HELP! It says No Hardware detected... my controller is plugged and registered but I can't Redeem Software... for no reason at all...
@cedricjamesjr13 сағат бұрын
I am getting the same thing.... it is hooked up to the laptop. WTH any help would be appreciated.
@drydessert4198Күн бұрын
The activation number I received to activate my license is not accepted on your website. Tech support ignores my requests. I cannot recommend buying AIR plugins to anyone.
@maxwolfe71942 күн бұрын
No sign of the M-Audio oxygen MKV preset management editor
@UtwoBed2 күн бұрын
Not really so advanced. They did not provide for simultaneous multitrack recording of the individual drum channels. This is a big let down. The only way to mutitrack is through the use of MIDI and then assign samples, but you can do that with any module so this is not at all unique. I'll stick with my Roland set.
@timtheenchanter6855Күн бұрын
Found the Roland fan girl...
@UtwoBedКүн бұрын
@@timtheenchanter6855 Tim the troll shoots off his big mouth. You can always tell who the trolls are because their channels never have any content.
@testifyprod3 күн бұрын
do u need speakers or headphones? i’m say here trying to use my dj2go2 touch but there’s literally no sound coming from my laptop or controller
@inMusicBrandsSupport3 күн бұрын
Hey there! Serato DJ Lite will automatically send its audio output to the DJ2GO2 Touch's MAIN output, to which you can connect an external speaker. If you want to use your computer's sound card instead, open the Serato DJ Lite settings menu (the ⚙️ icon in the top right), click on the "Audio" tab, and click the checkbox next to "Use laptop speakers."
@testifyprod3 күн бұрын
@@inMusicBrandsSupport i’ve checked. this is already running but my sound is still not working at all
@scalgbra3 күн бұрын
Purchased soft clipper no way to apply to standalone
@jaymaltais4054 күн бұрын
I dont see soft clipper it in the activation section. I want it in standalone.
@CarrotCannon4 күн бұрын
LOC set off, GM set on. New short high quality cable(3 different cables. Reset program after changing to loc off, downloaded/install ASIO4ALL. Probably forgot a few but ive tried LITERALLY EVERY FIX and it just will not send anything to my computer. Ive tried BFD, reaper, various daws, ez drummer, works with NON of them. Can someone please answer if you NEED usb 2.0 ports and if thats my issue, at this point i feel like im going insane, this thing is brand new and i have a very capable pc also. Doesnt make sense that its not working unless the unit is just faulty.
@heidyheath61575 күн бұрын
What cable do I buy to connect two of this speakers together
@PaulHaley-o7n5 күн бұрын
At 8.38. Ive pressed the B button but only have the demos. No drum kits in there?
@PaulHaley-o7n5 күн бұрын
At 8.38. Ive pressed the B button but only have the demos. No drum kits in there?
@kpckpc95046 күн бұрын
How do you select a different expansion ?
@kpckpc95046 күн бұрын
All it says I can choose is the mpc beats demos and templates
@kpckpc95046 күн бұрын
The plugin is activated and I can use it when connected to the mpc software but it doesnt show up on the list of plugins to choose from it just let's me choose demos and templates
@lennyjg89687 күн бұрын
the setup wizard did not come up at all, i have to manually download all of my software i guess... lol
@stephenwenzl7 күн бұрын
I just got an Alto TS410 and the Sig/Limit is on showing orange even when I have nothing connected, when I connect via Bluetooth, it remains on even at low volumes and the audio will switch from being clear to sounding like you’re hearing it underwater. Any suggestions as to how I can fix this, thanks!
@ejmallari63958 күн бұрын
I can’t put it together
@emilioaee119 күн бұрын
i need to install everything on my D disk and not in my C disk and is not letting me, even when i put all the links to a folder in my D disk is not working and the InMusic app install everything in my C disk, i cannot find a solution pls reply. And why the InMusic app installed automatically and doesn't let me choose where i wanna install it? it doesn''t make any sense, pls fix this
@rezhawahyufahrozy12 күн бұрын
i'm using M Track solo, noise in garageband, Mac M1 how do i fix it?
