This is the instructions I used for my make, model and trim. You can use the menu to select yours. www.programautokeys.com/classified/2019-chevrolet-silverado-ignition-transponder-chip-key-programming-instructions-listing-9400.aspx#.YIRH2pBKiUk

@terryjohnson3383

9 ай бұрын

Are there any instructions for key that has to go in ignition? I have keys programmed as Driver 2 and Driver 3. I would like to reprogram my keys as Driver 1 and Driver 2. Is there any instructions for that? (2018 Suburban)

@PhoenixHavenGarage

9 ай бұрын

@@terryjohnson3383 I think it's the same procedure as this will clear all FOBs associated with the truck

@terryjohnson3383

9 ай бұрын

Well i think the fobs are fine. I want to know if the keys are totally separate from the fob. Basically once I put my key in the ignition, it says Driver 2 memory. With my other key, it says Driver 3 memory. Will this method erase keys or just fobs?

@PhoenixHavenGarage

9 ай бұрын

@@terryjohnson3383 sorry, I do not know.

I lost one of my key fobs and felt really uncomfortable not having a backup. I ordered one after watching this video because you made it so simple. Everything went exactly as your video explained. Thank you, kindly!

Worked like a charm on my 2021 Silverado 3500 with a new fob from amazon! With bucket seat/center console interior, place the fob in the rectangular area between the two cup holders to program. Thank you for the video! Saved me some $$$!

thank you sir for a very detailed video on this. I followed it and the procedure worked in getting a 'failing' key fob to work. We purchased a used 2020 Silverado a few weeks ago and they gave us two fobs with it but we didn't try the 2nd one until a day or two ago and it would not do anything. Found your video and it has saved a trip back to the dealer, possibly two times to allow them to do their 'thing'. Thank you so much again!

@PhoenixHavenGarage

2 ай бұрын

Awesome! I'm glad this was able to help you save $ and time

I just used your video to program one off Amazon and it all works perfectly and I took our truck key out of our second GMC one, which had been ran over by a school bus, and inserted it in the Amazon one. We now have two perfectly working keys!

@PhoenixHavenGarage

11 ай бұрын

That's awesome, I hope the kids on the school bus are OK 😁

If you put the existing working remote in the cup holder before you start, then turn the key counter clockwise 5 times, the display will show “ready for remote 2” and you can program the new remote without wiping out the old one. Also, adding a key doesn’t take 30 minutes, takes about 15 seconds If you have NO working keys at all, then the 30 minute procedure is essential.

@travisdieringer3420

Жыл бұрын

Any idea why when I put my fob that works in the cup holder, and turn key 5 times, I get start vehicle to view application

@armandojimenez8342

11 ай бұрын

@@travisdieringer3420i get that with mine too

@danielwhite1583

10 ай бұрын

Is this how I would do it for my 2019 Silverado LD?

@ACheriBerry

10 ай бұрын

This only works on certain models and if you have 2 keys already programmed

@alongwithposeidon2323

19 сағат бұрын

​@travisdieringer3420 It's a default notification that you need to dismiss. The key program notification is behind it. I just made this mistake 10 minutes ago. Now I have my 3 keys numbered wrong, and the 4th key will not program. I think the maximum is 4 keys since it won't at least let me program the 4th key as the 5th. Since I'm picky, I'm going to delete all programed keys and start over.

Thank you for this video. Dealership wanted $500 for a replacement fob. $30 OEM from ebay and your video saved me $470. I did not get the extra fob key cut yet, so I'm sure that will be a few more $$.

OMG!!! 😳😲 I looked for a key online but couldn’t find one!!!! Never thought EBay 🤦‍♀️🥺 So I bought one from dealership 😢 BUT it was lunch time so they couldn’t program it (1 hour and ANOTHER $170) he told me!!! I was bummed and told them I’d return!!!! SOOO GLAD I FOUND YOU!!! I am trying this myself!!!! A friend of mine told me look on KZread for a tutorial I was afraid I couldn’t find one!!

