Does anyone have problems screwing the hopper into the unit
@blah67219 күн бұрын
today 26/06/2024 i received mine yeah
@MatthesGardens16 күн бұрын
More civil defense lawyer advice to avoid suits from stupid people: use appropriate eye protection when using compressed air to clean the Mill. Love the add on at the end, which was timed perfectly for my concerns as the cleaning section progressed. Got my Mill today!
@dasme867320 күн бұрын
Those red tanks from the hardware store only last me a couple of 5 gallon batches. I oxygenate for 1 minute. Is there an adapter to fit this to a larger oxygen bottle?
@SpikeBrewing8 күн бұрын
Are you using our kit? Our kit with the special flow meter will last you about 200 gallons
@dasme86738 күн бұрын
@@SpikeBrewing not using your kit. It's the oxygenation kit 2.0 and I have no way of knowing the flow rate. I think that may be the problem.
@FU420B23 күн бұрын
Very bad instructions
@mittelfruh15 күн бұрын
?? Would you mind elaborating?
@FU420B23 күн бұрын
Do you have assembly instructions?
@paskrellАй бұрын
EUROPE - WE NEED YOU IN EUROPE. COME ONE AND PLEASE!!!!!! Make it happen.
@paskrellАй бұрын
EUROPE - WE NEED YOU IN EUROPE. COME ONE AND PLEASE!!!!!! Make it happen.
@MATTW3RАй бұрын
how long do you contidion it post 2nd dry hop.
@AmieAbajarАй бұрын
How many days will it lasts?
@PartyTimeBrewingАй бұрын
Appreciate the in depth overview of the mill. Love the insight into the process. And the extreme sport aspect of the video was great (21:07). Cheers!
@billzens36642 ай бұрын
I got the Blichmann about two years ago, and here are my comments about some of your observations. Pricing: As a home brewer, it was more than I wanted to spend, but at the time there was really only the Blichmann and the SS. I didn't want the SS (based on some of the same things and more that you addressed). Drive: I can't comment on the drive system/steel shavings, because I haven't taken the mill apart and have no intention of doing so. Thoughput: I did a test a while back of the throughput (and video'd it) and for me it was about 16 pounds in 1:20, which is roughly on par with your pro system. I will post that to my KZread channel shortly. Weight: The Blichmann is a monster, and I think the motor + mill comes in over 50 pounds. (With the stand, it shipped at about 78 or so pounds), so I think you under-reported that. The thing is tho, with the casters it moves around quite easily, so the weight was not an issue after assembly, and because I can move the mill, it does store in an out of the way spot as well. Its footprint is 24" X 24" (X 38" tall) which was not a problem for me. Gap setting adjustment: When I got mine, it came with a stainless steel plate, and I did not find it difficult or confusing to set up and adjust. Altho I primarily use it on one setting, it is simple to change when I need to. The Spike appears to be a little easier to adjust, but it is not significant. Dust: You are spot on with your comments there. After each milling I actually use my leaf blower to get all the dust off of it, and out of the garage. Looks: Definitely an industrial look, but that doesn't bother me. Some other things you didn't comment on that you should have: Assembly: On my Blichmann, it was very difficult, especially setting up the stand and mounting the mill and hopper to it and getting everything to fit properly. Just a one time deal, but a total PITA, especially compared to what it looks like is an easy assembly on the Spike mill. Noise: I wish you addressed this. I have heard that the SS is VERY loud with a high pitch (and seen videos of it on KZread) and I think it would be nice to know how loud yours is. My Blichmann is very quiet. Gap between rollers different from front to back: There were a couple videos on YT about the gap being different in the rollers on the SS, and I did see one as well about a minor difference on the Blichmann. Mine does not have that issue, but can you comment on that? End game is I love my Blichmann mill, (and am obviously going to keep it) but if the Spike was available when I purchased mine, I would have seriously considered it based on the overall cost for a homebrewing operation.
@darinburke62352 ай бұрын
I want a fitted lid for my new Home version. Any plan on selling one for the home version? What about an extension for the home hopper?
@SpikeBrewing2 ай бұрын
Sorry, what do you mean by fitted lid? No, plans on he hopper extension.
@timheffernan35772 ай бұрын
Looks like the mill I'll be eventually buying
@Hacky24472 ай бұрын
i'm waiting for another preorder list coming available. what's the recommended crush setting for this for a fine crush using a brew bag?
@SpikeBrewing2 ай бұрын
These will be available again tomorrow 👍🏽 we recommend starting with .035” and moving up or down based on your preference.
@NathanKraemer2 ай бұрын
Received mine today and I ran 8 pounds at 1 min 20 sec at a 0.05 setting. Grain crush looks great. What do you guys recommend as a starting setting?
