I got the kit last week. Comes with the 1.3 fitted. No numbers on the air cap. On the nossle it says 1.3 or 1.0 just HSP. Nothing on the needle but it's pretty obvious, which is which. Used the 1.0 yesterday to repaint two wheels, very pleased with the results. My old gun is now in the bin.

@peteshobbies5383

Ай бұрын

It's interesting that there is no numbering on the cap. What sort of pressure did you use it at with the 1.0, I've found the smaller tips you can get away with a lower pressure than the bigger tips, obviously depends on what materials you're spraying as well, cheers Stephen 👍

@stephenhalsall6580

Ай бұрын

@@peteshobbies5383 Hi, I was spray a gloss black HS 2k, on a 4:1 ratio with a small dash of thinners. Just what felt right . The pressure was 2.5 bar May be a little higher. I know I should be more precise, but it first first time use and on wheels so expected a few issues. However I was majorly impressed and more than happy with the results. May be a while before I use the 1.3 to do a bumper job. Really I like your videos because you are real world and not the fancy “look at my Booth Guys” from whom you learn very little.

@peteshobbies5383

Ай бұрын

It's the results that matter, and it sounds like you achieved what you wanted. Yeah, I know what you mean about being able to relate to me and what I'm doing , it real life for most of us, we don't have great facilities but as long as we get the results it really doesn't matter. I have a mechanical engineering background, so I'm just as interested in how a gun is made and the physical differences as to the performance differences there may be, manufacturers often try and sell us the same thing twice, just badge it differently 😂, cheers mate, let me know how you get on with the 1.3 when you use it 👍

Hi Pete, enjoying your in-depth tech videos, as always. Can I request a video for a full gun strip down for the Ani r150 using the service pack? I currently have a small internal leak, but have no idea where it's coming from. I'd like to fully strip down the gun & replace all parts, hopefully fixing the issue. I'm finding it quite difficult to find any info on how to do this and the service pack doesn't come with any instructions! 😕 Would be good to see a demo 👍

@peteshobbies5383

Ай бұрын

Hi Edward, Yes, I think I mentioned in the video that we need to do that as the service kits are relatively cheap and should cover all the parts you need, it's on my list to do but don't hold your breath as it's a long list, but we will get there, cheers mate, good to hear you're enjoying the videos 😀 👍

Amazing that hat fits with all the knowledge in your head. Thanks for another great video. I have the Ani 150 but I’m liking the mini from your testing.

@peteshobbies5383

Ай бұрын

Hi Scott, I still have a few R150 guns. What I would say is if your R150 is the earlier model, so only has one hole in each air horn you will notice quite a difference between the R150 and R160, if, your R150 has two holes in each air horn, so four in total, you probably won't notice any difference between yours and the R160, although obviously you will if you go with a 1.3 or 1.4 setup as they flow more material. The cap is doing OK thanks mate, it still has room to expand, so the knowledge collecting still goes on 😁, cheers Scott ✌️

Thanks Pete!! I’ve been patiently waiting on this one and you didn’t disappoint.

@peteshobbies5383

Ай бұрын

Hi Jordan, good to hear you enjoyed it, I'll get a proper review out soon and an air consumption back to back with loads of minis, cheers, mate 👍

I have the 160 and it’s an awesome gun for the money . I recently purchased a lph80 , what a gun with that low air consumption, absolutely love the minimal overspray at home, gonna get another one so I have one for clear and base .

@peteshobbies5383

Ай бұрын

Hi Mate, The LPH80 is quite a contrast to the ANI R160/Compact. It's excellent for smaller areas and , as you say, has minimal overspray. The ANI has a much larger fan, needs more air, and runs at a higher pressure. It's more of an arounder, especially with the new bigger tips sizes, which speed it up and make it more usable for bigger projects.

great video pete i run a couple of these great little guns i await the comparison videos on the 1.3-1.4 to see whats best