Just used your new key khob steps on my 2019 Chevrolet Silverado 1500 RST and it worked just as you said thanks for the how to video.

@PhoenixHavenGarage

Жыл бұрын

Awesome, I'm glad it worked out for you!

Worked for my 2021 GMC Sierra. Thank you for making this video

Worked like a charm. Thanks, Bud!!!

Just received my 2nd key fob from dealer since my 22 Sierra only had one fob and luckily the dealer had it cut already ( they already had my Vin so that how they probably were able to). Your video worked perfect saved me $115 locally to have it programmed

@PhoenixHavenGarage

3 ай бұрын

Awesome, I'm glad you found this video!

2020 sierra 2500 at4… worked great! Thanks

Thanks man!!! I hit it done easily. For different model trucks the key fob holder is between the cup holders. Now just gotta go get my key cut!! Appreciate ya!!

@PhoenixHavenGarage

10 ай бұрын

Glad it worked out!

Works like a charm. Thank you!!

Worked perfectly on my 2020 trailboss. Thanks

Worked step by step excellent on my 2020 RST. Thanks for the video.

@PhoenixHavenGarage

Жыл бұрын

Awesome!

Thank you so much worked for my 2020 trailboss

Worked perfectly! Could not have done this on my own without your video.

@PhoenixHavenGarage

9 ай бұрын

I'm glad you saved some money and got it working!

Thank you so much. Your instructions were well appreciated Worked the first time. :)

@PhoenixHavenGarage

3 жыл бұрын

I think the 10 min wait times are so the dealer can charge over 30 min of service time to everyone

I watched your video and I was able to reprogram 2 new key fobs. Thank you very much!!

@PhoenixHavenGarage

8 ай бұрын

I'm glad it helped you out!

Thank you!!! It worked !! Appreciate it!!!

Worked perfectly! Thank you so much

Worked perfectly. Thanks!!

Used your video today on my 2020 GMC Sierra. It only had one key fob when I bought it. It has the split front seat, so the programming pocket is between the cup holders, but the procedure worked perfectly. Thank you for precise, accurate instructions. Everything was spot on!

@PhoenixHavenGarage

2 жыл бұрын

Awesome, I'm glad it worked and that you didn't need to go to the dealer and pay 💰💰💰

@pewpew1042

2 жыл бұрын

@@PhoenixHavenGarage Me too! Found a new, GM packaged key fob online with a blank blade key, had a local locksmith cut the blade for $40, and followed your video. Being able to wipe and reprogram my old one and the new one was exactly the info I needed, so thanks again! Much cheaper than the dealer’s $400+ quote for a new fob.

Very helpful, thank you for this video!

@PhoenixHavenGarage

3 жыл бұрын

Thanks for the support, good luck!

Hell yes it worked. Many thanks for posting this video!!

@PhoenixHavenGarage

Жыл бұрын

F Ya! Glad you didn't have to go to the dealer!

This was Great 😃. Thank you

Awesome video this work on my 2020 Silverado 1500 Duramax my remote had to placed in between cup holders

Worked on my 2020 Chev Silverado 🎉😊

that 12 second hold is something NOT in the manual and is critical. thanks for bringing that up. had accidentally cleared my 2 good fobs trying to add a 3rd, had to go thru toe no recognized fob procedure.

Yours the best man!

Thank god for KZread the dealer wanted to charge me 150 to do this lol thx again !

Thanks for the video. Everything worked like a charm and you saved me a good chunk of money.

@PhoenixHavenGarage

4 ай бұрын

I'm glad you found the video!

worked perfect thank you!!!

Works for 2021 silverado 1500 LT Trail Boss thank you 🇺🇲💪🏽

I did this. FOBS still don't work. Replaced battery's. Had the front 2 windows and windshield tinted with ceramic film today. Started when I got truck home from shop. Water all over the dash when I picked the truck up. Awesome. Thanks guys. Now the the tire pressure sensor monito warning light is on as well. Sweet.