@SpikeBrewing2 ай бұрын
Glad you love it! A good starting point is .035” and you can adjust from there 👍🏽
@NathanKraemer2 ай бұрын
@@SpikeBrewing I am thinking this just might be the best grain mill for a home brewer. Third and final mill.
@kikerikiho2 ай бұрын
capacity for up to 4 fermenters of what size?
@SpikeBrewing2 ай бұрын
Up to (4) 1bbls. More info can be found on our website 👍🏽
@joshuapinter2 ай бұрын
You guys are becoming the Apple of brewing. Love all of your stuff, especially these deep dives, which set you apart and is akin to KegLand. Keep it up!
@SpikeBrewing2 ай бұрын
Appreciate the comment 🍻
@fullmeasureshow2 ай бұрын
I’ve seen some folks concerned if this would cold crash. Let me tell you… that shouldn’t concern you one bit. I go from 67F down to 34F in just a few hours. Crazy efficient.
@SpikeBrewing2 ай бұрын
It’ll cold crash no problem! It’s not of the most powerful chillers on the market so not sure where that concern is coming from.
@bryanapplegate31172 ай бұрын
How do I win?
@dublagemtal50132 ай бұрын
Por que ele usa luvas? Pega em todas as coisas e depois pega no malte com as mesmas luvas
@NathanKraemer3 ай бұрын
I can't wait to enjoy my mill 😊
@NathanKraemer2 ай бұрын
My mill shipped Today, 25 April 2024!
@joshuapinter3 ай бұрын
Great video. High production value. Can’t wait to get one.
@jzlharvey3 ай бұрын
🤡
@ZulysKitchen3 ай бұрын
Yum
@sabelombunye95953 ай бұрын
Make more videos like this, great explanations😊
@rola8007213 ай бұрын
Icemaster 4, has all 4 bombs don't delete my comment, I bought a new one and it has them
@Ryan_Mooney4 ай бұрын
The JaDeD cools very fast if you have a good flow rate with cold tap water, and yeah you need to stir it. It’s kind of unfair to put it against plate and counterflow as it’s an entirely different concept of chilling.
@SpikeBrewing4 ай бұрын
A worse way from our testing...
@CrazyAboutVinylRecords4 ай бұрын
11:32 Ok, but the Spike chiller comes with nothing too. So let's compare apples to apples here. And I would add that the Spike essentials options don't even get the chiller brew ready from what I can tell. OTOH, if you order the Exchillerator with the brew ready option it is good to go out of the box. The Exchillerator Maxx TC Brew Ready option will set you back $384. The Spike chiller with TC and essentials kit is $450 and you still don't have a thermometer.
@SpikeBrewing4 ай бұрын
We just double checked and without fittings (since everyone's setup is different) you're looking at $255 vs $325 for the tri-clamp option. However the Spike chills about 75% quicker and it's just a bunch of Home Depot fittings cobbled together.
@derrijkhollon17974 ай бұрын
When are these going to drop for purchase?
@SpikeBrewing4 ай бұрын
Make sure your on the back in stock email list! We'll be sending out an email on that any day now...
@BertTotzke4 ай бұрын
Hello from a UK home brewer. I must say, I'm a precision engineer (Toolmaker) by trade, and I'm mighty impressed with not only the quality of the system, but also the ingenuity. You seem to have thought of, and come up with an answer for everything. Well done on producing a top quality product...... if I had the room, I'd be seriously thinking about getting one shipped over.
@adamsilver36284 ай бұрын
What coil is that in the fermenter that has a larger TC in the middle?
@UglyDucklingBrewery5 ай бұрын
Looks amazing guys!!!! We already use your pumps on our 12 gallon propane system. It may be time to upgrade our glycol system!!!! We currently use the "competetion's" systems on both our 12 gallon system and our 1bbl herms system
@joshuapinter5 ай бұрын
Love it. These are such great videos. And great to see Caleb showcasing this one. Not only is he your talest team member, but definitely one of your most valuable. Really like what you guys are putting out these days: glycol chiller, grain mill, etc.
@AdamNotThatAdam5 ай бұрын
Can I trade my chiller in for your chiller.
@gerrylynch39915 ай бұрын
One of my pumps went out on my Brubuilt and I was able to get a replacement pretty easy from MoreBeer.
@SpikeBrewing5 ай бұрын
How was the install process?
@douglasfinelli5 ай бұрын
Can't wait to make my purchase!
@Mark_Wood5 ай бұрын
Looks great guys, can't wait for my kickstarter to ship!
@gilleswalther59645 ай бұрын
Great video about this brewing system! It was very informative. Quality stuff over there.
@stevenbeach7485 ай бұрын
Can someone explain to my why this has three tri clamp fittings and one threaded? What sense does that make?
@SpikeBrewing5 ай бұрын
Garden hose inlet for the water
@stevenbeach7485 ай бұрын
Ok, so why a tri clamp for the water outlet and not another garden hose fitting?
