2M views CNC router CAN make $25,000 🤑 per month carving a 3D American bald eagle I CAN SHOW YOU HOW
Тәжірибелік нұсқаулар және стиль
2M views Roger Clyde Webb demonstrates a CNC router carving an American bald eagle with Carveco.
Thank you for watching
Help support my channel and become a Patron
www.patreon.com/user?u=15079773
Plans and parts listing available on my Patron pages for the, AMAX 3636, MIDI 4040, MAXI 1212, and AMAX 3636 CNC Router, Sieg X2 CNC Mill & Sieg 4 x 20 CNC Lathe + Mach 3.5 Info
My CARVECO 5% discount code is
ROGERWEBB5798
(ONLY AT THIS ADDRESS BELOW)
store-us.carveco.com/?ref=B40...
The Australian Inventors Workshop™ 2023
Sponsored By
Thunder Laser Global
My Fusion 360 20% discount
(ONLY AT THIS ADDRESS BELOW)
WARNING: This/These video/s are NOT SUITABLE FOR CHILDREN UNDER 16! Disclaimer: These videos, commentary, and or advice are intended for entertainment and inspiration for adults over 16 -year-old. Woodworking and metalworking are dangerous. Always seek professional advice and training before using any power tools or CNC machines. If you have any uncertainty before performing any DIY procedure, stop and learn a safer method. Understand, that there are years of learning and experimentation by me that are not in the videos. Do not attempt anything simply because you saw or heard it in one of my videos. You can have a safe, enjoyable, and even inspirational time in your workshop by understanding your own tools, materials, and your own skill level.
Пікірлер: 1 100
wow, it's crazy how that bird got stuck in there. glad you were able to get it out!
@Brainnnnn
3 жыл бұрын
I wonder if it survived
@geraldfrost4710
3 жыл бұрын
It's easy; you just cut away everything that doesn't look like a bird.
@davidelliott5843
3 жыл бұрын
Michaelangelo said his sculptures were always there inside the stone. All he had to do was get them out.
@CitrisBand
3 жыл бұрын
@@davidelliott5843 wow... He's a super hero! Saving all those people... Incredible.
@ThaGreatestAlexander
3 жыл бұрын
this is how they find dinosaurs
I toured the Philippines back in the 80's, and they produced many beautiful hand-carved creations...I purchased several pieces.
Pleasure to watch, reminds me of my dads workshop and as a boy annoying him while he was making things
I dunno how I ended up here but I could watch a CNC router all day.
Brill Fella' Just Brill!. I will be looking for one of those eagles to make a mould for my Aluminum Casting.
Absolutely gorgeous and an enjoyable tutorial! ❤️❤️❤️
I have to say. It never get boring watching a CNC run. I love the setup you have.
I don't know how I got here but I am happy to be here. I've always imagined that when someone reaches a certain age they shouldn't stop producing, instead of this, keeping a certain kind of activity is the way to stay alive. Most people who get retired just eat, drink and sleep. some traveling and visitings and is waiting for the dying day to come. You are an example to follow. I respect you and I would like to be just like you when I get retired. We need many people like you to enrich our lives and teach us that life goes on, even when the system takes us out of the scene. Thank you so much for your life example. And as if that weren't enough, the final song of the video is my favorite from the youtube library "Must be something" 25:24. God bless you 👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼 Sorry for my english☹
Thank you, Roger! Great video.
I wish we were neighbors/friends since I could learn a tremendous amount from you on many different topics. Will have to settle for the videos that are quite nice.
Thank you for the real-time earnings data, very cool to get a real glimpse into the revenue.
That is wonderful. A beautiful job,thank you for showing .
@rogerwebb9600
5 жыл бұрын
Thank you, for watching, Please visit my Patreon page, subscribe and forward the video on to a friend. Roger Webb ;-)
You, sir, shot this video on my birthday! Thank you!!
My dad is 53 and just got his first computer last year, congrats on keeping with the times you're really doing alot better than 99% of people your age do
@rogerwebb9600
3 жыл бұрын
Thank you for that ;-))
@protonx80
3 жыл бұрын
@NPC #34254334 Response: im approaching 51 and i started with ZX Spectrum .....
@dangerous8333
3 жыл бұрын
That's actually really odd since your dad isn't even old in terms of computers. I mean, he's Gen X. So that's really strange. He was 35 when Windows XP and GTA 4 was out to give you some perspective. Perhaps it was just a personal choice and not age related? I suspect it's the latter.
Love the precision instruction, “ Tighten it firm. Quite firm.”
Brilliant. This is beautiful. Well done.
I always wanted to get into this sort of hobby and make it a business alongside a few other things. Loved to do carpentry work by hand and by machine.
