nice, hard working people with very much skills on old machines !!

They have to be admired for their ability and working in those conditions. Hats off to you guys 👌

@soldatec3446

9 күн бұрын

🙋‍♂️🤲🇧🇷 SÃO BONS PROFISSIONAIS MAIS DEIXAM A DESEJAR NA LIMPEZA TANTO DOS MATERIAIS COMO DAS FERRAMENTAS O TORNO E UMA MÁQUINA DE ALTA PRECISÃO PARA FABRICAÇÃO DE PEÇAS ENTÃO DEVERIAM MANTÊ-LA MAIS LIMPA OS BARRAMENTOS CHEIOS DE LIMALHA PODERÁ HAVER UM ACIDENTE TECSOLDAMCZ RIOS MACEIÓ BRASIL

@geoffankrett7012

9 күн бұрын

@@soldatec3446 I'll take your word for it 😁

Recycling like it should be , When I was a youngster there were thousands of factories and worksites with highly skilled tradesmen and apprentices just like these all over the UK , now you'll be lucky to find anyone,much less an apprentice.

@jenifferschmitz8618

4 ай бұрын

so many skills were not passed on apprentices were vital

@ZygmuntKiliszewski

3 ай бұрын

Yes, the good old school of craftsmanship. There will probably come a time when we will respect disappearing professions. Congratulations and best regards (!).

Ótimos profissionais, ótimo trabalho parabéns

Great show, with good filming. Thanks

Uncle Rodger would approve this recipe. "Dont measure, use feelings!"

I have a 1930`s American Lathe in my garage. Still very accurate. I bet it last`s for hundreds of years. 7 inch Le Blond.

This is a great example of the value of a workers union

@jackstanton8212

5 ай бұрын

Rubbish --unions killed manufacturing in the UK & OZ

Thank you very much sir , everybody try to hide but you........

Thank yoy for filming and posting - - nice to watch ! Sorry to hear from HH comnents that this workshop is winding up. I wouod hope that such workshops would continue and be profitable for management and workers alike. ❤😊😊

look at the tailstock centre jumping up and down.......a bit of accurate turning here.....

khét đấy .like

I can't believe how they parted off that newly screw-cut shaft, crow bar and big hammer! however these guys do have some great machining skills but haven't they heard of cutting oil/coolant.

Excellent

Excelentes trabajos mis hermanos saludos desde Monterrey NL México 🇲🇽y les mando su poderoso like 👍

@hydraulichands

3 ай бұрын

¡Muchas gracias, hermanos! Saludos desde Monterrey, NL México 🇲🇽. Nos alegra mucho que disfruten de nuestro trabajo. ¡Y gracias por ese poderoso like! 👍 ¡Estamos muy agradecidos por su apoyo! 🌟

❤

Let's write up this bill. Let's see... 325 kilograms of steel, 365 hours labor, two apprentices, large part handling charge, shop materials, and tool sharpening. That comes to $17.35. This is impressive work. ❤

Si funciona, toda tecnologia es buena.

Amazing!! Enjoyed all of the creativity and workmanship. But man, no safety shoes, no safety glasses… but according the age of some workers it appears accidents never occurs? But enjoyed all of it

@user-nh7wo8px6k

4 ай бұрын

Workmanship is doubtful, the amount of abuse those lathes take is criminal. The simple task of setting the tooling is a hit or miss.

You can't beat having the right tools for the job. I'll bet that steel rule is marked in thousandths of an inch.

@klausreichert4139

3 ай бұрын

🤣🤣😎😎

@swarfify

3 ай бұрын

Another moaning minnie. Perhaps you never noticed.THE JOB GETS FINISHED and WORKS..

What do they do with all the shavings besides pile them up and overfill drums? Amazing

@hydraulichands

3 ай бұрын

Ah, the eternal question of what to do with all those shavings! Well, funny you should ask... we actually sell them as avant-garde modern art installations! 😄 But in all seriousness, we're always looking for creative ways to repurpose them. Maybe one day we'll unveil our masterpiece made entirely of metal shavings! Thanks for pondering the mysteries of our workshop with us! 🛠️🎨

OSHA would have a field day in the US if they ran across something like this ! These men have skills .

@patricktinley1000

4 ай бұрын

Safety is our least priority…no safety glasses and I’m willing to bet most them are wearing sandals

２年前そうだよね☺️頑張ろう‼️

I always find it kind of repugnant when people assume that just because its old that its not accurate doesn't function well, that if its not computerized and shiny . Why would they be in business if they were producing machined components that didn't meet spec. I see micrometers, machinist rulers, and calipers being used. Just as anywhere else would be used. I have a lot of respect for this team of machinists, hobbers, and workman, in a less than ideal environment. I just wish they still taught this in high schools, instead of focusing on gender, and pronouns. Great job guys, you represent a nearly lost art in the US.

We get loads of scrap crankshaft every week off CAT etc. They just get melted down. We should send them to you lot to do up.

I’m curious about two things. What are these roller mills are used for and what is the fuel used in the ovens?

@muhammadanassiddiki5753

4 ай бұрын

those rollers most probably are going to be used in concrete reinforcement rod making factory and the fuel used is may be HFO/used lube/other oil.

We used to do work like that in America. Big AL the working man's pal would chew you out for using high speed steel. Ten pound chip loads. Get her done!!

Some people do not understand that a hammer is a precision instrument.

Where is this shop?

I would LOVE to see some "college" students working like this for their room and board. They would not live long.

