The most simple yet most effective swing among them in my judgement. Simply the best...

The bumper turned out really nice! The fold down table adds a lot of flat space.

@OverlandUnderBudget

3 жыл бұрын

Thanks mark!

Awesome build! Love that swingout!

Absolutely awesome build.

Amazing job

Can’t wait to get one of these in a 2nd gen! Great build.

@OverlandUnderBudget

4 жыл бұрын

Awesome! Thank you!

Really like this. Looking at ideas for my dodge.

Great build

Freaking awesome man! I just bought my in laws 01 Tacoma and I’ve been watching your videos for a while now and I’m pumped to try this out🤘🏼

@OverlandUnderBudget

4 жыл бұрын

sweet! your going to love it. One of my favorite additions to the truck

Video is very thorough and well done

Nice setup! Getting ready to do a similar design on my Bronco. Great video, thanks.

@OverlandUnderBudget

3 жыл бұрын

Sweet glad you liked it, what year bronco?!

I like your videos man I made a bumper using your how to video it took me like 3 weeks lol instead of your pelican case I made a honda generator carrier an a hi-lift jack and a storage box where you got your tire ..where ever I go a get so many compliments about the bumper my total cost was 350 totally worth it love it thank goodness for your videos 😁 ps im going to build rock slider like the ones your truck has that's goin to be my winter project

I love this rear bumper. I need to do something like this to my 1st gen. 🍻

@OverlandUnderBudget

4 жыл бұрын

Go for it! its one of my favorite changes

Solid build 👍

@OverlandUnderBudget

4 жыл бұрын

thank you!

That’s awesome man! I plan on building that exact same setup for my toyota!

@OverlandUnderBudget

4 жыл бұрын

Right on!

This is awesome...👍

@OverlandUnderBudget

4 жыл бұрын

Thanks man! I really like how it turned out

Love the steeleys That's what I have on mine It floors me to see what people spend on wheels lol . I would have to refinance my truck

Super nice👍

Dude...excellent bumper...

@OverlandUnderBudget

4 жыл бұрын

Thank you!

Now I want to build one for the van

@OverlandUnderBudget

4 жыл бұрын

dude that would sick!

Really nice build on the swing out mount do you have a vid showing how you put it together with welding it?

This is cool, Wish i new what i was doing lol.

Nice . Going to do one for my 95 ram , I have q bit of a different idea .

Well done Sir

@OverlandUnderBudget

3 жыл бұрын

Thank you!

@OverlandUnderBudget

3 жыл бұрын

Thank you!

Hey this is a little off topic but i really like the black steel wheel look u have on ur truck. Are u able to get those rims with a little more offset than stock rims? They look like they poke out a little more than stock. Looks great

Great video! What latch are you running on it?

Did you Make the rear bumper or did you buy it and weld the hinge onto it?

Built this same bumper with same hinge. Not close to 200$ lol. The 3x5 - 6’ was $156. The hinge is 140$. The latch is 50$. I paid 20 for the Cadd files for the bumper mount and I was given the steel and had them laser cut for free. Otherwise that’s 120$. The receiver extension which I welded in the center of the bumper was 21$. I also bought 48” of 1/4” flat stock, 3” wide for end caps, and support gussets. I have not purchased the steel for the swing out. That will be another 120-140$

Went to the 4X website. Beyond reasonable pricing. I do wish they offered a rear hitch bumper for my 92 though.

@frankfontaine9974

Жыл бұрын

Not sure if this helps, but I checked the website and they do happen to offer a rear hitch bumper for a 92 4runner, i believe it should meet similar, if not exact requirements for a 92 pickup

all your builds are right up my Alley, I would love t meet up with you some time. Awesome job. message me when you get a chance

How much play is there with the swing arm out and the pin popped in place? I'm thinking about something like this for a drill press, but want the arm to be locked in place well when swung out.....

💪🏻

With a bumper like this where could you put a rear camera?

Nice work! Do you have a DIY of rear steel bumper? Thanks!

@OverlandUnderBudget

3 жыл бұрын

Yes! Just posted the 1st of a 3 part build series! check it out

I'm doing about the same design on my '94 except I'm putting a ladder where you have your orange box. Have you thought about doing that?

