How to Easily Add a Channel on a BTECH or BaoFeng Handheld Radio (without a PC)
Ғылым және технология
Walk-through steps for manually programming the BTECH and BaoFeng handheld radios. Easily program your HT for Repeater or Simplex Channels along with adding CTCSS or DCS settings.
This video demonstrates the programming on a BaoFeng UV-82HP. The same menu steps work on the MURS-V1, GMRS-V1, UV-5X3, BF-F8HP, UV-82HP, UV-5R, UV-82, along with several other BaoFeng handhelds.
You can compare BaoFeng handhelds at: www.baofengtech.com/compare
Пікірлер: 268
Good thorough explanation. This video helped me a year ago, and I came back and needed it again this year. :-) Something else that might help some people (like me): what the video calls "VFO mode" may be called "frequency mode" by the radio's voice menu system.
Thank you for taking the time to make and post this video. I had no clue how to do this using the useless users manual that came with the radio and while I plan on primarily using the pc software to program the radio, I’m still waiting on my programming cable to arrive. Manually entering a few frequencies on various channels has allowed me to do some immediate testing of the radio while I wait. Thanks again
@iiii5889
2 жыл бұрын
hello, does anyone have this programming in French to install my 4 UV-XR? thank you in advance to all, Christophe sur Fouras, France! also where can I find the PDF instructions for UV-XR? 🤜🤛
I was ready to return my radio until I watched your video. I think there’s hope for this old man yet ! Thank you !
One of the best video's I've seen on programming a radio, clear, understandable and don't need a PhD to follow along. Thank you
Thanks! I have a Baofeng and was unable to find the VFO on the 82. Now I have all the info I need plus I programmed a missing channel: The local repeater. Keep up the good work, 73, PA1EM.
very precise (and rare to find) programming instructions. You made it easy !!! Thanks!
@abuali766
3 жыл бұрын
Thanks a lot, you helped very much
Man this is hands down the best instruction video of this kind ibe seen simple short to the point with accurate information thanks for a great video keep it up
Thank you for the easy to follow directions, this was easily the best teaching video I have seen concerning these radios.
thank you sir thank you so much I've been spending like 2 days looking up how to program it different languages came up thank you for being so kind to take your time to do this much appreciated
Very good instructions - got a new Boafeng radio working today with this video :)
Very good job. Thank you for taking the time to do this video.
excellent. easy as can be. and presented very professionally. only thing i would add is the name of the function when you tell me to push a certain menu number. instead of just menu 23, say menu 23 and the name of the function, which is program a channel or whatever, so the viewer won't get too confused about all the menu numbers. there are a LOT of menu numbers. otherwise, perfect.
This is the best programming video for the Baofeng handheld. First rate!
Jonathan you rule! My fave reference video. Good work mate
Excellent video! Finally one that helps with B-82. Please put out more, simple and to the point 🇺🇸👍
Great video. right to the point and easy to follow. Thanx.
Excellent video young man. You're going skow so anyone who isnt familiar with the setting numbers can folliw along. Thanks again 73s KG5SFT
Great video. Just need a nearby repeater to test the radio on
You done a very good job. I thank you for taking the time to do the video for someone like me to be able to get the things and get it right. you done a great job my friend..
Thanks man you helped me out a lot
Great Vid, Just wanted to convert my Baofeng GT-5TP to Australian Frequency and was able to with this vid, Well done.
All technical questions aside your format is awesome. Most "instructional" videos do way too much talking, are poorly choreographed and badly recorded. Proof that you need more than a recording device to convey a concise, well packaged and informative video lesson. Great job!
Excellent presentation. Clear, concise, and exactly what I needed.
Thanks for the video!
Very Informative helped out alot thanks
Yes you do give a great simple easy way to do it without rubbing and making love to a 30 dollar radio like most other people do fantastic TY
Thanks for the rundown considering purchasing uv2501+220 N9DH Young Hams Rock!!!!!!!
@Baofengtechradio
8 жыл бұрын
+robert houlihan - this video can help for the UV-2501+220 as well: kzread.info/dash/bejne/gpmHtLadnMadg9I.html
great i could not have done this without you well done
THANK YOU!!! I was pulling my hair out with this radio and my computer. easier to manually do it on the radio! thanks again!!!