@victormaldonado7595

8 ай бұрын

Same thing just happened to me today after tinting my windows and windshield did you get it fixed and how

@Anvita444

8 ай бұрын

I did what the guy did in this video... Next morning still didn't work. I drove it for a few hours and it just went away. I think it's moisture in the sensor in the dash. Needs time to dry out.

@albertfuentes4386

4 ай бұрын

Worked beautifully

@Anvita444

4 ай бұрын

@@albertfuentes4386 nice. I actually got it to work for me as well...i think....I just drove it for a few hours the next day and the FOB started working again....I think running the heater for 3 hours just dried things out

Worked with non-OEM $30 fob. But have to put key in transmitter to start 😕. Remote start, lock/unlock, and tailgate buttons work.

Thank you! The dealership could have shared this with me instead they told me to have it towed to them.

@PhoenixHavenGarage

5 ай бұрын

Wtf? That is unbelievable! I'm really glad you found this video and saved yourself hundreds of dollars and time wasted with them.

Thank you! Just saved me a couple hundred dollars the dealer wanted to charge me to look at it 😊

@PhoenixHavenGarage

5 ай бұрын

Yeah, to hell with them! I'm glad you found the video!

Thanks!

Giving away dealership secrets man because isn't this the same thing that they want to charge you north of $500 to do there?

@PhoenixHavenGarage

3 жыл бұрын

Yes it is

@B.I.-EIO_macdonald9786

Жыл бұрын

I don’t know you. Nothing personal but i think i ❤You. 😮🎉

Will this process work on a 2022 Silverado?

What year is your truck? Did the tailgate release work? I have a 2019 GMC Sierra AT4. Thanks for any info.

@PhoenixHavenGarage

2 жыл бұрын

2019. Yes everything works

Thank you! Was successfully able to program second key. However, the trouble tap to open lift gate is not working on new key. It works with the original key. How do I program that?

What if I only want to program a new fob but have my old key? because my remote start stopped working on the old fob so I bought a new one without a key

Did you have to get the new fob key cut to the old one or does it work uncut as it comes in the package?

@PhoenixHavenGarage

2 жыл бұрын

You need to get it cut. What is funny is we recently found the lost fob with the cut key in it.

@DirkHagandTruth

2 жыл бұрын

@@PhoenixHavenGarage Thank you, and thanks for the video, very helpful.

Will this process work with a 2018 Silverado? I have no key fobs now and need them. I have already bought OEM key fobs. I just need to program them!

@PhoenixHavenGarage

2 жыл бұрын

I honestly don't know, but the link in the description of the video should have written instructions for all makes and models.

Thanks saved me $80

@PhoenixHavenGarage

2 ай бұрын

🤘🤘

My truck doesn’t have that little compartment in the center console for the key fob 2020 Silverado

@PhoenixHavenGarage

2 жыл бұрын

Check the seat compartment below the main armrest compartment as I show in the video. Otherwise I'm not sure where else it would be

Will this work on a 15 ‘ 2500 GMC Denali ?

I did this on my Chevy Silverado 1500 2021 Trail Boss worked with my original fob was trying to program the spare key fob they gave us at the dealership which turned out to be a dud does not work but now I have the car lock symbol on the dashboard( the theft deterrent system) anyway you can make a video on how to reset that I've already tried unplugging the battery no luck thanks for the video great job

@PhoenixHavenGarage

Жыл бұрын

I found this To reset the anti-theft system on the Chevy Silverado You will need to get into the car and lock the doors. Now with the doors locked put the key into the ignition and turn it to the on position. Let it sit there for 5 minutes until the anti-theft light blinks. Once it blinks You will need to turn it to the off position, then turn it back to the on position. Now wait for a min and it will blink again. Turn it off then on one more time. When it blinks for the third time go ahead and start the engine. The anti-theft is now reset. www.vehiclehistory.com/questions/how-do-i-reset-anti-theft-system-chevy-silverado-93695 Just push the ignition button to put the truck into the same selection/position as mentioned