@danigarciagiron12 күн бұрын
The download link has a 403 forbidden error and can't download the drivers.
@pedrolantyer14 күн бұрын
If anyone else is having issues with the interface automatically defaulting to 44100Hz 32Bit Input and 48000Hz 32Bit Output, here's a workaround that you can use to prevent the interface resetting back to default settings: Just keep the Windows Sound tab open, to make it clear so no one gets confused, it's the tab that will show up with a cog item in your task bar, and has the header "System > Audio" (Windows 11). Doing so prevents the interface from switching back to default, set both input and output to 48000Hz 16Bit, and keep the tab open. You can alt+tab out of the sound tab, but do not close it otherwise your interface goes back to default settings. Keep in mind, this is only a workaround, you will have to do this every time you wanna use the inferface. This is a driver issue, and judging by the fact that M-Audio hasn't updated the drivers for this thing ever since 2021, do not expect this to be fixed. On the long run, do yourself a favor and buy a Focusrite Scarlett 2i2 4th gen, or a Scarlett Solo 4th gen
@navinamusic14 күн бұрын
Lifesaver, thank you
@a.b167015 күн бұрын
Vielen vielen Dank für diese Video Reihe. Genau das richtige für Anfänger wie mich. Eigentlich wollte ich das Ding schon zurück schicken, weil ich absolut keine Idee hatte, wie ich starten soll. Nun werde ich es behalten und von deinen Videos lernen. Vielen Dank und schöne Grüße aus Deutschland
@Jhiido15 күн бұрын
WHY IS THERE NO NATURAL (NORMAL) MINOR SCALE??? This is so frustrating.
@AnomieDomine18 күн бұрын
But why? Just for mpc hardware integration?
@robinverheyden517818 күн бұрын
I cannot get this speaker to work without using the app! Which sucks, because if I’m trying to stream karaoke off of KZread, and I need to adjust some thing in the ion app, it stops the you tube. How do I make this speaker work without the app??
@scottpapineau166118 күн бұрын
Always says I don’t have enough memory on a brand new kit
@RevJock18 күн бұрын
After reading the comments here I was absolutely terrified to attempt this and yes it does seem an incredibly complex way of doing something relatively straightforward, but somehow I managed to do it😊
@pierrebabeck829419 күн бұрын
ist das umständlich ...
@pukkademps19 күн бұрын
This is a really good video. Thank you.
@nateh.441419 күн бұрын
Followed steps in this video. Double checked it all. It doesn't work. I selected loc off and nothing. The pc shows the nitro max set as connected. There's nothing in this video that says if any additional steps are needed on the module side..
@jutjub2220 күн бұрын
3:00 I think that is wrong, softer side of the beater should make contact with kick pad to prevent damage. no trigger issues at all. Can you give more info how tight should mash heads be, Should it be possible to press in center little bit, or to be tighter?
@MichaelDaniels20 күн бұрын
Can we change the rim sound for each Tom? Example Tom 3 make cow bell then Tom 2 have it be a high cymbal sound like if you were to hit on a real cymbal near the middle. Thanks
@user-ds7xn8jk2c21 күн бұрын
Where are all of the samples/sounds that come with the MPC 2 software? I can't figure out how to get a hold of them. EDIT... Sorry, I jumped the gun. This ilok and inmusic stuff is all new to me. I had a studio back in the day and it wasn't as complicated as the one+. Stoked to get back and rolling. I just had to watch the video LOL.
@okayvbeats23 күн бұрын
Damn why the background music go so hard.. I had to rewatch this 7 times
@christophermyers886923 күн бұрын
I see that it’s programmed the channel and number saved but it doesn’t play what i programmed it to. It changes with whatever program I’m using. Am i missing something?
@NikoWax23 күн бұрын
The felt side feels so much better so it's not an issue... If I have to buy a new head at around 30 euro in 2 years... so be it. The plastic side feels very strange.
