The slides???? Is that a common name for ramps anywhere?
@robertwilson5522Ай бұрын
Would you please include a link to where you buy those locks?
@mustng96462 ай бұрын
If I only saw this before I bought my daughter’s civic , a victim of two events .
@AllPinballFanatic3 ай бұрын
what's a no-wax layer ?
@Eratix3 ай бұрын
2024... my 2020 Civic Si just had a rodent chew through the wires. Still an issue.
@frankwang3013 ай бұрын
This happened to my Honda crvs harness for the power steering. If I went with a splice solution for the wires , how likely is it to fail in the future ?
@dickriggles9424 ай бұрын
I'm having a serious issue that started a couple weeks ago. Car started revving high, put it in brake, car wouldn't shift out of park again. Had to get it toed. Mouse/chipmunk/squirrel got into air filter, chewed it all up. Stuck throttle open. Car was fixed, drove really well. Two weeks later, SAME THING HAPPENS!!!! Gonna be another $250 at least. Do they not want us to drive anymore? This is insanity. I have no choice but to park outside. Is this going to happen until I'm broke? 2001 Honda Civic.
@jamesbarner40324 ай бұрын
I spent $510.00 dollars for the damage. The dealership said I have a rodent problem. They weren't forthcoming with the issue. I've had numerous cars in my driveway for 30 years. It never had happened before. They reimbursed me my money after a negative comment. I can buy a lot of peppermint oil with the money for the next 7 years.
@madmanmechanic88474 ай бұрын
I love the modification but you do realize with the filter mounted side ways when you un screw it all the contaminates grease dirt and metal will spill out and dump right into your clean solvent and contaminate the solvent. I would mount it up right on the out side of the tank so you get 100% filtration but I love what you did looks very nice
@peterrasmussen23845 ай бұрын
And now the DMD is another story, now it should be in full 4:3 mode......
@mechanicalmonster21155 ай бұрын
Are you mispronouncing certain words on purpose?
@michaelj.kastner51655 ай бұрын
Imagine paying the IRS with quarters
@michaelj.kastner51655 ай бұрын
Don’t do it!!!!!!
@themakeruk3925 ай бұрын
BEEN Super Helpfull so glad you shared this video, Thanks
@Pinballroomcville5 ай бұрын
The thumbnails are a bit Clickbaitish
@Pinballroomcville5 ай бұрын
For what we pay for a brand new Stern they should throw the shaker motor in as standard equipment!!
@Pinballroomcville5 ай бұрын
Great video! Super informative, and didn’t know that about JJP. Why are all the back glasses reversed?
@pin-monkeypinball35486 ай бұрын
Do you know of any shaker retrofit for really old games? I'd love to mod in a motor for a 1980 bally Nitro ground shaker.
@douginsuresme6 ай бұрын
Any chance sharing where to find that sound package for nba fastbreak. Sounds awesome and ready to pull the trigger if I can find a sound pack
@Philliefanisback6 ай бұрын
Hey man the last 2 videos you made have been super informative! If you ever plan on doing another video about routing, could you go into some of the challenges you face and explain how you deal with them?
@user-kz5dd4dg2c6 ай бұрын
This is the same damn problem I'm having today. I'll have to fix this tomorrow. I already fixed an ignition coil wire that was chewed last autumn. Thanks for the info! Cheers.
@904PinballZine7 ай бұрын
Pinball Operating on Route is a grind.
@lospaty1018 ай бұрын
i have operated many pinballs in the past, problem is cost of machine / maintenance vs money u getting in. on data east u will have the same types of problems like burned connectors etc on wpc machines u will have the old faithfull press flippers and machine resets... also burned connectors for the gi are common. did operate data east, williams system 11, wpc games like fish tales , terminator etc and some sterns. also pinball parts can be crazy expensive. the worst is the cost of a dmd. operating pinballs is surely a love letter to the world.
@davidcarper54118 ай бұрын
In short, no. Games that require actual skill aren't popular unless the demographic is older than 40-45, and unencumbered by kids.
@matthewmorton73868 ай бұрын
Do you make these business owners sign any sort of contract and you carry insurance on your games?
@matthewmorton73868 ай бұрын
So you take 60%? You never made that clear
@dennisd40278 ай бұрын
Oktoberfest by American pinball seems like no-brainer for bars.
@redrum3r8 ай бұрын
addam's family still matching or out doing new games
@shakilanathoo15478 ай бұрын
Thanks for taking time to post video and helping so many not to make mistake of buying honda cars unfortunately mine is 2021 civic leased and have 2 more yrs to go and if i have an option i would sell it right now!!!!
@mrpsychogreaser8 ай бұрын
As someone who is looking into getting into the hobby after being a lifetime player, I think I will keep all of this stuff in mind while I have these games in my home. Thanks for the info!
