Please, put de links abouts elements from project, greatings from Colombia
@BigKidToys4 ай бұрын
It’s a long shot but would you be willing to weld a set of Mine if I mailed them to you? Thanks boss
@daveprototype60794 ай бұрын
Sure Im located in ontario canada
@timmer9lives5 ай бұрын
Well Done. I really like it.
@neilforell19265 ай бұрын
Where did you get those metal gears from?
@daveprototype60795 ай бұрын
MLToys.com
@timothypifer48367 ай бұрын
Would you be able to tell where you got the parts to make the new shaft? I’m running into the same problem 🤦🏼♂️
@hawkvenomgaming8 ай бұрын
Where to get these metal Gears 😢 please provide any links ❤
@daveprototype60798 ай бұрын
MLtoys.com
@utieu27899 ай бұрын
Husqvarna 575 ben do gia bao nhieu tien vay chu
@blainemcdonald697210 ай бұрын
Did you torque everything down to spec? Didn’t see you with one.
@daveprototype607910 ай бұрын
Yes, next time I will make sure to put that in the video
@mhildack10 ай бұрын
What?! No wrench sizes or any other info to get prepared?! 👎
@daveprototype607910 ай бұрын
Sorry we are getting better at giving more info, thanks for telling us. For sure in the next one we will mention it or put it in the comments.
@tomwilhelm6711 ай бұрын
Would you happen to have a drawing available for this build? Trying to do something similar.
@bonnersbest111 ай бұрын
Hi Dave, Great video. You stated the clutch cover is stuck on there (8:05) but then video skips ahead to clutch cover just being pulled off and mentioned using pliers and a little wiggling to get it free. I'm having a hard time getting cover off my 570 as well. Is it threaded on there? or, does it just slip on? How did you use pliers to get it free? Did you turn or just pull and wiggle?
@spins8085 Жыл бұрын
How long did this set up last. Stage 1 or 2 cost a pretty penny.
@thebluecollarwelder Жыл бұрын
I will say this I bought this little welder a week ago and there is something about the Arc and bead appearance on stick that I have never seen on Machines costing 10 times more. Haven't tig with it yet so no comment on that yet
@johnranalletta9249 Жыл бұрын
Where did you get the torch with gas quick connect? Thanks.
@dirtboy182 Жыл бұрын
Where did you order that gear? I’m trying to make my nieces 4wheeler go fast.
@daveprototype6079 Жыл бұрын
ML toys on line
@user-kf8ry8qr9h Жыл бұрын
great video, Thank you, My question is, I have never seen a steel lower control arm it looked and sounded cheap too me, Dont take that in a defensive matter, Usually they arealuminum cast. Is the steal part a cheaper alternative then the aluminum? I know alot of these car parts are china made and we are stuck with them and alot are cheaply made anymore, I was told that by alot of mechanics, Thank you
@daveprototype6079 Жыл бұрын
Thats the one they brought it probably was the cheaper one as they were on a budget
@blainemcdonald697210 ай бұрын
The use of these cheap parts by GM is why most people are now buying Japanese vehicles.
@daveprototype607910 ай бұрын
Yes parts are not very good these days
@maryphoenix3661 Жыл бұрын
What a big job. Save a lot of money by doing it yourself.
@maryphoenix3661 Жыл бұрын
Wow. Cuts through hardwood like butter!!!!
@daveprototype6079 Жыл бұрын
Thanks for watching Like, comment Subscribe
@maryphoenix3661 Жыл бұрын
Do you always need two?
@maryphoenix3661 Жыл бұрын
The trailer really needed repair.
@daveprototype6079 Жыл бұрын
Yes big fines it MTO pulled them over
@stantherealtor5452 Жыл бұрын
Did it make it easyer to load other bucket into it?
@stantherealtor5452 Жыл бұрын
How hard was it to clean and sharpen the saw?
@maryphoenix3661 Жыл бұрын
This demonstration can save a lot of money. It’s a big job.
@maryphoenix3661 Жыл бұрын
Doing regular maintenance keeps vehicles running efficiently. Thanks for posting.
@maryphoenix3661 Жыл бұрын
The kids are going to enjoy riding.
@DaveWelder Жыл бұрын
More coils makes more heat also.
@DaveWelder Жыл бұрын
that is a nice dozer, they are so reliable
@DaveWelder Жыл бұрын
husqvarna makes nice chainsaws
@DaveWelder Жыл бұрын
That is an old machine, looks like its in good shape
@DaveWelder Жыл бұрын
those are big bolts for the main support
@DaveWelder Жыл бұрын
my Samsung took a craper too
@DaveWelder Жыл бұрын
Brakes are expensive , nice wrok
@DaveWelder Жыл бұрын
That is a full service all right, I need to get one done to my truck
@DaveWelder Жыл бұрын
Burn them off the rims,,, Tires must be cheap where do you get them?