@carlosherrera584324 күн бұрын
Not rechargeable right?
@naramizda307819 күн бұрын
Only the power glow 300.
@senimanmahiwal25 күн бұрын
I owned M-Track Solo, and when I plugged in my PC on Win10, it always detect as USB AUDIO CODEC. And when I install the M-Track Solo and Duo 1.0.3 driver, it cannot install, the Setup Wizard not showing, and always have Microsoft Visual C++ 2012 Redistributable pop-up 2 times, and then it quits. When I runned my DAW (Studio One), its show NO AUDIO DRIVER. any help ???
@totallyfrozen25 күн бұрын
inMusic has atrocious customer service. I don’t know if they think they’re smarter than everybody else, but whether you’re patient with them or not-they’ll lie to you. Repeatedly. Alesis used to be a good brand. I’ve owned Alesis gear since the HR:16 drum machine. The nitro max kit is my LAST Alesis purchase ever. It’s no surprise this video is barely useful. Buyer be ware.
@michaelpattison378626 күн бұрын
THANK YOU!!! What a perfect tutorial video!
@lyricsmatter_University26 күн бұрын
Might Be My Last Product From PULG IN Boutique, It’s Always Hours Of Technical Difficulty Just To Download A Product.
@Vinicius-bk2zo26 күн бұрын
thank you!!!
@FLAMEREEPER2526 күн бұрын
Akai is such a headache. I got my MPC professional 11 years ago and there were so many issues with either the serial number, or using the MPC application and I contacted them for help and they never got back to me and I was never able to use it until today and there were still issues with the MPC application and not having any samples in it so I can’t even use it still. After 11 years!!!!!
@karinanurlankyzy11427 күн бұрын
My strands can’t reach the support bars it’s too far apart
@kub778127 күн бұрын
How to get your Revalver amp models into your Headrush Hardware?
@pabloleban29 күн бұрын
I'm having issues with the module as well. I can only play the default kit. If I switch to any other one, like the Binary Cleanse, it lasts only 30 seconds until I get a "Internal error" message. I don't know how this module got approved by the QA team.
@kuandemarco5498Ай бұрын
My mpc 2 software doesn’t work properly with FL studio after I upgraded to the latest version on FL 21. My mpc beats is working but I’m missing the amount of audio tracks and and my mpc plugins
@aloysiusgreenthumb8166Ай бұрын
Revalver does not even recognize my USB devices when I plug them in so this is dead in the water.
@yuukithetanuuki7937Ай бұрын
God Bless You All and Thank you
@AlexGParkАй бұрын
How do I reset the bluetooth connection? my bluetooth light stays on and it is not discoverable by new device.
@inMusicBrandsSupportАй бұрын
Hello Alex - press & hold the Bluetooth button for a few seconds to disconnect a paired device. The Bluetooth button LED will change from solid to flashing after the module re-enters pairing mode. Check out page 23 of the Nitro Max user guide for more details! You can find the link to the user guide in the description of this video.
@AlexGPark29 күн бұрын
@@inMusicBrandsSupport thank you so much! You are amazing
@MrcarlvercettyАй бұрын
after installation and activation I cannot find JURA anywhere in MPC software
Пікірлер
HELP! It says No Hardware detected... my controller is plugged and registered but I can't Redeem Software... for no reason at all...
I am getting the same thing.... it is hooked up to the laptop. WTH any help would be appreciated.
The activation number I received to activate my license is not accepted on your website. Tech support ignores my requests. I cannot recommend buying AIR plugins to anyone.
No sign of the M-Audio oxygen MKV preset management editor
Not really so advanced. They did not provide for simultaneous multitrack recording of the individual drum channels. This is a big let down. The only way to mutitrack is through the use of MIDI and then assign samples, but you can do that with any module so this is not at all unique. I'll stick with my Roland set.
Found the Roland fan girl...