Does this also work for 2021 custom Silverado without a keyless start button

@PhoenixHavenGarage

Жыл бұрын

This is where I found the instructions that I filmed. I think it had different instructions for multiple options on the vehicle. www.programautokeys.com/classified/2019-chevrolet-silverado-ignition-transponder-chip-key-programming-instructions-listing-9400.aspx#.YvZvcHbMKM9

I have a separate key .. No keyless remote. Will this still work? Also I don't have push button it a key switch. Will this still work by turning the key to push the button

@PhoenixHavenGarage

Жыл бұрын

I do not know, but the website where I found the instructions to make this video has instructions for all of the different key options: www.programautokeys.com/classified/2019-chevrolet-silverado-ignition-transponder-chip-key-programming-instructions-listing-9400.aspx#.Y1v9cnbMKM-

I actually got stuck in programming mode the first time I tried this. The original fob would unlock and lock, start via remote, but not allow operation of the truck. Talk about stressful situation 😅 Not my vehicle either. Some where through the process, I had hit a button on the steering wheel. Got it out of this issue, and successfully programmed the original fob, but not an additional (it isn't exactly fob, but I believe it should work). Trying again 🙏🏽

@PhoenixHavenGarage

Жыл бұрын

Glad to hear it got sorted out!

@tbaker9409

Жыл бұрын

@@PhoenixHavenGarage On second attempt, the same results. First fob programmed, second didn't. This time the service theft deterrent warning came on! We tried to reset that via leaving battery disconnected for 15+ minutes without success. We managed to override the theft deterrent system by holding the key in the door lock, in the unlock position for 30 seconds. It then allowed the vehicle to start. The owner took the vehicle to a dealership and they quoted him $741 for 2 fobs! The service tech claimed the fobs are 1 use only, as in can only be "programmed once" LMAO! Service tech also told him by having fobs that aren't for the vehicle inside the vehicle while programming breaks the working fobs. Talk about a piece of work this person is. The owner of the vehicle is non-English speaking, and in my opinion, being taken advantage of by a greedy gm tech. Pretty certain GM service techs are financially motivated by labor hours from previous experience. While out of town, my wife was charged 11 hours labor to change 3 fuel injectors. On an LS3 engine. Amounts to 10-12 bolts and maybe replacing O-rings.

@PhoenixHavenGarage

Жыл бұрын

@@tbaker9409 11 hours for fuel injectors on an LS? Nothing beats a trust worthy mechanic.

@lucascritelli3339

Жыл бұрын

Can you tell me how you got out of programming mode I think I did the same thing and now I can’t do anything

@DrewJenkins-hy7ei

Жыл бұрын

How did you fix the issue?

Is there a way to do it for a non push start?

Do you need to press the brake before you hit the start button? Thanks ordered my key today!

@PhoenixHavenGarage

Жыл бұрын

no

Thanks! Saved me $600 from the Stealership

@PhoenixHavenGarage

Жыл бұрын

Yeah, F that! I'm glad you found this video and it worked

Do you have both remotes inside the truck when this starts?

@PhoenixHavenGarage

Жыл бұрын

It does not matter where the remotes are, you're clearing the memory in the truck's computer. You just need to place them in the programmer in the center console when it is time. They can be inside with you.

great video but I 🤔🤔 i can't do on my 2022 because i do not have push buttons for engine start. any idea??

@PhoenixHavenGarage

Жыл бұрын

They may have updated instructions for different truck options. www.programautokeys.com/classified/2019-chevrolet-silverado-ignition-transponder-chip-key-programming-instructions-listing-9400.aspx#.Y-qT1-ROnkx

Having no luck with new remotes. Do the remotes have to be unlocked or turned on to program? The only thing the new remote will operate is the door locks. To turn on the engine I have to put the fob in the pocket. Any thoughts?

@papabonez33

10 ай бұрын

Mine did the same thing, did you figure it out

@cappy208

10 ай бұрын

@@papabonez33 I never got the remotes linked in the post to fully program. However. The original remotes reprogrammed fine using this method. The linked remotes only lock/unlocked and allowed to start. The tailgate remote never worked.

Do you have to press the brake when you push the start button?

