Joel, it is you who have grace and beauty! :D

@3DPrintingNerd

2 жыл бұрын

Awwww. heh. THANK YOU for such a fun and wonderful model!

@MrFerrariF360

2 жыл бұрын

Nice, just bought the model. Will try with really thick layer

@joeboxter3635

Жыл бұрын

@@3DPrintingNerd Wow! Not only are you talented 3d printer guy and KZreadr, you are amazing at Photoshop. Love the fake family - no way she married you. Lol. Joking aside. Another nice video.

Print in place objects not only showcase a 3d printer's capability, but also the sheer skill and talent of the designer. This is awesome!

@armandoa2484

2 жыл бұрын

I agree with you one hundred percent. I admire their creativity, the designs are awesome!

@3DPrintingNerd

2 жыл бұрын

I fully agree.

@olafb.2929

2 жыл бұрын

Perfectly said. I am still astonished about how talented Sven is!

@shaggyrumplenutz1610

2 жыл бұрын

I look at some designs and am blown away by the detail and thought that goes into them. I'm like "Yay, I made a cube!".

@waynefilkins8394

Жыл бұрын

I have been working with stuff like this in cad, mostly hinges, and it's really addicting. I was creating stuff where I would put a thin aluminum bar thing through and use that as a hinge. I always thought print-in-place would be really weak but I redesigned one of my products to just print the whole hinge and it actually holds a lot of weight, far more than needed. I really like where 3d printing is going.

Clockspring3D has had soo many great designs! Always exciting to see what’s next from his creative engineering mind.

@3DPrintingNerd

2 жыл бұрын

LOVE his models so much!

My absolute favorite totally over-engineered, but immensely satisfying and super amazing print-in-place phone stand. Gotta love the @Clockspring genius in this design.

@3DPrintingNerd

2 жыл бұрын

I love how over engineered and awesome it is

Thank you for the shout out Joel! Tomorrow i'll print a picture of you out on my printer at work and pop it in my wallet :) Keep up the good work ;)

Now I know how I look as a God! I’ll stick with human. No dresses required ;)

@3DPrintingNerd

2 жыл бұрын

TOGA! TOGA!

@TheLastChapter2023

2 жыл бұрын

He prints at the atomic level . Perfect E-steps , zero calibration .

Great video, thank you and Sean for all the fun and knowledge learned in watching you guys!

@3DPrintingNerd

2 жыл бұрын

Glad you enjoyed it

Fantastic as always. Love seeing clockspring3D designs shown so wonderfully!

@3DPrintingNerd

2 жыл бұрын

Thank you! Cheers!

I made it this far because your videos keep me interested. Good things in front of and behind the camera, skillfully blended together makes watching easy. 😉

Dammit, THAT's what's wrong with my Vyper! Also, send me those printing profiles, and also how to set the e-steps in the Vyper. Might be easier to just send me your entire printer.

@3DPrintingNerd

2 жыл бұрын

Dude! I’ll send you things!

@marty1765

2 жыл бұрын

I just got my vyper today! I remember seeing this video earlier and came back hoping to see info on how to fix this but ... I dont see any 😱 Im having the same issue but not sure how to adjust the esteps

@3DPrintingNerd

2 жыл бұрын

Oh shoot. Have a look at this: m.all3dp.com/2/extruder-calibration-6-easy-steps-2/

@marty1765

2 жыл бұрын

@@3DPrintingNerd Thank you! Such a savior!! 😍💯💯💯

"It's a phone." Cracked me up harder than it should've.

congrats on 500k! 😁

That filament one glint is really nice. Another great model Clockspring. I’m so gonna make that after work tonight.

Nice, I got this printer this week! Can't wait to see more videos of this printer from you! Gonna do the e-step calibration ASAP.

B-roll and FX game on point 😂

We had our Vyper for a week now, absolutely love it! ❤

Editing gets an A+ on this video

@3DPrintingNerd

2 жыл бұрын

FULLY AGREED

It is an amazing print. As soon as I watched your video I had to buy the stl and print it out. It came out wonderful, in blue of course. Keep inspiring others as you have inspired me.

