I loved how you got to the point and didn’t drag on. My favorite how to video yet. And it worked.

@PYR-Auto

19 күн бұрын

Glad it helped

Great video!! I hate how people drag out videos much longer than necessary. I had the fob for my 2016 Yukon XL Denali reprogrammed within 2.5 minutes. And it saved me the $225 my dealer wanted to charge me. Amazing! Thank you!!

@PYR-Auto

Жыл бұрын

You're Welcome! Glad it helped

I'm at the dealership now. They quoted me 175 for programming a key. For less than 5mins of labor? I came straight here and found what I'm looking for. Thank you for the information. It is definitely an escape room tactic I wouldn't have figured out.

@PYR-Auto

Жыл бұрын

You're Welcome!

Thank you! Thank you! You saved me $275 from the "full salon" dealer treatment of $500 plus tax. Really appreciate it.

@PYR-Auto

7 ай бұрын

You're Welcome! Glad it helped

Great simple to the point clear video! I just got my new fob and within 3 minutes or less it was done. I forgot to hold the start button for a 12 count and the new-or old fob wouldn’t start the vehicle. I then did the 12 count and all is well. Thanks again!

@PYR-Auto

3 жыл бұрын

Thanks! glad it helped

Awesome video it worked. Dealer told me i had to pay an additional $180 to have it programmed and i couldnt do it with out a scanner. However this video worked perfect. Thank you!

@PYR-Auto

2 жыл бұрын

You're Welcome!

My go to video. Third time using it. Thanks... again.

@PYR-Auto

3 ай бұрын

You're Welcome! Glad it keeps helping out

Thanks, worked the 1st time after following your instructions. Saved me $65 I would have had to pay the Local Locksmith.

@PYR-Auto

3 жыл бұрын

Glad it helped!

Thank you so much for this video. I just programmed my new key fob to my 2015 Yukon Denali and it works perfectly.

@PYR-Auto

2 жыл бұрын

You're welcome! Glad it helped

I had a key cut on my worn out key, ordered two new fobs on eBay and used these simple instructions to program them both. My only issue is it seemed like it wasn't detecting the original or the second programmed key. I only had to hold down the button for more than 12 seconds to exit programming mode (a couple times) and they both work (all three counting the original)! Saved me hundreds. Thanks!

@PYR-Auto

Жыл бұрын

You're Welcome! Glad it helped

Thanks. Worked like a charm. The only difference for my 2015 Denali was that the info screen was still totally black and blank so I initially thought it wasn't working, but I continued on with the process and it worked. Thanks

@PYR-Auto

2 жыл бұрын

You're Welcome! Yeah, some vehicle only show the messages for a few seconds right when the door is opened

I went back and FOllOWED the time and start ignition presses. It worked. Follow his easy direction and you’ll understand he’s the best

@PYR-Auto

2 жыл бұрын

Glad it helped!

Awesome instructional video. Service tech could not get the fob programmed. Had to try twice. Had to leave the key in the door after the 5 turns. Saved a 150 $ service call to the dealer. Thank you

@PYR-Auto

Жыл бұрын

Glad it helped!

Loved your video! Thank you. I was able to program my new control all on my own with your video.

@PYR-Auto

2 жыл бұрын

Great! You're Welcome!

Very helpful and informative. Saved me hundreds on a new fob.

@PYR-Auto

Жыл бұрын

Nice!

U saved me alot money with your vid!! Outstanding vid! Straight to the point!!🙏

@PYR-Auto

2 жыл бұрын

Thanks!

Yes, worked perfectly. Thank you so much for sharing this.

@PYR-Auto

2 жыл бұрын

You're welcome! Glad it helped

Thanks! Great video and it worked perfectly. I didn't even know I could program up to 8 remotes. Thanks so much!

@PYR-Auto

3 жыл бұрын

You're Welcome! Glad it helped

@officialteamun-wreckable9886

2 жыл бұрын

@@PYR-Auto Do the 2015 Yukon slt have a chip?

@officialteamun-wreckable9886

2 жыл бұрын

@@PYR-Auto On the remote??

Wow worked like a charm. Thank you so much. You just saved me time and money. Thank you!!!!!

@PYR-Auto

2 жыл бұрын

You're welcome!

I just did this today and it worked like a charm the very 1st time. Thank you so MUCH.!!

@PYR-Auto

4 ай бұрын

You're Welcome!

I was having an issue getting the programming screen to show up. After several failed attempts, I finally got it to work by starting the vehicle and shutting it off again.. then following the steps in this video.