@PhoenixHavenGarage

Жыл бұрын

no

I'm on the fence about trying this for my 2021 GMC Sierra. My Key fob is acting up like the battery is dying and randomly saying "remote not detected" (replaced with a new battery) Dealer wants $250 to diagnose. Would you happen to know if re-programming my fob will solve my issue?

@PhoenixHavenGarage

2 ай бұрын

Maybe the fob is faulty/failing? Do you have more than 1 fob? I would suggest getting a new fob so you have a 2nd one, then attempt to re-program. Make sure the truck is parked out of the way of things in-case re-programming fails. I do not know too much about troubleshooting the fob system. I only found instructions on how to re-program a fob and made a video covering it.

Glad to see it worked for many people. However, i have one working transmitter and just need to program the other. My new transmitter, fob, has the key cut. It works. I can lock and unlock with key. When i start the very first step, my dashboard does not display anything. Blank. I turn the key, counterclockwise 5 times. Nothing. I use both working transmitter key and non working transmitter key, the one I want to program. Should all doors be unlock, tailgate closed. Should i have my non working transmitter already in the slot to be programmed? Hold my breath? jump on one foot while barking like a dog?

@PhoenixHavenGarage

11 ай бұрын

This is the instructions I used for my make, model and trim. You can use the menu to select instructions for your exact truck. www.programautokeys.com/classified/2019-chevrolet-silverado-ignition-transponder-chip-key-programming-instructions-listing-9400.aspx#.YIRH2pBKiUk

@user-qi2ef4ut2o

11 ай бұрын

Okay. Same link I used for the instructions. I remembered that my truck came from the great white north, so if I read correctly, these steps will not work, and I have to take my fob to a dealer.

I have gmc sierra 2019 made in Canada doesn’t have a engine start button, does any body knows how copy the fob remote of this vehicle?

@PhoenixHavenGarage

Жыл бұрын

This is where I found the instructions for my model. I think there are instructions for ones where an ignition key is required. www.programautokeys.com/classified/2019-chevrolet-silverado-ignition-transponder-chip-key-programming-instructions-listing-9400.aspx#.Y0hF6nbMKM9

I bought a 2019 Silverado at auction came with no keys would I be able to do this procedure if I start out having no previous fob?

@cappy208

Жыл бұрын

You need the cut key. Copy VIN and go to dealer. They can cut a key. Need proof of ownership, license for them to cut for you. How are you starting it now?

I program keys at the dealership, and I just want to say, "You took my job!" Baka daka dur, "You took his job"

I did this procedure and it seems that everything worked properly but now my remote start doesn't work on either key and it used to work on the original one. Curios if there was a cause of me doing something wrong or I should redo them both again.

@PhoenixHavenGarage

4 ай бұрын

Did you buy new remotes that are the same? Make sure the doors are locked when you do the remote start.

Hey bud, did the steps and got the keys programmed but after the complete set up still says no key fob detected, we changed batteries in both remotes, any idea what else it could be?

@PhoenixHavenGarage

Жыл бұрын

Hhmm, maybe it's something with the truck's electronics? These are both new fobs?

@evilclowns5403

Жыл бұрын

Yes sir both new, we recently discovered a rodent of some kind has been chewing on the interior and thinking it chewed on some wiring as well. Probably why it's not reading the FOB in the holder on the bottom seat, I did everything you had on your video. Awesome info BTW. We'll have to take it to the shop and let them figure it out.

@PhoenixHavenGarage

Жыл бұрын

@@evilclowns5403 Yea, good luck!

Awesome! Does the remote start work? Or is there a separate procedure?

@PhoenixHavenGarage

Жыл бұрын

It should work. I think on mine the doors need to be locked for it to work

Seems the new remotes only lock/unlock. Wont do tailgate. And one remote starts. Other won’t. Can I start over and reprogram? Or is this a one shot programming per remote?

@PhoenixHavenGarage

Жыл бұрын

You can do this as many times as you like.

@papabonez33

10 ай бұрын

Mine did the same, did you figure it out

My truck won’t go into remote learn pending after turning key 5 times. Any ideas?