Great video! A little tip on setting tool offsets... never measure from the top of your work, always measure from the table or fixture using a standard height block. It can be any height, as long as long as you know what it is. Then measure the delta between your tool reference and your workpiece reference. This way if you machine off the top of your workpiece and you need to change/replace a tool mid-cut you still have your datum.
@rogerwebb9600
3 жыл бұрын
Great tip!
from 14.36 epic sound atmosphere
Much respect old timer. Starting my own CNC business in Kentucky. I come here to learn. Groovy music. Mesmerizing footage. All the possibilities wake me up when I should be asleep. Can’t wait to have a functioning shop soon. It’s my goal to be my own boss, and make things that make people smile. I’m interested namely in coats of arms, folk art, making forms to cast recycled aluminum pop cans. Your channel inspires me and other artists, creators, and techies. High five across the pond, cousin.
@rogerwebb9600
3 жыл бұрын
Awesome! Thank you!
Nice work and sweet router. You could vacuum-infuse the wood with epoxy resin prior to milling. That way it's a lot harder and less fuzzy while milling and it yields to a more robust part
For your clean up after cutting, use a low pressure sand blaster. Don't use sand though, use baking soda. 15 minutes later your done!
@larocdokarnap3227
2 жыл бұрын
How about using sawdust? I'd imagine its best using the same material you are processing.
Yes I used to program 5-axis NC machines back in the day with A.P.T. software.
I would add reminder for people to know the Maximum rpm speed for the bit they are using, to buy only quality bits. as a bigger bit at too high of speed might explode apart. Very nice video thanks
@rogerwebb9600
3 жыл бұрын
Great tip!
LINDO TRABALHO ROGER, PARABENS!
i got so much better at cnc wood carving once i realized the importance of calculating the spindle rpm for the feed rate and the specifications of the bit. The bit doesn't even get too hot to touch when it's making chips properly; You just have to get more comfortable putting some lateral force on it instead of thinking the cnc machine is supposed to be moving with no resistance
Super! Thank for the video.
Great for you my friend! Stay happy healthy and fluid
The Kerbal space program music makes watching the machine great
Ceder is such a nice quality though because is an aromatic, and a clear coat has lots of luster. I have always wanted a CDC machine and may get one. Thank You.
Lovely sir its a wonderful Piece of History of America so love the work well done .
that was beautiful, thank you for teaching during the video.
@rogerwebb9600
3 жыл бұрын
You are so welcome
I’ve been watching Mr. Webb for years, he’s like the bob ross of wood working
@nettyvoyager6336
3 жыл бұрын
another wall flower :P
He is just the cutest, Can i adopt him?
This dude is rock and roll :)
Roger, yes cedar is also very hard on your tools even carbide. I noticed even with oak the same effects. Pine seems to cut the best for me. I agree with you on the 2.2kw spindle. I upgraded from the 1.5KW. Only thing is I have to share the 220volt dryer plug with the old lady. Or get one installed in the garage. Good work I always enjoy watching your videos and watching you progress over the years.
That's cool IDK why I am here but that's Amazing
Looks so good that when I saw the thumbnail I had a moment of "What the hell are they doing to that bird?!"
@Kreege
3 жыл бұрын
same
Awesome work buddy. Great process coming together to make great things. Love it.
@rogerwebb9600
3 жыл бұрын
Thanks 👍
That was just awesome! Thanks for sharing your work.
@rogerwebb9600
3 жыл бұрын
Glad you enjoyed it!
Nice. I love the carve done by machine. My dad is a professional wood carver but he does only by hand.
@brandielee7971
3 жыл бұрын
Thats becoming a lost talent, thats awesome for him 😊
Hello! Thank for the video. The best way to cut cedar l cut in 45 degrees. Because l cut the wood in in not grain.
24:43 to 24:45, night and DAY difference. Looks BEAUTIFUL stained/shellaqed/varnished, whatever it is you did. WOW!!
Beautiful carving , great tips on CNC usage, thanks 👍
@rogerwebb9600
3 жыл бұрын
Thanks for watching!
There are rotating steel, brass or palstic brushes available for the Dremel. I think those might speed up the process of cleaning in case it's only burrs that are left?
@user-lj4xq4hm3k
3 жыл бұрын
Forget the Dremel, just chuck the brush into the router and run it over the whole surface. Let the machine do the work.
@S31Syntax
3 жыл бұрын
@@user-lj4xq4hm3k Ehh, with touch up work like that I'd rather the feedback from a hand tool so I can see when would be best to back off.
@TheDayzman
3 жыл бұрын
@@S31Syntax If you know what the cutter is doing you know where you need to program it. On that eagle it would take longer than 2 hours but if we are talking about selling wood carvings it would be well worth it.
I grant you the best taste in music award. Soo soothing
@jessemacey2373
3 жыл бұрын
Ello
@Audioslav3driver
3 жыл бұрын
Sound track from kerbal space program!
