I'm a widow & just found my husbands planner. After blowing the sawdust out I read the manual. I allways used our Hand planners so I'm a little Nerve's using this. I watch many DIY videos being self dependent & love my work shop. Your Video is the BEST!!. Extremely" easy to understand & your very educational. Now I feel confident thank thank thank You😉

@diyforknuckleheads

2 жыл бұрын

Fantastic Paula! Well done on dusting off the planer. Once you get the hang of it, it's a very handy little machine 👍😁🇦🇺

@Frednelvlog

2 жыл бұрын

Can I use the tools of your husband thank you

@josepalacid

2 жыл бұрын

Let's go, all us nerds. Forget fear, keep respect.

@josepalacid

2 жыл бұрын

@@diyforknuckleheadsI knew you are a great teacher. Now I know you are very nice too.

@diyforknuckleheads

2 жыл бұрын

@@josepalacid Cheers mate 👍😁🇦🇺

Love videos like these, I can tell my wife to watch it and she'll understand why I need a new tool.

@diyforknuckleheads

3 жыл бұрын

Hahahahhahaha....Smart mate......very smart 👍👍

@adventureawakened

3 жыл бұрын

Mark, you are a god !!!! Ha ha ha ha ha ha

@kamangumukuka4212

3 ай бұрын

Hey amazing guy ...do you have any videos on how to correctly calibrate a mitre saw ?? I'm really convinced YOU would explain it better !!👍🏾

For a 2 year old video, and your still responding to comments, just goes to show how dedicated you are! I'm currently renovating our 5,000sq ft home. Doing everything DIY as much as possible. Your videos (and other creators) have gotten me through so many tight spots..thank you for what you do man! Keep up the great work! Cheers from Wisconsin USA! The cheese state 🧀🐄🧀🐄🧀🐄🧀

@diyforknuckleheads

Жыл бұрын

Cheers for that Richard! Appreciate the feedback mate. Yep still responding as you guys are the reason l keep going. It's a great way of building a positive community 👍👍 Good luck with the Reno's mate and thanks for taking the time to watch. 😁 Wisconsin sounds like my kind of State......gotta love a good cheese 👍😁🇦🇺

@ch-yq5yn

8 ай бұрын

You didn't cover at all what the application of a planar is. Methods or uses and why.

@charliebrady3751

6 ай бұрын

@duke1281 You would feel right at home here - no shortage of cheese! 😊

This guy is seriously amazing, why didn't i find him sooner, just like a father with good advice :)

@diyforknuckleheads

3 жыл бұрын

Thanks Zack.....great to have you on board mate 👍😁🇦🇺

@thrills120

3 жыл бұрын

@@diyforknuckleheads thanks Dad!

@diyforknuckleheads

3 жыл бұрын

@@thrills120 😂

@chimene3851

3 жыл бұрын

Agreed I want to be adopted by this guy 😂

The best, most comprehensive video I’ve ever seen on the use of a power tool. Great job!

@diyforknuckleheads

3 жыл бұрын

Thank you for the comment Lee! Much appreciated mate 👍🇦🇺😁

I’ve been watching wood working videos for years and this stuff is too notch. Especially the clamping advice. I’ve been struggling with my limited space, but those pipe clamp ideas are incredible

@diyforknuckleheads

2 жыл бұрын

Cheers mate! Glad you liked the video and thanks for the feedback 👍😁🇦🇺

That part using the clamps to make a vise was pure genius. Haven't seen anyone else doing similar. 💯

@diyforknuckleheads

3 жыл бұрын

Cheers Bernie! Glad you liked it mate and thanks for the feedback 👍👍😁🇦🇺

@burningbernie

3 жыл бұрын

@@diyforknuckleheads always found your contents very informative and practical. Thanks mate. Now let me have some of that tea. 😑

@diyforknuckleheads

3 жыл бұрын

@@burningbernie Have a nice cuppa mate 👍👍😁

I came for the planer info...but the clamping options were gold. Subscribed for the Dad Jokes.