@PYR-Auto

3 жыл бұрын

cool - glad you got it figured out

@scottwatson3782

9 ай бұрын

I Never got the program screen to show up. 2017 Yukon

@eduardoandrade9092

3 ай бұрын

I'm having the same problem on my 2015 yukon

OMGoodness! Just saved me hundreds of dollars!! Thank you so much!!🤛

@PYR-Auto

2 жыл бұрын

You're welcome!!

Excellent Video, Thank you sir!

@PYR-Auto

2 жыл бұрын

You're Welcome!

Worked great for my 2015 Yukon XL

@PYR-Auto

Жыл бұрын

Nice!

I'm not getting the ready for program key screen in my dash at all. 2015 Yukon xl Denali. Found a.comment below saying to turn the car on the off and that worked. Awesome vid!

Worked great! Thank you!

@PYR-Auto

2 жыл бұрын

You’re Welcome! Glad it helped

Very useful information. Thank you very much.

@PYR-Auto

Жыл бұрын

You're Welcome!

I wish you this message would carry the same weight as me tellin you this in person, Thank You! I highly appreciate this video and would definitely share with anyone I ever knew to come into this type situation🤝 Thank you! God Bless 🙏🏽

@PYR-Auto

Жыл бұрын

You're Welcome! Glad it helped

Great job on this video!

@PYR-Auto

11 ай бұрын

Thanks!

Thx u it worked and saved me from paying $130 at the dealer.

@PYR-Auto

2 жыл бұрын

Great!

Thanks for the video. You save me more than $100.00 by follow your steps. 👍

@PYR-Auto

3 жыл бұрын

You're Welcome! glad it helped

thank you for your video

@PYR-Auto

3 жыл бұрын

You’re Welcome!

excellent took me 60 seconds to program my 2015 denali....thx ...just need to get a key cut at locksmith...

@PYR-Auto

Жыл бұрын

Glad it helped

Took a couple times but it worked great.

Thanks for this video that really helps because I try to get a new one from the dealership and they told me I have to pay 200 for the remote and 175 for programming

@PYR-Auto

2 жыл бұрын

You're Welcome!

Thanks brother worked great!

@PYR-Auto

Ай бұрын

You're welcome! Glad it helped

Thank you so much!!

@PYR-Auto

2 жыл бұрын

You're welcome!

Thank you!

@PYR-Auto

2 жыл бұрын

You're Welcome!

It really works thanks

@PYR-Auto

9 ай бұрын

You're Welcome!

Works!

Thank you

@PYR-Auto

2 жыл бұрын

You're welcome!

Thank you!!!!

@PYR-Auto

Жыл бұрын

You're Welcome!

Awsome thank u you save me some money

@PYR-Auto

Жыл бұрын

You're Welcome!

Thanks bro

@PYR-Auto

3 жыл бұрын

You're Welcome!

Thx so much bro I was about to pay 160 to program it

@PYR-Auto

3 жыл бұрын

You're Welcome!

Bro your awesome, made this so easy and the dealer would of charged an arm and a leg

@PYR-Auto

6 ай бұрын

Glad it helped!

2 questions: 1- Will that work on non OEM remotes that look the same but purchase from Amazon? 2- does that program all features like the remote start and the power folding mirrors?

Very clear instructions. Where is a good place to get a new replacement GMC Fob for 2015 Yukon?

@PYR-Auto

3 жыл бұрын

Thanks - I would recommend bit.ly/CarAndTruckRemotes.

Awesome video where did u get that new key fob. Thank you

@PYR-Auto

Жыл бұрын

check out bit.ly/CarAndTruckRemotes

Nice

@PYR-Auto

Жыл бұрын

Thanks!

Worked perfectly for me. It didn't show the Ready for remote screen until after I pressed the stop start button the first time. But then I noticed I was programming remote #4. I bought this vehicle used is there a way to remove previous remotes from the vehicles programming?

@PYR-Auto

Жыл бұрын

The proceudre below will erase all previous remotes and the order in which you program them back in will determine the remote #. You will need to start he proceudre with all the working keys far enough away from the vehicle so they cannot be read kzread.info/dash/bejne/a4ys1bOfn67FoLg.html

Great video. Thank you. Ps...increase the dialog volume if you can. Otherwise, very informative.

@PYR-Auto

2 жыл бұрын

Thanks! Noted

Thanks for the great video. I have two vehicles, one Yukon and one Tahoe. I want to make replacement keys. But I don't have the physical key for the Tahoe? I have the fob, just not the metal key. Is there a workaround?