@Nicodemus1971
3 жыл бұрын
It’s the same soundtrack as Kerbal Space Program
Great watch, reminds me of working in the woodshop with my dad.
@leonhelg
3 жыл бұрын
@Ste_ Best thanks for saying that, we are generally too bad at being thankful for what we have.
Great vid, I used to love carving with just a hand held dremel back in the day,used to have pine trees which was great for carving snakes ect, very addictive and time consuming but love working with wood.
@rogerwebb9600
3 жыл бұрын
Thanks 👍
You can also take off the furring with a blowtorch, and it can add to the piece if you’re careful.
Kerbal Space Program in the background...NICE!!!!
@anibalamaya
3 жыл бұрын
a man of culture
@kilodk77
3 жыл бұрын
I don't see it?! :o
I enjoyed yer tutitorial ways, Lord Bless.
Thanks for your great video. I learn a lot of basic from this.it is very helpful.
imagine actually having some talent like this guy? would be nice
You should be able to write a simply G code program in Mdi instead of having to turn your handle tell it S1000 M3 and then G91 Y12.00 F5.0 and you can feed incremental without having to write a full program. Awesome 👏 work i like your channel ive been a cnc programmer for 25+ yrs and am fixing to buy a router for some side projects 👍🏻
Thanks for the video
Gracias Roger!
went from i need help to making 12k a month :D nice! and congrats
@tonydavis1607
3 жыл бұрын
I thought the same... making 12k a month, during retirement, and you need help?
@flippy9133
3 жыл бұрын
@@tonydavis1607 when he made the video he wasnt making that, read the description :)
No idea how I found this but it’s so interesting and I’m happy I did. Not looking at buying a machine but I love this video
@rogerwebb9600
3 жыл бұрын
Glad you enjoyed it!
I LOVE CNC WORKS
A real pleasure watching sir quite inspirational.
I love that machine but I would never use any kind of cedar with it never get a smooth look to it unless your going for rustic look
Amazing! New Subscriber. :)
Thanks so much for helpful video, hopefully am keep watching more I need to learn it's interesting thanks
Nice video Roger. I was pulled in to watch the whole thing when I saw the Storm Trooper waving the Aussie flag! Love it
When I am financially able, I will be helping out. Watching things like this really makes me happy.
Did anybody else catch the Kerbal space program sound track in this? Hahahah
@roamingthereal4060
3 жыл бұрын
I was like.. man this is some good music for a woodworking video.
@George-lc9fq
3 жыл бұрын
i always hear ksp music everywhere that isnt in ksp
@RandyRandersonthefamous
3 жыл бұрын
I don't I need to hear it more
@franckr6145
3 жыл бұрын
@@George-lc9fq cause KSP use DMCA free music :)
@coolguy8221
3 жыл бұрын
Yeah KSP uses stock music I believe lol
this is the very first time I've even seen a CNC machine working and found it totally amazing thank you very much aim enthralled now
@rogerwebb9600
2 жыл бұрын
You are very welcome
This was a lovely video to watch. Thank you for the upload
@rogerwebb9600
3 жыл бұрын
Glad you enjoyed it
Looks great I would just like to know the run time and total time it takes to produce this part.
Hi Roger, I've found with some woods, to avoid furry bits you do the clearance along the grain and then the finish across the grain. Also a straight ball nose rather than a tapered ball nose does slightly better as it gets down into the cusps better. Also, you can do an offset tool path, it takes longer but there is less post cleaning up. What wood do you find mills the best with no fuzzies?
@Cigarsnguitars
2 жыл бұрын
Your moniker reminds me of my grandkids. Your grandkids are just a beautiful day with your CNC. You’ve done some fantastic work with it.
@JohnSmith-pn2vl
9 ай бұрын
thats an interesting tip, gonna try it out
This was really fun to watch, thank you!
@rogerwebb9600
3 жыл бұрын
You are so welcome!
Old men always make technology sound so hard.
@3OHT.
3 жыл бұрын
Not just the old men, but the old women, and old children too.
Those remaining outer edges are a little time consuming to reduce down, prior to swapping out the cutter again for the fine cutter. Why not enter instructions at the very beginning with the 12.7mm cutter installed that removes 6-8mm from the left and right side and then continues to rough cut the object (in this case it is an Eagle). Reducing those outer edges first would save you an awful lot of time and also a whole cutter change. not to mention the wear and tear of that cutter. Just a thought. God bless.
Nice job done Roger. You remind me of an old friend of mine who has since pass away. I watched several of your videos and enjoy them always. A brother N law of mine use to do refinery work, with various aluminum, brass ect... he was very good at it and some times they had things like the eagle to pour in metals, and they would on occasion use a sand blaster to remove the roughness, I use sand blasters for engraving and if you use filtered silicone sand it is like high grit sand paper, lets say 1000 grit plus and it is easy to sand with, might be an option in your future and it gets into all the small areas for ultimate sanding.
