Baja Warrior 200 Mini Bike 30 Series Torque Converter Install
How to install a 30 series torque converter on a Baja Warrior 200 Mini Bike without raising the engine!
Жүктеу.....
Пікірлер: 86
@k-sell40653 жыл бұрын
I did exactly what you did a year ago! Great video brother. I didn't want to alter my frame so I cut the back plate of the torque converter.
@CareyOnShipmate2 жыл бұрын
This definitely helped! Today my centrifugal clutch completely fell apart and I lost alot of the parts, this kit coming WITH all the bolts is great cause now I don't have to go look for bolts at the store and such, also, the chain tensioner spring fell apart too, so im glad to see I can also eliminate the need for that
@dannymanny69172 жыл бұрын
Mines on its way, looking forward to a good install. Thanks!
@fatbuddycat3 жыл бұрын
Oh dang, just catching your channel friend. I'm very much into this stuff.
@warningstarstargaze357 Жыл бұрын
I was thinking of cutting the plate but wasn’t sure if I’d ruin it but now I see it looks good too
@mjgato15329 күн бұрын
“Give it a couple good ugga duggas” keep coming back to this video just for that line 😂
@davidpayne40843 жыл бұрын
I've got the home lineup of Coleman starting to buy a few trail master these Baja's look pretty nice might have to get one now
@kurtiskoppdrums2 жыл бұрын
It helped me! U a good man!!!! Bless you mate
@prebaned6 ай бұрын
Good job. You should align the back of the backing plates. Although it looks flat, it has a 2.5 degree taper on the inside. Run a straight edge across both back sides of the backing plates of driven and driver clutch and look for light.
@matframpton86562 жыл бұрын
Excellent vid my friend. Thank you.🇺🇸
@Ghost88890REAL3 жыл бұрын
Great tips, I'm getting an exact one like that with a predator engine (420) and hopefully some performance parts like air filter and exhaust.
@thisthatgarage5073
3 жыл бұрын
Good luck!
@fatbuddycat3 жыл бұрын
Steel bolt should somewhat oxidize in the aluminum a little. I do the blue locktite just because I'm there and figure it really 100% won't hurt it. I'd be more concerned about lopping off all that plate but honestly, I've seen it done numerous times and it seems fine. You try those super 30 series yet? Dang brother! They ought to sell that thing with a small can of it! Stick city if you don't, I used a little red sticky grease (very little) and got a good result too. Nice job.
@evilphantom4572 жыл бұрын
awesome video man
@bruceschmitz19843 жыл бұрын
Another secret use the jack shaft plate it came with and add Shims on shaft to line both up about 8 machine shims
@gjohnston2816 ай бұрын
Great vide
@jkrollin51803 жыл бұрын
God bless man great tips
@thisthatgarage5073
3 жыл бұрын
Appreciate it!
@leskavage2 жыл бұрын
Like a boss!
@donsscooters2 ай бұрын
A skill saw with a regular carbide blade will but any aluminum with no problem and still cut wood like nothing happened. I learned that when i needed to cut some inch plate. A saw will cut it like butter.
@donkeyhole27822 жыл бұрын
Where do you get the rubber mat? Is it specifically for that purpose? I could not find that thicker locking ring on tractor supply. Not sure what it is called, so searching is not finding it. Any help is greatly appreciated. Very helpful demonstration. Thank you for excellent tips. Thumbs up! I like that diamond plate on the front of the frame.
@seanfirmiss42413 жыл бұрын
Finally, a video that explains how to do this job RIGHT! Did you increase the top speed with this mod? Thanks for taking the time to share. Sub = EARNED!
@thisthatgarage5073
3 жыл бұрын
Yes I did...It will run about 50mph with stock baja warrior gearing
@christopheramormino36323 ай бұрын
Fk yeah thanks this video helped me out a lot
@oruwatching2 жыл бұрын
Here I am over a year later finally installing the torque converter. Thanks for the video, I have a problem hope anybody can help. I put a converter on a Baja Warrior. If I do it the way it's done in this video my front sprocket is not in line with my rear sprocket. The chain wears the inside of the front sprocket. So I put a space on to move the front sprocket out. Now the chain works fine, but when I align the two inside belt plates I don't have enough drive shaft left to mount the hub. What am I missing? Thanks
@RoDaTruth13 жыл бұрын
Where did u get the rubber mat??
