2006 Saab 9-3 Tid Sport , EGR valve removal and clean

Автокөліктер мен көлік құралдары

short video of a saab 93 egr valve removal and clean , the soot that had clogged up was unreal , i know i should of changed the egr , but this is good enough for now , and made a huge differene to the car...

Пікірлер: 30

  • @karlmorrissey1834
    @karlmorrissey18348 жыл бұрын

    great video. car running perfectly after egr valve decide to clog up. keep up the good work.

  • @mircasucci3502
    @mircasucci35026 жыл бұрын

    Grazie del tutor..ho seguito le tue istruzioni e ho risolto il mio problema... semplice e chiaro. grazie..

  • @Sprity69
    @Sprity697 жыл бұрын

    Thanks for the Video!

  • @jaytol1
    @jaytol1Ай бұрын

    can purchase new EGR valves now for £29.00 you can also unplug it if you are stuck in limp mode to get home car works perfectly if not better but will need replacing or cleaned as your DPF wont regenerate.

  • @Carlostype
    @Carlostype8 жыл бұрын

    while I was cleaning mine I also quickly removed the anti shudder valve on the side, it was full of oil over the circuit board. And the map sensor gets choked up also 👍

  • @paulraynard2226

    @paulraynard2226

    8 жыл бұрын

    ye mate am goin g to a strip down the whole throttle body and do a video on it , cheers pal

  • @DobbsyLondon

    @DobbsyLondon

    Жыл бұрын

    I noticed my MAP sensor was caked in coke too bud.

  • @Invenzione1
    @Invenzione15 жыл бұрын

    grazie

  • @kondwanimunthalimusic
    @kondwanimunthalimusic3 жыл бұрын

    Where exactly is the location a saab93 1.8t 2004 model? Dont seem to find it

  • @DobbsyLondon
    @DobbsyLondon Жыл бұрын

    What's the view at @05:05 mate? (Cheers for the video btw) I've had the 1.9 TiD (150bhp) for 2 weeks now and it's not got the oomph, went into low performance mode after 2 days. Checked the map sensor during a lunch break at work and it was caked in shit. Cleaned it off and low perform wa ring went off. Looking forward to cleaning rhe EGR this weekend (!assuming slitarse and kids let me) I've found the torque settings for putting the bolts back. Any tips for cleaning rhe pipe mate? Heard EGR delete is an option but surely that kills a bit of the engines potential off? Good use of jobs gorillapod too bud 😉

  • @Lacipapa.55
    @Lacipapa.55 Жыл бұрын

    Az ideggyógyászaton készült?

  • @marrep
    @marrep8 жыл бұрын

    Do you know if the placement and procedure is the same on my saab 9-5 2006 1,9TID? DOnt feel like buying a new EGR-valve since it's so incredible expensive..

  • @paulraynard2226

    @paulraynard2226

    8 жыл бұрын

    should be mate might be in a differnt location thou

  • @marrep

    @marrep

    8 жыл бұрын

    +Paul Raynard Damn you're fast at answering! I will check it up when I get home! How long time would you think a novice mechanic would spend on it? Thanks for reply

  • @paulraynard2226

    @paulraynard2226

    8 жыл бұрын

    +Marius Helland about a hour 20 mate

  • @marrep

    @marrep

    8 жыл бұрын

    +Paul Raynard Okey I've got another question.. I have dissmounted my valve and cleaned it but I still think it feels a bit "slow" when I "open" it with my hand.. I didn't have to puch much preassure in but the begining felt like it was a bit more resistance from when it's open a bit.. Is this normal? Sorry for my terrible explenation..

  • @paulraynard2226

    @paulraynard2226

    8 жыл бұрын

    +Marius Helland , yes mate this is normal , the swirl flaps in side your i let manifold will be sutted and clogged

  • @scottmarsh1785
    @scottmarsh17857 жыл бұрын

    Have a problem with my saab 2006 vector every now and again it smokes bad but once key turned off and on again it go back to normal help!!!!

  • @molotov4445

    @molotov4445

    4 жыл бұрын

    I got the same issue ! Did you find twhat the problem is ? Thanks a lot

  • @scottmarsh1785

    @scottmarsh1785

    4 жыл бұрын

    @@molotov4445 lambert sensor in exaust

  • @richardtaylor7754
    @richardtaylor77544 жыл бұрын

    Hi Paul. My 2005 1.9 tid shakes when switching the engine off. Would it be worth doing this?

  • @paulraynard2226

    @paulraynard2226

    4 жыл бұрын

    Yes mate

  • @richardtaylor7754

    @richardtaylor7754

    4 жыл бұрын

    @@paulraynard2226 Hi Paul did this and car has started to loose power at 3000rpm and won't go any more. Tried another clean of the throttle body mag and BCV in head but still scratching my head have you ever had this with your ride. Cheers Richard

  • @paulraynard2226

    @paulraynard2226

    4 жыл бұрын

    is it in limp mode mate ?

  • @aleksandrzinkevics1253
    @aleksandrzinkevics12536 жыл бұрын

    What was the symptoms? Black smoke under acceleration?

  • @paulraynard2226

    @paulraynard2226

    6 жыл бұрын

    +Aleksandr Zinkevics it was mate and rough idle

  • @lushnads
    @lushnads7 ай бұрын

    I had a tid from 2012 till this year. Never needed to replace the egr as I used to clean it out every year. I learned in the end, as I had no dpf I could unplug it thus not getting the crap put into the manifold from it 😂 Also worth taking the throttle housing off and scraping out as much gack out the manifold as you can reach, also clean the maf sensor. (just done this on my ttid) it was a mess! 😢

  • @TheHell666yeah
    @TheHell666yeah7 жыл бұрын

    150hp car or 120hp?

  • @paulraynard2226

    @paulraynard2226

    7 жыл бұрын

    TheHell666yeah 150 mate

Келесі