@grambo19808 ай бұрын
We got a club with 70 games, that we open up a few times a week. Yeah keeping them maintained is stupid time consuming.
@tonybrown38698 ай бұрын
Don't listen to this negativity, like Nike says, Just Do It! 👆🤡👌
@pinballcabinet8 ай бұрын
What kind of paint did you use???
@skipwheeler17238 ай бұрын
Nice job. Thanks!
@dustincollins169 ай бұрын
2020 accord. Same problem. Wires chewed at the coil packs
@cletusberkeley94419 ай бұрын
What's the verdict on those Chinese Plasma Tables? Any good? I'm looking to buy one 4x8 as a step up to my Langmuir Crossfire Pro 2x2.
@akiles5000110 ай бұрын
Can you say me the model of that monitor of dmd?
@Johnny-Five10 ай бұрын
I’m digging these videos! You can definitely see your passion for the love of pinball and keeping it alive by including it in your routes for guys like me to have a little fun out on the town. There’s four Stern games in my little town in different fast food restaurants and that’s it. I wish there were more routing guys like you here I’d go crazy to get my hands on a Chicago Gaming machine.
@TheDreamX111 ай бұрын
Congrats guys!! I do have a question! I want to open a VR arcade but can not find anything on liscencing or copyright things ! What do I need legally if I buy lets say Pac man, galaga or streetfighter software!! where do I get that copyright liscence!! I really hope you can help out!! I have looked everywhere!!! Thanks and keep it up!!
@wildchild634011 ай бұрын
Great video. I would like to see a video showing your van and how you move machines in and out of locations with the hydraulic table.
@merriesherman71011 ай бұрын
Just got back from having 2019 Honda Civic Sport model repaired at the Honda dealership- I paid $400.00 on Monday and 3 days later, the power steering is chewed up again!! Someone said to put ammonia mixed with water and spray on the wires to repel rodents. I went to 2 stores and they were out of ammonia, so I went to Home Depot and bought Repels All - Animal Repellent.
@nv3217 Жыл бұрын
Any long reviews in this table
@denverbevins4052 Жыл бұрын
All new cars use soy wiring. Spray mint oil around to keep rodents away.
@rsz90182 Жыл бұрын
So I am connecting Hypertherm 1/50 to 1/1 jp1 soldered on the board and 1/1 if I choose to run high voltage directly to the board then I solder 1/50 jp2 on the board. I think the Chinese thought people would not read the manual and input 1/1 voltage and they would have to replace that toasted item. Most people don't RTFM.
@rsz90182 Жыл бұрын
You can run 10,000 volts over a wire thinner than hair without burning out. As long as your current is very very low. 300v with very little to no current drain will not hurt it. Nor will it hurt a person. Unless that wire is thick and can deliver more current.
@libertarianbastard Жыл бұрын
Excellent video, Larry. Many thanks for putting it up.
@trailstokemtb Жыл бұрын
Thanks for sharing this. I’m trying to get a plan together to either open a pinbar or just start with routing games. Edit: I subscribed. This is good info.
@brewmeistersmit Жыл бұрын
Did you ever get this finished?
@brisketnbulgogi_7587 Жыл бұрын
Do you need some sort of license or permit to have machines on location?
@stephanemaroselli1173 Жыл бұрын
Ok, ok ok I don't care about pinballs and I clicked anyway. I'm just a man you know ;)
Пікірлер
The slides???? Is that a common name for ramps anywhere?
Would you please include a link to where you buy those locks?
If I only saw this before I bought my daughter’s civic , a victim of two events .
what's a no-wax layer ?
2024... my 2020 Civic Si just had a rodent chew through the wires. Still an issue.
This happened to my Honda crvs harness for the power steering. If I went with a splice solution for the wires , how likely is it to fail in the future ?
I'm having a serious issue that started a couple weeks ago. Car started revving high, put it in brake, car wouldn't shift out of park again. Had to get it toed. Mouse/chipmunk/squirrel got into air filter, chewed it all up. Stuck throttle open. Car was fixed, drove really well. Two weeks later, SAME THING HAPPENS!!!! Gonna be another $250 at least. Do they not want us to drive anymore? This is insanity. I have no choice but to park outside. Is this going to happen until I'm broke? 2001 Honda Civic.
I spent $510.00 dollars for the damage. The dealership said I have a rodent problem. They weren't forthcoming with the issue. I've had numerous cars in my driveway for 30 years. It never had happened before. They reimbursed me my money after a negative comment. I can buy a lot of peppermint oil with the money for the next 7 years.