@SpikeBrewing5 ай бұрын
@@stevenbeach748 because most people pump the hot water into their kettles for use with cleaning using the TC hoses used with their system.
@kanhavanand5 ай бұрын
To afford this I need more than a dollar 😅
@steffenmuller81785 ай бұрын
Great products. Wish your stuff would be available in Europe.
@suwirwong5 ай бұрын
I am considering buying 2 of these for my brewery , the only question is ,can it use to pump boiling wort? There is no temperature information
@suwirwong5 ай бұрын
I am considering buying 2 of these for my brewery , the only question is ,can it use to pump boiling wort?
@SpikeBrewing5 ай бұрын
Yes, it can!
@Ping_Localh0st1275 ай бұрын
Nice
@cesarv.63655 ай бұрын
This is beginners question. How do you do the carbonation process with cf15 fermenter? I have a batch fermenting at the moment.
@SpikeBrewing5 ай бұрын
Check out this video: kzread.info/dash/bejne/oGqAk5t-adWTZKg.html
@philiscute5 ай бұрын
I am very interested in buying this pump but my only concern is that if it would work with a CIP on a 1BBL fermenter. Would the Spike Flow easily clean a 1BBL fermenter or should I be looking for something bigger?
@SpikeBrewing5 ай бұрын
The Flow used with our CIP ball would work perfectly!
Пікірлер
How can we paticipate
Does anyone have problems screwing the hopper into the unit
today 26/06/2024 i received mine yeah
More civil defense lawyer advice to avoid suits from stupid people: use appropriate eye protection when using compressed air to clean the Mill. Love the add on at the end, which was timed perfectly for my concerns as the cleaning section progressed. Got my Mill today!
Those red tanks from the hardware store only last me a couple of 5 gallon batches. I oxygenate for 1 minute. Is there an adapter to fit this to a larger oxygen bottle?
Are you using our kit? Our kit with the special flow meter will last you about 200 gallons
@@SpikeBrewing not using your kit. It's the oxygenation kit 2.0 and I have no way of knowing the flow rate. I think that may be the problem.
Very bad instructions
?? Would you mind elaborating?
Do you have assembly instructions?
EUROPE - WE NEED YOU IN EUROPE. COME ONE AND PLEASE!!!!!! Make it happen.
EUROPE - WE NEED YOU IN EUROPE. COME ONE AND PLEASE!!!!!! Make it happen.
how long do you contidion it post 2nd dry hop.
How many days will it lasts?
Appreciate the in depth overview of the mill. Love the insight into the process. And the extreme sport aspect of the video was great (21:07). Cheers!
I got the Blichmann about two years ago, and here are my comments about some of your observations. Pricing: As a home brewer, it was more than I wanted to spend, but at the time there was really only the Blichmann and the SS. I didn't want the SS (based on some of the same things and more that you addressed). Drive: I can't comment on the drive system/steel shavings, because I haven't taken the mill apart and have no intention of doing so. Thoughput: I did a test a while back of the throughput (and video'd it) and for me it was about 16 pounds in 1:20, which is roughly on par with your pro system. I will post that to my KZread channel shortly. Weight: The Blichmann is a monster, and I think the motor + mill comes in over 50 pounds. (With the stand, it shipped at about 78 or so pounds), so I think you under-reported that. The thing is tho, with the casters it moves around quite easily, so the weight was not an issue after assembly, and because I can move the mill, it does store in an out of the way spot as well. Its footprint is 24" X 24" (X 38" tall) which was not a problem for me. Gap setting adjustment: When I got mine, it came with a stainless steel plate, and I did not find it difficult or confusing to set up and adjust. Altho I primarily use it on one setting, it is simple to change when I need to. The Spike appears to be a little easier to adjust, but it is not significant. Dust: You are spot on with your comments there. After each milling I actually use my leaf blower to get all the dust off of it, and out of the garage. Looks: Definitely an industrial look, but that doesn't bother me. Some other things you didn't comment on that you should have: Assembly: On my Blichmann, it was very difficult, especially setting up the stand and mounting the mill and hopper to it and getting everything to fit properly. Just a one time deal, but a total PITA, especially compared to what it looks like is an easy assembly on the Spike mill. Noise: I wish you addressed this. I have heard that the SS is VERY loud with a high pitch (and seen videos of it on KZread) and I think it would be nice to know how loud yours is. My Blichmann is very quiet. Gap between rollers different from front to back: There were a couple videos on YT about the gap being different in the rollers on the SS, and I did see one as well about a minor difference on the Blichmann. Mine does not have that issue, but can you comment on that? End game is I love my Blichmann mill, (and am obviously going to keep it) but if the Spike was available when I purchased mine, I would have seriously considered it based on the overall cost for a homebrewing operation.
