This is what sets Colin apart. He isn’t afraid to revisit the basics! Every day, folks are coming into woodworking, as a hobby or a trade career, and these things are best done fresh! Outstanding video!! I enjoyed watching immensely! Keep them coming Colin!!

I remember back in the 80s I was in 5th grade, how Colin was demonstrating planing a bit angled so the blade bites a bit better, was exactly how we were taught at school how to plane.

I must confess I’m a block plane addicted, I believe I have 5 or 6 block planes each a little different for specific tasks. Take Care Colin and to the wood work web family. Merry Christmas.

Love this channel as it keeps the art 🎨 alive. CNC Machines has almost killed it in the UK 🇬🇧

Thank you for the reminder of how much a block plane used for various tasks in wood fitting. I have used my trusty Stanley low angle block plane on site and in the shop for 40 odd years but a couple of years ago I treated myself to the Veritas DX 60. I have to say what a treat it is to use. It is so comfortable, well balanced and the adjustments to the blade are quick and easy to dial in due to the precision machining. The apron plane you have there is probably the same quality and also comfortable to use.

Thanks for this video and for sharing your experience

Thanks so much as always Colin. Merry Christmas!

Great tutorial. I bought a Record 220 back in 1983 and still use it on most projects. Still my go to plane! Regards James One Handed Maker

Thanks much Colin!!!

Fantastic tips, Colin! Thanks a bunch!!! 😊 Stay safe there with your family! 🖖😊 Merry Christmas and happy new year!

Thanks Colin

solid tips...every one thank you and happy holidays

Colin, you make it look so easy. I'm having a hard time mastering the hand plane, either too deep of a cut or not enough. Guess thats the difference between a pro like yourself and a wood butcher like me.

Wow. I learned a lot of tricks. This was a winner.

Great as always Colin, I will watch that sharpening video for sure! Happy Holidays

Very helpfull vid. Thx Collin.

Some really great idea's 💡

You always come up with great ideas very interesting

Oh, he says, is THAT how you set the blade depth, after decades of guesstimating. Thank you Colin!

Excellent video

This was so helpful! Thank you sooo much!! Could you maybe do an intro to planes? Different kinds, uses and care/dialing in? Happy Holidays sir!!

Thanks Colin from Bill inNova Scotia. I always enjoy your entertaining and informative tips. 👍

Terrific video Colin! Happy Holidays to you & your family! 👍👍🌲🌲

Thanks, and MERRY CHRISTMAS AND HAPPY NEW YEAR, keep the viedos coming and the greatvtips

This is almost therapeutic

Thanks a lot

great info

Nice Video, thank you.. And nice watch 👍🤗🤗

Alright already I'll buy one! :)

Yayyy nice tips. Wishingvyou very happy and more successful 2023 😎💛

Nice video just in time because yesterday i bought my first block plane. I am from Europe and this type of plane is not very popular there where i live but i picked up nice vintage one.

thanks

👍👍👍 Thanks

Merry Christmas Colin!

10:18 Block planes take a nice smooth chunk out of your knuckles just like they do with wood! Watch your knuckles!

What about adding a few wipes of wax or light oil on a rag to the bottom of the plane so it glides smoothly on the surface of the wood.

Thanks for this one, great tips but the sitting of the plane on its base is purely a choice. No harm will come from sitting it on a bench. Merry Christmas!

Thanks, Colin, for another excellent teaching videos. I like your plane. Can you tell me the manufacturer and model?

love your videos..........I watched one about left-handed tape measures............ I've searched the internet and haven't found any.....Where can I find one..................

Hi excellent presentation. Could you name your favorite brand and also could you show how sharpen the blade. Thanks

Can you use this tool on a piece of composite decking?

Thank you Colin! How do I find that sharpening video you did years ago. I have that same little jig, to get a 25 degree I just ordered a magnetic angle finder hoping that’ll help. 🤷🏼‍♂️

Tearout on the cross grain? The tenon has no long grain on the end.

Where is the link for the German block plane?

What is you opinion about Rali planes from Switzerland?

There is no link for the German block plane

If I am looking into getting my first block plane what size should I consider? Mostly for Rounding over edges and other small jobs

I need to plane an edge / side of the plank, but suspect it'll split at the end as it's against the grain. What tool could i use to do this?

I always struggled with manual planes. I only plane for installation purposes, like door slabs. So I use electric ones. Thanks for the lesson.

@fredparsons5134

Жыл бұрын

Same here, could never do well with my planes. I watched a video by 3x3 Tamir and she showed how to sharpen with diamond plates and an angle guide. So much better and fast to put that micro bevel on. Really enjoy it using them now.

Better off planning the long grain first. FYI

Great video. Do you camber your block plane blade? I just got my LN block plane and getting it setup

@jimweisgram9185

Жыл бұрын

Traditionally, you do not camber the blade, that would be fine on a smoother plane such as a number 4. BUT, you can if you want to use it like a smoother for taking off a thousandth of an inch or so. All you really need is after sharpening the blade with your finest grit, give a few strokes with pressure on one corner, and then the same strokes with pressure on the other corner. Usually I just smooth with a #4. First of all I use my block plane for a number of tasks that need a heavier cut. I use my smoother just for smoothing. Second it can take too much time to smooth a surface with the narrow blade. But I might want to use it for making a small box.

I'm starting to get tools to start woodworking. This is very helpful. How do you tell if a used block plane is a good one or just a cheap one?

@davec3689

Жыл бұрын

Always buy the best, which is not always the most expensive one, and you won't be disappointed. Buy the best and you will only have to buy it once. It will be an investment. It will last you a lifetime. Do your homework since you are buying the tool you will use for the rest of your time woodworking.

When I do a roundover I always use a router for speed and accuracy.

My old block plane doesn't have a depth knob. I have to tap it forward. Takes forever to adjust. Not recommended. Get one with a depth knob.

👍

How about using a block plane that doesn't have all the added features shown here. A plane that only has a tightening swival. No forward-backward knob and no mouth closing devise, or side poivoit sid eto side leveler. Show us how you set the plane to cut a very thin slice off a piece of wood. I say this because it is very hard to set the cutting distance on these type of planes, but if setup right, they work equally as well as a more expensive plane with all the add-on features. It's very hard to set these type of planes u8p to cut a very micro-thin slice off the wood stock

Colin I have been watching your videos and benefited from your videos for years, but I personally believe that you are a little off base with this one, first off, Rob Cossman, Paul sellers and many other fine craftsman have busted the myth of not laying your plane down onto its sole, obviously no matter how your laying down your tools hopefully your doing so with care and common sense, but as far as damaging a plane blade certainly not, in fact laying them down on there side or otherwise can actually knock your plane blade out of square, Many plane blades are actually setup with the slightest of a tap on the side with a soft face mallet or the heel of your palm. Also the other tip of placing your block plane or any highly crafted hand tool with the finest of surface finish usually lapped within microns of measurement between the jaws of a rugged vice …bad idea and good way to distort a fine hand tool… I mean heck if your not caring enough to lay your plane down on its sole with some caution .your plane is really going to love the serrated jaws of a vice. Sorry Colin, but you have and can do better. Cheers

@thomashverring9484

Жыл бұрын

I stopped watching after the "always lay your plane on the side".

And it cuts better at an angle because............. and this doesn't work on regular knives because............

Don’t lay your plane on its side unless you want to knock it out of adjustment.. sitting it directly on a wooden workbench is not going to hurt it.. this laying on its side came from worship lore.. not going to hurt anything..

Old wives tales not laying a plane down

My adventure with woodworking started with Woodglut.