@peteshobbies5383

Ай бұрын

Hi Grant, when I enquired about the compact, I was advised that 1.3 was the best for most things, SGD only had 1.4 in stock at the time, so I went for that with the 1.3 on backorder. That gave me a while with the 1.4, which I was thinking would be a bit ott for the smaller stuff. However, it's been really good. I'm a little surprised that the 1.3 and 1.4 pattern is different, that video was literally the first time I had put anything through the 1.3 and looking at the 1.4 pattern it looks wetter and smaller, in use I hadn't noticed that at all. The 1.3 and 1.4 definitely flow more material, so speed the guns up with no deterioration in finish, not as far as I could see anyway. So 1.2 v 1.3 testing needs to be done as well as 1.3 v 1.4, lots to play with, so it should keep me busy. Cheers mate 👍

Early one. Thanks! 😁😎

@peteshobbies5383

Ай бұрын

Hi buddy, you're most welcome 😀

CRACKING VIDEO THAT PETE VERY WELL EXPLAINED THANKS FOR SHARING THAT INFORMATION I HAVE THE ANI 160Q ITS ONLY A 1.2 MATE BUT THE FINSH IS OUT STANDING 😊

@peteshobbies5383

Ай бұрын

Hi Andrew, They are good little guns, and the bigger tip sizes do add to their appeal, especially for bigger areas, a good edition for sure, cheers mate 👍

Cool gun. Keen to see the 1.3mm in action

@peteshobbies5383

Ай бұрын

Hi mate, Yes, I've always been a fan (excuse the pun 😁) of the little ANI, and having the 1.3 & 1.4 has given it a wider range of uses wile keeping the air consumption the same as before, I've been using the 1.4 and getting on really well with it so I'm sure the 1.3 will be as good 👍

In the kit ,you don’t get two caps, just the needle and tip.

@peteshobbies5383

Ай бұрын

Hi Stephen, I have just had a look, and you're right. As far as I can see, the caps are the same apart from the markings anyway, so it should work fine, The new caps I have are shaped differently, and I still haven't found out if the newer version of the 1.2, 1.1, etc, are shaped the same. I have been using the 1.2 and 1.3 today. They are good guns, although they do like a bit of pressure, cheers mate, thanks for pointing that out ✌️

Do you think 45 to 50 psi makes a finer flatter finish with clearcoat

@peteshobbies5383

Ай бұрын

Hi Mate, most definitely, I've had many people contact me over the last few years who have been disappointed with the finish they are getting from there R160s, when I ask them about pressure they are normally around 29psi, when I've recommended more pressure they have said the finish is much better, it depends on the clear, thin MS clears around 44psi is ok, for HS clears I recommend 49 to 50psi. It does use more air, but it's worth it. You can get some great finishes with it. Cheers, buddy 👍

I find new spray gun for small area ..For you is better ANI Compact 1,3 or AIR GUNSA AZ4 junior 1,3 ? Thanks

@peteshobbies5383

Ай бұрын

Hi buddy, They are both very good, I've been using the Compact in 1.3 today, and it's definitely a better gun for larger areas than the smaller 1.2. The AZ4 in 1.3 with the AZ4 2 cap is also very good, I will have to put them against each other one day, but, given the choice, I think I would go with the ANI considering it actually cheaper as well 👍

Here in skandinavien they stopped selling satajet rps cup last year. Pps cups still no problem.

@peteshobbies5383

Ай бұрын

Hi Mate, PPS is still OK in the UK, but there is talk of stopping them next year

Hi Pete, great video mate and a very interesting watch👌I know you've always liked your R160 so you are the ideal person to compare it to the new Compact, TBH I was expecting the Compact setups to use more air than the R160 setups seeing as the Compact is a faster gun or is it all down to the tip sizes🤔what I'm asking here is, are these guns both the same apart from the tip sizes or is there a difference in the air caps apart from the more pointy shape of the airhorns🤔 I'm wondering if the Compact is an upgrade to the R160 or is it just an alternative🤷‍♂I guess we will have to wait for the actual painting comparison😁 Do you know if the Compact will come with the digital gauge from the Skull Pete, I've been thinking about getting another gun and have the Compact, the new Sagola 4600 or one of the Porphis split tip guns in mind the price isn't a factor but a ANI Compact with the digital gauge would be nearer the top of my list🤔cheers Pete👍