@3DPrintingNerd

2 жыл бұрын

Oh that’s great to hear, and in blue! :)

Keep up the great work Joel! 👍🏻

@3DPrintingNerd

2 жыл бұрын

Thank you!

That is one very awesome phone stand and a very beautiful printer! great video Joel!

I will be printing this amazing design tonight! On the Vyper - I received Vyper this last Friday, printing all weekend, no problems, just had to tighten extruder a bit and its doing great!

Sweet design

Sean, Great editing and add ins on this one. Way to rock it. Joel nice work too :P

@Aidenn23

2 жыл бұрын

Haha thank you!

I printed the same phone stand in the same filament, FilamentOne Midnight Glint is amazing color. And the phone stand is simply mind blowing.

@3DPrintingNerd

2 жыл бұрын

It truly is. Plus, you're right - that color is AMAZING

I'm going to have to print that stand, it looks fantastic!

Awesome part Joel! Love the story to this all, it is something I am working on! We have made so many of those phone holders after family members saw our timelapse ha ha! Keep up the great work! -Grant

you could mod the phone holder place, to have a spot for headphones as well. maybe make the stand just a little wider.

great design! 😌

Loved the Discworld reference!

Just downloaded Mr. Clockspring's design, thanks. Projected time on Ender 3 V2 with raft and 40% infill is 17 hours.

This channel is so unique i just cant stop watching the videos, god i enjoy these too much.

@3DPrintingNerd

2 жыл бұрын

YOU ARE AMAZING

@haayzac3231

2 жыл бұрын

@@3DPrintingNerd no no it’s honestly true, I have been watching this channel for a year and love it

@haayzac3231

2 жыл бұрын

@@3DPrintingNerd keep up the good content, can’t wait to see you progress on and create fantastic projects and meet unique people

Thanks for this video. Can you share your slice profiles for the Vyper? It would be a BIG help. Thanks!

Better get into this cool video

Very nice

Nice discworld reference!

I was just enamored with that filament. Get to the description to see what it is and.. I already have it. Of course I do. Gotta print one of these in it, I guess!

Great looking print, but the star is that t-shirt, I love it

I feel like that speckled filament is great for hiding layer lines or those prints are top notch 👌

@OldCurmudgeon3DP

2 жыл бұрын

I'd lean toward the former until the printer is tuned. Then the latter comes into play. The surface finish on the TARDIS was meh at best. The phone stand looked good. Any (unpainted) FDM item can be picked apart. Like he said, we're pushing molten plastic through an orifice. Just how much precision can we realistically obtain.

High Five ✋ Great video. What an ingenious design!!

That fillament, im started liking it, it's look nice🔥👌💕👍

Looking forward to getting my replacement stress sensor, so I can level my Vyper again. The initial results were great, but then the sensor failed.

I've had 4 Anycubic printers: 1) I3 Mega, I learned a lot, but not enough to avoid damage. Donated to High School, they got it running! 2) I3 Mega, I learned not to solder on live circuits! LCD smoke, don't breath it! Junked. 3) Anycubic Kossel (early edition). We do not speak of such things. Junked. 4) Mega X...longest term 'every day' printer, so far! My 'side-printer' these days is a MINGDA Rock 3 Pro. You're in Seattle? Me too! I have this idea about how to eliminate retraction in Bowden systems. Tiny servo at the hot-end plays with the location of its Bowden fitting relative to the nozzle. Extruder motor simply pushes filament or stops, no retraction! During a print move, servo pushing the Bowden fitting closer to the nozzle, flow will accelerate. Linear advance while speeding up. Once the hot-end is up to speed, the servo holds the fitting in position. Nice steady flow. Servo pulls fitting away from nozzle during print move, nozzle pressure is reduced. Linear advance while slowing down. Pull the fitting back quickly while stopping the extruder, retraction. Filament will not be passing through the extruder gears over and over, which should improve delivery accuracy. BONUS: Modulate the servo with 'video' data during print moves, and the line width is modulated. Paint pictures/Logos on your prints, lithophanes. Robert is you parents sibling.

Things I never knew I needed until @3:33 - a box of Joel-Os.

Classic clockspring

Like the chubby little singer! Graceful!