@PhoenixHavenGarage

Жыл бұрын

See if your truck's features have different instructions. These are the directions I used. www.programautokeys.com/classified/2019-chevrolet-silverado-ignition-transponder-chip-key-programming-instructions-listing-9400.aspx#.YIRH2pBKiUk

I have a 2021 Chevy Silverado 3500HD. I've turned the physical key counterclockwise 5 times but nothing happens. There's no message on the dash. Any idea what I might have missed?

@PhoenixHavenGarage

2 ай бұрын

This is the instructions I used for my make, model and trim. You can use the menu to select yours. www.programautokeys.com/classified/2019-chevrolet-silverado-ignition-transponder-chip-key-programming-instructions-listing-9400.aspx#.YIRH2pBKiUk

Hello, I have a 2015 Chevy Silverado 3500 HD. My key is programmed, but my remote is not. Is it possible to program it. I only have one remote for the truck…

@PhoenixHavenGarage

Жыл бұрын

I don't understand, the key FOB is the remote.

Will this work for Colorado 2018? Thanks

@PhoenixHavenGarage

3 жыл бұрын

The link in the description to the instructions has an option to look up your truck. If not the same, it may be similar.

What of you do t have push button start?

@PhoenixHavenGarage

2 жыл бұрын

The link in the description allows you to see the instructions I used for this video and for other options, like needing the key to start.

My old remote broke so I bought a new one. I have 2 keys, one for the remote that works, and one for the new. Followed the directions and the display showed every step completed. When I started the truck I used the remote that is still working. Everything worked. Then I tried the new remote. The lock feature worked but the truck wouldn't start. Then the display said place the remoted in the lower console cup. I did and the truck started. I took the remote out of the cup and the truck wouldn't start. What am I doing wrong?

@PhoenixHavenGarage

8 ай бұрын

Check and make sure the instructions are the same for your year, make, model, and trim www.programautokeys.com/classified/2019-chevrolet-silverado-ignition-transponder-chip-key-programming-instructions-listing-9400.aspx#.YIRH2pBKiUk

My 2020 silverado doesnt have engine start button and i dont have the compartment with the slot not sure how to program it.

@PhoenixHavenGarage

Жыл бұрын

This is the instructions I used for my make, model and trim. You can use the menu to select yours. www.programautokeys.com/classified/2019-chevrolet-silverado-ignition-transponder-chip-key-programming-instructions-listing-9400.aspx#.YIRH2pBKiUk

Does this same procedure work on 2500 hd (diesel)?

@PhoenixHavenGarage

Жыл бұрын

These are the instructions I used when filming the video. This is for a Silveraldo HD www.programautokeys.com/classified/2023-chevrolet-silverado-hd-ignition-fob-smart-chip-key-programming-instructions-listing-11329.aspx#.ZD2ys3bMJPY

hi i'm trying to program my new remote on my gmc sierra 2019. i insert the key and do the time trial 5 times and nothing comes out on my screen.

@PhoenixHavenGarage

3 жыл бұрын

hhhmm. The link in the description has the instructions for multiple vehicles. I'll check it and see if I can find one for your truck

@PhoenixHavenGarage

3 жыл бұрын

www.programautokeys.com/classified/2019-gmc-sierra-ignition-transponder-smart-chip-key-programming-instructions-listing-9501.aspx#.YKrP4KhKiM8

@PhoenixHavenGarage

3 жыл бұрын

The instructions look different for GMC, but this should work. Good luck

@juegosgg241

3 жыл бұрын

I have already tried and it still does not work, because the first procedure with the key in the door but my screen does not respond, but well, thanks for the information.

@JimmyGreen9

2 жыл бұрын

@@juegosgg241 are you in Canada? Same issue and I don’t know for sure yet but I read on one comment that only vehicles in the US can do this… still searching

Will this work for a 2022 Chevy Silverado 3500HD DRW?