I want a fitted lid for my new Home version. Any plan on selling one for the home version? What about an extension for the home hopper?
Sorry, what do you mean by fitted lid? No, plans on he hopper extension.
Looks like the mill I'll be eventually buying
i'm waiting for another preorder list coming available. what's the recommended crush setting for this for a fine crush using a brew bag?
These will be available again tomorrow 👍🏽 we recommend starting with .035” and moving up or down based on your preference.
Received mine today and I ran 8 pounds at 1 min 20 sec at a 0.05 setting. Grain crush looks great. What do you guys recommend as a starting setting?
Glad you love it! A good starting point is .035” and you can adjust from there 👍🏽
@@SpikeBrewing I am thinking this just might be the best grain mill for a home brewer. Third and final mill.
capacity for up to 4 fermenters of what size?
Up to (4) 1bbls. More info can be found on our website 👍🏽
You guys are becoming the Apple of brewing. Love all of your stuff, especially these deep dives, which set you apart and is akin to KegLand. Keep it up!
Appreciate the comment 🍻
I’ve seen some folks concerned if this would cold crash. Let me tell you… that shouldn’t concern you one bit. I go from 67F down to 34F in just a few hours. Crazy efficient.
It’ll cold crash no problem! It’s not of the most powerful chillers on the market so not sure where that concern is coming from.
How do I win?
Por que ele usa luvas? Pega em todas as coisas e depois pega no malte com as mesmas luvas
I can't wait to enjoy my mill 😊
My mill shipped Today, 25 April 2024!
Great video. High production value. Can’t wait to get one.
🤡
Yum
Make more videos like this, great explanations😊
Icemaster 4, has all 4 bombs don't delete my comment, I bought a new one and it has them
The JaDeD cools very fast if you have a good flow rate with cold tap water, and yeah you need to stir it. It’s kind of unfair to put it against plate and counterflow as it’s an entirely different concept of chilling.
A worse way from our testing...
11:32 Ok, but the Spike chiller comes with nothing too. So let's compare apples to apples here. And I would add that the Spike essentials options don't even get the chiller brew ready from what I can tell. OTOH, if you order the Exchillerator with the brew ready option it is good to go out of the box. The Exchillerator Maxx TC Brew Ready option will set you back $384. The Spike chiller with TC and essentials kit is $450 and you still don't have a thermometer.
We just double checked and without fittings (since everyone's setup is different) you're looking at $255 vs $325 for the tri-clamp option. However the Spike chills about 75% quicker and it's just a bunch of Home Depot fittings cobbled together.
When are these going to drop for purchase?
Make sure your on the back in stock email list! We'll be sending out an email on that any day now...
Hello from a UK home brewer. I must say, I'm a precision engineer (Toolmaker) by trade, and I'm mighty impressed with not only the quality of the system, but also the ingenuity. You seem to have thought of, and come up with an answer for everything. Well done on producing a top quality product...... if I had the room, I'd be seriously thinking about getting one shipped over.
What coil is that in the fermenter that has a larger TC in the middle?
Looks amazing guys!!!! We already use your pumps on our 12 gallon propane system. It may be time to upgrade our glycol system!!!! We currently use the "competetion's" systems on both our 12 gallon system and our 1bbl herms system
Love it. These are such great videos. And great to see Caleb showcasing this one. Not only is he your talest team member, but definitely one of your most valuable. Really like what you guys are putting out these days: glycol chiller, grain mill, etc.
Can I trade my chiller in for your chiller.
One of my pumps went out on my Brubuilt and I was able to get a replacement pretty easy from MoreBeer.
How was the install process?
Can't wait to make my purchase!
Looks great guys, can't wait for my kickstarter to ship!
Great video about this brewing system! It was very informative. Quality stuff over there.
Can someone explain to my why this has three tri clamp fittings and one threaded? What sense does that make?
Garden hose inlet for the water
Ok, so why a tri clamp for the water outlet and not another garden hose fitting?
@@stevenbeach748 because most people pump the hot water into their kettles for use with cleaning using the TC hoses used with their system.
To afford this I need more than a dollar 😅
Great products. Wish your stuff would be available in Europe.
I am considering buying 2 of these for my brewery , the only question is ,can it use to pump boiling wort? There is no temperature information
I am considering buying 2 of these for my brewery , the only question is ,can it use to pump boiling wort?
Yes, it can!
Nice
This is beginners question. How do you do the carbonation process with cf15 fermenter? I have a batch fermenting at the moment.
Check out this video: kzread.info/dash/bejne/oGqAk5t-adWTZKg.html
I am very interested in buying this pump but my only concern is that if it would work with a CIP on a 1BBL fermenter. Would the Spike Flow easily clean a 1BBL fermenter or should I be looking for something bigger?
The Flow used with our CIP ball would work perfectly!
@@SpikeBrewing great, thank you very much!