@pipmill7076

3 жыл бұрын

Of you have a wood tap you can use bolts and tap some handles to make your own vices. Only wood and not heavy metal but for a project and a useful cheap trick pretty cool.

@ghostrider511000

3 жыл бұрын

the clamping options were good ad Vice (another dad joke)

@tubalcain1

9 ай бұрын

I UNSUBSCRIBED because if the dad jokes...

@travelwell8098

3 ай бұрын

Haha... yeah... exactly!!

The most straight-forward, simplest, and easy to follow ever! Thank you very much for the wonderful instructions.

You had me at "anatomy lesson" excellent, so glad I found your channel! New subscriber! VERY well done!

"And the award for the guy who you would most like to be your neighbor/buddy goes to Uncle Knackers!" I watch a lot of woodworking videos and always watch your videos. the videos are awesome, the info is killer and the explanations easy to understand but your personality makes it fun too. thank you !

@diyforknuckleheads

Жыл бұрын

Cheers mate! Glad you like the vids and thanks for taking the time to watch. 👍😁🇦🇺

Perfect timing on this video. I recently bought my first electric hand planer and then this video popped up.

@diyforknuckleheads

3 жыл бұрын

Google is listening Chris 😂😂 Good luck with the planer mate....it's a great little tool 👍 Thanks for watching 👍😁🇦🇺

Great Advice!!! Also the one for magnets to detect hidden nails in the wood... as simple as amazing!

@diyforknuckleheads

3 жыл бұрын

No worries Alessandro! Glad you found the video useful mate and thanks for watching 👍😁🇦🇺

What a great idea for a quick makeshift leg vice - great tip knackers - or should it be quackers!! You bloody legend! Keep em coming mate

@diyforknuckleheads

3 жыл бұрын

😂....thanks Matt! Gotta say the vice works really well mate...give it a go 👍 Have a great weekend 👍😁🇦🇺

I'm not a beginner, but it's always a good thing to see how/what a other person is doing or think about it. It's never too late to learn something.

@diyforknuckleheads

3 жыл бұрын

👍...Very true Peet.....thanks for watching 👍😁🇦🇺

@agentstarkk

3 жыл бұрын

I love your attitude, too many people in our trade think they are too good or too experienced to learn something new.

just stumbled on your vid, Great ,love your approach Ive been working wood for 40years and found this refreshing thanks from the UK

@diyforknuckleheads

3 жыл бұрын

Thanks Paul 👍 Appreciate the comment mate 👍🇦🇺😁

This was definitely informative, I have a power planner but was not knowledgeable of it’s correct use. The tips regarding the blade flipping also was an eye opener! As far as the use of clamps, that is brilliant! Please record more tips like this. Thanks!!

@diyforknuckleheads

3 жыл бұрын

Glad it was helpful Les and thanks for watching mate....much appreciated 😁👍🇦🇺

LOVE your jokes !! As a old guy doing woodworking for 50 years, I find your videos very informative. I'm just not that great at teaching people . Going to show some young DIY's neighbors your channel, you will teach them such great knowledge and terrific tips. Thank you so much !!!!!!

@diyforknuckleheads

2 жыл бұрын

No worries Rod! 👍 Thanks for sharing the vids mate....really appreciate it 👍😁🇦🇺

Came to learn about a planer...but those tips about using pipe clamps as a holdfast or leg clamp were pure gold. Thank you, sir!

@diyforknuckleheads

2 жыл бұрын

My pleasure mate! Glad you liked them and thanks for watching 👍😁🇦🇺

Shane your videos make wood working and related tools use so much easier. Your presentation and explanations suit amateurs like my self to improve our skills without rushing or jumping in to quickly. Thank you and keep it up.

@diyforknuckleheads

2 жыл бұрын

Awesome! Thanks for the feedback Paul....it's much appreciated mate! Cheers 👍😁🇦🇺

@dotmyles6381

2 жыл бұрын

@@diyforknuckleheads Further to this Shane I bought the IRWIN clamps via Amazon, got a couple of pieces of pipe and now have a couple of various sized vices for similar use to your video, excellent and again my thanks.

