I like watching you working on the Rc trucks it gives me some mechanical aptitude for my repairs.👍🏻

Dang dude you have put out 31 videos on this truck since it was released. That's a lot of hard run time with very little issues. Can't get over how impressed these new trucks are doing. Thanks for the info and the entertainment.

@rcguygarage

2 жыл бұрын

😂🤣 there's still MORE😜🤪

@rcguygarage

2 жыл бұрын

Do you realize that I didn't even know this🤣😂

Maintenace and repair is a big part of RC. I like seeing this side of the hobby to, and maybe learn something new. At first I did not like it, but the 3/4s rigs are so easy to work on that now I enjoy it on a rainy day to clean and fix them.

@rcguygarage

2 жыл бұрын

Yes great time to make use of for sure

@stormycannon8904

2 жыл бұрын

I totally agree maintenance is important if you want it to last longer.

Nice CRKT Fossil. You are not only an RC nerd, you sir, are also a knife nerd. Also, you must be a serious car enthusiast, the COPO Camaro in previous videos is one of the rarest of the rare and quite possibly the pinnacle of all models. It's one of the most collector sought versions of any Camaro ever produced. It's nice to know that there are other men of "impeccable" taste - value, performance, uniqueness, and with an unpretentious blue collar attitude. I like your style

Beach wrenching comes with a great view. You even sound more calm and relaxed today Guy. 👍💪

Got to luv just chilling by the beach, beach wrenching 😎 👌 👍👍👍

I have a cleaning routine after burning 🔥 .A quick rinse on the wheels and spray with wd40 then a complete wipe down,and inspect all parts.

Asked you about the sand in your earlier video and weather it was OK to do so. Here you are wrenching and showing us what happens. That's awesome, really appreciate it. Now I know and knowing is half the battle. Dude, you rock 👊

@paulclancy2404

2 жыл бұрын

Just quadruple wear am tear but it's ok spray oilisuour freond

Wrenching with Guy. Today's episode: Salt maintenance on the beach bench. Lol🛠🛠🛠 Sorry that the wifey is not feeling well. Getting sick on vacation sucks. I hope she feels better soon🤢😷🤢😷 Bash on, Guy.🤪💯🏎💥🤜

@rcguygarage

2 жыл бұрын

Yeah she was going to run this truck while I drove the Kaiju to compare but she wasn't up to it

Last week bashing the sand of Vasquez Rocks, my drive shaft ruptured at the same place yours is wearing down. The shaft is very close to the upgraded 2050kv motor's heat sink and must have gotten sand trapped between it and the sink, along with heat, that ripped it apart. Amazing damage. Aluminum drive shaft is on order with a different heat sink that slips on instead of the current screw-clamp style to help reduce the profile intruding into the drive shaft's comfort zone.

The body panel clips for roof slides is a great idea!! I’m going to do the same.

@rcguygarage

2 жыл бұрын

👍💯

Thanks for the video Guy. It’s nice to see people work on things at a comfortable pace. You are extremely informative and honest with all your videos. That’s says a lot. Great camera footage. Very easy to see everything. Great stuff my friend. 👍👍👍👊

Great video I see it use’s a lot of the Arrma 3s Blx line. Interesting it’s probably a 1/8 Arrma infraction chassis. ?!? Thanks for the great job

@rcguygarage

2 жыл бұрын

It's a new chassis for sure

I think the Outcast has it over the Maxx when it comes to sand and those rear bearings! I sure hope that the Mrs. is feeling better Guy! Let her know that we wish her well. Had to send a controller back to Traxxas this morning... spring on the steering wheel came off inside and it wouldn't return to neutral. Traxxas is sending a new controller under warranty, but it cost me $13.68 to ship it! See? Earl DOES watch your videos! :)

@rcguygarage

2 жыл бұрын

EARL who🤪😜

@rt66rc86

2 жыл бұрын

@@rcguygarage :) You know!?, The "Duke of RC" Earl.... :) That one! The one that owns every RC that was ever made, ever will be made and ever ... might be made!? :)

@rcguygarage

2 жыл бұрын

@@rt66rc86 you're forgetting every color

@rt66rc86

2 жыл бұрын

@@rcguygarage I sure did... It's so hard to keep track!!! :)

How are the diff internals holding up so far? With the bigger tires and all metal gears, what fluid weight is working in the diffs. Just upgraded my vortex’s to gpm drive axles and now I’m destroying rear diff internal outputs!?! Frustrating! Working on a big rock 4s build to run the back flip lp’s and stressing the diff internals?

@rcguygarage

2 жыл бұрын

This thing is bone stock other than the pinion side motor bearing that I replaced and a 15 tooth pinion because I shattered the 13 at the skatepark due to my not tightening the motor mount enough

You have gas in the cars and generator to clean them out 🤔

@rcguygarage

2 жыл бұрын

No generator here and I don't think my wife would appreciate us using our drinking water hose to siphon gas out of her tank 😂🤣😂🤣😂🤣

@earlmoorhead5555

2 жыл бұрын

@@rcguygarage just cleaning out the hose honey nothing to see here lmao 😂

@rcguygarage

2 жыл бұрын

@@earlmoorhead5555 👀☠️👀

Hey man. How would you rate the losi lasernut U4 on a scale of 1to10 for bashing?

@rcguygarage

2 жыл бұрын

That is a very tough one because each person considers bashing a different way if you've watched any of my videos what I do with my vehicles is what I consider bashing. When I had converted it to Monster Nut I was able to achieve a much higher level than the truck is intended for however it does have its weaknesses because it's not really a basher in my opinion hopefully that helps

@Maine-iacsRC

2 жыл бұрын

@@rcguygarage Well on that note what do you think should be my next purchase in your opinion The new 4s outcast or Kraton or one of the 6s versions?

@rcguygarage

2 жыл бұрын

@@Maine-iacsRC guy I don't even know you so how can I give you an opinion on something like that it is your money in your pocket and your driving style that needs to make that decision I don't tell anybody what to get sorry

@Maine-iacsRC

2 жыл бұрын

@@rcguygarage No problem. Just thought you may of had a good opinion on that where I'm fairly new to it and I just love to bash and go fast. But no problem man.

@rcguygarage

2 жыл бұрын

I'm sure you understand😂🤣 if I was to tell you to buy something then it's junk and not how you drive it's then my fault😂🤣

Salty...just like the KZread comments section every time your opinion differs from theirs 😮😂

Use a razor blade or hobby knife to get those pesky baring seals off. A pocket knife is too thick.

@rcguygarage

2 жыл бұрын

Come on guy this ain't my first rodeo here I just didn't have one otherwise I would have used it I cut out the half an hour looking for a razor blade 😂🤣😂🤣

I live on the water. Just the salt on the air would seize bearings if I left rcs outside In shed ect , just being at beach you should spray rc silicone oil

@paulclancy2404

2 жыл бұрын

Just put drops on rubber shield it works way inside inside axle set screw also

Rule #1 when in need of a hammer, everything is a hammer. I hope you're wife feels better.

@rcguygarage

2 жыл бұрын

👍💯🙏

Hi mate on the universal drive joint I spray a dry lubricant there's plenty of different brands out there. No sand or dirt will stick to a dry lubricat. Prevention always works better. 👍🦘🤔🤣🤪🤣

@rcguygarage

2 жыл бұрын

Yes I used to use a spray chain dry lube similar reason👍💯