The view from the camera of the tractor coming toward it was beautiful! The lighting through the trees and the shadows was stunning. Great work, Mike! What a wonderful way to start the day.

Another good one! I would have guessed that tree had been dead 3-5 years but I also know that you know a lot more about firewood than I do. Moisture meter sounds like a good Father’s Day gift ❣️ Marcus from Chesapeake VA.

I have been cutting, and burning wood for about 50 years, and the only wood I have found that will dry on the stump is Sycamore. Ash will burn green, because it has a low moisture content, but still does way better dried.

There's nothing like the smell of a rack of fresh split oak drying in the summer sun.

@oldmanfred8676

4 жыл бұрын

mcycle12, Some people hate the smell! I wonder what is wrong with them? I don’t trust them!!!

I cut, split and burn mostly White Oak because we have an abundance on our place in Northeast Ohio, but for me "Seasoned" means cut, split, and stacked out of the weather for at least a year. My experience with "standing dead" is a cold smokey fire with little heat.

Good morning Mike. Have a great day. God Bless.

Thanks for the tip !!! Great to know the range for dry !!! Hello to Hunter !!!

Mike going old school with the double bit axe. Buckin' Billy Ray would be proud.

@brendanmalone2400

4 жыл бұрын

7úsx we

Great video! Thanks for clearing that up!

Mike - Great information regarding moisture in trees, even those that are standing dead trees. Wish I had known about moisture meters back in the 70s and 80s when I was heating my home with wood in Missouri. I had a flu fire as a result of burning green wood, and chose to purchase from a different guy from then on. The second guy was honest, and we did a fair amount of business over the years. Blessings to you, Melissa, and your family. Hi Hunter - always great to see you and your sisters in the videos.

I learned something in today’s video about the moisture content of firewood. Thanks Mike!

Great way to start the day with a little knowledge. Have a wonderful day!

Mike you are so right about the moisture content in firewood. We burn a lot every year, occasionally the wood will be seasoned. Most times we have to let it sit for a year.

Good morning Mike, really good advice about the moisture meter 👍👍. Looking good around there, got lots of wood to be harvested so you all will be busy all summer around there with all your planned projects. Thanks for sharing with us. Fred.

Greetings from Central NH (Lake) - Good video, major misconception about standing dead. Thanks for passing along the real situation.

Great video.....yes, Red Oak is a very dense wood and holds moisture longer then most hardwoods, even standing dead. But it’s shows most wood holds moisture longer, the closer it is to the base. Not much can beat a good moisture meter...the best way to tell. Thanks for showing the real deal! 🤴🏻👍🤠

I learned something new today. Thanks Mike

Glad you guys like firewood propane guy here after growing up cutting wood with my dad. Turning the thermostat on the wall is a beautiful thing don’t miss it one bit

That was a good demonstration Mike.

Good information, thanks for sharing!

Not dry but alot harder to cut. In NE Ct I cut standing dead red oak and it is like rock compared to green wood. Great topic.

That makes sense Mike. Out here in Alberta we are semi-arid in the foothills of the Rockies at 4400' ASL. We get Chinook winds all year around and once a spruce or pine dies it is dry and ready to burn in two years. On the other hand trembling aspen or black poplar, which is a cottonwood type tree, will NOT be ready to burn as standing dead after two years. Once wood is split and stacked here with the dry air you can season wood in 6 or 7 months in the summer. Like you said depends on where you live.

Have a great day guys. Today is my wife Joyce and my 48th Anniversary and what better way to do it than watching outdoors with the Morgans.!

Good morning everyone!

Great Instruction on dry or not dry wood !!👍👊

Love your videos Mike! Keep them coming!

Nice demonstration. Have a great day.

Dead standing trees in my area, the PNW, are usually dry in a couple of years. We mostly have soft woods like pine, douglas fir, white fir and western larch. I have found that the lodgepole pine will dry the fastest if cut dead standing. Its a fair firewood but can burn quickly. The local preferences are the doug fir and larch which burn much hotter and longer.

Good information, Thanks

Mike, enjoy the videos. I have a 271 Stihl and it is therapeutic every time I have an opportunity to run it. I had the honor of getting a lot of training and tips on chainsaw operation from a very renowned chainsaw trainer. I find myself watching how others operate their saws. I noticed that you tend to have your left thumb on the handle rather than around it. As much as I prefer that way also, I have found it to be much better to wrap the thumb around the handle as recommended by all operation trainers. Safest way to operate.