First video of your I've watched, well done sir. I'm still new to wood working and understand the need for straight pieces. I've been using a router table I built but a hand planner looks like it can be quicker set up. Like anything I just need to practice with it. The section on using pipe clamps was huge, justified getting them ...

@diyforknuckleheads

3 жыл бұрын

G'day Steven....glad you found the video useful mate 👍 Thanks for watching 👍😁🇦🇺🎄

Pipe clamp vise was the coolest thing I learned in this one!

@diyforknuckleheads

3 жыл бұрын

Cheers mate....glad you liked it 👍😁🇦🇺

@davidelliott5843

3 жыл бұрын

I’ve seen “sash cramps” which cost £Mega for what they are. But pipe clamps are reasonable. Thanks for the heads-up. 👍

Just wanted to say how useful this video has been for me, I bought an electric planer about 10 years ago, to planer a single door, did that and it has sat in its case on the shelf since as I wasn't sure how to use if for much else - this video has really helped me understand what it does and how to use it well. I've got into some small wood working tasks during 'lock down' and watched so many youtube videos where they have these amazing workshops, your videos are great in that your setup is not dissimilar to my own - a work bench and some basic power tools - and I feel like I can do what you're showing. Thanks for the videos.

@diyforknuckleheads

3 жыл бұрын

Thanks for the feedback Peter. I keep my shop fairly simple as that is the audience that l'm looking for....nothing to fancy here mate 😂 Have a good one mate 👍😁🇦🇺

I am happy to accept the demonstrator as my guru in wood working jobs. Thanks a lot.

@diyforknuckleheads

3 жыл бұрын

Thanks mate! I appreciate the comment 👍👍😁🇦🇺

Thank you for this video, specially for last part demonstrating how to use Pipe clamps.

@diyforknuckleheads

3 жыл бұрын

No worries at all Arresha! Glad you found it helpful and thanks for watching 👍😁🇦🇺

Great video!! I've been doing woodworking, both professional and DIY, for 50 years. I've never ever seen the tricks with the pipe clamps through the table top or the legs. It just goes to show you can still learn stuff every day. Thanks for the great video. BTW... don't quit your day job just yet. You'll starve to death if you rely on those jokes to put food on the table.

@diyforknuckleheads

2 жыл бұрын

Hahahahha...WHAT......that was one of my best jokes Steve!! Thanks for watching mate 👍😁🇦🇺

Such a nice guy you seem to be! Great tips and great personality. Thank you!

Simple, precise, informative and NO NONSENSE. I love the vise clamp. Thanks for teaching low cost alternative.

@diyforknuckleheads

3 жыл бұрын

No worries Shailesh! Glad you found the video useful mate 👍🇦🇺😁

@IanFosterServices

3 жыл бұрын

You lost me at the duck joke!

Best damn accent in whole Australia ❤️ Can't get enough of it :) The tricks with the pipe clamp are nice too!

@diyforknuckleheads

3 жыл бұрын

👍...Cheers Nick 👍😁🇦🇺

@neville132bbk

2 жыл бұрын

Re the accent...he gives the lovely Rita Panahi a run for her money.

you're a great teacher, thanks for the tutorial, grateful Pom

@diyforknuckleheads

3 жыл бұрын

Cheers Ray 👍.....Glad to help mate 👍😁🇦🇺

I love your way of presentations. Thanks for sharing all of these tips.

@diyforknuckleheads

3 жыл бұрын

Thanks mate....glad you like the vids....l appreciate the feedback 👍😁🇦🇺

This was just the video I needed! I really appreciate your explanations regarding safety. I’ll definitely check out some of your videos.👍☺️

@diyforknuckleheads

3 ай бұрын

Thanks mate! 👍😁🇦🇺

Great tip Knackers, I wish I'd seen this before I tried using one a few years ago, I gave up and went and bought a hand plane. Thankyou for sharing.

