Model Car Muse with Doug Whyte. Discovering what drives us to build. Stories of the modelers and their inspirations, Model community history and events, Building techniques and approaches.
A very useful video for every photographer. It contains solid and detailed information. It is one of the most beautiful videos on KZread. What is the camera setup that you used for this video,Thank you very much.
@ModelCarMuse14 сағат бұрын
Thanks, glad you liked it! The videographer used a basic DSLR, Fuji, sometimes on a tripod, sometimes hand-held.
@rickcrammond6330Күн бұрын
I like how seriously you guys take this hobby too. I just built my first model, I'm 74 years old and should have started with an easier project. It looks okay on a high-shelf 🤫
@ModelCarMuse15 сағат бұрын
Welcome to the Hobby! Have fun!!
@mikesmodscustoms2 күн бұрын
Wow!!! Absolutlety amazing craftsmanship!
@javi58272 күн бұрын
Thanks for the tutorial! How we can make it with metal diecast models?
@michaelhintzmikesminiature18122 күн бұрын
Beautiful Truck!!!! Thanks for sharing
@modelcar15892 күн бұрын
Awesome truck
@charlenebutterfield52802 күн бұрын
Thanks for feed back. glad you liked it.
@CycolacFan2 күн бұрын
There’s nothing like hearing from someone who owns the 1:1 vehicle exactly which kit parts are the most accurate. I’d love to see more detail on how that hood hinge mechanism operates.
@charlenebutterfield52802 күн бұрын
Take a look at the design of a real 56 ford pickup hinge. On the model, the top rod of the hinge is attached to the hood and pivots at the side of the fire wall just like the 1:1 hinge would . The lower rod on the model attaches to the hood like it would on the 1:1 truck. This rod is made about twice as long (in scale) as the bottom rod of the real hinge. On the side of the fire wall below where the top rod is attached is a pin that is sticking out about 1 mm. The long lower rod has a notch in it that falls on to the pin when the hood opens. To shut the hood the model is turned over and the lower rod falls away from the pin and as the hood closes the back half of the lower rod goes into a slot beside the fender at the cowl. the lower rod slides between the outside of the pickup cab and the kick panel in the interior. the hinge rods were made out of aluminum sheet. There you have it.
@scaleffect3 күн бұрын
Impressive work and nice interview
@charlenebutterfield52802 күн бұрын
Thanks for your comments. Doug did a great job of editing the interview.
@ModelCarMuse23 сағат бұрын
Thanks, except it's actually my wife, Giovanna, who is does all the editing. She is a story-teller.
@357RD6string3 күн бұрын
Thank you for taking the time to show this technique!
@bkmodelcars3 күн бұрын
Beautifully done
@charlenebutterfield52802 күн бұрын
Thank you. And thanks for commenting
@MODELMIND723 күн бұрын
Super Sweet Styrene '56 Goodness!
@charlenebutterfield52802 күн бұрын
Thank you.
@daviddarby69863 күн бұрын
Well Don, Ron! And Doug - another one right out of the park, sir!
@charlenebutterfield52802 күн бұрын
Glad you liked it. I am honored to be included in Doug's channel.
@THROTTLEPOWER4 күн бұрын
Enjoyed!!!! 🤜🤛
@charlenebutterfield52802 күн бұрын
Thanks. I watch all your contest coverage videos. Nice work. You and I met at the IPMS Nationals in Omaha a couple years ago.
@ronstewart97924 күн бұрын
Awesome pickup Doug. I saw that he had a Nebraska plate on it. Does he live in Nebraska? Ron
@charlenebutterfield52804 күн бұрын
I live in Omaha
@ronstewart97924 күн бұрын
Awesome, I live in Broken Bow if you know where that is.
@kipphawley45144 күн бұрын
Hey, I have a good question. Would you have any ideas on where would most states would have an appraisal for small scale Models cars only? Because of that, I have a few very older models of cars that my Dad's fathers did some small-scale models cars from the early years of the 20s or so. I would wonder if possible that you have an email address for people like me able to send you pictures of their models' cars. If so, where us people would be able to find it. On your KZread video clip.?
@ModelCarMuse4 күн бұрын
Perhaps try some antique dealers in your area.
@ABCD-asdf4 күн бұрын
Great!!!!!!!!!! Looking forward to and hoping for many gsl interviews! Do you still have the interview of Jay coburns about his pacecars, I can't find it anymore.
@tint6614 күн бұрын
Wow. Impressive. Nice work.