@3DPrintingNerd

2 жыл бұрын

I wish I was as cool as her

Folding models are amazing, I hope I can print one on my Ender 3 V2. If I can find another folded model I will print it and show it on my channel as an timelapse. Keep up the good work. HIGH FIVE from Sweden.

My dirty dishes go directly in the dishwasher. 😉 Great looking print though and cool design from Clockspring.

@woodwaker1

2 жыл бұрын

I agree - why have a way station for dirty dishes - right into the dishwasher

@3DPrintingNerd

2 жыл бұрын

Well, if the kids haven't unloaded the dishwasher yet ... ;)

My Vyper had the auto leveling fail. Customer service was excellent though! And the replacement part is on the way. They believe it was the strain gauge. Easy fix. And it kept the original leveling so it's still printing well.

Good morning from Greece Joel!

Great printer. I ordered one and I guess I have one of the first ones with the problems. Excellent customer service and trouble shooting! Sending me a new hot end, sensors and board all under warranty. Once I get them and have my printer running I will definitely be trying your tips out. Thanks for your fantastic videos!

Nice print, nice filament, nice fix. It's a nice.

@3DPrintingNerd

2 жыл бұрын

YOU ARE A NICE

@rcmaniac25

2 жыл бұрын

@@3DPrintingNerd ❤️

It looks like it needs a Linear Advance calibration, if it supports Linear Advance. The bulged corners are an indication of that.

I want one of those phone stands

@3DPrintingNerd

2 жыл бұрын

They are cool!

im a plastic CNC machinist and 95% of the work we do is +-0.1mm that cube is really good for 3d printing

499k Subscribers! So close! Love the video and the @Clockspring 3D choice! Pre-Grats on hitting 500,000!

@3DPrintingNerd

2 жыл бұрын

THANK YOU!!!!!

Hi Joel have a good sunday

Gee a Neil Patrick Harris quick clip LOL

Hello sir, do you have a review of tronxy bicolor 3d printer?...

It would be nice if there was one more gear added that would actually grip the phone in the stand

I just bought the file from myminifactory, printing now, this will be the longest time I ever printed in my ender 3 pro

Sparkle/glitter filaments hide print defects so perfectly it's crazy. Even with that blue sparkle filament I'm seeing major ringing and z banding. I would use a light color filament without this additive to show the print performance of a machine. Otherwise great video, keep up the amazing work!

@3DPrintingNerd

2 жыл бұрын

Oh for sure. Bland boring colors for true printer tests

On the e-step calibration it is going to be extremely difficult to get the exact amount you are extruding. I always have to print a hollow cube with double walls to correctly set the flow rate in Cura slicer to compensate for the offset. As for the bulging corners you may want to increase your acceleration and jerk speeds in your slicer. On my Ender 5+ I had to nearly double the acceleration and x4 my jerk speeds to negate the corner bulging. I never had much luck adjusting the junction deviation values, but have seen that work for some people.

This is a lot of plastics just for a stand .... but damn it's REAAAAALLY amazing !

I love that you cater for us Brits buy saying 'z or zed'! Love from the UK

@michaels3003

2 жыл бұрын

What about Australians and Canadians? It is not all about Brits...

@InterdimensionalCabal

2 жыл бұрын

@@michaels3003 I mean, the Australians and canadians are really just british colonies. Praise the queen etcetc

Love the Vyper i already have over 50h print time

@3DPrintingNerd

2 жыл бұрын

That's great to hear!

You're still getting corner bulge, does it support linear advance out of the box?

@3DPrintingNerd

2 жыл бұрын

That I do have to look into.

Love it , Joel can you say how long it took to print . Thanks

@3DPrintingNerd

2 жыл бұрын

Oh shoot. It wasn't horribly long. I had it print overnight.

Still waiting on my cubic vyper

I’m so new to this I haven’t even received my vyper yet Could you do a step by step (or pdf) on e step test and fix Thanks again

@3DPrintingNerd

2 жыл бұрын

ooh I may try to get that done. that's a good idea.

@user-wk5yy5dx9k

2 жыл бұрын

@@3DPrintingNerd Please do! I have the same issues with roundy corners and have no idea where to start.

