Continue to ramble on Pete you’re fine a lot of us seem to hang on every word you say anyway . We’re listening.

@peteshobbies5383

Жыл бұрын

Hi Don, thanks mate, I'll continue to do just that, much appreciated 👍 😀

Nice video there Pete very well explained thanks for sharing that information great finish

@peteshobbies5383

Жыл бұрын

Thank you Andrew, much appreciated 👍

Brilliant. TYVM Gov'👍💯

@peteshobbies5383

Жыл бұрын

Thanks as always mate, much appreciated 👍

Beautiful work! ❤

@peteshobbies5383

Жыл бұрын

Thanks John 👍

Nice job, im used ANI R150 3 year, good works

@peteshobbies5383

Жыл бұрын

Hi Ivan, yes, they are good, and great value for money 👍

I’m still in love with my r160, I do have the Skull edition and the F160 but still be r160 does a fantastic job with the 1.2 tip on everything, the lacquer at 2.5 bar lays perfectly flat, it’s fantastic!

@peteshobbies5383

Жыл бұрын

Hi buddy, yeah, they are great little guns, what cap have you got in your F160? , they also fit the Skull as far as I can tell, haven't used it yet but should be fine 👍

@cartradediary6131

Жыл бұрын

@@peteshobbies5383 I have it with the 1.3 setup, also very happy with it overall, still can’t get along with the skull yet lol

@peteshobbies5383

Жыл бұрын

Hi mate, I've found the Skull very good, what caps are you using and what sort of pressure? , seems to be a very wide range of pressures it can be used at

Love my R160.

@peteshobbies5383

Жыл бұрын

Hi Timmy, they are great little guns aren't they 👍

Hi Pete hope you are keeping well mate. Another superb finish from our friendly gun collector😁love that colour Pete there is just enough candy on there to give it a nice purple colour and what you have done is pretty close to the finish you get on the TVR's they have some really nice colours on them. It's been a while since I've used my ANI R150 you may remember that I couldn't get on with it that well but after you told me about the pressure needed to get a good finish the gun is totally transformed, your R160 laid the base and candy really nice especially the candy as it put a nice even but thin coat down. I still haven't got the F160 which going by what you have done with it is a great gun to have for just about anything you want to paint, maybe I should stop buying these expensive guns then get a few cheaper ones to play around with🤔 thanks Pete👍 Oh and as others have said don't worry about the rambling mate as everything you say contains really good info, could be worse mate you could have people like me making long rambling comments🙄🤦‍♂🤪🤣

@peteshobbies5383

Жыл бұрын

Hi John, yes, it was a lovely finish, a small one and a little one for £220, can't be bad. I'm thinking a similar thing, I've got plenty of quality guns and have just ordered a few cheap guns to see how they go, after all, if we can get the same results with a cheap gun then it really does make you wonder why we pay all that money for the better ones. I realise it's not all just about the finish but to a lot of people watching our stuff they won't be painting that often so can't justify the heavy price tag, cheers mate 👍

@JohnWD40TC02

Жыл бұрын

Maybe we should start a "Cheap and Cheerful" section for those that don't want to spend a lot on a gun but still want a gun they know can deliver a decent finish, that was my problem when I first started I bought a cheap gun and got terrible results but I didn't know if it was me or the gun that was the cause so I bought another gun which was a bit more money and again had terrible results.... rinse and repeat.... it wasn't until I got my first SRI ProLite that I realised I'm a crap painter🙄😭😂 Maybe have a limit of up to £40 to £50, don't know what's available within that price cap though🤔🤷‍♂

Hi Pete good to see you are hard at it....Kiwi

@peteshobbies5383

Жыл бұрын

Hi Mate, hope all is well with you and you're keeping busy, is the turbine still your main weapon these days? , cheers 👍

@mreightytwenty8709

Жыл бұрын

@@peteshobbies5383 Yes all good here been very busy. Yes my turbine is the one....love it.....would never go back.....

Hi Pete, thanks as always for the great advice. I have noted the pressures you recommend but was Just wondering what you recommend the fluid volume to be at for the best results when using base and clear? Bought an r160 after watching this and planning on spraying for the first time with it tomorrow on a pair of side skirts.