@charlenebutterfield52802 күн бұрын
Glad you liked it. Thanks for the feed back.
@jamesscott3464 күн бұрын
Amazing ❤
@charlenebutterfield52802 күн бұрын
Thank you. Glad you like it.
@kenmorris28584 күн бұрын
Killer Ford F100.
@charlenebutterfield52802 күн бұрын
Thank you. Glad you liked it.
@errollpalmer95684 күн бұрын
Another great video from GSL. You must've been a busy man with all these GSL interviews. I have lost count but hope to see more. Thanks Doug.
@raymondblasee10484 күн бұрын
Wow! Lot of great ideas using a bunch of other 50s Ford pick up parts and body components to make one EPIC 56 F 100 truck!!!! Fantastic!!!
@charlenebutterfield52802 күн бұрын
Thanks. the good thing about the AMT 53 Ford pickup is that it has been around a long time so there are a lot of cheap glue bombs available to harvest the fenders, inner fenders, hood, frame and tail gate from.
@BillyStrangeAutoModels4 күн бұрын
Wonderful work!
@frizzosmodels4 күн бұрын
Very detailed ford !! love it !!
@alancyr31004 күн бұрын
That is an awesome build! Great details. Thanks for sharing.
@garyslentzii27964 күн бұрын
Fantastic work all around. Looking forward to the next videos.
@ScaleDreamsStudio4 күн бұрын
Great Idea for the window molding.
@charlenebutterfield52802 күн бұрын
Thanks. The wire I used was aluminum bead wire from hobby lobby.
@ScaleDreamsStudio2 күн бұрын
@@charlenebutterfield5280 Great looking build!
@ModelCarMuse4 күн бұрын
A video of the other pickup Ron displayed at GSL will be in an upcoming video! Thank you, Ron, for sharing your replica with us. Thank you to our Tier 5 Patron, Mark S. Gustavson, Esq.
@charlenebutterfield52802 күн бұрын
Hi Doug. Thank you so much for including me on your channel. I am truly honored. You did a fabulous job editing our conversation and I look forward to seeing the 48 Ranchero video
@sydneymartin9524 күн бұрын
What a great video, was wondering do you cut the metal once it's in the ring or did you leave it long and fill the front under the hood?
@ModelCarMuse4 күн бұрын
Thanks! I always cut the “handle” off so I can make room for the engine and radiator. I have not gone farther on this model yet, but when I do the grille will look like the finished grille I popped out of the Dodge in the video.
@oneteamgarage5 күн бұрын
Absolutely incredible work Doug! Phenomenal job 💯🔥🙌🏾
@hvychvy200112 күн бұрын
Beautiful build!! Can I ask what kit does the original wheels you were looking to use are in?”the Buick’s”
@ModelCarMuse5 күн бұрын
Thanks! The wire wheels were in the AMT Buick Riviera kit.
@ScaleDreamsStudio12 күн бұрын
I never thought of using a 6x7 film carrier to hold plastic for vacuum forming.
@ModelCarMuse5 күн бұрын
You have an eagle eye and some good old-time knowledge!
@ITman3Dmain12 күн бұрын
Super
@geekdiggy13 күн бұрын
12:13 describes me perfectly. i'm just getting back into the hobby after being away from it for 25 years (builder as a teenager but then life got in the way.) i don't know enough to understand what i'm seeing, all i know is it doesn't look like a model. it looks like a shrunken real car. i know enough to understand there's a difference. this looks amazing.
@cruzer212314 күн бұрын
That was awesome Doug!!!!!
@JK_Chapman14 күн бұрын
Wishing all the best to Steve!
@johnnymayo853414 күн бұрын
The midget is looking great!! Great idea for the BMF! Once you get the engine wired, people will not notice the slightly off-centered plug holes! I like your idea about the bolts around the seat....should look good! I follow Doug Whyte's 'Model Car Muse' YT channel. He just posted a video about how to make grills....it's a pretty cool process!
@KitbashedKustoms14 күн бұрын
Yeah!!! This is just what i need!! Great how to video! I have a build that has got stuck cause i didnt know how i should do the grill! Now i know! Thank you so much for this!
@jean-guylebreton533215 күн бұрын
Excellent job and lots of patience
@ericverpeten850315 күн бұрын
Awesome video !
@NitroModelsAndComics16 күн бұрын
I have a hobby room, Doug you have a hobby center.