@@timtheenchanter6855 Tim the troll shoots off his big mouth. You can always tell who the trolls are because their channels never have any content.
do u need speakers or headphones? i’m say here trying to use my dj2go2 touch but there’s literally no sound coming from my laptop or controller
Hey there! Serato DJ Lite will automatically send its audio output to the DJ2GO2 Touch's MAIN output, to which you can connect an external speaker. If you want to use your computer's sound card instead, open the Serato DJ Lite settings menu (the ⚙️ icon in the top right), click on the "Audio" tab, and click the checkbox next to "Use laptop speakers."
@@inMusicBrandsSupport i’ve checked. this is already running but my sound is still not working at all
Purchased soft clipper no way to apply to standalone
I dont see soft clipper it in the activation section. I want it in standalone.
LOC set off, GM set on. New short high quality cable(3 different cables. Reset program after changing to loc off, downloaded/install ASIO4ALL. Probably forgot a few but ive tried LITERALLY EVERY FIX and it just will not send anything to my computer. Ive tried BFD, reaper, various daws, ez drummer, works with NON of them. Can someone please answer if you NEED usb 2.0 ports and if thats my issue, at this point i feel like im going insane, this thing is brand new and i have a very capable pc also. Doesnt make sense that its not working unless the unit is just faulty.
What cable do I buy to connect two of this speakers together
At 8.38. Ive pressed the B button but only have the demos. No drum kits in there?
At 8.38. Ive pressed the B button but only have the demos. No drum kits in there?
How do you select a different expansion ?
All it says I can choose is the mpc beats demos and templates
The plugin is activated and I can use it when connected to the mpc software but it doesnt show up on the list of plugins to choose from it just let's me choose demos and templates
the setup wizard did not come up at all, i have to manually download all of my software i guess... lol
I just got an Alto TS410 and the Sig/Limit is on showing orange even when I have nothing connected, when I connect via Bluetooth, it remains on even at low volumes and the audio will switch from being clear to sounding like you’re hearing it underwater. Any suggestions as to how I can fix this, thanks!
I can’t put it together
i need to install everything on my D disk and not in my C disk and is not letting me, even when i put all the links to a folder in my D disk is not working and the InMusic app install everything in my C disk, i cannot find a solution pls reply. And why the InMusic app installed automatically and doesn't let me choose where i wanna install it? it doesn''t make any sense, pls fix this
i'm using M Track solo, noise in garageband, Mac M1 how do i fix it?
The download link has a 403 forbidden error and can't download the drivers.
If anyone else is having issues with the interface automatically defaulting to 44100Hz 32Bit Input and 48000Hz 32Bit Output, here's a workaround that you can use to prevent the interface resetting back to default settings: Just keep the Windows Sound tab open, to make it clear so no one gets confused, it's the tab that will show up with a cog item in your task bar, and has the header "System > Audio" (Windows 11). Doing so prevents the interface from switching back to default, set both input and output to 48000Hz 16Bit, and keep the tab open. You can alt+tab out of the sound tab, but do not close it otherwise your interface goes back to default settings. Keep in mind, this is only a workaround, you will have to do this every time you wanna use the inferface. This is a driver issue, and judging by the fact that M-Audio hasn't updated the drivers for this thing ever since 2021, do not expect this to be fixed. On the long run, do yourself a favor and buy a Focusrite Scarlett 2i2 4th gen, or a Scarlett Solo 4th gen
Lifesaver, thank you
Vielen vielen Dank für diese Video Reihe. Genau das richtige für Anfänger wie mich. Eigentlich wollte ich das Ding schon zurück schicken, weil ich absolut keine Idee hatte, wie ich starten soll. Nun werde ich es behalten und von deinen Videos lernen. Vielen Dank und schöne Grüße aus Deutschland
WHY IS THERE NO NATURAL (NORMAL) MINOR SCALE??? This is so frustrating.
But why? Just for mpc hardware integration?