@jesusmunoz4688
4 жыл бұрын
Uk
@jesusmunoz4688
4 жыл бұрын
7
Very nice tutorial... Thank You
Outstanding instructional video, even an old man could follow it. I've been muddling through attempting to manually reprogram my Baofeng UV-9G since I accidentally wiped out all of the pre-programmed NOAA channels.
Thanks ! that helped me a lot. nice tutorial
Thanks! Exactly what i needed.. Now to write it al down
Thank you man love this video
thanks! good tutorial. now my radio is programmed
@nickolassarakinis7320
3 жыл бұрын
DOES ANY ONE KNOW THE WAY TO MAKE THIS RADIO BF-UV9RXF TRI BAND 1O WATT TO WORK AS CROSS BAND REPETER??? MANUALY??? IS THEIR A BATTARY ELIMINATOR AVAILABLE TO BUY AND AN EXTRA BATTARY 4OOO OE 5OOO MA AND A TRI BAND ANTENNA? THIS IS NOT AVAILABLE Authentic Genuine Nagoya NA-320A Triband HT Antenna 2M-1.25M-70CM (144-220-440Mhz) Antenna SMA-Female for BTECH and BaoFeng Radios ITS OUT OF STOCK IN AMAZON CAN ANY ONE PLEASE HELP PLEASE SEND MESS IN FB THANK YOU
Cheers dude...just got a gt5 as gt3 screen had bust and needed to get the gt5 dialled in for Work on monday💪🏻👍🍺....
Johnathan 73. Thank you for such a step by step explanation. Was very helpful
Very helpful. Thanks.
thank you for sharing..it was a big help for me..
thank you for this
Thanks for this!
Thanks my radio isn’t easy to figure out i hope i got it now thanks to you
Great video
Thank you very much 😊
Great instruction. I have a ptt that only transmits the bottom frequency though. Any way to configure that?
This was an extremely well done video. Thank you for taking the time to make this video. I have a UV-82X (2M/1.25M) Does the radio not have a Tone indicator on the display? Otherwise how do we tell if Tone T(SQL) or DCS is enabled on a specific memory channel?
@Baofengtechradio
8 жыл бұрын
+Eric G if it shows CT on transmit - it is transmitting a CT tone, if it shows CT on receive it is requiring a CT receive tone. (The same thing on DCS) - hopefully that helps
@mehchocolate1257
2 жыл бұрын
@@Baofengtechradio are those radios expensive
The only one I found that gave the whole process. Holding the menu down while turning it on was missing in all the other tutorials I found.
great video
Hey Jonathan thank you for sharing you're the best buddy thank you again 👍👍👍🌞🌞👍🌞
Great job on the video , I have watched several videos tryin to get the hang of my new UV82 , wanting to use it mostly for picking up farm work 2 way radios and transmit , is there a way to program this radio manually ? THANK YOU ...
Very good very good video thank you sir 👍🌞👍
Thank you a lot.
top job mate
Thank you Thank you Excellent instruction video
@iiii5889
2 жыл бұрын
bonjour, est ce quelqu'un aurait cette programmation en Français pour installer mes 4 UV-XR ? merci d'avance à tous et toutes, Christophe sur Fouras, France ! aussi où trouver la notice en PDF pour UV-XR ? 🤜🤛
MOR VIDEOS LIKE THIS !!!!
You state these instructions work with all Baofeng handhelds. I have the Baofend BF-F8HP. Your instructions don't seem to apply. When I attempt to enter the receive frequency, following you on the video, I am not able to enter the complete frequency. Only the numbers of the frequency to left of decimal point change on the display. Any entry attempt for the numbers to the right of the decimal point result with a beep from the handheld indicating this is not permitted. When switching from memory mode to vfo mode is there any indication on the LCD display that lets me know I am in the correct mode for programming? I replayed the video and followed your programming steps but still have the same result. I can't enter the receive frequency for the repeater entry. What am I doing wrong?
Thank You, Young Padawan
Very nice job HOM! I hope that everyone watching this knows that these radios require an Amateur (ham) Radio license. W6FG
Thanks dude
I have the Baofeng UV 9R and I've followed your instructions step by step and I'm not getting the results I was hoping for. Can you please instruct me on how to program my particular Baofeng handheld?
Extremely helpful video. 73
How do you program the 888s and the 888s+. To work with each other
AAAHHH!!! Yes! I figured it out. It won't let you add memory while receiving a transmission. If you want to save a memory channel for something constantly casting (i.e. weather channel), take off the antenna and then program it!