Great video. I learned a lot!

I am selling firewood as fast as I can get it in. Around here if the bark is off, the top 1/3 of dead standing oak trees is ready to sell. I cut up the limbs too. Those are usually quite dry down to the first "Y" of the tree. The next 1/3 is around 24 to 26%. It is ready in a week or two once its split and stacked. The bottom is around 30 as you showed on your video. That can take a long time to dry. If the bark is on, it has a higher moisture content by far.

I purchased that exact same meter after watching the video by Life In Farmland. I love removing the guesswork but mine seems pretty spiratic. Different readings when checking the same spot on the same peace of wood several times.

MORNING MORGAN'S. HAVE A DAY!

The only standing dead tree I would say is good to burn in our area, SE Wisconsin, is dead elm with no bark. I consider it emergency firewood. Our only heat for nearly 40 years has been wood. There have been a few occasions where standing dead elm got us through the winter. It actually burns a little better to get it under cover for a week or two after cutting before burning.

@ryanemerry

Жыл бұрын

In SE Ohio, dead barkless Osage Orange is very dry and burns hot.

Great topic, Mike. I know a lot of guys fall over themselves to get that wood. Looks like the lesson is no rush needed! 🪓🪓🪓

@jimmyandkathyharrell

4 жыл бұрын

Just curious. Why are you concerned about the moisture when you won't be selling it for quite awhile?

@mrgremer357

4 жыл бұрын

Jimmy and Kathy Harrell really? The whole time he did this was to show the moisture content in that log. At no time was he saying he was gonna sell it. Totally an information video for those not as experienced in the woods. I found it very informative, and feel if an emergency I could cut a standing tree down and go to the higher branches to burn.

I'd place the lower section on the bottom of the wood stack and the top on the top. Hope to find dryer trees/logs along the time. Not a bad summer start !

Mike, here in central Missouri we use a lot of exterior boiler type heating systems with very little chimney so less worry about chimney fires and folks burn that wood all day long as it burns slower and plenty hot. However those who have indoor stoves or fireplaces and even wood furnaces are more careful. Best system I saw was I guy I use to help years ago and we never cut wood until the sap was down so fall/winter cutting. He always would ring the trees he wanted to harvest in Feb when sap was down and let them stand a year dead. Next year we would cut firewood and haul. At home he would split, stack, and cover with barn roofing. When we were done cutting all that he had ringed the year before, he would ring the ones for next year. Meanwhile the ones we split and stacked would air dry for another year before burning to finish off the drying. So yeah, standing dead still needs to be split and such to finish off the drying but that year of standing dead got it very far along the way. And maybe feed a few woodpeckers along the way. Of course he was "improving his woodlot" by harvesting the lesser trees to give his prime lumber trees less competition in order to make more off of his timber harvest which was usually about ten years apart depending on lumber pricing when ready. PS here in Missouri the vast majority of firewood is oak and hickory. Hard to sell anything else except for campfire wood. Personally I kind of like to throw a stick of cedar in once in a while for the aroma.

@markpashia7067

4 жыл бұрын

One other thing. A few folks have figured out that the left over tops of a timber harvest of walnut can make for some easy cheap firewood also. They leave a lot because the tops twist and turn on the mill when trying to make lumber out of walnut. They leave most everything about eight inches diameter and smaller. Walnut does not have as many BTUs but burns nicely and decent heat, so if free it is worth it.

Hey Mike I absolutely agree with you on this. I do think once the wood is cut and split it will dry much faster than a it’s brother that was cut live. Never did a meter test to compare, but that’s my impression after cutting my own firewood in upstate NY since 1977. Great video as always!!

Awesome advise and very true. A meter will eliminate 1/2 of the firewood sellers. So many selling seasoned wood and surprise it’s NOT seasoned. Mike you touched on another important fact geography/climate. These are definitely different by location. The moisture in the air effects the drying time to cure or season. Well seasoned wood may require mechanical ventilation to aid in that process as well in some areas.

@markpashia7067

4 жыл бұрын

In my neck of the woods, it would wipe out about ninety percent. They cut and split in the woods and then load it sell to avoid handling it more. So it is up to the buyer to stack and dry if they want seasoned. But I guess that is ok if the price takes that into consideration. Firewood is much cheaper here than in the city an hour away.