@562jamesj2 жыл бұрын
What model or brand torque converter is this I have the exact same bike and I want to order the exact same one as you
@richardbrown67622 жыл бұрын
Cutting the plate off makes sense
@floridajr2781 Жыл бұрын
Where can I find those headlights or a light bar that'll fit the bike
@oruwatching3 жыл бұрын
WOW! What camera are you using the quality is awesome! I have a Baja 200 what Bullet Line converter do I buy? Thanks for the info and the great video.
@thisthatgarage5073
3 жыл бұрын
Hero9..You will need the 30 series Tc...Thanks!
@leozug2 жыл бұрын
Will this get me any more top speed or is really just for torque? I’m about 225 and my bike seems to hit the governor before my liking.
@jeffgarver41378 ай бұрын
Where do you get the rubber mat for under the engine?
@vinsonlopez74612 жыл бұрын
How do you take the governor off
@DavidMartinez-uz2vf2 жыл бұрын
Where did you buy the foot pegs
@benitolozano10422 жыл бұрын
What does that battery pad operate
@420face3 ай бұрын
So to anyone doing these mods I just gotta say after doing them all myself. U have to cut a couple brackets off so you’re gonna want to grind those down smooth and paint the bike in those spots so you’re gonna have to take the engine loose to paint that well. Shaving down the key way is simple enough if you have the right tools but why isn’t it shaved from the factory? Once u cut the plate u can’t return it so if the clutch blows apart in less than an hour like mine did then you’re screwed and you’ll have to just buy a new one and return the broken pieces silently. So far I’m not impressed and between ordering that stupid lug nut and all the modifications I was unaware of it’s been a week of working on it when I can and now that the clutch broke it’s gonna be at least another week. It’s not ‘simple’ it’s not ‘easy’ it’s a giant PITA and the parts aren’t made well. The belt broke when the clutch flew apart in less than an hour. Not sure what else to say but good luck to all of you. I’ve been working on cars for years and I’ve never seen a kit that claims to fit be such a horrendous fit and then fails first day? Bad quality control, bad manufacturing, straight up. Sure if this guy has done a few before at least it didn’t frustrate him. I assure you the first one you do will be extremely frustrating, even to a level headed person that does similar things all the time. I’ve built several bikes with different motors, have quite a bit of experience, my father in law is an aircraft mechanic. Both of us looked at this thing as cheap Chinese crap that wasn’t made right in the first place. When the clutch blew apart we both just looked at each other and didn’t even say anything. We knew something wasn’t right with it. Should’ve just bought a new centrifugal clutch!!
@jordanwilson3272
3 ай бұрын
Help!!! Please
@GreasedUpDeafGuys11 ай бұрын
Are you running a governor still and what speed are you hitting
@spencerjohnson1499 Жыл бұрын
Do you have a link to the one you used looks rigid and I cannot find it online.
@salitovlogs5142 жыл бұрын
Where you get them lights from
@gameeverydaygamer35273 жыл бұрын
what pin are you talking about ?
@famousboi65804 ай бұрын
By chance where did you get those foot pegs ?
@anthonyrivera6573 жыл бұрын
Can anyone help me out? So I followed KZread videos working on my Baja 200 warrior mini bike. I’m not sure why my bike won’t turn on but it sounds like it wants to? I also have a torque converter. I’m building this on my own any ideas I can try?
@TetraHydroCannabinolTHC3 жыл бұрын
What kind of rubber piece is that and where do you get it? I had a blaster 2 seater kart come with that rubber under the engine and always wanted more of thoes for other bikes an karts
@davidpayne4084
3 жыл бұрын
Just a rubber mat like shop mat or mud flaps work good now if you want to go old school leather works 2 my dads pan head has leather everywhere
@thisthatgarage5073
3 жыл бұрын
Amazon..Look up anti vibration rubber motor mounts..Thin industrial rubber matt works well also!
@jordanwilson32723 ай бұрын
Hey I am trying to do this I stall onto my son's warrior. The drive shaft is different. I am not mechanically inclined..I'm more tarted then smart when it comes to this. Can someone please help. I can't fit the piece on
@kalebporter74582 жыл бұрын
Roll tide from Tuscaloosa Al!