Your cutting tool is not being reinforced properly. You could clearly seed cutting tool deflection!

miss the guys I hope they are all well peace to you

Donde se puede comprar de esos tornos ???

What is that big thing they’re repairing?😊

يستحقون الاعجاب وخاصة الرجل كبير السن

Safety Glasses >> Or maybe these guys have Spare Eyes at home !

Scoff at their system of working if you will, BUT could you do it? They could cut a Learjet out of a solid lump with a blunt chisel and a hammer!

@GRIMRPR6942

2 ай бұрын

Well since you asked, yes i could do it. I've been making gears and pinions of that size and much much larger up to 16 feet in diameter for over 30 years. So i can very easily scoff at their system of working. It cracks me up seeing comments proclaiming that these guys are "skilled craftsmen" which couldnt be farther from the truth. Their attention to details like surface finish and damage on the tooth lands and roots, run out, tooth geometry, and case hardening is laughable at best. What they are doing is a 1st year apprentice level skill set.

love the tight tolerances used here. 🙄

Where's the eye protection as in safety glasses/ goggles?

I love to see how Industreus the Indian people are. You can literally make somthing from nothing, fix things that most would toss away.

@rahulshenoy16

5 ай бұрын

Not india. It's in Pakistan

@007007niki

5 ай бұрын

@@rahulshenoy16 sorry my mistake

@jitukelkar

5 ай бұрын

I find many videos featuring Pakistani machinists and am always amazed by their skills and saddened by their equipment. thses guys deserve better equipment.they can do wonders with them

@rahulshenoy16

5 ай бұрын

@@007007niki but very nice to see their hard work

Это коллектив джедаев, измерения на глаз по шаблону по чуйке, так только спецы могут создавать шедевры. Снимаю шляпу.

Where can I buy some of that vernier chalk? 🇬🇧

@hydraulichands

3 ай бұрын

Ah, the elusive vernier chalk! Unfortunately, it seems to be a bit of a rare find these days. But who knows, maybe it's a hidden gem waiting to be discovered in some old-school hardware store? 🛠️🔍 Keep searching, and if you happen to stumble upon it, let us know!

@stevemorris6855

3 ай бұрын

@@hydraulichands just a thought, maybe it's digital chalk..

If they would remove their tops and bottoms, twist them until some of the oil and grease came out and to use it on their machinery instead of using hammers, pry bars, and chisels to make their equipment move easier, amazing

@hydraulichands

3 ай бұрын

Well, that's one way to lubricate machinery, but we might start a new fashion trend in the process! 😄 In all seriousness, we appreciate the creative suggestion. We're always looking for ways to improve efficiency and ease of operation in our workshop. Thanks for thinking outside the box with us! 🛠️👕👖

Видим полное отсутствие культуры производства, ТБ. Шов сварного великолепен:\(

21:00 Looks like it's a hundred years old technology turbine shaft.

Rzeźnia.

Webster Bennet still going strong

White lead! A hundred year old technology.

Un bleu de travail ça serait mieux plus pratique comme vetement

17:06 tuvo suerte.....la esquivó...esta vez.....seguro que muchos no la tuvieron y perdieron el ojo...que barbaridad...ni unas simples gafas de protección...bueno...gafas ni nada...protección cero.....

Equipment is made with soft metal won't last long

WIW

Que mal acabado de la rosca exterior del eje 🧐 a mi me la tiran por la cabeza 🤔

Mein Gott , die messen mit Außentaster und Lineal wie im alten Rom , haben die keine Schieblehre , wie soll den dabei ein exaktes Maß rauskommen ? Sagenhaft .

Criticize criticize criticize is all the westerners do, the country is making for their own use, so why import when it can be made much cheaper and according to their own workmanship.

I've inquired a half dozen times about where this is exactly. I can supply machinery.

@hydraulichands

5 ай бұрын

To clarify again, I visit different machine shops for my channel's projects, neither of those workshop owned by Hydraulic Hands, i asked the owner about your inquiry, they said they are winding up the business, and they didn't showed any intrest, sorry abt that.

@RobertWilliams-mk8pl

5 ай бұрын

Thank you for your attention and response. I enjoy your channel @@hydraulichands

1:11:11 это твердомер такой?

Why no safety glasses?

@user-vp7ri7yl6y

Ай бұрын

Only cowards use protection gear

Skickliga karar med enkla medel!

Живу на Украине...В молодости сам работал токарем...Скажу так...У нас таких специалистов уже нет. Старики умерли, смены им 30 лет нет. Работать некому.

@user-gq6ks8tw6t

27 күн бұрын

Снаряды то точите ? Я слыхал что Англичане заказали 155 мм в Пакистане надеюсь их не так делают !

👍👍👍👍💪💪💪💪👏👏👏👏♥♥

India is so far behind they'll never catch up...

for gods sake, clean up your workplace!

You think America workers would be able to get away with with working in this type of environment!!! 😂 if we did we would have all kinds of industries in America!

@user-nx6qr1mt6f

3 ай бұрын

Nah, the EPA and OSHA would shut it down overnight

@ferminvallez25

3 ай бұрын

😊​@@user-nx6qr1mt6f

@raymondjarvis765

2 ай бұрын

That's why modernization..also less Injuries to workers as that old stuff was not exactly the safest to be around and with the state of the health care system if you got injured back then you were hooped

@danielelliott3659

2 ай бұрын

I think we already did. But we evolved

@Reaperofwind

6 күн бұрын

It’s the labor costs that makes it prohibitive.

Are these ied's