Well.. putting dirty dishes in the sink is not enough, we need to wash them.. hahaha

how do you get the stl. I am new to all this

Did you wear the planets shirt to go with the planetary phone stand?

@3DPrintingNerd

2 жыл бұрын

MAYBE HAHAHAHA

Clockspring does it again!!!

Decent print. Can you print it on the Disney machine to hold a flatscreen?

@3DPrintingNerd

2 жыл бұрын

hahahahha OMG. OH MY GOODNESS.

phonestandstic

The flat earth turtle got me 🤣

@3DPrintingNerd

2 жыл бұрын

Sean said, "I _had_ to do it" and it was PERFECT.

@CosplayKitchen

2 жыл бұрын

I am glad I am not the only person who found joy in the flat earth turtle!

You should start a competition of robot wars with pla. 😆

Is the ender 3 v2 a well pefroming printer?

@3DPrintingNerd

Жыл бұрын

When I had one it did a good job.

It would like it to rotate landscape and portrait.

where do I get that shirt?

Can't get the STL, the website is broken, I try to create an account and get an error every time.

Still need to tune PA or LA.

Reminds me of Fab365 models, he makes a lot of print in place foldable items.

@3DPrintingNerd

2 жыл бұрын

YES! Those models are AMAZING

Any possibility to share your profiles Joel

I learned today that CHEP stands for Chuck Hellebuyck's Electronic Products 😆. I had no idea lol

@3DPrintingNerd

2 жыл бұрын

heh, the ORIGINAL channel name!

Any idea that is the best enclosure for the vyper

@3DPrintingNerd

2 жыл бұрын

For enclosures I usually talk to Dave at Printed Solid

@craiggordon2502

2 жыл бұрын

@@3DPrintingNerd Thanks I emailed there support on that site.

Dude my dirty dishes in the dish washer. Geeee

What about holding the phone in landscape mode though?

@calamityjaycantebrigge

2 жыл бұрын

Also, I just sliced this in Cura. 1 day 5hours 55 mins to print!! Not something I'm really willing to do without knowing if it will hold an iPhone 12 Pro Max in landscape.

I don’t know how but my ender 3 printed the calibration cube at exactly 20x20x20mm. Lol.

Don’t forget to rinse dirty dishes before you walk away. Lol

Estep? I only speek rotation distance

@obiwan007

2 жыл бұрын

Unfortunately that has not hit the "you are still on Marlin?" community yet...

@3DPrintingNerd

2 жыл бұрын

heh, believe me, Klipper is on my list

@obiwan007

2 жыл бұрын

@@3DPrintingNerd You will love it :) Together with Mainsail it rocks...

I love your shirt. I don't care what the modified textbooks say, there will always be nine.

This would have been one of those prints that u also should have used the palette 3 pro

@3DPrintingNerd

2 жыл бұрын

Believe me it's on my list.

@toddcoello6461

2 жыл бұрын

@@3DPrintingNerd I have mine on pre-order and can't wait to get it. That's why I'd love to see more videos with it..

The ads I had were this is a switch bike, this is a switch bike, (skips ad) this is an any cubic viper

so... how were you over extruding if you only extruded 90mm on a 100mm extrusion?

@3DPrintingNerd

2 жыл бұрын

Yeah. Some sort of dark magic probably

Why does it need the planetary gear set? The bumps are all that need to hold it in place, no?

@3DPrintingNerd

2 жыл бұрын

They are they because it looks super cool

SCREENS DIRTY! it’s a phone….. Lmfao.

I hope somebody with 3d modeling skills makes a printable Saint Chuck statue.

@3DPrintingNerd

2 жыл бұрын

I believe this was suggested on Twitter as well :)

whoo hoo like number 700 I like them even numbers

@3DPrintingNerd

2 жыл бұрын

Even numbers like YOU!

My Vyper worked well for about 3 days, then it wouldn't give a good print, thanks to the folks on the Vyper Facebook forum I was able to determine the screw on the large gear in the extruder was loose, then Thanks to Dr. Vax KZread "MakeWithTech" I was able to re-calibrate the extruder and the temperature of the nozzle and bed--now it seems to be very good

@3DPrintingNerd

2 жыл бұрын

That’s great to hear!