@chasefishez46402 жыл бұрын
I bought a 63$ torque converter I hope it will be alright on my 196cc mini bike lol
@bubbarosebush1832Ай бұрын
Where is kit from
@GordoHernandez Жыл бұрын
Hey my shaft looks nothing like yours (pause) mine looks like a nut goes on there any clues on what I can do ?
@adams45332 жыл бұрын
Have you ever done one on a Massimo warrior 200, running into problems?
@jasonmurray1812
Жыл бұрын
I'm doing one today on the massimo mb 200. Jackshaft sprocket doesn't line up with rear wheel sprocket. No sure what to do bout this
@jwalkerftw3 жыл бұрын
Where did you get your lights from?
@thisthatgarage5073
3 жыл бұрын
Amazon
@connorneufeld4132 жыл бұрын
What can you do if you don't have a way to cut the back plate?
@samkaplitz9036
2 жыл бұрын
Use a hand hack saw.Slow &steady!
@RenovatedCandy2 жыл бұрын
Did this but the tire is spinning with the belt
@bruceschmitz19842 жыл бұрын
Can you do the same on BT 200 Coleman
@thisthatgarage5073
2 жыл бұрын
Not a hundred percent sure but I'm sure this method will work for many others
@durk54111 ай бұрын
Did you have to bend the jackshaft mount?
@michaelsmith6071
8 ай бұрын
No
@DJswope732 жыл бұрын
Could you still put a cover over it?
@thisthatgarage5073
2 жыл бұрын
Yes just have to do a little trimming on the bottom of cover
@ChrisEsposito3 жыл бұрын
where did you get the rubber pad ?
@thisthatgarage5073
3 жыл бұрын
Amazon just look up engine/motor anti vibration pads
@72hwood
3 жыл бұрын
@@thisthatgarage5073 got a link for the pad , also where did you get the bracket for the lights ?
@rodriguezanthony88473 жыл бұрын
will this install be the same for the Massimo mb200? i am buying 2 bikes and want them to run in sand. I want the power for the small dunes in glamis.
@thisthatgarage5073
3 жыл бұрын
Should be similar
@stevegreffe59043 жыл бұрын
Nice presentation, thanks! Cutting the backing plate like this removes one of the four mounting tabs for the torque converter cover. Does the plastic cover stay on OK with only three mounting tabs?
@thisthatgarage5073
3 жыл бұрын
Yes it stays on no problem
@ronaldscruggs26999 ай бұрын
Will this method work on a Massimo mb200s?
@joer5057
5 ай бұрын
That's basically what this is, I think. My Massimo is a Warrior and the "title" says MB200. The only caveat here is that he's using a Predator engine and the shaft is different on the stock 196. The 196 uses an external thread shaft (male), so the bolt that holds the drive sprocket on can't work. I'm in the process of installing a TC on mine, and have found some people using a long shank lug nut off of go powersports to bolt the sprocket on.
@MOAONAABE Жыл бұрын
what about the cover. how did you deal with that frame issue
@micinic13 жыл бұрын
Where did you find the tail lite?
@thisthatgarage5073
3 жыл бұрын
I believe I got it at Walmart in the automotive section
@micinic1
3 жыл бұрын
@@thisthatgarage5073 didnt see 1 yesterday...thnxs tho
@icegard5843 жыл бұрын
cool where could i find that bolt
@thisthatgarage5073
3 жыл бұрын
Tractor Supply
@icegard584
3 жыл бұрын
@@thisthatgarage5073 appreciate it
@TheHappyDIYGuy-ri8nb2 ай бұрын
Should have done a demo and a burnout to see if it really can
@RobertA-jw4pe3 жыл бұрын
Now show me the cover that protects your ankle from being eaten up
Пікірлер: 86
I did exactly what you did a year ago! Great video brother. I didn't want to alter my frame so I cut the back plate of the torque converter.
This definitely helped! Today my centrifugal clutch completely fell apart and I lost alot of the parts, this kit coming WITH all the bolts is great cause now I don't have to go look for bolts at the store and such, also, the chain tensioner spring fell apart too, so im glad to see I can also eliminate the need for that
Mines on its way, looking forward to a good install. Thanks!
Oh dang, just catching your channel friend. I'm very much into this stuff.
I was thinking of cutting the plate but wasn’t sure if I’d ruin it but now I see it looks good too
“Give it a couple good ugga duggas” keep coming back to this video just for that line 😂
I've got the home lineup of Coleman starting to buy a few trail master these Baja's look pretty nice might have to get one now
It helped me! U a good man!!!! Bless you mate
Good job. You should align the back of the backing plates. Although it looks flat, it has a 2.5 degree taper on the inside. Run a straight edge across both back sides of the backing plates of driven and driver clutch and look for light.
