Thanks for the quick explanation! If you want to go even faster you can type the menu number as well (e.g. 26 for offset). That should save you a few more clicks ;-)

@m6stl2010

4 жыл бұрын

Very true my friend, thanks for the comment. 👍

Best video about baofeng for dummies. It makes alot of sense to program only the frequencie and the offset. And the transmiting tone ,if needed. Didnt understood why tou press star key for! One love.

@m6stl2010

4 жыл бұрын

Thanks for the comment! Much appreciated 👍

Thanks for your video! Welcome too!🤝😁👍🌍🌞

@m6stl2010

3 жыл бұрын

Welcome buddy 👍

Fast - accurate - helpful :) Thank you a lot :)

@m6stl2010

4 жыл бұрын

Your welcome buddy 👍

Thank you very much!

@m6stl2010

Ай бұрын

Youre welcome

If you have it set properly in the vfo mode with the proper shift and tone, how do you get it in memory? I clear the memory (menu 28). And then try to write to that menu (menu 27). I find that either the shift or the tone or both is not recorded.

@m6stl2010

5 жыл бұрын

You have to first store the receive frequency first then the transmit frequency second with the shift ctcss, store both frequencys separately into the same memory channel and you should be ok! 👍

Very helpful! Thank you!

@m6stl2010

11 ай бұрын

Welcome my friend 👍

Hello New user to GRMS, using radio Baofeng UV-9G I am connected to my local repeater and I am getting hourly announcement time/weather from repeater. When I do radio check , I will not get any response. can any one help? Thank you Wayne

So the repeater is an "antenne" near the beach thats extends the transmit from peaople far away? is that correct? Totally new in radio Communication.

@m6stl2010

2 жыл бұрын

That is correct my friend, got it in one 👍

@kallekarlsson2181

2 жыл бұрын

@@m6stl2010 Thank you for the reply. In Sweden we call it relaystation.

so easy and what is much better to buy the uv5r or the 82

@m6stl2010

5 жыл бұрын

The uv82 is better than the uv5r without a doubt! 👍

great video - you say to be in frequency mode - how does one place the UV9R in frequency mode? :) mine defaults to channel mode..

@m6stl2010

3 жыл бұрын

Hi thanks for the comment, i havent had any experience with the latest baofengs so i wouldn't know why your radio does that? Sounds to me like the uv9r has a different manual programming method? 👍

@WinnTeam

3 жыл бұрын

lol - just figured this out! in UV9R - hold MENU button down while turning on unit... that will toggle frequency / channel mode :)

@m6stl2010

3 жыл бұрын

Nice one, im glad you got it sorted, have fun with it buddy 👍😁 73 from bristol, uk.

How do I save a custom frequency (i.e., 180.000)?? I go to frequency mode and input "180.00" and every key resets it to the previous freq. Thanks!!!

@m6stl2010

Жыл бұрын

Hi this radio doesn't cover 180.000 mhz, it goes up to between 136 mhz - 174 mhz and 400 - 470 mhz, some baofeng uv82 model covers 130 mhz - 176 mhz and 400 - 520 mhz, but entering 180 mhz will make your radio reset to the previous frequency as it just doesn't cover 180 mhz! Hope this helps 👍

Is that so it works as a little repeater or it can just use a repeater

@m6stl2010

4 жыл бұрын

Mostly activate repeaters on 2m/70cm this radio, 73 👍

Which is the best in your opinion ? Baofeng UV-82, UV-5R, UV-6R. Best regards.

@m6stl2010

4 жыл бұрын

My honest opinion after over 12 years of chinese radio experience, the baofeng uv82! Thanks for the comment buddy, 73 👍

Thank you! Why can't these easy instructions be in the manual? :)

@m6stl2010

6 жыл бұрын

outtahours thanks for the comment, youre quite right! there are a lot of features in these radios that the chinese dont tell u about in there manuals! 73.

@johnbelcher7164

3 жыл бұрын

Thank you Show us ,some more Programming

So how I find the nearest repeater frequencies? I live in Bude, Cornwall, and can't find anyone who has a clue about radio transceivers.

@m6stl2010

5 жыл бұрын

I believe your nearest repeater is in bideford, gb3nd and its operational! rx frequency - 433.350 Tx frequency - 434.950 Shift - 1.6+ Ctcss - 77.0 Hope this helps! 👍

@hugebartlett1884

5 жыл бұрын

@@m6stl2010 Thanks for your reply. I think I may be out of range of Bideford repeater,but tomorrow I'll attach the longer antenna,and try outside.

@m6stl2010

5 жыл бұрын

@@hugebartlett1884 no probs, you might be ok, failing that you could try the liskeard repeater? 👍

@mitchellworrall9105

4 жыл бұрын

What would mind be for Cannock in Staffordshire

Question,do i need to charge the battery for 5 hours before use?