@DaveWelder Жыл бұрын
Nice machine, looks fast
@DaveWelder Жыл бұрын
This saw is great, very comfortable to use...
@DaveWelder Жыл бұрын
These are good, I got one works mint.....
@maryphoenix3661 Жыл бұрын
A lot of work but will save time in the long run.
@maryphoenix3661 Жыл бұрын
This demonstration can save a lot of money. Thanks.😊
@maryphoenix3661 Жыл бұрын
Great tips to keep you saw working efficiently.😊
@daveprototype6079 Жыл бұрын
Thanks for watching
@DaveWelder Жыл бұрын
That would make a nice fireplace mantel Great Video New subscriber
@daveprototype6079 Жыл бұрын
Thanks New videos coming up...
@DaveWelder Жыл бұрын
That is a good job diagnosing the clutch problem... Nice work..
@dchockeyinc Жыл бұрын
Wow, this is a great video, lots of information, thank you for posting.
Пікірлер
Is these parts are available in Flipkart order
Links to what metal gears you ordered, please
Please, put de links abouts elements from project, greatings from Colombia
It’s a long shot but would you be willing to weld a set of Mine if I mailed them to you? Thanks boss
Sure Im located in ontario canada
Well Done. I really like it.
Where did you get those metal gears from?
MLToys.com
Would you be able to tell where you got the parts to make the new shaft? I’m running into the same problem 🤦🏼♂️
Where to get these metal Gears 😢 please provide any links ❤
MLtoys.com
Husqvarna 575 ben do gia bao nhieu tien vay chu
Did you torque everything down to spec? Didn’t see you with one.
Yes, next time I will make sure to put that in the video
What?! No wrench sizes or any other info to get prepared?! 👎
Sorry we are getting better at giving more info, thanks for telling us. For sure in the next one we will mention it or put it in the comments.
Would you happen to have a drawing available for this build? Trying to do something similar.
Hi Dave, Great video. You stated the clutch cover is stuck on there (8:05) but then video skips ahead to clutch cover just being pulled off and mentioned using pliers and a little wiggling to get it free. I'm having a hard time getting cover off my 570 as well. Is it threaded on there? or, does it just slip on? How did you use pliers to get it free? Did you turn or just pull and wiggle?
How long did this set up last. Stage 1 or 2 cost a pretty penny.
I will say this I bought this little welder a week ago and there is something about the Arc and bead appearance on stick that I have never seen on Machines costing 10 times more. Haven't tig with it yet so no comment on that yet
Where did you get the torch with gas quick connect? Thanks.
Where did you order that gear? I’m trying to make my nieces 4wheeler go fast.
ML toys on line
great video, Thank you, My question is, I have never seen a steel lower control arm it looked and sounded cheap too me, Dont take that in a defensive matter, Usually they arealuminum cast. Is the steal part a cheaper alternative then the aluminum? I know alot of these car parts are china made and we are stuck with them and alot are cheaply made anymore, I was told that by alot of mechanics, Thank you
Thats the one they brought it probably was the cheaper one as they were on a budget
The use of these cheap parts by GM is why most people are now buying Japanese vehicles.
Yes parts are not very good these days
What a big job. Save a lot of money by doing it yourself.
Wow. Cuts through hardwood like butter!!!!
Thanks for watching Like, comment Subscribe
Do you always need two?
The trailer really needed repair.
Yes big fines it MTO pulled them over
Did it make it easyer to load other bucket into it?
How hard was it to clean and sharpen the saw?
This demonstration can save a lot of money. It’s a big job.
Doing regular maintenance keeps vehicles running efficiently. Thanks for posting.
The kids are going to enjoy riding.
More coils makes more heat also.
that is a nice dozer, they are so reliable
husqvarna makes nice chainsaws
That is an old machine, looks like its in good shape
those are big bolts for the main support
my Samsung took a craper too
Brakes are expensive , nice wrok
That is a full service all right, I need to get one done to my truck
Burn them off the rims,,, Tires must be cheap where do you get them?
Nice machine, looks fast
This saw is great, very comfortable to use...
These are good, I got one works mint.....
A lot of work but will save time in the long run.
This demonstration can save a lot of money. Thanks.😊
Great tips to keep you saw working efficiently.😊
Thanks for watching
That would make a nice fireplace mantel Great Video New subscriber
Thanks New videos coming up...
That is a good job diagnosing the clutch problem... Nice work..
Wow, this is a great video, lots of information, thank you for posting.
Thanks
Measure twice….cut once. That’s precision work!!!😊
These live edge slabs would make beautiful benches.
Nice job. Great details.
I had mine at closet