I love the modification but you do realize with the filter mounted side ways when you un screw it all the contaminates grease dirt and metal will spill out and dump right into your clean solvent and contaminate the solvent. I would mount it up right on the out side of the tank so you get 100% filtration but I love what you did looks very nice
And now the DMD is another story, now it should be in full 4:3 mode......
Are you mispronouncing certain words on purpose?
Imagine paying the IRS with quarters
Don’t do it!!!!!!
BEEN Super Helpfull so glad you shared this video, Thanks
The thumbnails are a bit Clickbaitish
For what we pay for a brand new Stern they should throw the shaker motor in as standard equipment!!
Great video! Super informative, and didn’t know that about JJP. Why are all the back glasses reversed?
Do you know of any shaker retrofit for really old games? I'd love to mod in a motor for a 1980 bally Nitro ground shaker.
Any chance sharing where to find that sound package for nba fastbreak. Sounds awesome and ready to pull the trigger if I can find a sound pack
Hey man the last 2 videos you made have been super informative! If you ever plan on doing another video about routing, could you go into some of the challenges you face and explain how you deal with them?
This is the same damn problem I'm having today. I'll have to fix this tomorrow. I already fixed an ignition coil wire that was chewed last autumn. Thanks for the info! Cheers.
Pinball Operating on Route is a grind.
i have operated many pinballs in the past, problem is cost of machine / maintenance vs money u getting in. on data east u will have the same types of problems like burned connectors etc on wpc machines u will have the old faithfull press flippers and machine resets... also burned connectors for the gi are common. did operate data east, williams system 11, wpc games like fish tales , terminator etc and some sterns. also pinball parts can be crazy expensive. the worst is the cost of a dmd. operating pinballs is surely a love letter to the world.
In short, no. Games that require actual skill aren't popular unless the demographic is older than 40-45, and unencumbered by kids.
Do you make these business owners sign any sort of contract and you carry insurance on your games?
So you take 60%? You never made that clear
Oktoberfest by American pinball seems like no-brainer for bars.
addam's family still matching or out doing new games
Thanks for taking time to post video and helping so many not to make mistake of buying honda cars unfortunately mine is 2021 civic leased and have 2 more yrs to go and if i have an option i would sell it right now!!!!
As someone who is looking into getting into the hobby after being a lifetime player, I think I will keep all of this stuff in mind while I have these games in my home. Thanks for the info!
We got a club with 70 games, that we open up a few times a week. Yeah keeping them maintained is stupid time consuming.
Don't listen to this negativity, like Nike says, Just Do It! 👆🤡👌
What kind of paint did you use???
Nice job. Thanks!
2020 accord. Same problem. Wires chewed at the coil packs
What's the verdict on those Chinese Plasma Tables? Any good? I'm looking to buy one 4x8 as a step up to my Langmuir Crossfire Pro 2x2.
Can you say me the model of that monitor of dmd?
I’m digging these videos! You can definitely see your passion for the love of pinball and keeping it alive by including it in your routes for guys like me to have a little fun out on the town. There’s four Stern games in my little town in different fast food restaurants and that’s it. I wish there were more routing guys like you here I’d go crazy to get my hands on a Chicago Gaming machine.
Congrats guys!! I do have a question! I want to open a VR arcade but can not find anything on liscencing or copyright things ! What do I need legally if I buy lets say Pac man, galaga or streetfighter software!! where do I get that copyright liscence!! I really hope you can help out!! I have looked everywhere!!! Thanks and keep it up!!
Great video. I would like to see a video showing your van and how you move machines in and out of locations with the hydraulic table.
Just got back from having 2019 Honda Civic Sport model repaired at the Honda dealership- I paid $400.00 on Monday and 3 days later, the power steering is chewed up again!! Someone said to put ammonia mixed with water and spray on the wires to repel rodents. I went to 2 stores and they were out of ammonia, so I went to Home Depot and bought Repels All - Animal Repellent.
Any long reviews in this table
All new cars use soy wiring. Spray mint oil around to keep rodents away.
So I am connecting Hypertherm 1/50 to 1/1 jp1 soldered on the board and 1/1 if I choose to run high voltage directly to the board then I solder 1/50 jp2 on the board. I think the Chinese thought people would not read the manual and input 1/1 voltage and they would have to replace that toasted item. Most people don't RTFM.
You can run 10,000 volts over a wire thinner than hair without burning out. As long as your current is very very low. 300v with very little to no current drain will not hurt it. Nor will it hurt a person. Unless that wire is thick and can deliver more current.
Excellent video, Larry. Many thanks for putting it up.
Thanks for sharing this. I’m trying to get a plan together to either open a pinbar or just start with routing games. Edit: I subscribed. This is good info.
Did you ever get this finished?
Do you need some sort of license or permit to have machines on location?
Ok, ok ok I don't care about pinballs and I clicked anyway. I'm just a man you know ;)