@m6stl2010

2 жыл бұрын

No about 3 will do 👍

this makes it easy to program UV-82 !!!!! to bad the memories dont hold the dual VFO. only the frequency with the carrot gets transfered and like in the video -- dont forget the TX frequency

@m6stl2010

5 жыл бұрын

Thanks for the comment! 👍

@m6stl2010

4 жыл бұрын

@Stevie Blue correct! Just press the star key when the rx frequency and shift is entered and the display will automatically give you the tx frequency to enter straight in 👍

@m6stl2010

4 жыл бұрын

You're right my friend, but still so easy to do! Thanks for the comment 👍

Thank you.

@m6stl2010

3 жыл бұрын

Welcome 👍

Good video

@m6stl2010

5 жыл бұрын

Cheers mate 👍

I have been trying yo figure out how to connect to a repeater for over a year lol. I cant figure it out.

Does it work for all models??

@m6stl2010

3 жыл бұрын

Quite possibly, but i dont know as ive not owned a newer model baofeng for some years now 👍🏼

Do you still need a repeater controller?

@m6stl2010

4 жыл бұрын

Nope not needed, this is all done as shown in the video! 73 👍

@friendlystranger123

4 жыл бұрын

@@m6stl2010 Nice! Thank you for saving me some cash!

@m6stl2010

4 жыл бұрын

@@friendlystranger123 welcome buddy 👍

Soaked with you has the Minneman Dorset dogma

@m6stl2010

5 жыл бұрын

English please

Same radio I can listen but I cannot transmit T-ctcs not holding

@m6stl2010

5 жыл бұрын

You must have a faulty model by the sounds of it! 👍

what function of this?

@m6stl2010

4 жыл бұрын

Explain?

your demo is about cross band repeater? hope you can demo a video using this bf-uv82hp as repeater.

@m6stl2010

4 жыл бұрын

Ill see what i can do my friend, 73 👍

@kuyavenzinfovlog

4 жыл бұрын

@@m6stl2010 hi, i am planning, it is possible to make this bf uv82 a repeater on the mountain?

Eeer....I be luvin' yur accent there mi ol' mucker ;-)

@m6stl2010

4 жыл бұрын

Lol cheers me ole mate 👍

Hi how can I change the voice to English on my pofung uv.6r

@m6stl2010

5 жыл бұрын

Hello, you have to press menu then use the up or down arrow buttons to scroll through all your menu options until you see the option voice, then press menu then up or down arrows until you see english, then press menu to select! Simples. 👍

@djaymigz98

4 жыл бұрын

Go to Menu and type in 14 then select ENG for english then press Menu again

@m6stl2010

4 жыл бұрын

Why are you replying to his question the same reply that I sent him 7 months ago! 😲

How to conect interphone bf 888s to bf 82

@m6stl2010

5 жыл бұрын

Big 10-4!

@m6stl2010

5 жыл бұрын

Roger break!

What is offset?

@m6stl2010

Ай бұрын

Offset is the difference between transmit frequency and receive frequency 👍

Lovelly

@m6stl2010

2 жыл бұрын

Thanks 👍

I needed to program T-ctcs I can't catch up

@m6stl2010

5 жыл бұрын

Ahhh you can do it mate 🤣 just use slower playback speed on the video 👍

why don't you use offset?

@m6stl2010

4 жыл бұрын

I am doing! 👍

How to price indian price

@m6stl2010

2 жыл бұрын

Aliexpress buddy - auto currency 👍

No repeater tone you can hear but your not getting rge tower mate

@m6stl2010

5 жыл бұрын

Yeah mate i think possibly a technical glitch and by! 👍

how to find my repeater? I live in iceland reykjavik

@m6stl2010

4 жыл бұрын

I have no idea buddy sorry 👍

@tommyv4980

3 жыл бұрын

Here you go, this link is specific to reykjavik. I found five repeaters on there for you www.repeaterbook.com/row_repeaters/location_search.php?state_id=IS&type=city&loc=Reykjavik

Nice Spelling

@m6stl2010

4 жыл бұрын

@Michael G he's a dick ain't he! 🤣

This is not the fastest way. All you do is type in the recieve frequency then press menu and type in 25 for frequecy direction then type in 26 for setting the offset. Ounce done press menu then type in 13 for setting the TCTCS and 11 for RCTCS then set the desired code then press menu to confirm. Ouce done press menu 27 to save to memory channel, and done

@m6stl2010

4 жыл бұрын

Don't be so bloody pedantic! 🙄

Italiano neanche a parlarne

@m6stl2010

4 жыл бұрын

Translate to english please?