@dgzee66
4 жыл бұрын
Richard Wright i can get mind to save NOAA on channel 1 or at all for that matter
Great video! I'm stuck after setting CTCS. I have VOX on the top of the screen and its not letting me move forward to setting freq.
@wesleybuff2536
4 жыл бұрын
Could you clarify?
Want to change the 500mW/10mW of the faint radio waves, rather than me has UV-5RE, but 5 w/ 1 W is. Please tell me the modification point.
I used this video and it was so simple, reading the manual didn't cut it for me
Thanks alot
This was very useful. Any chance you could do a video on programming uv82 with chirp. It's a bit confusing.
Can you program a Channel Name / Alpha Tag during this process?
I wish you could put out a printed sheet on how to program the unit. I deleted everything then started again with poor results. I think I wrote down all the steps however a print out would be great. Probably not possible on youtube.
Just bought one, however the scan feature doesn't work and the receive is not as good as my UV-B5
can you do this for FM radio frequency?
are you familiar with the baofeng -UV6RA?
I bought a used Baofeng UV9R Plus that had repeater frequencies programed in memory, but no PL tones. Can and how do I just add a PL tone to an already programed repeater frequency or must I delete the frequency and reprogram it back in along with the tone?
How can I get the radio to show the chnl # on top line and frequency on bottom line. I'm using it as a scanner and dont need transmit frequency line.
Hi i have a baofeng BF-A58 and a Baojie BJ-218 i have a bed time to put then working together. I do not hav any other radio to test and see with one is not properly configured
Thanks
Can you please help me to program I do t understand
Good product
do you have any idea on how to preview the transmitting and receiving frequency on a saved channel? TIA
Hi,how can i set my baofeng uv82 point to point?
Hi any idea why I can't go above 440.00 hope someone can help thanks.
Great job. But it seems simpler just to buy a cable.
Thnax Bro!
thank you,
Sweet yidya!
Can a uv 82 be used together with baofeng 888s
So you can program as many channels as you want by doing this?
hey how you doing im a new technician and i im having a problem in programming these bands my problem is if i whant to program the 70 cm band and the chart is showing me 420.0 to 450.0 mhz do i have to program the 420.0 and the 450.0 and do i have to program the 420.0 on the top number line and the 450.0 on the button number line display or do i just program the 420.0 mhz and 450.0 will be program along with the 420.0 programming and the 2 meter band do i program the 144.1 and 148.0 or do i just program 144.1and 148.0 will be programd with the 144.1programming please help i looked everywhere can't help on this?? thanks
I have a baofeng GT3 and it won’t program manually, any ideas
How do I find out what frequencies to use in my area
Question can you program 7 digit frequency it only allows you to program 6 also where do get your frequencies codes at I live in Pittsburgh pa 15221
Can I have a link to buy uv-82 HP.
How do you know when you're in VFO mode? I'm not seeing any difference in the display to indicate otherwise.
@HerbAguayo
7 жыл бұрын
When you are holding the MEM button and turning the radio on, turn the sound up and listen for the voice to say FREQUENCY MODE or CHANNEL MODE. VFO seems to be FREQUENCY MODE and where you will do your programming.
Is Aprs cable is different from aprs k2 ... Whats the K2???
Where we can find the chanel list and frequency?coz I have radio uv5r
Hi Sir, I have a question: I have the same Btech v1 and I would like to know how I can put a free channel with code, for example channel 19 and put code 12 on it to make it functional with another radio that I have, please could you help me with this problem I have? thank you very much and many blessings
Hi. I have Baofeng uv-82 . I need to configure to be able to talk with my friends while we hunting. All of us has different type of radios,Mostly has Motorola walkie-talkie,where you van select channels and select code to specific channels. I need to configure my Baofeng uv-82 to be able to do same ,select channel and attribute specific code.I figured how to add channels with chirp but how to add all codes?I need just to be able to flip between FRS_GMRS channels and codes.
@chrism5086
7 жыл бұрын
Mihai Scutelniciuc I think I know what your getting at. Why not just have your friends turn the ctcss codes off on their radios. Therefore you won't have to deal with it. Just have them set it to 0.
Can some whone make a video on making this ready for vhf maritim channels?
Can you punch in a specific channel vs. scrolling through them one at a time on a Baofeng? I have the UV-82HP. Thanks!
@Baofengtechradio
7 жыл бұрын
Tony Charity - yes you can type in menu numbers direct to skip to them