2000 GMC Z71 2500 Gauge Cluster Swap
Автокөліктер мен көлік құралдары
I wanted to add a transmission temperature gauge to my 2000 GMC Sierra 1500 Z71. I purchased a Gauge cluster from a 2000 GMC 2500 that had a tranmission temperature gauge. I swapped in the gauge cluster and had my mileage programmed into the 2500 gauge cluster.
Пікірлер: 50
I have to say your video was right on point. Everything went just like you described. my old 1500 Z71 Custer was kind of beaten , so I look for a new one and wanted to upgrade with the Trans temp Gauge. I found one on eBay,believe it or not, for about $70. so I jumped on it, because that's a great price even if it didn't work it's not a lot to lose. I got it about 3 or 4 days, and it is.great. I got it installed in about 5 minutes and will may go and get it reprogrammed for the actual mileage. however I don't intend to sell it anytime soon, and if I did I would just provide the old gauge cluster and tell a buyer what the calculated miles are.
Very nice. I found one at pick n pull. Since my current one has a short and goes crazy when I’m driving…… hopefully this replacement isn’t a bad part
Well that answers my questions..to the pull yard i go haha thanks man
@mjmcomputers
5 жыл бұрын
Thanks for watching.
Sounds like it is cheaper to just have the transmission temp gauge added to the existing cluster. There are places on the internet that will add it for less than $100.
I have a question when you replace a digital cluster does the miliage change or they stay the same ?
@mjmcomputers
4 жыл бұрын
Mileage is stored in the cluster. You have to get your mileage programmed into the new cluster.
@mikeskidoo3991
2 жыл бұрын
Just swapped an 05 2500hd cluster with trans temp into my 07 Sierra rcsb classic and plugged right in, now I got trans temp and a cluster with all motors that work (old cluster had 2 gauges that failed) $100 for low mileage good cluster and works with no programming
I have a 2000 silverado will this trip my security?
I have a 2000 Sierra 1500, just got a cluster from a 2500, i did the same swap you did, but mine is dead no power or signal to the gauge itself. the motor itself works but for some reason i'm not getting power or signal to the gauge. is there anything else you did? Fuse? Sensor? Thanks
@eddiereichel9354
5 жыл бұрын
There is a ground wire on back of passenger side head
@justindelgado6313
3 жыл бұрын
Can you specify? I have the same issue, 2 of the gauges aren’t working. Where is the ground wire exactly
How much did they charge you to reset the miles I called they want 175
@mjmcomputers
5 жыл бұрын
I don't recall, I think it was over $100 maybe $125?
Would this cluster with the message center and trans temp fit a 06 silverado ?
@mjmcomputers
Жыл бұрын
No it will not.
Did the mileage reading change after the swap? Is the new cluster going to show the original mileage on your truck? I am changing the cluster on my 01 Silverado and need to know if the mileage reading remains or if I need to reset it. Thanks
@mjmcomputers
4 жыл бұрын
The mileage is kept on the cluster. So if you swap the mileage will not be correct. You will need to get the cluster programmed with your mileage.
Are the denali gauges different? I plugged one into my 99 and it started smoking..
@mjmcomputers
4 жыл бұрын
I’m not sure, never tried to swap in a Denali cluster.
@redneckfl1
Жыл бұрын
I put a Denali cluster in my 02 Sierra & it worked fine. Hopefully you found another one, as Denali ones are harder to find.
@redneckfl1
Жыл бұрын
@@mjmcomputers It’s the same as the 2500HD cluster, except the speedometer goes to 120 & the needles are white.
How much is to program your current mileage
@mjmcomputers
6 жыл бұрын
You will need to find someone in your area who can do it. It was a few years ago so I don’t recall the price.
What year did the cluster come from I got a 01 Tahoe I want the trans temp
@mjmcomputers
7 жыл бұрын
+mike baker if I recall it was a 2000 2500 chevy truck.
@mikebaker9313
7 жыл бұрын
mjmcomputers so if I find a 01 with trans temp it will work
@illduitmyself
7 жыл бұрын
99-03 should work
@Titian92
6 жыл бұрын
I did the same for my 01 Silverado. You will need to get one for a 01 or 02 Silverado HD or Yukon or Escalade to work with your application 03 and newer will not work because the harness changed.
@Titian92
5 жыл бұрын
mike baker 99 Silverado’s have to use clusters from 99 HD trucks only. Cluster from 2000 to 2002 will not work properly, air bag light and abs light will stay on. I had to find a cluster from a 99 Hd .
Did the mileage reading change or remained the same?
@mjmcomputers
4 жыл бұрын
The mileage stays with the cluster. You need to get the cluster programmed with your mileage.
Can you add this cluster to a 4.3 v6 truck?
@mjmcomputers
4 жыл бұрын
never tried , you would need to research or just try it. If I had to guess I would guess it would work.
@TaylorMadejdm1975
4 жыл бұрын
that's what I was thinking too I thought somehow the computer told the gauge cluster what to read therefore not really mattering whether it was a v6 or V8 cuz I would love to have the hundred and twenty mile per hour speed o and the transmission temp gauge is a plus. And they just look better than the OEM gauges... Thanks for your input I'll give it a try 👍
@allanb3222
4 жыл бұрын
Yes it will work, I've used an Escalade cluster on my v6.👍
Wonder why Chevy just didn't put this in all the trims
@mjmcomputers
2 жыл бұрын
I wish they would have.
was yours a 1500
@mjmcomputers
7 жыл бұрын
yes
@when8138
7 жыл бұрын
did you need to add a transmission cooler ? or sensors ? or the only thing that needed to be change was the cluster ? everything comes oem on truck.. i have a 2001 silverado and i want to add a temp gauge
just did this swap on my 01 gmc sierra. everything works the same except when i turn on my cargo light the message center displays hi-beam out. wondering if anyone else has the same effect from this swap.not really a problem just weird
@mjmcomputers
5 жыл бұрын
Did the cluster come from an 01?
@codemanz191
5 жыл бұрын
@@mjmcomputers its between 00 and 02 not sure the exact year
@mjmcomputers
5 жыл бұрын
Not sure what the issue could be. If you plug your old cluster back In It works fine?
@codemanz191
5 жыл бұрын
@@mjmcomputers yep, i also plugged a snap on scanner up and commanded the instrument cluster to display cargo light and it will still say hi- beam out. Everything works right just displays wrong message lol
Just fyi if you get the cluster from a 2500 series and put it into a 1500 series the speedo is off by 10mph you will be going at 55 but doing 65 just fyi..
@mjmcomputers
3 жыл бұрын
Mine was correct afterwards.
@justinstandifer604
2 жыл бұрын
That’s why I go for the Denali ones.
Unhook battery