@peteshobbies5383

20 күн бұрын

Hi Mate, The R160 is a great little tool . For clear, I use 3.5 bar with the fluid wide open , for base around 2.5 to 2.6 bar , as far as material output it really does depend on what you are doing, what paint and color you are using and the substrate you have. As a guide, start at 2 out form fully closed . You will probably end up around 2 1/2 to 3 out, but see how it goes and what results you are getting. I hope that helps 👍

Not a big fan of a fan adjuster on the side but the end results speak for itself... simply wonderful!

@biggysground

7 ай бұрын

Looks like a Meiji mated with Sata and had a baby.

@peteshobbies5383

7 ай бұрын

Certainly, if I was designing a gun, I wouldn't put the fan control on the side, but having said that, if it's not in the way of the painters thumb, as some are, it's not a problem normally. I rather like your Meiji/Sata child analogie, which certainly made me smile 😃 Cheers mate 👍

Hi Pete, I tried my r160 at 3.5 bar (after your recommendation) with clear the other week and found it much better than the suggested 2.2 bar 👍

@peteshobbies5383

Жыл бұрын

Hi Karl, The R160 does need a bit of pressure, I know some run them at 4 bar for clear, but as you know, I suggest 3.5 and, as you say. It performs quite well at that pressure, glad you got better results 👍

Princess Auto in Canada sells a small selection of Ani products. It's $240 Canadian for a F160 HPS before tax

@peteshobbies5383

18 күн бұрын

Hi Mate, Have you tried Sprayguns Direct? , they export outside the UK , and they are equivalent to $170 CAD. You would need to put your tax and shipping on top, but it may be cheaper than from within Canada. www.spraygunsdirect.co.uk/product/ani-f160-silver-hps-gravity-spray-gun/

One of these days, could you PLEASE add some racing stripes to the tank or fender? Toodle-pip👍

@peteshobbies5383

Жыл бұрын

Hi buddy, yes, plenty planned, I have a few older videos of multiple colour pinstripe candys, just a matter of getting them edited etc. Don't know if your seen these, they this was a Yamaha tank I did a while ago in 3 colours for someone, cheers 👍 kzread.info/dash/bejne/qIhkltGkds-Tnpc.html kzread.info/dash/bejne/k5aF1aiedtXRis4.html

Pete I need your opinion. If money was no object what kind of base gun would you buy? Myself I'm torn between the Walcom hte and the dv1. I do a lot of blending and need all the help I can get

@peteshobbies5383

Жыл бұрын

Hi mate, I would go with the DV1 base gun, it's one of the best base guns out there, I love the Walcom clear gun, not so blown away by their base gun, people say they are the same apart from marking but they are not, there are slight differences.

Have you ever used the H2 heating attachment Pete?? It could be useful if it works as advertised.

@peteshobbies5383

7 ай бұрын

Hi mate, No, I haven't, I was going to get one but a fair few people contacted me to say don't waste your money as they don't really work and are frawrt with problems so I decided not too as they're not cheap

@innerarmour8347

7 ай бұрын

@@peteshobbies5383 I was actually just about to buy one with a new gun but you got me thinking now Pete 🤷 I was wondering why I can't find any videos of it on here.

@peteshobbies5383

7 ай бұрын

@innerarmour8347 I can't say if they are any good or not, but, as I say, a fair few who have used them have said don't waste your money so I haven't 😬

Good afternoon. I want to ask, what is the difference between the iwata w400 wbx and w400 wb2 spray guns? Thank you

@peteshobbies5383

Жыл бұрын

Hi Stepan, it's purely the cap, and colour of the controls, the WBX cap runs at a slightly higher pressure, this video at the start explains it better kzread.info/dash/bejne/f6yppLiJfJSWZMo.html

Hi Pete hope u are doing well. What are you looking for when you up the pressure or lower the pressure from what the gun manufacture says if you know what i mean?