@peteshobbies5383

Ай бұрын

Hi John, From what I can find, the 4 setups here use the same amount of air, more or less. The Compact isn't an upgrade to the R160. It simply complements the R160 by making it more usable, particularly if people have larger areas to cover or thicker materials to spray. I was skeptical as to whether or not I needed one, but having used the 1.4 I totally get the point of having the bigger sizes, hopefully ANI will come out with a 1.8 version one day, the amount of people that ask about a smaller primer gun is unbelievable. ANI do make the R160 with reception for their digital gauge, so I'm sure in time with enough enquiries SpraygunsDirect will start to stock them, it's really handy to be able to just twist and swap the gauge over. One thing that came out of my conversations with SGD was that the polished silver ANI guns are made exclusively for SGD. You can get a black finish or a matte silver finish from other suppliers but not polished, cheers mate 👍

@JohnWD40TC02

Ай бұрын

Thanks for all the info Pete, it seems that if you have the R160 then getting the Compact would make a great addition and make for a versatile setup or you could just get the Compact tip sets for the R160 making that gun do both jobs🤔 Sorry mate but I have yet another question for you😁would you say that the Skull is a better made gun compared to the Compact and the R160 and does it spray better🤔I will soon be looking for another gun but want something a bit different🤷‍♂thanks Pete👍

@peteshobbies5383

Ай бұрын

@JohnWD40TC02 Hi John, Yes, if you have an R160 and want to speed it up or cover larger areas then just buying a tip set would do the trick, the Compact comes with a bigger cup as well so it you wanted that it may be better to get the complete Compact, although the cups are only around 12.GBP so it's still cheaper to buy the parts separately. The Skull is the ANI 200 Series, also known as the black, I think they are excellent spray guns, I only have one in 1.3 but for what you get with it as a kit, so cup, detachable digital gauge, 3 caps and obviously the gun it really is excellent value, I don't you'll be disappointed , cheers John 👍

@JohnWD40TC02

Ай бұрын

Ok thanks for the advice mate, food for thought🤔I can't decide which gun to get😂👍

Hi Pete. Great video again. Just wanted to share with you that I recently bought a gun which is Ben Bow pk80 . Its amazing for me as a hobby usage in a garage. It's not very expensive. Would appreciate it if you happen to check it in the future. I would like to know your opinion. I think its much better than Ani and all cheap guns from far east😊. Best wishes😉🙂

@peteshobbies5383

Ай бұрын

Hi Mate, I just looked that up. It's a full-size gun , looking at the price. It's over over £200 GBP, so it's not particularly cheap. Maybe it's just expensive in the UK ?

@ukaszmietus7453

Ай бұрын

Well I know it's full size. Just didnt have the opportunity to mention that before. It's actually cheaper here in Poland 😊. Much cheaper. Anyway, please check it if you have some free time in the future. I ordered porphis 717 and cant wait to try to use it. Thanks A lot for your advice... cheers 😊

I've got the r160q with 1.0 & 1.2 set up

@peteshobbies5383

Ай бұрын

Hi Mate, Yes, that's the same as what I had, I wasn't convinced I needed a 1.3 or 1.4 but after getting them I can see why they have a place, particularly for bigger areas.

@kingvtec100

Ай бұрын

@peteshobbies5383 there such good guns & very friendly price only negative id say is the pot lid arnt very good, but I use the pps adapters on mine, also good to know u can use the compact set on the standard R160q body

@peteshobbies5383

Ай бұрын

@kingvtec100 That was the main reason for doing the video, so people know they can swap and change the tip sets over, cheers mate 👍

The whole term 'compact' means nothing. It is not smaller and does not sprayer smaller fan. lol I have the R160 and happy with it. Can't beat the price for the gun or tips

@peteshobbies5383

Ай бұрын

Hi buddy, I think the idea is to market it a little differently, so it comes with a larger cup and bigger tips than is available with the R160. When I first spoke to SpraygunsDirect they were completely open about the fact it's the same gun as the R160, but comes with a choice of bigger tips, and, as I say, the larger cup as standard. I guess you have to call it something so Compact seems as good a name as anything. What I like, as in your case, you already have an R160, so now there are more setups available to speed the gun up or for thicker materials, so it's giving more choices to the people that already have the R160, which can only be good. Cheers mate, appreciate the comments 👍

Senjata yang tidak beredar di Indonesia.

@peteshobbies5383

Ай бұрын

Hi buddy, as far as I know, Sprayguns Direct ship worldwide so you can get them from them 👍