@PYR-Auto

Ай бұрын

Unfortunately not

@ParkerHarrington

Ай бұрын

​@@PYR-Autook thanks the reply. I try and avoid going to dealer at all costs but only $25 to cut the key from the VIN isn't bad I guess.

Do I have to get the new key cut if I already have a working one? Or can I just link it and use it?

@PYR-Auto

3 жыл бұрын

You don have to cut the new emergency key from your new remote in order for the programming to work. You can just use the the emergency key from you existing remote and to get it into programming mode.

Where is best place to buy a replacement key fob for 2015 Yukon Denali?

@PYR-Auto

2 жыл бұрын

check out bit.ly/CarAndTruckRemotes

Which key fob would you recommend?? We have a 2016 gmc denali xl

@PYR-Auto

3 жыл бұрын

I would recommend checking out bit.ly/CarAndTruckRemotes

Not sure what I'm doing wrong. I followed the steps but remote is not registering. In the last step 12 second hold on start button is it suppose to confirm the addition? Or when I press the start button one time before clicking on remote being added is it suppose to display something? Thanks in advance!

@PYR-Auto

3 жыл бұрын

The new remote should be programmed after the stop start button is pressed - the display should read "ready for remote 3" or 4,5,6 etc. However some vehicles only seem to show that message for a few moments right when the door is opened or closed.

Is there a way to program a 2016 Sierra Denali key fob? It uses a separate key and fob. Thanks

@PYR-Auto

3 жыл бұрын

Unfortunately there is no manual programming procedure for the non-push button start ignition vehicles

2016 GMC Sierra does NOT have a transmitter pocket nor a push start button. Any suggestions for programming a extra key pod?

@PYR-Auto

7 ай бұрын

There is no manual way to program fobs for the non push-button start vehicles - you will need an automotive locksmith or dealership

I dont have a push start button so how would i program a new extra fob? 2015 GMC Sierra 1500

@PYR-Auto

Жыл бұрын

unfortunately there is no manual way to program the fobs for the non push button start vehicles

What would be the process for a 2015 Sierra 1500 , I lost the remote but have one key.

@PYR-Auto

2 жыл бұрын

Unfortunately there is no manual way to program the fob if you do not have a push button start ignition - you will need an automotive locksmith or dealership

This should work with 2016 GMC Sierra - only on board programming, not programming tool is needed?

@PYR-Auto

Жыл бұрын

no - unfortuneatly there is no manual way program the fobs for a 2016 Sierra

@jamescc2010

Жыл бұрын

@@PYR-Auto How about 2016 GMC Denali add new smart remote ? I will try and find out today provided my customer remotes are good.

Where is the best place to purchase a new key fob for 2015 Yukon Denali XL

@PYR-Auto

4 ай бұрын

check out bit.ly/CarAndTruckRemotes

After I add the new key will the old one still work

@PYR-Auto

2 жыл бұрын

Yes

What if you lost the key fob and don’t have a fob that already works?

Where did you buy the key I some on Amazon but the reviews aren't that good

@PYR-Auto

2 жыл бұрын

check out bit.ly/CarAndTruckRemotes... wherever you get if from, I would recommend getting an OEM one

After I did the 5 key turns, my dash said something along the lines of remote activation Standby or something along those lines. Like it wasn’t fully ready?

@PYR-Auto

3 жыл бұрын

I've done this on many different Yukons and have never experienced that

@justinbooth8421

2 жыл бұрын

@@PYR-Auto question my wife's key fob got stolen..any way to delete that one from car? Have new fob and goin to program that one

I have a 2015 GMC Yukon with a key start not a push bottom. Is there a way to program the FOB without a programmer.

@PYR-Auto

Жыл бұрын

unfortunately not

what if you lost your only key? is there a way to program one without an existing remote?

@PYR-Auto

Жыл бұрын

Yes - you can find that video here kzread.info/dash/bejne/a4ys1bOfn67FoLg.html

I have a problem with the remote start to warm the vehicle up

I did this, just as you instructed… now my car won’t start, no power at and my original key fob doesn’t work. Do you know why this would happen??

@PYR-Auto

3 жыл бұрын

sounds the vehicle may still be in programing mode - when you open and close the drivers door are you getting any messages on your dash?

@patriotinstallationsllc1816

Жыл бұрын

Same thing happened to me. No messages. The truck just won’t start or activate. The only way to get it to start is using the remote start but then you can’t even take it out of remote start mode by pressing brake and ignition button. Please help

But where does the physical key go in? Having a little care trouble where my 2015 GMC didn’t go off, it’s like the car has a mind of its own!