Bark holding on to the bottom part will hold more moisture in. Figured it should be higher. Nice comparison Mike. Keep up the great content ✌️

The ole Red Oak is the King of hangin on to moisture...I've seen many people think a standing dead tree just like that can be cut & burned same day...lol....nope! The other mistake people make is thinking they just need to buck it up & it will dry, nope... larger diameter rounds have to be split to properly season. 👍😎🍻

@alkaufmann2039

4 жыл бұрын

Regardless of the diameter I always think it's good idea to split. Makes drying 100% faster.

@markpashia7067

4 жыл бұрын

Yup, those centers must be exposed to air. They hold moisture as long as they can. Cannot finish until split.

@alkaufmann2039

4 жыл бұрын

@@markpashia7067 I don't care if it's 3 inches in diameter. I still split it! I agree with you 100%

Left thumb around top chainsaw grip! Thank You!

It is seasoned its just water wicking up the tree. Once the tree is felled and it cant wick the water dampness will disappear in no time. Tree sap on the other hand takes a lot longer.

Great video Mike and I was wondering the same thing. I have a standing oak that died last year and was thinking when to drop it. I have the same moisture meter as well. Be safe out there and God Bless :)

Hi Mike. I use same moisture meter and prefer to get down to 15% in oak and 20% in ash. The 2 most common wood I burn here in SE Pa. Have about 120 ash logs to buck and split due to ash bore.

Mike, consider splitting this and then testing it every 10 days or so to show the rate of drying. Perhaps even compare it to a green split round. In central PA many of the oak burning folks like their wood to be cut, split, covered, and dried for 2 years prior to burning.

@maryblaylock6545

4 жыл бұрын

Same thing for a lot of folks in Minnesota. Less creosote in the chimney.

@waltermattson5566

4 жыл бұрын

@@maryblaylock6545 Mary what part of Mn. are you from? I am near Cloquet.

@dougsmith9099

4 жыл бұрын

I have a old wood/coal furnace not air tight like the newer ones the older gentleman that put my flue liner in told me years ago seasoned wood was ready in 6 months. I cut mine a year in advance and sometimes if I need a load in a pinch I will cut a dead oak or ash and burn it with no problem. Like mike said u can tell as soon as u cut it if its to damp.

@mikeadams2339

4 жыл бұрын

Yep depending on the weather that could below 15% in a month?

@maryblaylock6545

4 жыл бұрын

@@waltermattson5566 Twin Cities. I haven't been to Cloquet in about 15 to 20 years. We got rain very early this morning.

Great video! Love the info on firewood. Keep up the good work!

Hey Mike, Most of my standing dead trees have been Ash and Cherry and the have all read below 20 on the meter. I believe the red oak takes longer to season.

@LightSpinAngler

6 ай бұрын

This man has no clue what he’s talking about. Always trust your own gut and do your own research. Oak always takes 2-3x longer :)

That was a great video, thanks 👍

great job

Good info. Thx

You sure can give some great advice. I got me one of those meters , works great takes all the guess work out 👍

Very good information. Did not know this.

Great video, good information, thank you.

The bottom will always be wetter, the tops of trees die first, and sap gets pulled to the stump trying to save itself. It’s why fatwood is made of pine stumps, that’s where all the pine resin is. Also, as you know, the bigger the wood, the longer it takes to season. Once it’s split it will dry fast. Good video.

Nice video & tip. Some people will burn wet wood and be upset with all the smoke or the fact it won't burn. Stay safe

The red oak was brilliant red and smelled fresh

Mike, thank you for posting a link to the moisture metre. I have been trying to find one of those in my area for a while and nobody has one like that. Just ordered one thanks again.

Hallo morgans your new video right after work that rocks the day

Mike I seen right away like you that the second piece of wood was wet , but the first piece I wood put it into a fire that is going pretty good, the heat from the fire will dry it petty fast and also it will last longer.

Good discussion.

Need a dump trailer like you had before

After watching this video, I was curious about a standing dead walnut tree that has been standing in one of my fence lines for about two years. After I took it down, I cut a section, split it and tested it with a moisture meter and was quite surprised to find that it had a moisture content of 15 percent. This is probably due to the fact that since it was in a fence row surrounded by open fields as compared to the one you had that was in a shaded woods.

love the instructional videos

Like your blooper at the end. Melissa will get a chuckle. Great video. Interesting about the moisture content.

I have cut a lot of those standing dead red oak at our property in upstate NY . Once those logs are split and put out in the sun they will be below 20 percent moisture within a month .

