👍🏼Exactly what I needed to learn. Thank you.

Best explanation of clutch/ driver and driven pulley ops and tuning I’ve see so far… Thanks

This helped me a lot. I didn't know what I was doing and bought a bunch of Chinese junk not realizing. Now I am doing the backwork and "modifying" my Chinese junk. Lol I know the metal and welding is better on the name brand things. As thing fall apart I will be replacing with quality products. Thank you for explaining this. Just got a bloody go kart and it's nothing like a scooter. You should of seen my face when I realized there were no rollers. I was so disappointed. I had all this gear but couldn't use it.

I have a creative mind, and it's hard for me to explain certain things, but you nailed it for me. Thanks.

Really nice, even the cats! Lol I was going to release my video last week too but I tried a smoke rings video to see interactions. Very good video! Well done! The drive set for drag racing is often set around peak torque RPM to engage. 👍👍

@minibikegarage1577

3 жыл бұрын

Thank you lol I appreciate it comin from a dude with better content 😂😂👌🏼

@greggunninghamkite1079

2 жыл бұрын

@@minibikegarage1577Both of you made awesome videos!!! Do you think I could drill another hole to stiffen the green spring even more?

Great info dude. Sounds like mostly experience and mechanical knowledge. Good shit

Great video thank you!

You did a great job explaining that help me learn a little bit thank you

You did a good job explaining it. Thx.

Learned a lot off this video that 💯

Lol, f##king cats are going nuts!! Great video brother!

Very informative.

thx for upload!

Do you have a link for the silver driver/torque converter in the video? I need that brand. I seen the symbol and it's a good driver.

Hey bud, great video. My genuine comet setup has been giving issues. Sometimes it will stay in the low speed even at full throttle, and then the next minute it will go into high speed. Always random

Where did you buy the springs? Could you send me a link? Since weeks I am searching for a ccw spring for a 40 series converter and don't find a shop selling them... Best regards

Lol 😆 I just watched this again just for the cats acting up! I gotta link people over to this video next time I'm trying to explain this stuff. I got my Predator 79 to launch great on a torque converter with aluminum weights, blue spring and yellow driven. It's still a 79 but very legitimate at looking harmless....😏

👍 good detail... back ground music distracting ....like watching 2 vids at the sametime.... : /

What is the best way to get the driven pully not to slip? I've tried green, red, yellow on the driven in the different holes and if I go full throttle off the line (on a stock 196cc) it slips like crazy. I like how the yellow in the middle hole on the driven with the comet blue springs on the drive works but it still slips. I've even go as far as add a mount to keep the plate from flexing which did reduce the chatter. I've tried a few belts... is there one that works best? I can't find one of the juggernauts in stock so I ordered a clone on amazon to see if that is better.

Hey you got a part number for that yellow spring?

I really enjoyed your informative video however the background music was distracting and made it hard to hear everything you were saying.

What would be an idea combo for an offroad kart? Tillotson 212 with stage 1, 6" driven. Not concerned about top speed. Need hill climb torque and acceleration out of sharp turns. Any help would be appreciated. Thanks - Josh Norris

@minibikegarage1577

3 жыл бұрын

The tilly 212 and stage 1 will be good but I I would suggest a 7 inch driven set up. There's more torque with it but you have to buy a new jackshaft off nmi karts. That and a 10t jackshaft sprocket and 60t rear sprocket should make it a torque monster. Adjust the driven pulley spring to the tightest position and order a set of 3100rpm stall springs for the driver clutch and you'll have a perfect small block offroader

My TC won't engage at lower rpms, then it slides over into the belt and gives a herky jerky ride. What can I do to make it engage at the lowest rpm for smoothe low end trail riding?

I have a mini XRS with a ghost predator engine on it and a series 30 torque converter what sprocket sizes should I use as well as springs and weights the rider is probably 60 lb so the whole thing combined is still less than 200 pounds machine and driver it's going to be written mostly semi off-road trails and such the tires I believe the biggest they would be is 16 to 18 in smallest 13 in

@minibikegarage1577

Жыл бұрын

I can't really say about the 16s or 1es since I haven't ran em before but. For the 18s I'd recommend a 9/50 or a 8/ 50. A 9t on the front sprocket would make a good street riding set up. The 8t on the front would be good for offroad and extra torque. I'd recommend a 3000rpm spring in the clutch for good response and acceleration. And a the middle spring tension setting on the rear pulley. That should get you started.

Yellow spring is a beotch to get in there with those thick clips they put on them.

Nicely Done. Easy to understand.

I like how you broke it down, and laughed my arse off when you said fukn cats are goin nuts 🤣 If i were to put this TC on a 79cc predator, what springs, weights would you use for a motorized bicycle, with a 44t rear sprocket with 24" rims? Thanks for the video. 🙂

Hey man I just put a go powersports torque converter on my Coleman mini bike. It won’t shift out of low gear. The primary clutch stays open and won’t close to make the belt ride up. Please dear god I hope you have a idea cause this is really aggravating

@minibikegarage1577

2 жыл бұрын

Is your throttle opening all the way and is your pulleys lined up right?

@jaycevessier7554

2 жыл бұрын

@@minibikegarage1577 yeah this bike is a year old, throttle is open all the way.

@iofjupiter

2 жыл бұрын

not sure if this might help....i just might make myself sound like a complete idiot, but......remove the brass ring from the driver....do not use the small driven chain sprocket that came with your torque converter (keep the stock installed)....make sure your thottle is completely tight with zero slack....

@jaycevessier7554

2 жыл бұрын

@@iofjupiter mine doesn’t have the brass ring, and kept the sprocket that came on it. It’s just weird. I thinks it’s working fine it’s just so different than the regular clutch

MIGHTER THAN THE SWORD?!??? I have a feeling you played ATV off-road fury 3

I just installed a 30series Chineseism on a predator 212 on a minibke. My problem is it won't dissengage. It's installed correctly the correct belt is installed correctly as well. I'm at a loss would any of these things cure my problem?

@joshuaatkins5197

3 жыл бұрын

The bronze or brass bushing is getting snagged as the driver slides on the hub in bet

@BM205

3 жыл бұрын

@@joshuaatkins5197 that's exactly what it was. Somehow the bushing had a crack in it. Put a new one on and also there was a bur on the driven pulley

Great explanation but loose the background music, hard to concentrate 😂

Give a Juggernaut a try. I fooled with springs and weights forever and never could get it where I wanted it. Popped the Juggernaut on and it was perfect out of the box.

@mlindsay527

2 жыл бұрын

Yes it is just the driver and will work with any 30 Series setup. Just be sure to use the right number of spacer washers to get it to line up with the driven pulley. It is not more "powerful" but it prevents belt slip and downshifts faster than a Comet style, so when you let off and then get back on it, you have all your torque. It also allows the engine to rev higher.

No music next time please

Turn the radio off.

@minibikegarage1577

2 жыл бұрын

Turn your radio off

loud music, then mumbling... how about no

The fuckin music made me go nah👎

@minibikegarage1577

7 ай бұрын

Don't care asshole

I tried to watch this video. Because I could use the knowledge. But the damn background music is so loud i cant .

@minibikegarage1577

Жыл бұрын

Don't care

I'm here to watch a video on 30 series torque converters, not listen to your favorite brand of rap crap. Your video your choice. Bye

@minibikegarage1577

2 жыл бұрын

No one cares