@19chinaman6216 күн бұрын
What a great way to make grilles WAUW, thanks for teaching us how to do this 👍👍👍👍👍👍👍
@CountryDick16 күн бұрын
I’m throwing all my models out.
@michaelcooke255916 күн бұрын
Very nice technique. Thanks for sharing.
@johnnytoronto106616 күн бұрын
Go with the canoe. You'll need a rack made of a pair of oak boards 1.5x2.5 inches, mounted about 3 inches above the roof. Soon I'll be trecking my 17 foot cedar strip canoe on top of my '27 Model A woody. It's a wow, trust me!
@ModelCarMuse16 күн бұрын
"17 foot cedar strip canoe on top of my '27 Model A woody" I can just picture it, really cool!
@billmcevoy24116 күн бұрын
Thank you so much for this tutorial, I have long wondered how to accomplish a realistic grille. It know it possible!
@buddywhatshisfacescalemode731417 күн бұрын
That was great!
@J2ROOSTER17 күн бұрын
I can appreciate the time and technique to make the grill. But what if your model has an engine in it?
@ModelCarMuse16 күн бұрын
I didn’t get to doing it in this video but eventually the “handle” part gets cut off. The track nose I made in the tutorial will eventually look like the one in the primered Dodge I popped out at the beginning of the video to show the ring surround. I am planning to put an engine in the Dodge. The grille on the C2 Corvette Custom was made the same way, and still has the bolts in it, and is in front of the engine. You can see how it was made in this video: kzread.info/dash/bejne/qa1oxKWvndHUhLA.html.
@KarlScaleModeling17 күн бұрын
That's awesome, thanks for sharing this tutorial with us all 👍🏼👍🏼
@kenmorris285817 күн бұрын
Brilliant workmanship. Many thanks from Halifax, Nova Scotia....
Пікірлер
A very useful video for every photographer. It contains solid and detailed information. It is one of the most beautiful videos on KZread. What is the camera setup that you used for this video,Thank you very much.
Thanks, glad you liked it! The videographer used a basic DSLR, Fuji, sometimes on a tripod, sometimes hand-held.
I like how seriously you guys take this hobby too. I just built my first model, I'm 74 years old and should have started with an easier project. It looks okay on a high-shelf 🤫
Welcome to the Hobby! Have fun!!
Wow!!! Absolutlety amazing craftsmanship!
Thanks for the tutorial! How we can make it with metal diecast models?
Beautiful Truck!!!! Thanks for sharing
Awesome truck
Thanks for feed back. glad you liked it.
There’s nothing like hearing from someone who owns the 1:1 vehicle exactly which kit parts are the most accurate. I’d love to see more detail on how that hood hinge mechanism operates.
Take a look at the design of a real 56 ford pickup hinge. On the model, the top rod of the hinge is attached to the hood and pivots at the side of the fire wall just like the 1:1 hinge would . The lower rod on the model attaches to the hood like it would on the 1:1 truck. This rod is made about twice as long (in scale) as the bottom rod of the real hinge. On the side of the fire wall below where the top rod is attached is a pin that is sticking out about 1 mm. The long lower rod has a notch in it that falls on to the pin when the hood opens. To shut the hood the model is turned over and the lower rod falls away from the pin and as the hood closes the back half of the lower rod goes into a slot beside the fender at the cowl. the lower rod slides between the outside of the pickup cab and the kick panel in the interior. the hinge rods were made out of aluminum sheet. There you have it.
Impressive work and nice interview
Thanks for your comments. Doug did a great job of editing the interview.
Thanks, except it's actually my wife, Giovanna, who is does all the editing. She is a story-teller.
Thank you for taking the time to show this technique!
Beautifully done
Thank you. And thanks for commenting
Super Sweet Styrene '56 Goodness!
Thank you.
Well Don, Ron! And Doug - another one right out of the park, sir!
Glad you liked it. I am honored to be included in Doug's channel.
Enjoyed!!!! 🤜🤛
Thanks. I watch all your contest coverage videos. Nice work. You and I met at the IPMS Nationals in Omaha a couple years ago.
Awesome pickup Doug. I saw that he had a Nebraska plate on it. Does he live in Nebraska? Ron
I live in Omaha
Awesome, I live in Broken Bow if you know where that is.
Hey, I have a good question. Would you have any ideas on where would most states would have an appraisal for small scale Models cars only? Because of that, I have a few very older models of cars that my Dad's fathers did some small-scale models cars from the early years of the 20s or so. I would wonder if possible that you have an email address for people like me able to send you pictures of their models' cars. If so, where us people would be able to find it. On your KZread video clip.?