You are so right Mike. I have my trusty moisture meter and when I go to see about firewood (if I buy any) I check the moisture content before I make any decision. sometimes the seller gets a panicked look on their face when you pull out the meter. lol Have a day

Good One will go out and get a moisture meter.

Great stuff Mike, thumbs up 'cause its a good video!

Good morning Mike Great video very interesting topic , learned something today ,. Hunter , have a day .

Very true Mike, some of the wettest wood I have handle is dead Red Oak. And that almost all that I cut. I seem to lose that weight fast, once you split it.

@markboettcher9443

4 жыл бұрын

And it loses a lot of weight as It dries.

Nice one Mike nice looking axe too

Just my opinion. I think the statement ready to burn means. A standing dead tree is ready to burn after a few months drying out. A dead log will loose the little moisture it has very fast. If you don’t have a moisture meter you can do the old take two pieces and snack them together. Lol Very big difference of sound when two dry logs are smacked then when not ready to burn are smacked. Great videos. I like and appreciate the frequency of you doing so many. I almost always can count on one when I wake up with my coffee. So what’s your opinion on the grapple? I remember it didn’t seem to work as well as the other one. Or maybe you addressed this and I just missed the comment.

Great content Mike. Work safe my man.

Does it make a difference if you put the moisture meter on the end of the round vs the inside of a freshly split piece?

Just purchased a sthil 291 from my local Rural King today

i did a video about moisture meters and how essential they were for firewood production / buying , my god the negative comments i got were unreal

The dead gray limbs on standing red oak are the best biscuit wood you’ll ever find.

Great video Mike. Not sure ide want standing dead firewood in my house anyways, it died for a reason ... Ide sure hate to find Insects roaming around my living room one morning lol.🤣

Hello, i gave a few red oak here in Sardis City, Alabama that ill be cutting down soon. Do you think those kinda trees would make for lumber?

Mike!!!!😆 Nice.😆 mate

That was interesting!

Good evening Hunter ;-)

I found a few of them call them bleached bone wood no bark on them and their bleached white never had a problem with them straight to the wood burner when you hit them together they sound Halo. Maybe was lucky nice video

I can vouch for oak, the limbwood may dry in a year or so but anything over about 4 inches will not be dry in a year, over six in two, and that is without the bark. Oak dries about 1-1 1/2 inches a year and some species of oak start at almost 50% moisture.

Definitely a moisture meter does help but I don't sell wood I gave a couple of loads to my neighbor and we just burn it I can kinda tell if it's seasoned or not thanks for the video mike

I can tell if it is "dry" or not but that meter takes all the guess work out for sure. I may be investing in 1.

@matthewsims359

4 жыл бұрын

I have the same one that moke has and i love it. I try to burn under 15% moisture.

Excellent video. Thank you for sharing your experience. I know you’re not an expert but, damn, you are the closest I know. Honesty goes a long way.

I’ve just started cutting up a fallen tree that has been down for 30 years and was in the range of 30’s, 70’s and 80’s. This tree is an Australian hardwood “Gum” tough as nails! It looked in the same condition as your tree did, but a bit bigger in size and approximately 150’ long and approximately 4’ dia at the base down to about 2’ dia at the top. It’s taken a bit of doing to cut it up, but I’m getting there. Hopefully it burns ok when properly dry? The moisture meter really comes in to a class of its own In these situations. Thanks for sharing your video.

Have you considered a smallish trailer for hauling rounds.

Good luck 👍

When you cut a live, healthy tree for firewood, what would that one read on the moisture meter?

I use a lot of standing dead red oak for firewood. Need to split and let dry out. Also watch for ants!!!

Nice information Mike .... Nice information Mike. Ha

Hello From Chicago! How will the wood dry in that big pile compared to you stacking it? It would seem like it would take much longer but I have no idea.

Mike, Good to see you haven't forgot how to split wood with an ax. No hydraulics needed.

@markpashia7067

4 жыл бұрын

Not so sure about the "no hydraulics" part. Seems like my heart is pumping pretty good when splitting by hand!!! Just a different fluid.

The worse thing about cutting down a completely dead tree, like a green ash, is once it hits the ground, all the smaller branches just shatter making an awful mess to clean up. That is why I prefer to cut down a dying tree as it keeps most branches intact or really close to the tree after it has fallen.

Thumbs up Mike

I cut standing dead every year. I cut two or three weeks worth and burn it and go get more. I stay away from oak cuz it does take a few days to dry. Hickory is my favorite. From the woods to the stove with no problems. I burnt 12 cords every year if that means anything