@PhoenixHavenGarage

Жыл бұрын

These are the instructions I used. You can select year, make, model, and options. I don't know if 2022 is listed, but the truck design has not changed really www.programautokeys.com/classified/2019-chevrolet-silverado-ignition-transponder-chip-key-programming-instructions-listing-9400.aspx#.Y5h-j4ZOnkx

Hi I went through the process and I got my original fob and the new one to work but now it the unlock button on the outside door doesn't unlock.

@PhoenixHavenGarage

2 жыл бұрын

I would check google for that. Are you sure it worked before you reprogrammed the FOB? No one else has reported this.

@jamesstrider9926

2 жыл бұрын

Yes it worked before

I have a 2019 chevy high country, my trk dosen't have that slot in the console. Where would i put the fob to learn

@PhoenixHavenGarage

Жыл бұрын

I think it is the square section of the cup holder in the center console. Place it face down in the middle section.

@pinkypusher5135

Жыл бұрын

Worked, but the new fon dosen't work the remote st or tailgate

I had a fob go bad and not sure where I put it. I just purchased a new back up for 260, but they said I needed to come back and it would take 2 hours to program.

@bakervinci163

6 ай бұрын

This is the 8th truck I have purchased from them.

@PhoenixHavenGarage

6 ай бұрын

I would see if this works 1st. It has for a lot of viewers. It's a scam at the dealership to charge 2hr of labor.

When you’re waiting the 10 minutes where are your fobs? In or outside of the truck

@PhoenixHavenGarage

Жыл бұрын

They do not need to be in the truck until you need to insert them into the programming slot in the center seat compartment.

Will this work on a 2020 Chevy Suburban LS with a key No push to Start button ?

@PhoenixHavenGarage

Жыл бұрын

These are the instructions I used. Just pick and look for your truck and options. www.programautokeys.com/classified/chevrolet-make-538.aspx

@fctinc1

Жыл бұрын

I meant how to program the key fob remote not the actual key

Will it work on 2022 Silverado 1500 2.7 turbo 4cyl

@PhoenixHavenGarage

10 ай бұрын

This is the instructions I used for my make, model and trim. You can use the menu to select yours. www.programautokeys.com/classified/2019-chevrolet-silverado-ignition-transponder-chip-key-programming-instructions-listing-9400.aspx#.YIRH2pBKiUk

Ok I have a good one for you. I remote started the truck on my way out of work. I opened the door as usual but I wanted to check a fuse situation under the hood. I didn’t get in the truck and pressed the brake and the button first. The truck shut off and said steering column lock. I disconnected the battery for a little bit and got rid of that but the fob wouldn’t work after that. I followed your instructions perfectly and both of them still don’t work. I don’t know what else to do.

@scottheykoop4609

Жыл бұрын

Forgot to tell you it’s a 2021 Silverado crew cab LT 2wd with 5.3

@PhoenixHavenGarage

Жыл бұрын

@@scottheykoop4609 Change the battery in one of the FOBs and try again? There might be different instructions for you year and options. These is the site with the instructions that I used for my 2019. It has different instructions for some years. www.programautokeys.com/classified/2001-chevrolet-silverado-ignition-transponder-chip-key-programming-instructions-listing-7638.aspx

Hello I am trying to help my BIL he got a 2020 Sierra AT4 and only got 1 key with it. He has 2 new keys he wants to program. I am getting stuck on the first step though. I opened the door all the way and put the key in the door and turned it counterclockwise 5 times and the screen on the dash goes dead. It never goes into "learning" mode. I tried closing the door and opening it back up to see if anything changes but it just shows "engine time" never "learning" mode. Am I doing something wrong?

@PhoenixHavenGarage

Жыл бұрын

This is the website with the instructions I used. This is the link to the 2020 sierra. good luck www.programautokeys.com/classified/2020-gmc-sierra-ignition-transponder-chip-key-programming-instructions-listing-9342.aspx#.ZDGMZHbMJPY

@travisdieringer3420

Жыл бұрын

Same thing happening to me

Didn’t allow me to reprogram second remote and now I have a theft error that won’t go away

@motoxbreakdown

Ай бұрын

Did you ever figure it out? I have the same issue

@hinesandshine

Ай бұрын

I have the same problem on my 2022

@stephenscrivens6789

Ай бұрын

I also have that problem! 2021

@hinesandshine

Ай бұрын

I had to take my truck to the dealership and they fix the problem. These newer vehicles are putting do it yourself guys like myself out of business. lol

@robbiesurface9755

Ай бұрын

@@hinesandshinewhat did the dealer charge to fix the issue?