@diyforknuckleheads

3 жыл бұрын

No worries Stuart! Glad to shed some light on the machine mate 👍🇦🇺😁

Have you had a budget increase Unkle K? Two pencils? One looked brand new!!!!!! As always informative and entertaining in equal measures. Keep up the great work.

@diyforknuckleheads

3 жыл бұрын

Hahahahahhahaha.....pencils are a premium in my place mate...having two is unheard of😂😂 Thanks for watching mate 👍😁🇦🇺

Very well explained! Thank you!

@diyforknuckleheads

Жыл бұрын

Thanks James! Glad you found it useful mate 👍😁🇦🇺

thank you 10000 times!..all your videos has great contents and has been very2 helful for beginner diy carpenter wannabe like me! cheers

@diyforknuckleheads

2 жыл бұрын

My pleasure Andrew! Glad l could help mate and thanks for watching 👍😁🇦🇺

Great tips... keep em coming Knackers!!

@diyforknuckleheads

3 жыл бұрын

Thanks Clayton!! Glad you liked them mate and thanks for watching 👍😁🇦🇺

This is EXCELLENT! I'm comfortable with most power tools, but these planers have always scared the hell out of me. Now I need to use one for scarfing plywood, and I feel a lot better about it thanks to your clear, sensible presentation. Thank you!

@diyforknuckleheads

2 жыл бұрын

You're very welcome Chris! Glad you found the video useful mate and all the best with the planer 👍😁🇦🇺

@rubo1964

Жыл бұрын

planer is whole lot safer then circular saw,table saw ,angle grinder reciprocal saw

Clamping tricks are AWESOME! Thanks

@diyforknuckleheads

3 жыл бұрын

Yeah they work really well Jared 👍👍 Thanks for watching mate 👍😁🇦🇺

Thank you !

I am about to plan a couple of doors tomorrow and it’s one job I suck at. This video couldn’t have come at a better time 👍

@diyforknuckleheads

3 жыл бұрын

Good stuff Joel! All the best with the doors mate 👍 Let me know how you go 👍😁🇦🇺

@silversurfer233

3 жыл бұрын

@@diyforknuckleheads hi buddy, what's the brand of blue pipe clamp that you use in this video? The link is for a different clamp that looks not as good for what I need. Thanks for sharing!

@arpie2081

3 жыл бұрын

@@silversurfer233 They look like Irwin pipe clamps

@diyforknuckleheads

3 жыл бұрын

@@silversurfer233 Mate, mine are Irwin Clamps suitable a 3/4" Pipe. They, unlike a lot of other pipe clamps don't require a threaded end on the pipe which was really appealing to me. I did a search on Amazon, found the same type but it was for a half inch pipe which to be fair is probably OK. The ones l linked to are a very popular model and will do the job for you perfectly. Thet just need a threaded pipe. Hope that makes sense 👍😁🇦🇺

@silversurfer233

3 жыл бұрын

@@diyforknuckleheads thanks for the reply, I will get a set of each as they will be "good to go! "

Thanks for the vid, and I appreciate the emphasis on safety! Nothing infuriates me quite as much as woodworking videos that demonstrate unsafe practices.

@diyforknuckleheads

3 жыл бұрын

Cheers Patrick....appreciate the comment mate 👍😁🇦🇺

@carterscustomrods

2 жыл бұрын

Yeah, whenever there is a video teaching anything at all, I cringe when they do not show/explain safety practices. It should be a part of every tool or woodworking lesson for newer folks that could be watching.

Excellent on so many levels!!!