@rogerwebb9600
2 жыл бұрын
Thanks barry, I will look into that.
That's one fascinating thing. I just wished I had such a device at home to play with it... 😅
Beautiful work Roger! I love the manual labor involved as well. The only thing I'm totally amazed by, is that people actually want to buy this eagle. For me the art and the beauty of it is in working with machines, I never understood that people want to buy products, I only understand making things.
@bobbob-vt3bw
3 жыл бұрын
Not everyone has the skills to make everything although one could fell there own tree and carve a table out of it many people will say that it is worthwhile investment to buy the table or egal in this case instead of acquiring the skills instead investing Thier time into other ventures
I thought you were drilling through a dead owl in the thumbnail! 😂😂😂
Amazing and really educational video. Also it's amazing that you still actively read comments. Great job!
@rogerwebb9600
3 жыл бұрын
I try
You are a master of your trade!well done
How long did the milling take ?
its like a 3d printer in reverse
@annenonneemouse2498
3 жыл бұрын
I just said exactly the same thing
@BBuford
3 жыл бұрын
Subtractive manufacturing vs additive manufacturing. Accomplishing the same goal (sometimes) through different means.
@MediaInfoPolska
3 жыл бұрын
Its CNC technology know from very long time before 3d print
Very nice job enjoyed watching you video
Тнanks for work! You are really good!
came in to see some woodcarving, came out with a PhD balg eagle CNC..
@runk8583
3 жыл бұрын
bald*
@TheNajSD
3 жыл бұрын
@@runk8583 Oh it's definitely balg. The eagle clearly isn't bald.
@imtruegeordiesballscratche9261
3 жыл бұрын
@@TheNajSD think it’s a toupee
Standard copy paper is about 0.004" thick, usually 0.003" or 0.002" by the time it catches under the tool.
@patrickfetters6373
3 жыл бұрын
was just thinking the same thing
Your videos are amazing and inspiring. I hope you keep doing this.
@rogerwebb9600
3 жыл бұрын
Thank you, I will
Very nice work with presentation.
Hearing an older gentleman say the phrase "G-Code" in a casual way completely unrelated to the common modern inner city vernacular referring to a gang members code of personal conduct, is rather interesting to acknowledge, if nothing else. Funny when you think about it.
@poorboys14
3 жыл бұрын
I had the exact same thought
18:33 ksp theme :D
@cloakingoak8306
3 жыл бұрын
I know right!?
super good, super clear, learned a ton. thank you
@rogerwebb9600
3 жыл бұрын
You're very welcome!
Beautiful work. Thank you for sharing.
@rogerwebb9600
3 жыл бұрын
Thank you very much!
WOW amazing! Can you do one of those wood balancing eagles that you balance on the tip of the beak??
@mubashirahmad9694
3 жыл бұрын
not possible with wood carving bcz those designs are hollow inside. And they have metal weights present inside the wings inorder to bring the center of gravity at the beak.
somebody plays kerbal space program, nice music!
love it. Thx
im always happy to hear ksp music
I wish you were in the USA. I would love to hire you to make me a Resolute desk
@dbyrum8772
3 жыл бұрын
Ive been programming over 25yrs I would be happy to quote you a Resolute desk if you your interested.
Could you replace the bits with metal cutters and make a brass eagle? Before they had computers I used to use a tape drive milling machine and carved out different things with aluminum. I was trained back then by a teacher that machined parts for the first space shuttle. He helped make the doors on the space shuttle and normal tolerances for machining are plus or minus 5 thousandths, but for the space shuttle the tolerances were plus or minus one thousandth.
@hetlerz4sken
3 жыл бұрын
that is more likely work for the bigger industrial cnc mills like a vf-2 or something from what i see these garage cnc machines only ever cut wood
@elonquemattheson6151
3 жыл бұрын
It depends how rigid this router is and what the spindle horsepower is. Routers are normally reserved for wood and plastic, while CNC mills are used for metals (and plastics). This particular machine might be able to handle brass though, it's not a very tough material to cut.
@cjgreenwood
3 жыл бұрын
I'm assuming you're talking inches. 1 thousandth of an inch is 25 micron. I work on a crankshaft manufacturing line, and we run to a bearing diameter tolerance of +/- 8 micron.
Your shop, and your skill is a well orchestrated merger between Old School and Computers. Love it !
A flap/brush wheel for a drill is a major time saver. It will clean up your carving is under 5 minutes and get into all the details. They work best at a low rpm. Its called sand-o-flex
Roger, this is really cool. What machine do you recomend? Do you use several different brands?