I cannot get this speaker to work without using the app! Which sucks, because if I’m trying to stream karaoke off of KZread, and I need to adjust some thing in the ion app, it stops the you tube. How do I make this speaker work without the app??
Always says I don’t have enough memory on a brand new kit
After reading the comments here I was absolutely terrified to attempt this and yes it does seem an incredibly complex way of doing something relatively straightforward, but somehow I managed to do it😊
ist das umständlich ...
This is a really good video. Thank you.
Followed steps in this video. Double checked it all. It doesn't work. I selected loc off and nothing. The pc shows the nitro max set as connected. There's nothing in this video that says if any additional steps are needed on the module side..
3:00 I think that is wrong, softer side of the beater should make contact with kick pad to prevent damage. no trigger issues at all. Can you give more info how tight should mash heads be, Should it be possible to press in center little bit, or to be tighter?
Can we change the rim sound for each Tom? Example Tom 3 make cow bell then Tom 2 have it be a high cymbal sound like if you were to hit on a real cymbal near the middle. Thanks
Where are all of the samples/sounds that come with the MPC 2 software? I can't figure out how to get a hold of them. EDIT... Sorry, I jumped the gun. This ilok and inmusic stuff is all new to me. I had a studio back in the day and it wasn't as complicated as the one+. Stoked to get back and rolling. I just had to watch the video LOL.
Damn why the background music go so hard.. I had to rewatch this 7 times
I see that it’s programmed the channel and number saved but it doesn’t play what i programmed it to. It changes with whatever program I’m using. Am i missing something?
The felt side feels so much better so it's not an issue... If I have to buy a new head at around 30 euro in 2 years... so be it. The plastic side feels very strange.
Not rechargeable right?
Only the power glow 300.
I owned M-Track Solo, and when I plugged in my PC on Win10, it always detect as USB AUDIO CODEC. And when I install the M-Track Solo and Duo 1.0.3 driver, it cannot install, the Setup Wizard not showing, and always have Microsoft Visual C++ 2012 Redistributable pop-up 2 times, and then it quits. When I runned my DAW (Studio One), its show NO AUDIO DRIVER. any help ???
inMusic has atrocious customer service. I don’t know if they think they’re smarter than everybody else, but whether you’re patient with them or not-they’ll lie to you. Repeatedly. Alesis used to be a good brand. I’ve owned Alesis gear since the HR:16 drum machine. The nitro max kit is my LAST Alesis purchase ever. It’s no surprise this video is barely useful. Buyer be ware.
THANK YOU!!! What a perfect tutorial video!
Might Be My Last Product From PULG IN Boutique, It’s Always Hours Of Technical Difficulty Just To Download A Product.
thank you!!!
Akai is such a headache. I got my MPC professional 11 years ago and there were so many issues with either the serial number, or using the MPC application and I contacted them for help and they never got back to me and I was never able to use it until today and there were still issues with the MPC application and not having any samples in it so I can’t even use it still. After 11 years!!!!!
My strands can’t reach the support bars it’s too far apart
How to get your Revalver amp models into your Headrush Hardware?
I'm having issues with the module as well. I can only play the default kit. If I switch to any other one, like the Binary Cleanse, it lasts only 30 seconds until I get a "Internal error" message. I don't know how this module got approved by the QA team.
My mpc 2 software doesn’t work properly with FL studio after I upgraded to the latest version on FL 21. My mpc beats is working but I’m missing the amount of audio tracks and and my mpc plugins
Revalver does not even recognize my USB devices when I plug them in so this is dead in the water.
God Bless You All and Thank you
How do I reset the bluetooth connection? my bluetooth light stays on and it is not discoverable by new device.
Hello Alex - press & hold the Bluetooth button for a few seconds to disconnect a paired device. The Bluetooth button LED will change from solid to flashing after the module re-enters pairing mode. Check out page 23 of the Nitro Max user guide for more details! You can find the link to the user guide in the description of this video.
@@inMusicBrandsSupport thank you so much! You are amazing
after installation and activation I cannot find JURA anywhere in MPC software