@diyforknuckleheads

3 жыл бұрын

Thanks Lin & Ade! Glad you found the video useful 👍😁🇦🇺

Some great basics and some nifty tips and tricks covered in this video. Thanks

@diyforknuckleheads

2 жыл бұрын

Thanks Mark 👍😁

175k subs and you still reply to all your comments. Wow!. Done my part to get you to 176k! great vid by the way 👍

@diyforknuckleheads

3 жыл бұрын

Glad you liked it Dustmeister! I still comment as l think it's the least l can do for someone who has taken the time out of their day to watch one of my dodgy vids and then leave a comment....l really appreciate it 👍👍 Thanks for the sub too....👍😁🇦🇺

Hello my friend. These are really good tips. I learned about Makita planer blade replacement. Thank you for sharing. Big greetings. Yours truly.

@diyforknuckleheads

3 жыл бұрын

No worries at all.....glad you found the video useful and thanks for watching 👍😁🇦🇺

3 жыл бұрын

@@diyforknuckleheads You're welcome. See you. I wish you a good day.

Thank you very much!

Thanks for the set-up advice

@diyforknuckleheads

Жыл бұрын

No worries at all! Thanks for watching 👍😁🇦🇺

your thumbnail reminds me of when I did that very thing and took the tip of my finger off. i was so used to feeling for the blade as a carpenter mind you it was over 35 years ago

@diyforknuckleheads

3 жыл бұрын

Oooohhhh.....you wouldn't forget that mate 😬 Thanks for watching 👍😁🇦🇺

Hello I love u channel ...and I always do your projects

@diyforknuckleheads

3 жыл бұрын

Thanks mate!.....really appreciate the comment and your support 👍🇦🇺😁

Thank you for sharing. I don't have a plainer but I plan to get started with woodworking in the future.

@diyforknuckleheads

Жыл бұрын

No worries at all mate! Thanks for taking the time to watch 👍😁🇦🇺

Very well done! Thanks for this.

@diyforknuckleheads

3 жыл бұрын

👍👍...No worries at all....thanks for watching 👍😁🇦🇺

I bought an electric planer after I watched how you planed that cool big dining table you made, but yeah I was a little afraid to use it at first.. Always love your videos and learn alot from them--thanks for taking the time to put them together for us. And I love that jig--I'll have to make one of those this weekend!

@diyforknuckleheads

3 жыл бұрын

Awesome! Thanks Lisa......Glad you found the video useful 👍😁🇦🇺

@martintheron1386

Жыл бұрын

Hi Lisa,can you give a link to the dining table or a header please

Greetings My King, we give thanks for your information, i do have same planner 😍😘 I love wood working

@diyforknuckleheads

3 жыл бұрын

Hi Bongani....glad you found the video useful mate and thanks for watching 👍😁🇦🇺

@bonganimkhwanazi5097

3 жыл бұрын

@@diyforknuckleheads yes I please send more videos we love wood working and we living with it, it brings food on the tables 😅😎🤗

@bonganimkhwanazi5097

3 жыл бұрын

I did subscribe for more videos please make a plan with us as your subscribers 😁

@bonganimkhwanazi5097

3 жыл бұрын

May I ask something about having a you tube channel, did you you tube pay and how?

@diyforknuckleheads

3 жыл бұрын

@@bonganimkhwanazi5097 Hi Bongani. Because KZread is owned by Google, Google pays you a very small amount of money to play their ads on your video. 👍

Love this guys no frills style. He's just so easy to listen to.

@diyforknuckleheads

3 жыл бұрын

👍.....Cheers Davy! Appreciate the comment mate 👍🇦🇺😁

Omg!! This was so super helpful!! I am a brand new trying to learn woodworking… you have solved so many problems I have because I’m limited in money… Not only did I learn about planers-why I clicked on your video-but, the vice clamp and table clamps ideas… brilliant! I can do that right now with what I have on hand! Love the magnet idea.Thank you so so so much,

@diyforknuckleheads

Жыл бұрын

No worries at all Lora! Glad you found the video useful and thanks for taking the time to watch 👍😁🇦🇺