Perhaps try some antique dealers in your area.
Great!!!!!!!!!! Looking forward to and hoping for many gsl interviews! Do you still have the interview of Jay coburns about his pacecars, I can't find it anymore.
Wow. Impressive. Nice work.
Glad you liked it. Thanks for the feed back.
Amazing ❤
Thank you. Glad you like it.
Killer Ford F100.
Thank you. Glad you liked it.
Another great video from GSL. You must've been a busy man with all these GSL interviews. I have lost count but hope to see more. Thanks Doug.
Wow! Lot of great ideas using a bunch of other 50s Ford pick up parts and body components to make one EPIC 56 F 100 truck!!!! Fantastic!!!
Thanks. the good thing about the AMT 53 Ford pickup is that it has been around a long time so there are a lot of cheap glue bombs available to harvest the fenders, inner fenders, hood, frame and tail gate from.
Wonderful work!
Very detailed ford !! love it !!
That is an awesome build! Great details. Thanks for sharing.
Fantastic work all around. Looking forward to the next videos.
Great Idea for the window molding.
Thanks. The wire I used was aluminum bead wire from hobby lobby.
@@charlenebutterfield5280 Great looking build!
A video of the other pickup Ron displayed at GSL will be in an upcoming video! Thank you, Ron, for sharing your replica with us. Thank you to our Tier 5 Patron, Mark S. Gustavson, Esq.
Hi Doug. Thank you so much for including me on your channel. I am truly honored. You did a fabulous job editing our conversation and I look forward to seeing the 48 Ranchero video
What a great video, was wondering do you cut the metal once it's in the ring or did you leave it long and fill the front under the hood?
Thanks! I always cut the “handle” off so I can make room for the engine and radiator. I have not gone farther on this model yet, but when I do the grille will look like the finished grille I popped out of the Dodge in the video.
Absolutely incredible work Doug! Phenomenal job 💯🔥🙌🏾
Beautiful build!! Can I ask what kit does the original wheels you were looking to use are in?”the Buick’s”
Thanks! The wire wheels were in the AMT Buick Riviera kit.
I never thought of using a 6x7 film carrier to hold plastic for vacuum forming.
You have an eagle eye and some good old-time knowledge!
Super
12:13 describes me perfectly. i'm just getting back into the hobby after being away from it for 25 years (builder as a teenager but then life got in the way.) i don't know enough to understand what i'm seeing, all i know is it doesn't look like a model. it looks like a shrunken real car. i know enough to understand there's a difference. this looks amazing.
That was awesome Doug!!!!!
Wishing all the best to Steve!
The midget is looking great!! Great idea for the BMF! Once you get the engine wired, people will not notice the slightly off-centered plug holes! I like your idea about the bolts around the seat....should look good! I follow Doug Whyte's 'Model Car Muse' YT channel. He just posted a video about how to make grills....it's a pretty cool process!
Yeah!!! This is just what i need!! Great how to video! I have a build that has got stuck cause i didnt know how i should do the grill! Now i know! Thank you so much for this!
Excellent job and lots of patience
Awesome video !
I have a hobby room, Doug you have a hobby center.
What a great way to make grilles WAUW, thanks for teaching us how to do this 👍👍👍👍👍👍👍
I’m throwing all my models out.
Very nice technique. Thanks for sharing.
Go with the canoe. You'll need a rack made of a pair of oak boards 1.5x2.5 inches, mounted about 3 inches above the roof. Soon I'll be trecking my 17 foot cedar strip canoe on top of my '27 Model A woody. It's a wow, trust me!
"17 foot cedar strip canoe on top of my '27 Model A woody" I can just picture it, really cool!
Thank you so much for this tutorial, I have long wondered how to accomplish a realistic grille. It know it possible!
That was great!
I can appreciate the time and technique to make the grill. But what if your model has an engine in it?
I didn’t get to doing it in this video but eventually the “handle” part gets cut off. The track nose I made in the tutorial will eventually look like the one in the primered Dodge I popped out at the beginning of the video to show the ring surround. I am planning to put an engine in the Dodge. The grille on the C2 Corvette Custom was made the same way, and still has the bolts in it, and is in front of the engine. You can see how it was made in this video: kzread.info/dash/bejne/qa1oxKWvndHUhLA.html.
That's awesome, thanks for sharing this tutorial with us all 👍🏼👍🏼
Brilliant workmanship. Many thanks from Halifax, Nova Scotia....
Cool