@peteshobbies5383

Жыл бұрын

Hi Scott, good question, I'm trying to sort a video out which will explain it, it's just difficult thinking what form that will take. Normally, the higher the pressure the finer the atomisation will be, but, you will find the fan can separate top and bottom so you can overdo it. You can also get a dry application with too much pressure so you need to watch out for that as well, a lower pressure will give you more peel generally which can be needed to try and match existing paint, of course, materials, temperature, speed and distance from the work also play a part as do fan size on the gun

@scottyoung2995

Жыл бұрын

@@peteshobbies5383 Thanks Pete very well put i'm always trying to learn as people say things assuming you know what to look for but generally people who watch these videos on youtube (not just yours) don't necessarily know what people mean. and the people that do know probably don't watch them. 🤪

@peteshobbies5383

Жыл бұрын

Yeah, It is always difficult as to what depth you go into things, I often think I go into detail too much but often people say they want more. As I say, I am planning on do a few more basic that may help people, the hardest part is thinking how to get what you are trying to convey over in a video, but I'll get there cheers mate 👍

🥰🥰sending Love🥰🥰

@peteshobbies5383

Жыл бұрын

Thank you, hope alls well with you 👍

hi pete tell me which gun should I buy sagola mini extrim,welcome carbonio,Sri pro. with cap 1.2 for clear coats. price is not important

@peteshobbies5383

Жыл бұрын

If price isn't important I would buy a Devilbiss DV1S, they are a great gun

@user-qr3ff7uj7f

Жыл бұрын

Unfortunately, I can only buy one of these

@peteshobbies5383

Жыл бұрын

I would go with the Sagola if you don't mind the air consumption, if the air is a consideration I would go with the Sri Pro Lite

@user-qr3ff7uj7f

Жыл бұрын

@@peteshobbies5383 👍👍 Thanks for the help. Thank you for your hard work in helping us choose the right tool. Good health and long life to you!!!

@peteshobbies5383

Жыл бұрын

Thank you, much appreciated 👍

i have f160 hps 1.3mm and use 22 psi. Should it be higher? Finish is good but slightly textured.

@peteshobbies5383

Жыл бұрын

Hi buddy, depends on the cap, this one is the HPS cap and I run it at 29psi which is 2 bar in this video which works well, ANI actually recommend higher with that cap but never found it necessary

@zZZSPARKZZz

Жыл бұрын

@Pete's Hobbies cheers, thank you very much! Great job, as always. I don't know if anyone has suggested this, but I would like better video quality as sometimes it is harder to see your beautiful finishes.

@peteshobbies5383

Жыл бұрын

Hi buddy, the video on my head is 1k 60 frames, and the final shots, inside and out are 4k 60 frames so I imagine it's KZread keeping the size down for easier storage? , I'm not sure but the original shots are very high quality, it's a Samsung S22 on full resolution. I think I need a better head camera, trouble is they get covered in muck so easy I'm a bit loathed to get a new one, was waiting for the old Gopro to die first 😅, cheers buddy 👍

@zZZSPARKZZz

Жыл бұрын

@Pete's Hobbies can't wait mate keep it going love your videos!!

i have f160 and the black 1.3 and i dont see a paint or clear difference between them,

@peteshobbies5383

Жыл бұрын

Hi mate, the caps are the same on the black and F160 apart from the material they are made from so there is little difference between them, the build quality on the black is definitely better. I've found the black can give a flatter finish if it's needed but that's with the clear cap, have only tried the HPS cap on the F160, the F160 is a cracking gun for the money

what tip is best for clear on the r160?...is the 1.0 a good choice?

@peteshobbies5383

Жыл бұрын

Hi Tony, it depends on the area you need to cover and the clear you use, generally I would recommend the 1.2 for clear coat as it flows more material which is normally required with a clear

@tonyb4350

Жыл бұрын

@@peteshobbies5383 small parts, harley tanks, fenders, etc...looking for best atomization in tight spots,swingarms etc....1.0 too small?.. using fc720 clear

@tonyb4350

Жыл бұрын

@@peteshobbies5383 already ordered the 1.0...hope it works

@peteshobbies5383

Жыл бұрын

It will work fine, just take a little longer on the bigger parts, let me know what you think when you've used it

@tonyb4350

Жыл бұрын

@@peteshobbies5383 ok... thank you brother and GOD bless

Hello I have a question

@peteshobbies5383

Жыл бұрын

Hi Bryan , what's the question?

Hi Pete, very nice video. One of these days, could you please make Pattern Review video for A.N.I. F160 with 1.0 1.2 1.3 1.4 nozzle size? Thank you and GOD bless.

@peteshobbies5383

Жыл бұрын

Hi Nikola, I will try one day. Yes, I only have 1.3, 1.4, 1.9 at the moment, but if I can get the others at a reasonable cost, I certainly will do that. Thanks, mate 👍