Excellent vid my friend. Thank you.🇺🇸
Great tips, I'm getting an exact one like that with a predator engine (420) and hopefully some performance parts like air filter and exhaust.
@thisthatgarage5073
3 жыл бұрын
Good luck!
Steel bolt should somewhat oxidize in the aluminum a little. I do the blue locktite just because I'm there and figure it really 100% won't hurt it. I'd be more concerned about lopping off all that plate but honestly, I've seen it done numerous times and it seems fine. You try those super 30 series yet? Dang brother! They ought to sell that thing with a small can of it! Stick city if you don't, I used a little red sticky grease (very little) and got a good result too. Nice job.
awesome video man
Another secret use the jack shaft plate it came with and add Shims on shaft to line both up about 8 machine shims
Great vide
God bless man great tips
@thisthatgarage5073
3 жыл бұрын
Appreciate it!
Like a boss!
A skill saw with a regular carbide blade will but any aluminum with no problem and still cut wood like nothing happened. I learned that when i needed to cut some inch plate. A saw will cut it like butter.
Where do you get the rubber mat? Is it specifically for that purpose? I could not find that thicker locking ring on tractor supply. Not sure what it is called, so searching is not finding it. Any help is greatly appreciated. Very helpful demonstration. Thank you for excellent tips. Thumbs up! I like that diamond plate on the front of the frame.
Finally, a video that explains how to do this job RIGHT! Did you increase the top speed with this mod? Thanks for taking the time to share. Sub = EARNED!
@thisthatgarage5073
3 жыл бұрын
Yes I did...It will run about 50mph with stock baja warrior gearing
Fk yeah thanks this video helped me out a lot
Here I am over a year later finally installing the torque converter. Thanks for the video, I have a problem hope anybody can help. I put a converter on a Baja Warrior. If I do it the way it's done in this video my front sprocket is not in line with my rear sprocket. The chain wears the inside of the front sprocket. So I put a space on to move the front sprocket out. Now the chain works fine, but when I align the two inside belt plates I don't have enough drive shaft left to mount the hub. What am I missing? Thanks
Where did u get the rubber mat??
What model or brand torque converter is this I have the exact same bike and I want to order the exact same one as you
Cutting the plate off makes sense
Where can I find those headlights or a light bar that'll fit the bike
WOW! What camera are you using the quality is awesome! I have a Baja 200 what Bullet Line converter do I buy? Thanks for the info and the great video.
@thisthatgarage5073
3 жыл бұрын
Hero9..You will need the 30 series Tc...Thanks!
Will this get me any more top speed or is really just for torque? I’m about 225 and my bike seems to hit the governor before my liking.
Where do you get the rubber mat for under the engine?
How do you take the governor off
Where did you buy the foot pegs
What does that battery pad operate
So to anyone doing these mods I just gotta say after doing them all myself. U have to cut a couple brackets off so you’re gonna want to grind those down smooth and paint the bike in those spots so you’re gonna have to take the engine loose to paint that well. Shaving down the key way is simple enough if you have the right tools but why isn’t it shaved from the factory? Once u cut the plate u can’t return it so if the clutch blows apart in less than an hour like mine did then you’re screwed and you’ll have to just buy a new one and return the broken pieces silently. So far I’m not impressed and between ordering that stupid lug nut and all the modifications I was unaware of it’s been a week of working on it when I can and now that the clutch broke it’s gonna be at least another week. It’s not ‘simple’ it’s not ‘easy’ it’s a giant PITA and the parts aren’t made well. The belt broke when the clutch flew apart in less than an hour. Not sure what else to say but good luck to all of you. I’ve been working on cars for years and I’ve never seen a kit that claims to fit be such a horrendous fit and then fails first day? Bad quality control, bad manufacturing, straight up. Sure if this guy has done a few before at least it didn’t frustrate him. I assure you the first one you do will be extremely frustrating, even to a level headed person that does similar things all the time. I’ve built several bikes with different motors, have quite a bit of experience, my father in law is an aircraft mechanic. Both of us looked at this thing as cheap Chinese crap that wasn’t made right in the first place. When the clutch blew apart we both just looked at each other and didn’t even say anything. We knew something wasn’t right with it. Should’ve just bought a new centrifugal clutch!!