“Ducks don’t speak English as far as I know” 😂😂😂

@diyforknuckleheads

3 жыл бұрын

😂😂....apparently that's what l've been told 😂 Thanks for watching Jesse 👍😁🇦🇺

@jesshothersall

3 жыл бұрын

@@diyforknuckleheads Just told my partner the 'dad duck' joke, pause of a few seconds then he cracked up, which is what I did when I heard it :)

@diyforknuckleheads

3 жыл бұрын

@@jesshothersall Hahahahaha.....it''s the simple jokes that l find the best Jessica 😂

You missed a bit of self deprecating humor there "the knob on the top of the planer is the person using it, this one is for changing the depth" hehe, great vids :)

@diyforknuckleheads

3 жыл бұрын

Hahahahhaha....I'll have to use that one in the future J.S 😂 Thanks for watching 👍😁🇦🇺

Great guide too, Uncle Knackers. I have a Rockwell from the late 60's with all of the guides for doors.

@diyforknuckleheads

3 жыл бұрын

Steve!!!!....that's genuine antique mate 👍👍 Thanks for watching mate 👍🇦🇺😁

First time I see a pipe clamp! Thanks for the good tips! Henry

@diyforknuckleheads

3 жыл бұрын

No worries VTD! Glad you found something useful in the video 👍😁🇦🇺

Perfect timing Shane, I've just bought one, but you knew that didn't you ? !! :-)

@diyforknuckleheads

3 жыл бұрын

😂😂...using all my psychic powers Jim l just knew 😂. Thanks fir watching mate 👍😁🇦🇺

I thought this was an advertisement and I was waiting for a while for “skip add” Then my husband started watching this with me. Now he owns a plainer. I asked him what he is going to do with it. He didn’t know.

@diyforknuckleheads

3 жыл бұрын

😂.....Classic 😂

@nstl440

3 жыл бұрын

"You never know when you might need it!" Accounts for many tool purchases

@samsama8254

3 жыл бұрын

🤣🤣🤣🤣 even I, i am in my way too.

Much needed intro to planers. Thank you 👌🏽👌🏽👌🏽

@diyforknuckleheads

10 ай бұрын

No worries at all mate! Glad you found the vid useful 👍😁🇦🇺

These types of videos are the best. There are so many videos with people doing perfect work with top shelf tools that were given to them by sponsers.

@diyforknuckleheads

3 жыл бұрын

Thanks Kun! Appreciate the comment mate 👍🇦🇺😁

When I use most of power tool, I place the cable on top of my arm rather than drag it behind the tool. My tip 😜

@davidmarshall2399

3 жыл бұрын

Over the shoulder works for me.

@GeneLake001

3 жыл бұрын

Great idea. My angle grinder lead is about 6 inches (old speak) long now. I’ve cut it so many times. It’s a wonder I’m still upright. Thanks for the tip.

@froglobster

3 жыл бұрын

Good plan thanks

@leehaelters6182

3 жыл бұрын

All of the above, plus sometimes tuck a bight under my belt, with just enough slack to feed my reach.

@agentstarkk

3 жыл бұрын

You guys need to join the 21st century and invest in cordless tools 😉

Great vid and I’m not even gonna lie...I laughed at the dad joke.

@diyforknuckleheads

3 жыл бұрын

😂....you obviously have great taste in humour 😂 Thanks for watching mate and l'm glad you enjoyed the video. Cheers 😁🇦🇺👍

@natejm

3 жыл бұрын

I did as well, and I’m instantly telling everyone I know!

@diyforknuckleheads

3 жыл бұрын

@@natejm Hahahhaaha.....good stuff mate 👍🇦🇺😁

Thank you. Very useful tips.

@diyforknuckleheads

2 жыл бұрын

No worries Hans! Glad you found the video useful mate 👍🇦🇺😁

You are a very caring teacher, remind me of my favourite high school teacher. Thanks a lot

@diyforknuckleheads

3 жыл бұрын

👍😁....No worries at all A.C! Glad you found the video useful and thanks for watching 👍😁🇦🇺

I've owned one of those for 20 years and I didn't know what that v-grove was for...