17 silverado with no push start what are my alternatives?

@PhoenixHavenGarage

2 жыл бұрын

The instructions in the description have information on how to perform the pairing with other years of the truck and option like needing the key

@carlosramos1189

2 жыл бұрын

@@PhoenixHavenGarage description is kinda useless , only way to do this on a 2017 as of today is with a locksmith. Your video shows for different older model not multiple

My 2016 does not have a start button

@PhoenixHavenGarage

2 жыл бұрын

The link in the description has instructions for different versions of the many trucks and options.

I followed process. Now none of me fobs work.

Push start on my remote. acting funny sometiming. seems after reprogramming sometimes it's start sometimes it don't

@hangmann747tinmann8

2 жыл бұрын

Just a reminder, on new cars, if your check engine light is on, it deactivated the remote start capability. The fob is still programed, the vehicle itself turn the start function off, it's an attempt to force you to get it fixed.

Is this the same process for a 21 Silverado?

@PhoenixHavenGarage

9 ай бұрын

This is the instructions I used for my make, model and trim. You can use the menu to select yours. www.programautokeys.com/classified/2019-chevrolet-silverado-ignition-transponder-chip-key-programming-instructions-listing-9400.aspx#.YIRH2pBKiUk

Interesting is that I have a 2017 GM and it does not have a start button, rather has a key on the column.

@PhoenixHavenGarage

Ай бұрын

This is the instructions I used for my make, model and trim. You can use the menu to select yours. www.programautokeys.com/classified/2019-chevrolet-silverado-ignition-transponder-chip-key-programming-instructions-listing-9400.aspx#.YIRH2pBKiUk

will this work on a 2022 rst?

@PhoenixHavenGarage

Жыл бұрын

This is a link to the instructions I followed to make the video. You can see if it has directions for you make and model. kzread.info?event=video_description&redir_token=QUFFLUhqa1FzMzMwQlZCMlRhOGt3UG5walBDcDF5a2s1QXxBQ3Jtc0tuVzhSOXZQNEx1WWRiaUhKUzRhRG9hRG14dVFZNU85MWZaVTNUU19aeW9malNUNE5EM0I1dWxFam5YZjFEZVBpVHpsemFKOGVVX21sZDV5OEpRRUZMdFpTUTN2RHZLdzQ0VzRLX1VRdDF4bUZBWFQ3SQ&q=https%3A%2F%2Fwww.programautokeys.com%2Fclassified%2F2019-chevrolet-silverado-ignition-transponder-chip-key-programming-instructions-listing-9400.aspx%23.YIRH2pBKiUk&v=qjH3Uv-24rc

Will this work for a fob that doesn’t have a cut key? Or does the key have to be cut to program it? Thank you for your video by the way.

@PhoenixHavenGarage

16 күн бұрын

@@ghostrider-gm2wg I think you need a key to start the process with the door lock

@ghostrider-gm2wg

16 күн бұрын

@@PhoenixHavenGarage Yes, I have one original key they gave me. But I got one uncut key from Amazon. What I meant is, can I program the uncut key using the original key. Thank you for your response.

@PhoenixHavenGarage

16 күн бұрын

@@ghostrider-gm2wg yes, you can reprogram as many FOBs as you want with 1 cut key.

@ghostrider-gm2wg

16 күн бұрын

@@PhoenixHavenGarage Thank you for your help. Keep up the great vids

I don't have a center.seat

How much was it to cut the new key from ebay? Thanx by the way! This will save me a ton of time and money!!!

@PhoenixHavenGarage

8 ай бұрын

The key has to be cut at the dealer I think. The fob was like $30 I think.