Nice video, especially the NIN in the background!

@NationalSpeedInc

2 жыл бұрын

Good ears! Hard to find backtracks come in handy, ha.

Favorite car, favorite band. Only wish you guys were in Australia!

Mustang GT plus Nine Inch Nails Music is a bonus.

It’s amazing how these relatively simple mods can boost power output by so much. I’m surprised a cat-back exhaust system wasn’t included in Stage 2. Maybe in Stage 3.

@rileyneufeld7001

Жыл бұрын

Rarely is the cat back going to be the greatest point of restriction. Maybe a 5hp gain if that.

Wow, I really wish this company was also in Northern California

Can we see how cams would look on this car. Amazing results so far!🔥

@travisball566

Ай бұрын

I installed cams also jlt is known in the community for not being very good why the dyno had to be done with the hood open

Please understand I am speaking out of ignorance. I happened to notice the long tube headers were installed as they were without any heat protection. Would it not help to contain the exhaust heat before it escapes out the back?

Will adding the headers cause any codes (P0420/P0430) or lights (wrench light) to show up?

I did all of this except the thermostat on my 2022 GT and I am 10 HP below, so I am guessing around 477 WHP on mine, we had it on the Dyno, but it was 94% humidity that day and the Dyno is outside. It ran right at 476 WHP on the Dyno. Hubby drives the GT500, so I am getting my car to where I can keep up with him! 🤣Great video!

@djk856

11 ай бұрын

How much did the intake , headers and tune cost for parts and labor?

@cajunqueen1971

11 ай бұрын

@@djk856 Right at $9K, the headers are the most expensive, and labor. Now the poor car just sits in the garage.

@djk856

11 ай бұрын

@@cajunqueen1971 oh damn. I just got quoted 4900$ for kooks w high flow cats, intake and dyno tune. I thought it sounded a little high but maybe not

@cajunqueen1971

11 ай бұрын

@@djk856 That is not bad at all! We had a lot of suspension work done, also. We did adjustable camber and caster plates; kelltrac posi locks; and one more thing but I forgot! I bought a Bronco, so the car has just been sitting in the garage since June, we sold the GT500. We are switching to off road, but I just cant sell the GT yet, that 9k we would lose, so it will stay for another year.

@Shiftnlift

11 ай бұрын

9k is crazy I didn't even spend half that lol same mods

I would love to have seen what it would have picked up with an X-pipe I know those stock resonators are a restriction.

Did you use 3/8" or 7/8" tube headers?

Very happy dyno. Super plucky correction factor. Lol

NIN

I can’t believe that a thermostat made 5hp for such a small nothing item that’s crazy but bloody good jump in power for that item.

Hi would it make a difference if you add a throttlebody 85mm BTB ?

I am wanting to run headers but not add a lot of volume to the exhaust as I actually like the stock exhaust sound. Do these headers with cats make a big difference in how loud the exhaust is? Thanks!

Hello question will this Formula work on a 2012 Boss 302

👍👍

So How much horsepower are you pushing after stage 2?

No stage 3 video?

✅

How much is the stage 2 cost?

If you plan on doing headers, even if they're catted, expect a "wrench light" and P0420/P0430 codes. The higher flow will cause these codes, and no, your tuner will NOT turn it off. Its illegal to do so. Putting spark plug non foulers on the rear O2 sensors may help. In theory, they move the O2 sensors out of the stream enough to fool them into thinking theres a normal amount of flow.

@nipbakka

Жыл бұрын

Hey bro shut up with all the rubbish no one wants to here your bloody negative comments these guys are doing a great job of letting us people know what up grades do if you can’t show proof then shut up

@nozopoke1782

9 ай бұрын

That’s only in the USA. Tuners can turn them off anywhere else in the world

I dynoed at 483 with just catless headers, full exhaust (fully straight pipe), flex tune, and just a drop in K&N filter (stock air intake). I might have to give an aftermarket intake a go to see if I can break that 500 whp.

@miles__9369

10 ай бұрын

Did you change the intake and see a difference?

@jeyfs7355

10 ай бұрын

@@miles__9369 No don’t think it’s worth it, my tuner told me not to do it as open intakes suck in more hot air. I’m boosted already though with hellhorse twin turbos.

