exhaust, didn’t happen. Guess I gotta buy the mod.?

@BrockDavidson

4 жыл бұрын

Sorry - try this: kzread.info/dash/bejne/gnh31ZiJkZXWY6w.html

@popscyclep8084

4 жыл бұрын

Brock Davidson No prob Sir. Thank you! I’ll check it out.

ANDDD NO SOUND OF THE NEW EX ?

@BrockDavidson

7 жыл бұрын

This is a 'How to' installation video. Sound can be found in this performance vid: kzread.info/dash/bejne/gnh31ZiJkZXWY6w.html

Seeing all this i know i would have to this by the pros...

Do you have a vid like this for a Hayabusa?

@BrockDavidson

3 жыл бұрын

We don't.

@busavalley8695

3 жыл бұрын

@@BrockDavidson on my Gen 1 busa there was a part the size of my hand that was removed. There were 4 small plates connected to it. I just received the alienhead for my gen 2 and feel comfortable installing the exhaust but I dont know about that part, if it needs to be removed or not. I didn't see the removal in your instructions with the exhaust or on any videos.

@BrockDavidson

3 жыл бұрын

@@busavalley8695 that was the Gen 1 Busa pair valve and block off caps. The Gen 2 Busa has the pair integrated into the valve cover. The pipes install the same.

@busavalley8695

3 жыл бұрын

@@BrockDavidson thank you, should the pair valve be removed or can it stay?

@BrockDavidson

3 жыл бұрын

@@busavalley8695 we block them with this kit: brocksperformance.com/pair-block-off-plates-hayabusa-08-20/

Where can I get a set of Brocks for my 2018 ZX 14 I live in Wentzville Missouri is there a supplier close by or do I need to order one from out of state if so who can I order one from #torah57mitch

@BrockDavidson

2 жыл бұрын

www.brocksperformance.com

I'm pretty handy with mechanics. Remind me not to do this operation,especially after my 3 Martini afternoons. Matter of fact, I shall pay you to do this.

@BrockDavidson

6 жыл бұрын

lol. Our own staff kept breaking the tabs off ($$$$!), so we decided to make a vid. The company was miles ahead in the long run :)

The only thing missing from the video was a sound demo

@BrockDavidson

3 жыл бұрын

kzread.info/dash/bejne/qWSolNyNmpysdtY.html

They did not fire it up!!