How about GMC that got no start button? I only got the key starter one. Pls need help

@PYR-Auto

2 жыл бұрын

There is no manual way to program fobs for non-push button start ignitions but you can program the ignition keys. You can find those instructions here www.programautokeys.com/classified/yukon-browse-794.aspx

Having issue with the key won't fit to turn clockwise on drivers side door?

@therelaxingchannel306

Ай бұрын

It’s counter clockwise

Does this still apply to a 2017 model?

@PYR-Auto

3 жыл бұрын

the 2017 model requires two working fobs in order to be use this procedure

My car is Denali yukon 2015 with 433MHz remote, the new remote is also 433MHz but it doesn't work with me. What is the problem?

@PYR-Auto

2 жыл бұрын

even if the remote is the correct Mhz it could still have other issues

I turned clockwise 5 times within 10 seconds but driver information center doesn't show. Many times.. What's the problem??

@PYR-Auto

3 жыл бұрын

Some vehicles only show the message on the dash right when the door is opened or closed

What if I lost original key what do I do then?? Please respond this would be a life saver thanks lol!

@PYR-Auto

3 жыл бұрын

You can find that video here kzread.info/dash/bejne/a4ys1bOfn67FoLg.html

@1P2ARK05

3 жыл бұрын

@@PYR-Auto they say I need a key code to get it cut do you know the specific key code? 2015 Yukon?

@PYR-Auto

3 жыл бұрын

@@1P2ARK05 Yes, you will need the emergency key cut by code. Every car has a different one. The dealerships and some Automotive Locksmiths can look them up by your VIN

@1P2ARK05

3 жыл бұрын

@@PYR-Auto 💯💯

What if I don't have a functioning FOB or key? Mine was run over by a car and doesn't work anymore.

@PYR-Auto

2 жыл бұрын

You will need a cut emergency key but you can program a new remote without any existing - you can find that video here kzread.info/dash/bejne/a4ys1bOfn67FoLg.html

How about 2017 Yukon SLE no start button, how do I program?

@PYR-Auto

Жыл бұрын

There is no way to manually program the fobs for the non-push button start vehicles. You can program the ignition keys though in many cases. You can find those instructions here www.programautokeys.com/classified/2017-gmc-yukon-ignition-smart-chip-key-programming-instructions-listing-9521.aspx#.YxdiLC2B2w4

@dannydang8536

Жыл бұрын

@@PYR-Auto so what I did was I changed the inside and replace it to the the ones I bought off eBay with the silver chrome trims…but another question would be can I program the newer fobs for my 2017 SLE NO BUTTON SUV?

@PYR-Auto

Жыл бұрын

@@dannydang8536 No - none of the fobs are manually programmable on the non-push button start vehicles.

@ahalfelven1

Жыл бұрын

I have same, with push button start, and all that happens is my anti-tamper horn starts beeping after I open door after the 5 turns.

Didnt work for me. According to the owners manual this method is if you have 2 recognized remotes already. If you have only 1 then you have to follow a different method which requires clearing and then relearning the Original remote. The message display will say Ready for Remote #2 for method one, OR it will say Remote Learn pending for mehod 2 which takes 30 min

This didnt work for me. I bought a used genuine GMC key with matching part numbers and had no luck with this procedure. What did I do wrong?

@PYR-Auto

8 күн бұрын

if you're getting the vehicle into programming mode but the vehicle is not responding to the remote then it is likely a problem with the key fob

@gdc5ind

8 күн бұрын

@PYR-Auto I assumed that and asked the vendor to send me another fob. I might have to buy some type of GM scan tool so I can figure this out. There is no way I would take it to GM for programming when I can buy something that will allow me to scan and adjust things in GM vehicles for what it would cost me to have the program the fob.

Great video but this didn’t work for me

What if the gmc isn’t push to start ?

@PYR-Auto

5 ай бұрын

There is no manual to program the fobs on the non push button start vehicles - you will need an automotive locksmith or dealership. You can program the ignition keys in most cases though - you can find those instructions at www.ProgramAutoKeys.com

My 2018 Yukon doesn’t have push to start

@PYR-Auto

2 жыл бұрын

Then you will need a locksmith or dealership to program additional fobs

Mine wont start from thenoutsidw of the Vehicle

@yennyasanchez

2 жыл бұрын

My remote start won’t work either

My 2019 Chevy Silverado all it will say is remote learn pending

Help me pleeeeease

Didn’t work for me

Now car want even turn on shit