@jordanwilson3272
3 ай бұрын
Help!!! Please
Are you running a governor still and what speed are you hitting
Do you have a link to the one you used looks rigid and I cannot find it online.
Where you get them lights from
what pin are you talking about ?
By chance where did you get those foot pegs ?
Can anyone help me out? So I followed KZread videos working on my Baja 200 warrior mini bike. I’m not sure why my bike won’t turn on but it sounds like it wants to? I also have a torque converter. I’m building this on my own any ideas I can try?
What kind of rubber piece is that and where do you get it? I had a blaster 2 seater kart come with that rubber under the engine and always wanted more of thoes for other bikes an karts
@davidpayne4084
3 жыл бұрын
Just a rubber mat like shop mat or mud flaps work good now if you want to go old school leather works 2 my dads pan head has leather everywhere
@thisthatgarage5073
3 жыл бұрын
Amazon..Look up anti vibration rubber motor mounts..Thin industrial rubber matt works well also!
Hey I am trying to do this I stall onto my son's warrior. The drive shaft is different. I am not mechanically inclined..I'm more tarted then smart when it comes to this. Can someone please help. I can't fit the piece on
Roll tide from Tuscaloosa Al!
I bought a 63$ torque converter I hope it will be alright on my 196cc mini bike lol
Where is kit from
Hey my shaft looks nothing like yours (pause) mine looks like a nut goes on there any clues on what I can do ?
Have you ever done one on a Massimo warrior 200, running into problems?
@jasonmurray1812
Жыл бұрын
I'm doing one today on the massimo mb 200. Jackshaft sprocket doesn't line up with rear wheel sprocket. No sure what to do bout this
Where did you get your lights from?
@thisthatgarage5073
3 жыл бұрын
Amazon
What can you do if you don't have a way to cut the back plate?
@samkaplitz9036
2 жыл бұрын
Use a hand hack saw.Slow &steady!
Did this but the tire is spinning with the belt
Can you do the same on BT 200 Coleman
@thisthatgarage5073
2 жыл бұрын
Not a hundred percent sure but I'm sure this method will work for many others
Did you have to bend the jackshaft mount?
@michaelsmith6071
8 ай бұрын
No
Could you still put a cover over it?
@thisthatgarage5073
2 жыл бұрын
Yes just have to do a little trimming on the bottom of cover
where did you get the rubber pad ?
@thisthatgarage5073
3 жыл бұрын
Amazon just look up engine/motor anti vibration pads
@72hwood
3 жыл бұрын
@@thisthatgarage5073 got a link for the pad , also where did you get the bracket for the lights ?
will this install be the same for the Massimo mb200? i am buying 2 bikes and want them to run in sand. I want the power for the small dunes in glamis.
@thisthatgarage5073
3 жыл бұрын
Should be similar
Nice presentation, thanks! Cutting the backing plate like this removes one of the four mounting tabs for the torque converter cover. Does the plastic cover stay on OK with only three mounting tabs?
@thisthatgarage5073
3 жыл бұрын
Yes it stays on no problem
Will this method work on a Massimo mb200s?
@joer5057
5 ай бұрын
That's basically what this is, I think. My Massimo is a Warrior and the "title" says MB200. The only caveat here is that he's using a Predator engine and the shaft is different on the stock 196. The 196 uses an external thread shaft (male), so the bolt that holds the drive sprocket on can't work. I'm in the process of installing a TC on mine, and have found some people using a long shank lug nut off of go powersports to bolt the sprocket on.
what about the cover. how did you deal with that frame issue
Where did you find the tail lite?
@thisthatgarage5073
3 жыл бұрын
I believe I got it at Walmart in the automotive section
@micinic1
3 жыл бұрын
@@thisthatgarage5073 didnt see 1 yesterday...thnxs tho
cool where could i find that bolt
@thisthatgarage5073
3 жыл бұрын
Tractor Supply
@icegard584
3 жыл бұрын
@@thisthatgarage5073 appreciate it
Should have done a demo and a burnout to see if it really can
Now show me the cover that protects your ankle from being eaten up
@thisthatgarage5073
3 жыл бұрын
I put a cover on it after the vid
New too bikelife check me out
Another covic 19 family spread 😮.