@diyforknuckleheads

3 жыл бұрын

Now you know Otis 👍😁

I was thinking to myself, why don’t I have a bench vice? I was thinking through every reason till I simply thought, “I don’t have bench.”

@diyforknuckleheads

3 жыл бұрын

😂....That would do it Travis 👍😁

I know nothing before this video about electric planners... learned a lot... also great advice on pipe clamps and homemade vise's... excellent ideas!!!

@diyforknuckleheads

2 жыл бұрын

Thanks for that Robert 👍 Glad you found the video useful mate 😁🇦🇺👍

Great video. Subbed

@diyforknuckleheads

3 жыл бұрын

Thanks Mike....glad you found it useful mate 👍😁🇦🇺

@leonardomigot4040

3 жыл бұрын

@@diyforknuckleheads you are married you had wedding ring

@elsewhere9167

3 жыл бұрын

Same

Clamp things every time. EVERY!! Being clever, I was trying to run a wedge across the cutters with left hand, and holding the plane right hand. Piece shot away and my finger ends went into the cutter. Could see the boney ends etc. Sounds obvious, but working with it every day hanging doors, familiarity breeds contempt. It took nearly 2 years to grow sufficient skin etc to 'look normal' and about another 6 years for feeling to return. I did know better. :0/ These things are NOT forgiving.

@diyforknuckleheads

3 жыл бұрын

WOW! Very nasty indeed Dave.....l agree that familiarity can be a dangerous thing leading to complacently. Take care people 👍

@leehaelters6182

3 жыл бұрын

Mephisto, thanks for your testimony, it will help to keep a least one, and probably many, folks in full possession of their fingers. A mitzvah.

Thanks for posting. Just purchased a Makita planer and appreciate your helpful rundown of the basics and the demos. Well done mate!

@diyforknuckleheads

Жыл бұрын

Glad it was helpful John! Good luck with the planer mate 👍👍

Best power tool video I've seen, buddy! Thank you.

@diyforknuckleheads

17 күн бұрын

Cheers mate! Glad you found it useful 👍😁🇦🇺

Bunnings will be left wondering why are they selling so many planers this Sunday(tommorrow)

@diyforknuckleheads

3 жыл бұрын

Hahahahaha...They probably don;'t have any 😂 Cheers mate 🇦🇺😁👍

A dad joke , well my joke , What do you call a sheep who's had a haircut :- Shaun

@diyforknuckleheads

3 жыл бұрын

😂...I like it mate 👍😁🇦🇺

@spiderbrandt4066

3 жыл бұрын

@@diyforknuckleheads Maaate I was in hospital some time ago and said to the young nurse do you like grumpy old men and she said No and I said nether dose my wife .

Thanks for your education

@diyforknuckleheads

3 жыл бұрын

No worries Andrew....glad l could be of assistance 👍😁🇦🇺

I have been using a hand plane forever and finally decided to get an electric one. Thanks for this. Super helpful.

@diyforknuckleheads

2 жыл бұрын

Glad I could help mate! Thanks for watching 👍😁🇦🇺

In America, women have to be completely self taught. We're treated horribly by men in this field. So your video is very helpful! I appreciate how you explain things.

@diyforknuckleheads

3 жыл бұрын

😊👍.....Thanks for that...glad l could help 👍

@zachs9638

3 ай бұрын

Same for most people..

@j0ker808

Ай бұрын

Uhh, where do you think every other man learns…

If you're going to work with reclaimed wood, invest in an actual metal detector. Aluminum nails will laugh at your magnet and puch your planer in the teeth.

@abj9121

3 жыл бұрын

Better a carbide blade and can cut any nail or almost any screws too.

@cchavezjr7

3 жыл бұрын

Most steel blades will cut aluminum no problem. If it's carbide, even better. It's steel nails and screws that will kill a blade fast.

@leehaelters6182

3 жыл бұрын

@@cchavezjr7, right on. The reason one of my preferred push sticks on the table saw is aluminium with a bird’s mouth. Nothing drastic happens if the blade is grazed, just cuts through it.