@OverlandUnderBudget

4 жыл бұрын

oh thats a cool idea. For me i can stand on the rear tires, or sliders and access just about everything.

Nice build. I didn't see a latch on the fold down table. What holds it in the up position?

@OverlandUnderBudget

3 жыл бұрын

Thanks! It’s actually a strong magnet that holds it in place once vertical

how much would you charge to do this for my trailblazer and to carry two jerry cans

Hey may I recently bought a camper do you recommend to put plywood or a metal bar so the clamps could secured better the camper shell

@OverlandUnderBudget

4 жыл бұрын

to add the clamping surface? send me a message and photo on instagram and ill try and help. instagram @overlandunderbudget

That’s my next purchase. My All-pro Apex front bumper was suppose to be delivered today but no show. Kudos to you sir! Looks like you paid $1500 for it! 😊👍🏻

@OverlandUnderBudget

4 жыл бұрын

Dang i hate when stuff doesn't show up on a friday and thanks man i really like how it turned out.

👍👍👍👍💪💪💪💪😎Toyota

Is the receiver(tow) hitch part of the bumper or a separate bolt on?

@OverlandUnderBudget

4 жыл бұрын

Its part of the bumper

Is it me or is this audio super low? The swingout is great though!

Whered you get the lid organizer for the chow pelican 1600?

@OverlandUnderBudget

3 жыл бұрын

Came with them when I got them used. I think they are pelican

How wide and thick is your main bumper piece? Like 6inx4in? And probably 3/8 thick metal?

@OverlandUnderBudget

4 жыл бұрын

exactly my man!

Do you have the dimensions of everything?

Any idea on how much it weighs? Without the tire and full case. Just the bumper and swingout.

@OverlandUnderBudget

4 жыл бұрын

You know what i dont, im going to pull it off and paint it properly soon and ill weigh it

@MadjikMan56

4 жыл бұрын

@@OverlandUnderBudget That'd be great. My friend and I are going to build a swing out for my 04. DC. But I like the minimalist look and practicality. Trying to keep the weight down while not compromising functionality. Been digging your videos. Came across your instagram when someone posted it on TW. Been scrolling through and watching. everything.

Noice

What was the cost to build this your self looks great

@OverlandUnderBudget

4 жыл бұрын

10ft of 2x3 tubing $70?, 1- 4x innovations hinge $120

@Jorge86924

4 жыл бұрын

@@OverlandUnderBudget nice 👌 👍 👏 thanks for getting back at me

what kind of rims do you use on your tacoma?

@solosaga5091

3 жыл бұрын

In another video (the rig walk around one, I think), he says they're the steelies that normally mount the spare tire.

@ninjadarookie

3 жыл бұрын

@@solosaga5091 i was thinking of steel, but theyre so heavy, i dont know why people do it

@solosaga5091

3 жыл бұрын

@@ninjadarookie Field repair is the biggest benefit of steel vs alloy. Steel dents, and can be pounded out. Aluminum alloy is typically not as forgiving, especially in the middle of nowhere. You're right about weight. Especially being rotational and unsprung. But, I don't think the difference is significant enough on a slow going trail rig to outweigh the benefit of steel. But, if someone is planning to bomb through the desert at 60mph+, or is a frequent highway cruiser, alloy wheels begin to make more sense.

Really like your rig. What bumper do you have on it?

@OverlandUnderBudget

4 жыл бұрын

The rear bumper lower was made by a company that is no longer in business. I got it off craigslist for $350! it was made by "stout equipment manufactures"

Perhaps you could turn up your volume... I'm watching on an iPad on full volume and I can't hear you... so I either listen to the speakers or I watch.... but I can't do both at the same time!

The most irreplaceable part of any SUV, particularly Toyotas, is the rear hatch/door. A bumper should protect that from rear impacts, putting a tire there destroys the doors in even a slow speed impact. Not a good idea.

FYI, this isn’t a first gen. I owned a 1995.5 Tacoma that had a different body style. That was the first gen production.

@OverlandUnderBudget

3 жыл бұрын

ohhhh you should let the rest of the world know then. I think they might have categorized it.. : )