@miles__9369

10 ай бұрын

@@jeyfs7355 Oh okay thanks for the response that makes sense. Nice sounds like your enjoying your build.

@jeyfs7355

10 ай бұрын

@@miles__9369 Somewhat, I live in California so I have her stored in my garage. I dynoed it and it’s at 1043 whp now.

Now wait just a minute. This is 100000% ripped footage from the last video I just watch lmao.

Playing music while talking VERY ORIGINAL.... Not wasting my time trying to hear this...

I'd like to know what this looks like without the long tubes, maybe just a resonator delete for a more daily driver situation. Don't get me wrong I love the long tubes, but probably not going to do it. Interested in burning some e85 though.

@MustangJunky

10 ай бұрын

Long tubes are definitely worth it if u want to squeeze out an extra 35-40 horsepower, my favorite part is about them is how they change the cars driving feeling, u get a lot more low end torque, the only issue is for the price you could also get other stuff that would arguably be better whether it’s cosmetic, interior, but as far as performance after a CAI and e85 and muffler delete it’s all you can really do while staying N/A excluding cams and fuel injectors

What do I have to do to run flex fuel? And my tune is with SCT BAMA. Thank you

@HummelHamster

Жыл бұрын

Steeda has a chart made that shows what all you need to do based on your car’s year and the mods that you have done to it.

Solid gains and rational packages but curious why you folks don't remove the resonator and add different mufflers. Got to imagine there's easily another 10-15 RWHP lost there, plus a better tone.

@TheGevShow

Жыл бұрын

i think theyre showing what theyre package will do. any other mods you do are a bonus. i dont think this is a "lets see how much power we can make" video. its more of a "heres a really good ad for our package and here are the numbers to back it up" video

@gerrym75

Жыл бұрын

I'd be happy with this package on my 21. Solid gains and not crazy loud. Most videos I hear with muffler deletes sound way too raspy and would give you the shits after a few months

Great video. New subscriber to your channel. Wondering if you guy's ever mess around on the 2015 Mustang Gt platform with a 2018 ported Intake manifold and JLT cold air and free flowing MBRP cat back exhaust and a custom tune?

@NationalSpeedInc

2 жыл бұрын

Thanks for the sub! We do! There are gains to be had with the gen 3 intake for sure.

Does the thermostat require a tune

If it had catless headers it would of broke that 500whp mark

NIN...+20hp

Is this real? I got a 2019 gtcs

@NationalSpeedInc

2 жыл бұрын

Yes, very real! We'd love to work on your California Special!

Certainly the manual transmission car will make plenty more hp than the automatic transmission car! Y’all should do a comparison

@romanjacobs1794

9 ай бұрын

Because of light flywheel or why?

@nozopoke1782

8 ай бұрын

@@romanjacobs1794manuals have less power loss through the transmission

@romanjacobs1794

8 ай бұрын

@@nozopoke1782 fair enough 👌 Although that Mustang's 10sp always gonna be faster on the road

Cold Air intakes don't do much for you. 5HP tops. The HP boost you get from "tune required" intakes is mostly from the tune. A simple 93 octane tune can get you as much as 20HP. Its all marketing fluff, that I fell for too many times. Open air element CAIs just get heat soak unless you're on a track, at the strip, massive heat soak. Save your money for a better intake manifold, OPG's, cams, etc, or boost. Dynos can vary as much as 5+ HP per run, and if the car isn't at operating temp for ALL runs, the numbers are bogus. Cold oil causes parasitic loss.

@xlaostha704x

Жыл бұрын

Yea, this is the reason why I went with just an aftermarket intake filter. I went with a Green filter.

@Shiftnlift

11 ай бұрын

You say that yet gt350 and 500 comes with open element intakes.

Hard to believe a cold air nets 20WHP. Ford Engineers must be asleep....

JLT not j and L lol

@stevensink5544

Жыл бұрын

Hi there my Oil Separator is J&L not JLT on my Gen 3 Coyote they are two different companies!

@traekiser213

Жыл бұрын

@@stevensink5544 I stand corrected and apologize