Excellent video, I just got a planer as a gift (never used one before) and these tips will really help!

@diyforknuckleheads

Жыл бұрын

Glad it was helpful mate and good luck with the planer! 👍😁

Just came across your channel whilst researching electric planes, instantly subscribed. Thank you for the great information.

@diyforknuckleheads

2 жыл бұрын

Awesome! Thanks Chris 👍 Hope you can stick around for many more vids to come mate 👍😁🇦🇺

Excellent video! Very educational! I will probably never use a planer but if I needed to, I'd feel a bit more comfortable after watching this! Keep up the great work! 🤘

@diyforknuckleheads

3 жыл бұрын

Thanks Andy! Really appreciate the comment mate 👍😁🇦🇺

Thanks . I learned a lot about the planner. Magnet tip , so simple ,nice , but never thought about it.

@diyforknuckleheads

3 жыл бұрын

Cheers Chris!....Glad you found it useful mate 👍😁🇦🇺

Thanking you for this great information. Much appreciated!

@diyforknuckleheads

2 жыл бұрын

Glad it was helpful Petr 👍😁🇦🇺

Pipe clamp vice !!!! Brilliant . Great tool the planner , thanks for tips on eliminating snipe😄

@diyforknuckleheads

3 жыл бұрын

No worries Annie and l'm glad you liked the homemade vice.....works a treat! Thanks for watching 👍🇦🇺😁

So many good tips. Thanks, seriously 😀❤

@diyforknuckleheads

2 жыл бұрын

No worries at all mate! Thanks for watching 👍😁🇦🇺

I love DIY work. This video can help me a lot. Very informative. Thanks for sharing. Stay safe.

@diyforknuckleheads

3 жыл бұрын

Thanks NIkispils! 👍😁

The use of pipe clamps is genius.

@diyforknuckleheads

2 жыл бұрын

Glad you liked them Shaun! 👍😁🇦🇺

Great vid. You have solved a problem I had with the cutting at the end of a piece. Cheers, Carl

@diyforknuckleheads

3 жыл бұрын

Thanks Carl...glad to help mate 👍🇦🇺😁

1. Pipe clamp vice deserves a video of its own. 2. How to avoid streak marks when using an electric planer for face planing as opposed to edge planing?

Always appreciate your approach to these videos. Thanks a ton!

@diyforknuckleheads

6 ай бұрын

No worries at all mate! Cheers 👍😁🇦🇺🎄

Very useful. I often wondered what the groove was for and like many DIYers, reading the instructions is not an option lol. Thank you.

@diyforknuckleheads

2 жыл бұрын

Hahahahaha....instructions???....what instructions! Thanks for watching Vinny 👍😁🇦🇺

This is a great video! Thank you, as a beginner trying to teach myself how to use the various tools for my projects, this is just what the doctor ordered.

@diyforknuckleheads

2 жыл бұрын

Glad it was helpful A.M! All the best for your future projects 👍🇦🇺😁

Some of the best, most clever and innovative ideas I've seen in a KZread video. Great job!

@diyforknuckleheads

3 жыл бұрын

Thanks Edgar! Really appreciate the comment mate 👍🇦🇺😁

Thumbs up for the pipe clamp vice idea. Genius.

@diyforknuckleheads

3 жыл бұрын

Glad you liked it! Thanks for watching Graham 👍😁🇦🇺

Exellant methodical presentation, many thanks.

@diyforknuckleheads

3 жыл бұрын

Thanks Chris....appreciate the comment mate 👍😁🇦🇺

"Don't buy a cheap set of pipe clamps".....VERY good advice!! Harbor Freight taught me that!!

@diyforknuckleheads

2 жыл бұрын

👍

Thank you so much, helpful as always

@diyforknuckleheads

2 жыл бұрын

No worries at all Samantha 👍 Thanks for watching 👍😁🇦🇺